Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 146 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
new file mode 100644
index 000000000000..e3c0b63c2205
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX Sabre Auto Board";
+	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakup;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6x-sabreauto {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+	};
+};