ARM: dts: at91: Switch to the new NAND bindings

Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.

Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

1 files changed, 47 insertions, 30 deletions

diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
index dc7572bc7ff0..75cbf4d4ab1a 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
@@ -148,43 +148,60 @@
 			};
 		};
 
-		nand0: nand@60000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
 
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
 
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
 
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
-			};
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
 
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
 			};
 		};
 	};