ARM: dts: qcom: msm8974-FP2: We're msm8974pro

Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the
include and filename to that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz

1 files changed, 0 insertions, 393 deletions

diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
deleted file mode 100644
index 2b9c5a87b014..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ /dev/null
@@ -1,393 +0,0 @@
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_CAMERA>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-	};
-
-	vibrator {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&pm8941_l18>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&imem {
-	reboot-mode {
-		mode-normal	= <0x77665501>;
-		mode-bootloader	= <0x77665500>;
-		mode-recovery	= <0x77665502>;
-	};
-};
-
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
-		pins = "gpio1", "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-};
-
-&pronto {
-	status = "okay";
-
-	vddmx-supply = <&pm8841_s1>;
-	vddcx-supply = <&pm8841_s2>;
-	vddpx-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wcnss_pin_a>;
-
-	iris {
-		vddxo-supply = <&pm8941_l6>;
-		vddrfa-supply = <&pm8941_l11>;
-		vddpa-supply = <&pm8941_l19>;
-		vdddig-supply = <&pm8941_s3>;
-	};
-
-	smd-edge {
-		qcom,remote-pid = <4>;
-		label = "pronto";
-
-		wcnss {
-			status = "okay";
-		};
-	};
-};
-
-&rpm_requests {
-	pm8841-regulators {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	pm8941-regulators {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&tlmm {
-	sdc1_on: sdc1-on {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on {
-		clk {
-			pins = "sdc2_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	wcnss_pin_a: wcnss-pin-active {
-		wlan {
-			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-			function = "wlan";
-
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-
-		bt {
-			pins = "gpio35", "gpio43", "gpio44";
-			function = "bt";
-
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		fm {
-			pins = "gpio41", "gpio42";
-			function = "fm";
-
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};