Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

1 files changed, 615 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 000000000000..402844cb3152
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@09200000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@09201000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@09202000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@09203000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@09204000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@09205000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@09206000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@09207000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@09208000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@09209000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-default {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-default {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR>;
+						mrst = <&pio12 7 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+			};
+		};
+	};
+};