ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 818 deletions

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
deleted file mode 100644
index 79b537b24642..000000000000
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ /dev/null
@@ -1,818 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Gose board
- *
- * Copyright (C) 2014-2015 Renesas Electronics Corporation
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- *      2: CN22
- *      3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- *	amixer set "LINEOUT Mixer DACL" on
- *	amixer set "DVC Out" 100%
- *	amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *	amixer set "DVC Out Mute" on
- *	amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *	amixer set "DVC Out Ramp" on
- *	aplay xxx.wav &
- *	amixer set "DVC Out"  80%  // Volume Down
- *	amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7793.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Gose";
-	compatible = "renesas,gose", "renesas,r8a7793";
-
-	aliases {
-		serial0 = &scif0;
-		serial1 = &scif1;
-		i2c9 = &gpioi2c2;
-		i2c10 = &gpioi2c4;
-		i2c11 = &i2chdmi;
-		i2c12 = &i2cexio4;
-		mmc0 = &sdhi0;
-		mmc1 = &sdhi1;
-		mmc2 = &sdhi2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW30";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW31";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW32";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW33";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_E>;
-			label = "SW34";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F>;
-			label = "SW35";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_G>;
-			label = "SW36";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			label = "LED7";
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			label = "LED8";
-		};
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi2: regulator-vcc-sdhi2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator-vccq-sdhi2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&adv7612_in>;
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	composite-in {
-		compatible = "composite-video-connector";
-
-		port {
-			composite_con_in: endpoint {
-				remote-endpoint = <&adv7180_in>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x13_clk: x13-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	gpioi2c2: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	gpioi2c4: i2c-10 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C2.
-	 */
-	i2chdmi: i2c-11 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c2>, <&gpioi2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180cp";
-			reg = <0x20>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7180_in: endpoint {
-						remote-endpoint = <&composite_con_in>;
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					adv7180_out: endpoint {
-						bus-width = <8>;
-						remote-endpoint = <&vin1ep>;
-					};
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con_out>;
-					};
-				};
-			};
-		};
-
-		hdmi-in@4c {
-			compatible = "adi,adv7612";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-			default-input = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7612_in: endpoint {
-						remote-endpoint = <&hdmi_con_in>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					adv7612_out: endpoint {
-						remote-endpoint = <&vin0ep2>;
-					};
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
-	/*
-	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
-	 * A fallback to GPIO is provided.
-	 */
-	i2cexio4: i2c-12 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c4>, <&gpioi2c4>;
-		i2c-bus-name = "i2c-exio4";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-	};
-};
-
-&lvds0 {
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	i2c4_pins: i2c4 {
-		groups = "i2c4_c";
-		function = "i2c4";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_d";
-		function = "scif1";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq0";
-		function = "intc";
-	};
-
-	pmic_irq_pins: pmicirq {
-		groups = "intc_irq2";
-		function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <3300>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data4", "sdhi2_ctrl";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	sound_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a";
-		function = "audio_clk";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
-		bias-pull-up;
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
-		function = "vin0";
-	};
-
-	vin1_pins: vin1 {
-		groups = "vin1_data8", "vin1_clk";
-		function = "vin1";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cmt0 {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_irq_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-
-	vdd_dvfs: regulator@68 {
-		compatible = "dlg,da9210";
-		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&i2c4 {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "i2c-exio4";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>, <&src2>, <&dvc0>;
-			capture  = <&ssi1>, <&src3>, <&dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-/* HDMI video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep2: endpoint {
-			remote-endpoint = <&adv7612_out>;
-			bus-width = <24>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			pclk-sample = <1>;
-			data-active = <1>;
-		};
-	};
-};
-
-/* composite video input */
-&vin1 {
-	pinctrl-0 = <&vin1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	port {
-		vin1ep: endpoint {
-			remote-endpoint = <&adv7180_out>;
-			bus-width = <8>;
-		};
-	};
-};