ARM: dts: sun7i: Change pinctrl nodes to avoid warning

All our pinctrl nodes were using a node name convention with a unit-address
to differentiate the different muxing options. However, since those nodes
didn't have a reg property, they were generating warnings in DTC.

In order to accomodate for this, convert the old nodes to the syntax we've
been using for the new SoCs, including removing the letter suffix of the
node labels to the bank of those pins to make things more readable.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

1 files changed, 13 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index f78f18fd7c1c..4cef69e90b2f 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -117,7 +117,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
 	phy = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
@@ -139,7 +139,7 @@
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -151,7 +151,7 @@
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -163,7 +163,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };
 
@@ -223,7 +223,7 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -232,7 +232,7 @@
 
 &mmc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
+	pinctrl-0 = <&mmc3_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@@ -325,33 +325,33 @@
 
 &spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>,
-		    <&spi1_cs0_pins_a>;
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>,
-		    <&spi2_cs0_pins_a>;
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart6 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart6_pins_a>;
+	pinctrl-0 = <&uart6_pi_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };