Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...

1 files changed, 119 insertions, 22 deletions

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index cc1a07a3620f..2485496297e3 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -6,9 +6,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/omap4.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap4.h>
 
 / {
 	compatible = "ti,omap4430", "ti,omap4";
@@ -143,8 +146,11 @@
 			ranges = <0 0x4a000000 0x1000000>;
 
 			cm1: cm1@4000 {
-				compatible = "ti,omap4-cm1";
+				compatible = "ti,omap4-cm1", "simple-bus";
 				reg = <0x4000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x4000 0x2000>;
 
 				cm1_clocks: clocks {
 					#address-cells = <1>;
@@ -156,8 +162,11 @@
 			};
 
 			cm2: cm2@8000 {
-				compatible = "ti,omap4-cm2";
+				compatible = "ti,omap4-cm2", "simple-bus";
 				reg = <0x8000 0x3000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x8000 0x3000>;
 
 				cm2_clocks: clocks {
 					#address-cells = <1>;
@@ -243,6 +252,9 @@
 					compatible = "ti,omap4-prm";
 					reg = <0x6000 0x3000>;
 					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x6000 0x3000>;
 
 					prm_clocks: clocks {
 						#address-cells = <1>;
@@ -388,6 +400,13 @@
 			reg = <0x48076000 0x4>,
 			      <0x48076010 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x48076000 0x001000>;
@@ -458,9 +477,15 @@
 		target-module@4a0db000 {
 			compatible = "ti,sysc-sr";
 			ti,hwmods = "smartreflex_iva";
-			reg = <0x4a0db000 0x4>,
-			      <0x4a0db008 0x4>;
-			reg-names = "rev", "sysc";
+			reg = <0x4a0db038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a0db000 0x001000>;
@@ -475,9 +500,15 @@
 		target-module@4a0dd000 {
 			compatible = "ti,sysc-sr";
 			ti,hwmods = "smartreflex_core";
-			reg = <0x4a0dd000 0x4>,
-			      <0x4a0dd008 0x4>;
-			reg-names = "rev", "sysc";
+			reg = <0x4a0dd038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a0dd000 0x001000>;
@@ -492,9 +523,15 @@
 		target-module@4a0d9000 {
 			compatible = "ti,sysc-sr";
 			ti,hwmods = "smartreflex_mpu";
-			reg = <0x4a0d9000 0x4>,
-			      <0x4a0d9008 0x4>;
-			reg-names = "rev", "sysc";
+			reg = <0x4a0d9038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a0d9000 0x001000>;
@@ -674,7 +711,7 @@
 			reg-names = "sys", "gdd";
 			ti,hwmods = "hsi";
 
-			clocks = <&hsi_fck>;
+			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
 			clock-names = "hsi_fck";
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
@@ -715,6 +752,18 @@
 			reg = <0x52000000 0x4>,
 			      <0x52000010 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
+			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x52000000 0x1000000>;
@@ -819,8 +868,15 @@
 		target-module@40128000 {
 			compatible = "ti,sysc-mcasp";
 			ti,hwmods = "mcasp";
-			reg = <0x40128004 0x4>;
-			reg-names = "sysc";
+			reg = <0x40128000 0x4>,
+			      <0x40128004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
@@ -840,6 +896,13 @@
 			reg = <0x4012c000 0x4>,
 			      <0x4012c010 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
@@ -854,6 +917,15 @@
 			reg = <0x401f1000 0x4>,
 			      <0x401f1010 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
@@ -960,6 +1032,16 @@
 			reg = <0x4a10a000 0x4>,
 			      <0x4a10a010 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-delay-us = <2>;
+			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a10a000 0x1000>;
@@ -973,6 +1055,8 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
+			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+			clock-names = "fck";
 		};
 
 		timer2: timer@48032000 {
@@ -1187,6 +1271,16 @@
 			reg = <0x5601fc00 0x4>,
 			      <0x5601fc10 0x4>;
 			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
@@ -1202,7 +1296,7 @@
 			reg = <0x58000000 0x80>;
 			status = "disabled";
 			ti,hwmods = "dss_core";
-			clocks = <&dss_dss_clk>;
+			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1213,7 +1307,7 @@
 				reg = <0x58001000 0x1000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
 				clock-names = "fck";
 			};
 
@@ -1222,7 +1316,7 @@
 				reg = <0x58002000 0x1000>;
 				status = "disabled";
 				ti,hwmods = "dss_rfbi";
-				clocks = <&dss_dss_clk>, <&l3_div_ck>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
 				clock-names = "fck", "ick";
 			};
 
@@ -1231,7 +1325,7 @@
 				reg = <0x58003000 0x1000>;
 				status = "disabled";
 				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_clk>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
 				clock-names = "fck";
 			};
 
@@ -1244,7 +1338,8 @@
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
 				clock-names = "fck", "sys_clk";
 			};
 
@@ -1257,7 +1352,8 @@
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
 				clock-names = "fck", "sys_clk";
 			};
 
@@ -1271,7 +1367,8 @@
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+					 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
 				clock-names = "fck", "sys_clk";
 				dmas = <&sdma 76>;
 				dma-names = "audio_tx";
@@ -1280,4 +1377,4 @@
 	};
 };
 
-/include/ "omap44xx-clocks.dtsi"
+#include "omap44xx-clocks.dtsi"