Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The usual collection of new drivers, non-critical fixes, and updates
  to existing clk drivers. The bulk of the work is on Allwinner and
  Rockchip SoCs, but there's also an Intel Atom driver in here too.

  New Drivers:
   - Tegra BPMP firmware
   - Hisilicon hi3660 SoCs
   - Rockchip rk3328 SoCs
   - Intel Atom PMC
   - STM32F746
   - IDT VersaClock 5P49V5923 and 5P49V5933
   - Marvell mv98dx3236 SoCs
   - Allwinner V3s SoCs

  Removed Drivers:
   - Samsung Exynos4415 SoCs

  Updates:
   - Migrate ABx500 to OF
   - Qualcomm IPQ4019 CPU clks and general PLL support
   - Qualcomm MSM8974 RPM
   - Rockchip non-critical fixes and clk id additions
   - Samsung Exynos4412 CPUs
   - Socionext UniPhier NAND and eMMC support
   - ZTE zx296718 i2s and other audio clks
   - