summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/meson8b-mxq.dts
diff options
context:
space:
mode:
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>2019-05-24 20:19:36 +0200
committerKevin Hilman <khilman@baylibre.com>2019-06-04 00:16:29 +0200
commitd94f60e3dfa0ac72aaa82352652ed76cece4d9ab (patch)
treebe6f9bef11723f04f5ce89bedf5291e0025446d6 /arch/arm/boot/dts/meson8b-mxq.dts
parentARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU (diff)
downloadlinux-d94f60e3dfa0ac72aaa82352652ed76cece4d9ab.tar.xz
linux-d94f60e3dfa0ac72aaa82352652ed76cece4d9ab.zip
ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805
The TRONFY MXQ comes with either 1GB or 2GB RAM. Both variants share (like most boards based on Amlogic reference designs): - 10/100 PHY (IC Plus IP101GR) with GPIOH_4 being the reset line and GPIOH_3 the interrupt line - SD card slot with the card detection GPIO at CARD_6 - VCCK is generated by PWM_C with a period of 1148ns and XTAL as input clock - USB OTG exposed on one of the USB-A connectors - 4-port USB hub with 3 ports exposed to the outside There seem the multiple board revision out there according to various forum posts: - storage: eMMC or NAND flash - wifi: Ampak AP6210 or Realtek 8189 Add support for the following functionality: - SoC temperature (hwmon) - changing the CPU voltage - Ethernet connectivity - SD card - USB Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: hexdump <hexdump0815@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Diffstat (limited to 'arch/arm/boot/dts/meson8b-mxq.dts')
-rw-r--r--arch/arm/boot/dts/meson8b-mxq.dts139
1 files changed, 139 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 08ddd7fb0bf8..07f1cc513f8a 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -45,6 +45,9 @@
*/
/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
#include "meson8b.dtsi"
/ {
@@ -63,6 +66,126 @@
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwms = <&pwm_cd 0 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc_5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+&ethmac {
+ status = "okay";
+
+ pinctrl-0 = <&eth_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOH_4 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101A/G (0x02430c54) */
+ reg = <0>;
+ icplus,select-interrupt;
+ interrupt-parent = <&gpio_intc>;
+ /* GPIOH_3 */
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
};
&uart_AO {
@@ -70,3 +193,19 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};