summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/qcom-pm8941.dtsi
diff options
context:
space:
mode:
authorStephen Boyd <stephen.boyd@linaro.org>2017-01-27 01:47:26 +0100
committerAndy Gross <andy.gross@linaro.org>2017-05-26 07:40:58 +0200
commit4ac5a200b06f1522f8bcc7df1e45ee17221d166a (patch)
tree699a9d414b6f817e326d083249a4fbfc858d2185 /arch/arm/boot/dts/qcom-pm8941.dtsi
parentARM: dts: qcom: add charger otg regulator (diff)
downloadlinux-4ac5a200b06f1522f8bcc7df1e45ee17221d166a.tar.xz
linux-4ac5a200b06f1522f8bcc7df1e45ee17221d166a.zip
ARM: dts: qcom-msm8974: Add HS usb node and OTG detection mechanisms
This USB controller has two phys, so add them both underneath the ULPI bus, but only enable one of them based on the board configuration. To get OTG to work, we need to add the id and vbus detection info and also populate the regulators for the vbus supply. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-pm8941.dtsi')
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi32
1 files changed, 31 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 6b16b296f0fa..3fc9f34f45bb 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -26,7 +26,14 @@
bias-pull-up;
};
- charger@1000 {
+ usb_id: misc@900 {
+ compatible = "qcom,pm8941-misc";
+ reg = <0x900>;
+ interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "usb_id";
+ };
+
+ smbb: charger@1000 {
compatible = "qcom,pm8941-charger";
reg = <0x1000>;
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
@@ -175,5 +182,28 @@
status = "disabled";
};
+
+ regulators {
+ compatible = "qcom,pm8941-regulators";
+ interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
+ interrupt-names = "ocp-5vs1", "ocp-5vs2";
+ vin_5vs-supply = <&pm8941_5v>;
+
+ pm8941_5v: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ pm8941_5vs1: 5vs1 {
+ regulator-enable-ramp-delay = <1000>;
+ regulator-pull-down;
+ regulator-over-current-protection;
+ qcom,ocp-max-retries = <10>;
+ qcom,ocp-retry-delay = <30>;
+ qcom,vs-soft-start-strength = <0>;
+ regulator-initial-mode = <1>;
+ };
+ };
};
};