ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 916 deletions

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
deleted file mode 100644
index f628d3660493..000000000000
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ /dev/null
@@ -1,916 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S5PV210 based Galaxy Aries board device tree source
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "s5pv210.dtsi"
-
-/ {
-	compatible = "samsung,aries", "samsung,s5pv210";
-
-	aliases: aliases {
-		i2c4 = &i2c_sound;
-		i2c5 = &i2c_accel;
-		i2c6 = &i2c_pmic;
-		i2c7 = &i2c_musb;
-		i2c9 = &i2c_fuel;
-		i2c10 = &i2c_touchkey;
-		i2c11 = &i2c_prox;
-		i2c12 = &i2c_magnetometer;
-	};
-
-	memory@30000000 {
-		device_type = "memory";
-		reg = <0x30000000 0x05000000>,
-			<0x40000000 0x10000000>,
-			<0x50000000 0x08000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mfc_left: region@43000000 {
-			compatible = "shared-dma-pool";
-			no-map;
-			reg = <0x43000000 0x2000000>;
-		};
-
-		mfc_right: region@51000000 {
-			compatible = "shared-dma-pool";
-			no-map;
-			reg = <0x51000000 0x2000000>;
-		};
-	};
-
-	pmic_ap_clk: clock-0 {
-		/* Workaround for missing clock on PMIC */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	bt_codec: bt-sco {
-		compatible = "linux,bt-sco";
-		#sound-dai-cells = <0>;
-	};
-
-	vibrator_pwr: regulator-fixed-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vibrator-en";
-		enable-active-high;
-		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_ena>;
-	};
-
-	touchkey_vdd: regulator-fixed-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VTOUCH_3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchkey_vdd_ena>;
-	};
-
-	gp2a_vled: regulator-fixed-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "VLED";
-		enable-active-high;
-		gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gp2a_power>;
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_gpio_rst>;
-		post-power-on-delay-ms = <500>;
-		power-off-delay-us = <500>;
-	};
-
-	i2c_sound: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sound_i2c_pins>;
-
-		wm8994: audio-codec@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-
-			#sound-dai-cells = <0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			clocks = <&clocks MOUT_CLKOUT>;
-			clock-names = "MCLK1";
-
-			AVDD2-supply = <&buck3_reg>;
-			DBVDD-supply = <&buck3_reg>;
-			CPVDD-supply = <&buck3_reg>;
-			SPKVDD1-supply = <&buck3_reg>;
-			SPKVDD2-supply = <&buck3_reg>;
-
-			wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
-					0xa101 0x0100 0x8100 0x0100 0x0100
-					0x0100>;
-
-			wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-			wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-
-			wlf,lineout1-se;
-			wlf,lineout2-se;
-
-			assigned-clocks = <&clocks MOUT_CLKOUT>;
-			assigned-clock-rates = <0>;
-			assigned-clock-parents = <&xusbxti>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&codec_ldo>;
-		};
-	};
-
-	i2c_accel: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&accel_i2c_pins>;
-
-		accelerometer@38 {
-			compatible = "bosch,bma023";
-			reg = <0x38>;
-
-			vdd-supply = <&ldo9_reg>;
-			vddio-supply = <&ldo9_reg>;
-		};
-	};
-
-	i2c_pmic: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_i2c_pins>;
-
-		pmic@66 {
-			compatible = "maxim,max8998";
-			reg = <0x66>;
-			interrupt-parent = <&gph0>;
-			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-
-			max8998,pmic-buck1-default-dvs-idx = <1>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
-							<&gph0 4 GPIO_ACTIVE_HIGH>;
-			max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
-							<1050000>, <950000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
-			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <1600000>;
-					regulator-max-microvolt = <3600000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V_PDA";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "CAM_SENSOR_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VGA_VDDIO_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VGA_DVDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_ISP_HOST_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VGA_AVDD_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vddarm";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-suspend-microvolt = <1250000>;
-					};
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vddint";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-suspend-microvolt = <1100000>;
-					};
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "CAM_ISP_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-					regulator-always-on;
-				};
-
-				safe1_sreg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-				};
-
-				safe2_sreg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-				};
-			};
-		};
-	};
-
-	i2c_musb: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&musb_i2c_pins>;
-
-		fsa9480: musb@25 {
-			compatible = "fcs,fsa9480";
-			reg = <0x25>;
-			interrupt-parent = <&gph2>;
-			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&musb_irq>;
-		};
-	};
-
-	i2c_fuel: i2c-gpio-4 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fg_i2c_pins>;
-
-		fg: fuelgauge@36 {
-			compatible = "maxim,max17040";
-			reg = <0x36>;
-		};
-	};
-
-	i2c_touchkey: i2c-gpio-5 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchkey_i2c_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,aries-touchkey";
-			reg = <0x20>;
-			vdd-supply = <&touchkey_vdd>;
-			vcc-supply = <&buck3_reg>;
-			linux,keycodes = <KEY_MENU KEY_BACK
-					  KEY_HOMEPAGE KEY_SEARCH>;
-			interrupt-parent = <&gpj4>;
-			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_irq>;
-		};
-	};
-
-	i2c_prox: i2c-gpio-6 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_i2c_pins>;
-
-		light-sensor@44 {
-			compatible = "sharp,gp2ap002a00f";
-			reg = <0x44>;
-			interrupt-parent = <&gph0>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-			vdd-supply = <&gp2a_vled>;
-			vio-supply = <&gp2a_vled>;
-			io-channels = <&gp2a_shunt>;
-			io-channel-names = "alsout";
-			sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
-			sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gp2a_irq>;
-		};
-	};
-
-	i2c_magnetometer: i2c-gpio-7 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&magnetometer_i2c_pins>;
-
-		status = "disabled";
-
-		/* Yamaha yas529 magnetometer, no mainline binding */
-	};
-
