ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 304 deletions

diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
deleted file mode 100644
index 7bfbfd11fb55..000000000000
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "rk3229.dtsi"
-
-/ {
-	model = "Mecer Xtreme Mini S6";
-	compatible = "mecer,xms6", "rockchip,rk3229";
-
-	aliases {
-		mmc0 = &sdmmc;
-		mmc1 = &sdio;
-		mmc2 = &emmc;
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	dc_12v: dc-12v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	ext_gmac: ext_gmac {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-		#clock-cells = <0>;
-	};
-
-	power-led {
-		compatible = "gpio-leds";
-
-		blue_led: led-0 {
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
-		              <&gpio2 29 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_host: vcc-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_phy: vcc-phy-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		regulator-name = "vcc_phy";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vccio_1v8>;
-	};
-
-	vcc_sys: vcc-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vccio_1v8: vccio-1v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vccio_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vccio_3v3: vccio-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vccio_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vdd_arm: vdd-arm-regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 25000 1>;
-		pwm-supply = <&vcc_sys>;
-		regulator-name = "vdd_arm";
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_log: vdd-log-regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc_sys>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&emmc {
-	cap-mmc-highspeed;
-	non-removable;
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC_SRC>;
-	assigned-clock-rates = <50000000>;
-	clock_in_out = "output";
-	phy-handle = <&phy>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc_phy>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@0 {
-			compatible = "ethernet-phy-id1234.d400",
-			             "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			clocks = <&cru SCLK_MAC_PHY>;
-			phy-is-integrated;
-			resets = <&cru SRST_MACPHY>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&vdd_log>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_phy {
-	status = "okay";
-};
-
-&iep_mmu {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	vccio1-supply = <&vccio_3v3>;
-	vccio2-supply = <&vccio_1v8>;
-	vccio4-supply = <&vccio_3v3>;
-};
-
-&pinctrl {
-	usb {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&sdio {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	vqmmc-supply = <&vccio_1v8>;
-	status = "okay";
-};
-
-&sdmmc {
-	cap-mmc-highspeed;
-	disable-wp;
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <0>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc_host>;
-		status = "okay";
-	};
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vcc_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc_host>;
-		status = "okay";
-	};
-
-	u2phy1_otg: otg-port {
-		phy-supply = <&vcc_host>;
-		status = "okay";
-	};
-};
-
-&uart2 {
-	pinctrl-0 = <&uart21_xfer>;
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usb_host2_ehci {
-	status = "okay";
-};
-
-&usb_host2_ohci {
-	status = "okay";
-};
-
-&usb_otg {
-	status = "okay";
-};
-
-&vop {
-	status = "okay";
-};
-
-&vop_mmu {
-	status = "okay";
-};