ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 264 deletions

diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
deleted file mode 100644
index 5d9e97fecf83..000000000000
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
- *
- *  Copyright (C) 2016 Atmel,
- */
-#include "sama5d3xcm_cmp.dtsi"
-
-/ {
-	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
-
-	ahb {
-		apb {
-			mmc0: mmc@f0000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			spi0: spi@f0004000 {
-				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
-
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			ssc0: ssc@f0008000 {
-				atmel,clk-from-rk-pin;
-			};
-
-			/*
-			 * i2c0 conflicts with ISI:
-			 * disable it to allow the use of ISI
-			 * can not enable audio when i2c0 disabled
-			 */
-			i2c0: i2c@f0014000 {
-				wm8904: wm8904@1a {
-					compatible = "wlf,wm8904";
-					reg = <0x1a>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-					clock-names = "mclk";
-				};
-			};
-
-			i2c1: i2c@f0018000 {
-				ov2640: camera@30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
-					/* use pck1 for the master clock of ov2640 */
-					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
-					assigned-clock-rates = <25000000>;
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
-			};
-
-			usart1: serial@f0020000 {
-				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-				status = "okay";
-			};
-
-			isi: isi@f0034000 {
-				port {
-					isi_0: endpoint {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-
-			mmc1: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			adc0: adc@f8018000 {
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <
-					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				pinctrl-1 = <
-					&pinctrl_adc0_adtrg_sleep
-					&pinctrl_adc0_ad0_sleep
-					&pinctrl_adc0_ad1_sleep
-					&pinctrl_adc0_ad2_sleep
-					&pinctrl_adc0_ad3_sleep
-					&pinctrl_adc0_ad4_sleep
-					>;
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy0: ethernet-phy@1 {
-					/*interrupt-parent = <&pioE>;*/
-					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
-					reg = <1>;
-				};
-			};
-
-			pinctrl@fffff200 {
-				adc0 {
-					pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
-						atmel,pins =
-							<AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-					pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
-						atmel,pins =
-							<AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-					pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
-						atmel,pins =
-							<AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-					pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
-						atmel,pins =
-							<AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-					pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
-						atmel,pins =
-							<AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-					pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
-						atmel,pins =
-							<AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
-					};
-				};
-
-				board {
-					pinctrl_gpio_keys: gpio_keys {
-						atmel,pins =
-							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
-						atmel,pins =
-							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
-						atmel,pins =
-							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_reset: sensor_reset-0 {
-						atmel,pins =
-							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_power: sensor_power-0 {
-						atmel,pins =
-							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb0: gadget@500000 {
-			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
-
-		atmel,model = "wm8904 @ SAMA5D3EK";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN2L", "Line In Jack",
-			"IN2R", "Line In Jack",
-			"Mic", "MICBIAS",
-			"IN1L", "Mic";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-
-		status = "disabled";
-	};
-
-	/* Conflict with LCD pins */
-	gpio_keys {
-		compatible = "gpio-keys";
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		pb_user1 {
-			label = "pb_user1";
-			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};