summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap5-uevm.dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-11 00:06:26 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-11 00:06:26 +0100
commitc0d6fe2f01c475cc137d90607a07578586883df8 (patch)
tree361136e8c1f66aef29f468abbd08e65de6f2e654 /arch/arm/boot/dts/omap5-uevm.dts
parentMerge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/a... (diff)
parentMerge branch 'next/arm64' into next/dt (diff)
downloadlinux-c0d6fe2f01c475cc137d90607a07578586883df8.tar.xz
linux-c0d6fe2f01c475cc137d90607a07578586883df8.zip
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
Diffstat (limited to 'arch/arm/boot/dts/omap5-uevm.dts')
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts618
1 files changed, 14 insertions, 604 deletions
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cb030f9d2c4..05b1c1ebded8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -7,9 +7,7 @@
*/
/dts-v1/;
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "omap5-board-common.dtsi"
/ {
model = "TI OMAP5 uEVM board";
@@ -19,523 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x7F000000>; /* 2032 MB */
};
-
- aliases {
- display0 = &hdmi0;
- };
-
- vmmcsd_fixed: fixedregulator-mmcsd {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- /* HS USB Host PHY on PORT 2 */
- hsusb2_phy: hsusb2_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- clocks = <&auxclk1_ck>;
- clock-names = "main_clk";
- clock-frequency = <19200000>;
- };
-
- /* HS USB Host PHY on PORT 3 */
- hsusb3_phy: hsusb3_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
- };
-
- leds {
- compatible = "gpio-leds";
- led@1 {
- label = "omap5:blue:usr1";
- gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- tpd12s015: encoder@0 {
- compatible = "ti,tpd12s015";
-
- pinctrl-names = "default";
- pinctrl-0 = <&tpd12s015_pins>;
-
- gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
- <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
- <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tpd12s015_in: endpoint@0 {
- remote-endpoint = <&hdmi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tpd12s015_out: endpoint@0 {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-
- hdmi0: connector@0 {
- compatible = "hdmi-connector";
- label = "hdmi";
-
- type = "b";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&tpd12s015_out>;
- };
- };
- };
-
- sound: sound {
- compatible = "ti,abe-twl6040";
- ti,model = "omap5-uevm";
-
- ti,mclk-freq = <19200000>;
-
- ti,mcpdm = <&mcpdm>;
-
- ti,twl6040 = <&twl6040>;
-
- /* Audio routing */
- ti,audio-routing =
- "Headset Stereophone", "HSOL",
- "Headset Stereophone", "HSOR",
- "Line Out", "AUXL",
- "Line Out", "AUXR",
- "HSMIC", "Headset Mic",
- "Headset Mic", "Headset Mic Bias",
- "AFML", "Line In",
- "AFMR", "Line In";
- };
-};
-
-&omap5_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &usbhost_pins
- &led_gpio_pins
- >;
-
- twl6040_pins: pinmux_twl6040_pins {
- pinctrl-single,pins = <
- 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
- >;
- };
-
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
- 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
- >;
- };
-
- mcbsp1_pins: pinmux_mcbsp1_pins {
- pinctrl-single,pins = <
- 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
- 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
- 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
- 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
- >;
- };
-
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
- 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
- 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
- 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
- >;
- };
-
- i2c5_pins: pinmux_i2c5_pins {
- pinctrl-single,pins = <
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
- 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
- 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
- >;
- };
-
- mcspi3_pins: pinmux_mcspi3_pins {
- pinctrl-single,pins = <
- 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
- 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
- 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
- >;
- };
-
- mcspi4_pins: pinmux_mcspi4_pins {
- pinctrl-single,pins = <
- 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */
- 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */
- 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */
- 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */
- >;
- };
-
- usbhost_pins: pinmux_usbhost_pins {
- pinctrl-single,pins = <
- 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
- 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
- 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
- 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
- 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
- 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
- >;
- };
-
- led_gpio_pins: pinmux_led_gpio_pins {
- pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
- 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
- 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
- >;
- };
-
- uart5_pins: pinmux_uart5_pins {
- pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
- 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
- 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
- 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
- >;
- };
-
- dss_hdmi_pins: pinmux_dss_hdmi_pins {
- pinctrl-single,pins = <
- 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
- 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
- >;
- };
-
- tpd12s015_pins: pinmux_tpd12s015_pins {
- pinctrl-single,pins = <
- 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
- >;
- };
-};
-
-&omap5_pmx_wkup {
- pinctrl-names = "default";
- pinctrl-0 = <
- &usbhost_wkup_pins
- >;
-
- usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
