Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 124 insertions, 35 deletions

diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 3490ef9ec603..f01c315bdc4b 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -16,6 +16,11 @@
 / {
 	interrupt-parent = <&intc>;
 
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -47,44 +52,48 @@
 			clock-frequency = <0>;
 		};
 
-		osc24M: osc24M@01c20050 {
+		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k {
+		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		pll4: pll4@01c20018 {
+		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll4";
 		};
 
-		pll5: pll5@01c20020 {
+		pll5: clk@01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
 		};
 
-		pll6: pll6@01c20028 {
+		pll6: clk@01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -93,21 +102,23 @@
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
-		axi_gates: axi_gates@01c2005c {
+		axi_gates: clk@01c2005c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-axi-gates-clk";
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
 			clock-output-names = "axi_dram";
@@ -115,12 +126,13 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
+			clock-output-names = "ahb";
 		};
 
-		ahb_gates: ahb_gates@01c20060 {
+		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
@@ -135,12 +147,13 @@
 
 		apb0: apb0@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
+			clock-output-names = "apb0";
 		};
 
-		apb0_gates: apb0_gates@01c20068 {
+		apb0_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
@@ -150,19 +163,21 @@
 
 		apb1_mux: apb1_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
 		};
 
 		apb1: apb1@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c2006c {
+		apb1_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
@@ -173,7 +188,7 @@
 
 		nand_clk: clk@01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -181,7 +196,7 @@
 
 		ms_clk: clk@01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -189,7 +204,7 @@
 
 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -197,7 +212,7 @@
 
 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -205,7 +220,7 @@
 
 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -213,7 +228,7 @@
 
 		ts_clk: clk@01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -221,7 +236,7 @@
 
 		ss_clk: clk@01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -229,7 +244,7 @@
 
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -237,7 +252,7 @@
 
 		spi1_clk: clk@01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -245,7 +260,7 @@
 
 		spi2_clk: clk@01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -253,15 +268,24 @@
 
 		ir0_clk: clk@01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2015c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mbus";
@@ -274,6 +298,71 @@
 		#size-cells = <1>;
 		ranges;
 
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>;
+			reset-names = "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@01c20400 {
 			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
@@ -336,7 +425,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};