-	vibrator: pwm-vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm 1 44642 0>;
-		pwm-names = "enable";
-		vcc-supply = <&vibrator_pwr>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm1_out>;
-	};
-
-	poweroff: syscon-poweroff {
-		compatible = "syscon-poweroff";
-		regmap = <&pmu_syscon>;
-		offset = <0x681c>; /* PS_HOLD_CONTROL */
-		value = <0x5200>;
-	};
-
-	spi_lcd: spi-2 {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_spi_pins>;
-
-		panel@0 {
-			compatible = "samsung,s6e63m0";
-			reg = <0>;
-			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			spi-max-frequency = <1200000>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&panel_rst>;
-
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_ep>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo4_reg>;
-
-	status = "okay";
-
-	gp2a_shunt: current-sense-shunt {
-		compatible = "current-sense-shunt";
-		io-channels = <&adc 9>;
-		shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
-		#io-channel-cells = <0>;
-	};
-};
-
-&fimd {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	status = "okay";
-
-	samsung,invert-vden;
-	samsung,invert-vclk;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@3 {
-		reg = <3>;
-		fimd_ep: endpoint {
-			remote-endpoint = <&lcd_ep>;
-		};
-	};
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo8_reg>;
-	vusb_d-supply = <&ldo3_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
-	samsung,i2c-slave-addr = <0x10>;
-	status = "okay";
-
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpj0>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_irq>;
-		reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2s0 {
-	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
-	status = "okay";
-};
-
-&mfc {
-	memory-region = <&mfc_left>, <&mfc_right>;
-};
-
-&pinctrl0 {
-	bt_reset: bt-reset-pins {
-		samsung,pins = "gpb-3";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	wlan_bt_en: wlan-bt-en-pins {
-		samsung,pins = "gpb-5";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-val = <1>;
-	};
-
-	codec_ldo: codec-ldo-pins {
-		samsung,pins = "gpf3-4";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-	};
-
-	prox_i2c_pins: gp2a-i2c-pins {
-		samsung,pins = "gpg0-2", "gpg2-2";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	wlan_gpio_rst: wlan-gpio-rst-pins {
-		samsung,pins = "gpg1-2";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-	};
-
-	bt_wake: bt-wake-pins {
-		samsung,pins = "gpg3-4";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-	};
-
-	gp2a_irq: gp2a-irq-pins {
-		samsung,pins = "gph0-2";
-		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_pins: pmic-dvs-pins {
-		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-		samsung,pin-val = <0>;
-	};
-
-	pmic_irq: pmic-irq-pins {
-		samsung,pins = "gph0-7";
-		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	wifi_host_wake: wifi-host-wake-pins {
-		samsung,pins = "gph2-4";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	bt_host_wake: bt-host-wake-pins {
-		samsung,pins = "gph2-5";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	musb_irq: musq-irq-pins {
-		samsung,pins = "gph2-7";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	tf_detect: tf-detect-pins {
-		samsung,pins = "gph3-4";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	wifi_wake: wifi-wake-pins {
-		samsung,pins = "gph3-5";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-	};
-
-	magnetometer_i2c_pins: yas529-i2c-pins {
-		samsung,pins = "gpj0-0", "gpj0-1";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	ts_irq: ts-irq-pins {
-		samsung,pins = "gpj0-5";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	vibrator_ena: vibrator-ena-pins {
-		samsung,pins = "gpj1-1";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	gp2a_power: gp2a-power-pins {
-		samsung,pins = "gpj1-4";
-		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	touchkey_i2c_pins: touchkey-i2c-pins {
-		samsung,pins = "gpj3-0", "gpj3-1";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	touchkey_vdd_ena: touchkey-vdd-ena-pins {
-		samsung,pins = "gpj3-2";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	musb_i2c_pins: musb-i2c-pins {
-		samsung,pins = "gpj3-4", "gpj3-5";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	accel_i2c_pins: accel-i2c-pins {
-		samsung,pins = "gpj3-6", "gpj3-7";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	pmic_i2c_pins: pmic-i2c-pins {
-		samsung,pins = "gpj4-0", "gpj4-3";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	touchkey_irq: touchkey-irq-pins {
-		samsung,pins = "gpj4-1";
-		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	lcd_spi_pins: spi-lcd-pins {
-		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	fg_i2c_pins: fg-i2c-pins {
-		samsung,pins = "mp05-0", "mp05-1";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	sound_i2c_pins: sound-i2c-pins {
-		samsung,pins = "mp05-2", "mp05-3";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-
-	panel_rst: panel-rst-pins {
-		samsung,pins = "mp05-5";
-		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
-		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
-	};
-};
-
-&pwm {
-	samsung,pwm-outputs = <1>;
-};
-
-&rtc {
-	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	max-frequency = <38400000>;
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
-	pinctrl-names = "default";
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-	keep-power-in-suspend;
-
-	mmc-pwrseq = <&wifi_pwrseq>;
-	non-removable;
-	status = "okay";
-
-	assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
-	assigned-clock-rates = <0>, <50000000>;
-	assigned-clock-parents = <&clocks MOUT_MPLL>;
-
-	wlan@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gph2>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&ldo5_reg>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
-	assigned-clock-rates = <0>, <50000000>;
-	assigned-clock-parents = <&clocks MOUT_MPLL>;
-};
-
-&uart0 {
-	assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
-	assigned-clock-rates = <0>, <111166667>;
-	assigned-clock-parents = <&clocks MOUT_MPLL>;
-
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4329-bt";
-		max-speed = <3000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
-			     &bt_reset &bt_wake>;
-		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&gph2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-	vbus-supply = <&safe1_sreg>;
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};