Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.15" from Shawn Guo:

 - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
   TX modules for MB7 from  Ka-Ro Electronics, i.MX6 Wandboard revd1
   variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
   Vining-2000 board.
 - Use the 'vpcie-supply' property for PCIe device for boards
   imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
 - A series from Jagan Teki to update imx6qdl-icore board with audio,
   touch and CAN support.
 - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
   tempmon support for i.MX6UL.
 - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
   and i.MX6 TX modules.
 - Fix DTC warnings in i.MX device trees, dropping leading zeros from
   unit address, correcting display nodes notation and display port
   names, fixing nodes with unit name and no reg property.
 - Other random device updates for various board support.

* tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
  ARM: dts: imx53-tx53: fix interrupt flags
  ARM: dts: imx28-tx28: fix interrupt flags
  ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
  ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
  ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
  ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
  ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
  ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
  ARM: dts: imx: add ZII RDU1 board
  ARM: dts: imx: add support for TX6 modules on MB7 baseboard
  ARM: dts: imx: add support for TX6QP
  ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
  ARM: dts: imx6-tx6: move display configuration to .dtsi file
  ARM: dts: imx6-tx6: add support for I2C bus recovery
  ARM: dts: imx6-tx6: convert to using simple-audio-card
  ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
  ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
  ARM: dts: imx6-tx6: add trickle-charge config for DS1339
  ARM: dts: imx6-tx6: remove obsolete ipu1 alias
  ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
  ...

[arnd: made sure we have no new leading zeroes in unit address during merge]

1 files changed, 86 insertions, 18 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 25fe6aef797b..6abb66cd7d4a 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,6 +43,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	aliases {
@@ -145,7 +146,7 @@
 		pinctrl-0 = <&pinctrl_lcd0_pwr>;
 		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-boot-on;
+		status = "disabled";
 	};
 
 	reg_lcd1_pwr: regulator-lcd1-pwr {
@@ -157,7 +158,7 @@
 		pinctrl-0 = <&pinctrl_lcd1_pwr>;
 		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-boot-on;
+		status = "disabled";
 	};
 
 	reg_usbh1_vbus: regulator-usbh1-vbus {
@@ -183,24 +184,56 @@
 	};
 
 	sound {
-		compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
+		compatible = "karo,imx6qdl-tx6-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audmux>;
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 };
 
 &audmux {
 	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
 };
 
 &can1 {
@@ -241,7 +274,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>,
@@ -249,6 +282,7 @@
 	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-reset-post-delay = <10>;
 	phy-handle = <&etnphy>;
 	phy-supply = <&reg_3v3_etn>;
 	status = "okay";
@@ -261,8 +295,9 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet_mdio>;
-			interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-0 = <&pinctrl_etnphy_int>;
+			interrupt-parent = <&gpio7>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 };
@@ -276,25 +311,34 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 	clock-frequency = <400000>;
 	status = "okay";
 
 	ds1339: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
 	};
 };
 
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 	clock-frequency = <400000>;
 	status = "okay";
 
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
@@ -332,8 +376,6 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
 		>;
 	};
@@ -451,12 +493,24 @@
 		>;
 	};
 
+	pinctrl_etnphy_int: etnphy-intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+		>;
+	};
+
 	pinctrl_etnphy_power: etnphy-pwrgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
 		>;
 	};
 
+	pinctrl_etnphy_rst: etnphy-rstgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
@@ -504,6 +558,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
@@ -511,6 +572,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
 	pinctrl_kpp: kppgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1