Merge branch 'drivers/mmc' into next/dt2

Changes in the dt2 branch move stuff around that gets changed
in the drivers/mmc branch. I chose a non-obvious resolution by
adding the new bus-width property into all the tegra sdhci device
nodes.

Conflicts:
	arch/arm/boot/dts/tegra-cardhu.dts
	arch/arm/boot/dts/tegra-harmony.dts
	arch/arm/boot/dts/tegra-ventana.dts

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 97 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b2bf42..a1dd873425fc 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -17,4 +17,101 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vdd_eth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	eth@0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	bus-width = <4>;
+	ti,non-removable;
 };