Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
new file mode 100644
index 000000000000..a22ffe633b49
--- /dev/null
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/boot/nspire.dtsi
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	bootrom: bootrom@00000000 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@A4000000 {
+		device = "memory";
+		reg = <0xA4000000 0x20000>;
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@A9000000 {
+			reg = <0xA9000000 0x1000>;
+		};
+
+		usb0: usb@B0000000 {
+			reg = <0xB0000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		usb1: usb@B4000000 {
+			reg = <0xB4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@C0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <21>;
+
+			clocks = <&apb_pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		adc: adc@C4000000 {
+			reg = <0xC4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@C8010000 {
+			reg = <0xC8010000 0x1000>;
+		};
+
+		sha256: crypto@CC000000 {
+			reg = <0xCC000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900C0000 {
+				reg = <0x900C0000 0x1000>;
+
+				clocks = <&timer_clk>;
+			};
+
+			timer1: timer@900D0000 {
+				reg = <0x900D0000 0x1000>;
+				interrupts = <19>;
+
+				clocks = <&timer_clk>;
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,amba-primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900A0000 {
+				reg = <0x900A0000 0x1000>;
+			};
+
+			pwr: pwr@900B0000 {
+				reg = <0x900B0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900E0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900E0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900F0000 {
+				reg = <0x900F0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};