diff options
| author | Steve Longerbeam <slongerbeam@gmail.com> | 2017-06-12 20:23:58 +0200 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2017-06-14 17:08:05 +0200 |
| commit | 4c8777892e80bbe39efd0584502793b4b244f99b (patch) | |
| tree | 9dd54c8b8e963d68a89201cde84549070b1b3d84 /arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | |
| parent | ARM: dts: imx6qdl: add capture-subsystem device (diff) | |
| download | linux-4c8777892e80bbe39efd0584502793b4b244f99b.tar.xz linux-4c8777892e80bbe39efd0584502793b4b244f99b.zip | |
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
There is a pin conflict with GPIO_6. This pin functions as a power
input pin to the OV5642 camera sensor, but ENET uses it as the h/w
workaround for erratum ERR006687, to wake-up the ARM cores on normal
RX and TX packet done events. So we need to remove the h/w workaround
to support the OV5642. The result is that the CPUidle driver will no
longer allow entering the deep idle states on the sabrelite.
This is a partial revert of
commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
interrupt.")
commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
for ERR006687")
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-sabrelite.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 |
1 files changed, 0 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 84131794e97b..89dce27dfbad 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -270,9 +270,6 @@ txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; @@ -373,7 +370,6 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; |