ARM: dts: imx: share pad macro names between imx6q and imx6dl

The imx6q and imx6dl are two pin-to-pin compatible SoCs.  The same board
design can work with either chip plugged into the socket, e.g. sabresd
and sabreauto boards.

We currently define pin groups in imx6q.dtsi and imx6dl.dtsi
respectively because the pad macro names are different between two
chips.  This brings a maintenance burden on having the same label point
to the same pin group defined in two places.

The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs
pad macro names.  Then the pin groups becomes completely common between
imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the
long term maintenance of imx6q/dt pin settings becomes easier.

Unfortunately, the change brings some dramatic diff stat, but it's all
about DTS file, and the ultimate net diff stat is good.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 0 insertions, 19 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 0038228c508c..5e62c2427b07 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -19,22 +19,3 @@
 	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
 	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6Q_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
-};