ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 462 deletions

diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
deleted file mode 100644
index 3eee42137b6d..000000000000
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ /dev/null
@@ -1,462 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "rk3066a.dtsi"
-
-/ {
-	model = "Rayeager PX2";
-	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
-
-	aliases {
-		mmc0 = &mmc0;
-		mmc1 = &mmc1;
-		mmc2 = &emmc;
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_int>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			wakeup-source;
-			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <KEY_POWER>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_key>;
-		};
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm3 0 1000>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-		voltage-table = <1000000 100>,
-				<1200000 42>;
-		status = "okay";
-	};
-
-	vsys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
-	vcc_stdby: stdby-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "5v_stdby";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_emmc: emmc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "emmc_vccq";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		vin-supply = <&vsys>;
-	};
-
-	vcc_sata: sata-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sata_pwr>;
-		regulator-name = "usb_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_stdby>;
-	};
-
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vcc_host: usb-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_drv>;
-		regulator-name = "host-pwr";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_stdby>;
-	};
-
-	vcc_otg: usb-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&otg_drv>;
-		regulator-name = "vcc_otg";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_stdby>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&emac {
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&emmc {
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
-	vmmc-supply = <&vcc_emmc>;
-	vqmmc-supply = <&vcc_emmc>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	ak8963: ak8963@d {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0d>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&comp_int>;
-	};
-
-	mma8452: mma8452@1d {
-		compatible = "fsl,mma8452";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gsensor_int>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: tps@2d {
-		reg = <0x2d>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&pwr_hold>;
-
-		vcc1-supply = <&vsys>;
-		vcc2-supply = <&vsys>;
-		vcc3-supply = <&vsys>;
-		vcc4-supply = <&vsys>;
-		vcc5-supply = <&vcc_io>;
-		vcc6-supply = <&vcc_io>;
-		vcc7-supply = <&vsys>;
-		vccio-supply = <&vsys>;
-
-		regulators {
-			vcc_rtc: regulator@0 {
-				regulator-name = "vcc_rtc";
-				regulator-always-on;
-			};
-
-			vcc_io: regulator@1 {
-				regulator-name = "vcc_io";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_arm: regulator@2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcc_ddr: regulator@3 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcc18: regulator@5 {
-				regulator-name = "vcc18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdd_11: regulator@6 {
-				regulator-name = "vdd_11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vcc_25: regulator@7 {
-				regulator-name = "vcc_25";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vccio_wl: regulator@8 {
-				regulator-name = "vccio_wl";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcc25_hdmi: regulator@9 {
-				regulator-name = "vcc25_hdmi";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-			};
-
-			vcca_33: regulator@10 {
-				regulator-name = "vcca_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcc_rmii: regulator@11 {
-				regulator-name = "vcc_rmii";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcc28_cif: regulator@12 {
-				regulator-name = "vcc28_cif";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&mmc0 {
-	bus-width = <4>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	vmmc-supply = <&vcc_sd>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	status = "okay";
-};
-
-&mmc1 {
-	bus-width = <4>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmc-supply = <&vccio_wl>;
-	status = "okay";
-};
-
-&pinctrl {
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	ak8963 {
-		comp_int: comp-int {
-			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	emac {
-		rmii_rst: rmii-rst {
-			rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	keys {
-		pwr_key: pwr-key {
-			rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	mma8452 {
-		gsensor_int: gsensor-int {
-			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	mmc {
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	usb_host {
-		host_drv: host-drv {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-
-		hub_rst: hub-rst {
-			rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-
-		sata_pwr: sata-pwr {
-			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-
-		sata_reset: sata-reset {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	usb_otg {
-		otg_drv: otg-drv {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-	};
-
-	tps {
-		pmic_int: pmic-int {
-			rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
-		};
-
-		pwr_hold: pwr-hold {
-			rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc_25>;
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
-	status = "okay";
-};
-
-&usb_host {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hub_rst>, <&sata_reset>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_otg {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};