diff options
| author | Troy Kisky <troy.kisky@boundarydevices.com> | 2013-12-17 02:12:56 +0100 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2014-02-09 14:29:26 +0100 |
| commit | f3b0ea6118b43ee6fa97fae7c3a5a63559130140 (patch) | |
| tree | 3f9bdc3f3e05adb5ea30381f123663b604378fc7 /arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | |
| parent | ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg (diff) | |
| download | linux-f3b0ea6118b43ee6fa97fae7c3a5a63559130140.tar.xz linux-f3b0ea6118b43ee6fa97fae7c3a5a63559130140.zip | |
ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet.
It also explicitly sets the pad to 0x000b0.
Before this patch, it has the value 0x1b0b0 if using mainline u-boot.
So this patch also removes hysteresis and a 100K pullup since the pad
is always an output.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 9b78cf828584..bbc05830c431 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -114,7 +114,6 @@ imx6q-sabrelite { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; @@ -155,6 +154,8 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Phy reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 >; }; |