- pinctrl-single,pins = <
- 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
- >;
- };
-};
-
-&mmc1 {
- vmmc-supply = <&ldo9_reg>;
- bus-width = <4>;
-};
-
-&mmc2 {
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <8>;
- ti,non-removable;
-};
-
-&mmc3 {
- bus-width = <4>;
- ti,non-removable;
-};
-
-&mmc4 {
- status = "disabled";
};
-&mmc5 {
- status = "disabled";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <400000>;
-
- palmas: palmas@48 {
- compatible = "ti,palmas";
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- reg = <0x48>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,system-power-controller;
-
- extcon_usb3: palmas_usb {
- compatible = "ti,palmas-usb-vid";
- ti,enable-vbus-detection;
- ti,enable-id-detection;
- ti,wakeup;
- };
-
- clk32kgaudio: palmas_clk32k@1 {
- compatible = "ti,palmas-clk32kgaudio";
- #clock-cells = <0>;
- };
-
- palmas_pmic {
- compatible = "ti,palmas-pmic";
- interrupt-parent = <&palmas>;
- interrupts = <14 IRQ_TYPE_NONE>;
- interrupt-name = "short-irq";
-
- ti,ldo6-vibrator;
-
- regulators {
- smps123_reg: smps123 {
- /* VDD_OPP_MPU */
- regulator-name = "smps123";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps45_reg: smps45 {
- /* VDD_OPP_MM */
- regulator-name = "smps45";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1310000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps6_reg: smps6 {
- /* VDD_DDR3 - over VDD_SMPS6 */
- regulator-name = "smps6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps7_reg: smps7 {
- /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
- regulator-name = "smps7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps8_reg: smps8 {
- /* VDD_OPP_CORE */
- regulator-name = "smps8";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1310000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps9_reg: smps9 {
- /* VDDA_2v1_AUD over VDD_2v1 */
- regulator-name = "smps9";
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- ti,smps-range = <0x80>;
- };
-
- smps10_out2_reg: smps10_out2 {
- /* VBUS_5V_OTG */
- regulator-name = "smps10_out2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- smps10_out1_reg: smps10_out1 {
- /* VBUS_5V_OTG */
- regulator-name = "smps10_out1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- ldo1_reg: ldo1 {
- /* VDDAPHY_CAM: vdda_csiport */
- regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo2_reg: ldo2 {
- /* VCC_2V8_DISP: Does not go anywhere */
- regulator-name = "ldo2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- /* Unused */
- status = "disabled";
- };
-
- ldo3_reg: ldo3 {
- /* VDDAPHY_MDM: vdda_lli */
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- /* Only if Modem is used */
- status = "disabled";
- };
-
- ldo4_reg: ldo4 {
- /* VDDAPHY_DISP: vdda_dsiport/hdmi */
- regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: ldo5 {
- /* VDDA_1V8_PHY: usb/sata/hdmi.. */
- regulator-name = "ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo6_reg: ldo6 {
- /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
- regulator-name = "ldo6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo7_reg: ldo7 {
- /* VDD_VPP: vpp1 */
- regulator-name = "ldo7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- /* Only for efuse reprograming! */
- status = "disabled";
- };
-
- ldo8_reg: ldo8 {
- /* VDD_3v0: Does not go anywhere */
- regulator-name = "ldo8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- /* Unused */
- status = "disabled";
- };
-
- ldo9_reg: ldo9 {
- /* VCC_DV_SDIO: vdds_sdcard */
- regulator-name = "ldo9";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldoln_reg: ldoln {
- /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
- regulator-name = "ldoln";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldousb_reg: ldousb {
- /* VDDA_3V_USB: VDDA_USBHS33 */
- regulator-name = "ldousb";
- regulator-min-microvolt = <3250000>;
- regulator-max-microvolt = <3250000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- regen3_reg: regen3 {
- /* REGEN3 controls LDO9 supply to card */
- regulator-name = "regen3";
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-
- palmas_power_button: palmas_power_button {
- compatible = "ti,palmas-pwrbutton";
- interrupt-parent = <&palmas>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- wakeup-source;
- };
- };
-
- twl6040: twl@4b {
- compatible = "ti,twl6040";
- reg = <0x4b>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&twl6040_pins>;
-
- interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
-
- vio-supply = <&smps7_reg>;
- v2v1-supply = <&smps9_reg>;
- enable-active-high;
-
- clocks = <&clk32kgaudio>;
- clock-names = "clk32k";
- };
+&hdmi {
+ vdda-supply = <&ldo4_reg>;
};
&i2c5 {
@@ -552,92 +37,17 @@
};
};
-&mcpdm {
- pinctrl-names = "default";
- pinctrl-0 = <&mcpdm_pins>;
- status = "okay";
-};
-
-&mcbsp1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp1_pins>;
- status = "okay";
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
- status = "okay";
-};
-
-&usbhshost {
- port2-mode = "ehci-hsic";
- port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
- phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
- extcon = <&extcon_usb3>;
- vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <&omap5_pmx_core 0x19c>;
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
- cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
- status = "ok";
+&omap5_pmx_core {
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ >;
+ };
};
-&hdmi {
- status = "ok";
- vdda-supply = <&ldo4_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dss_hdmi_pins>;
-
- port {
- hdmi_out: endpoint {
- remote-endpoint = <&tpd12s015_in>;
- };
- };
+&tpd12s015 {
+ gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
+ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
+ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};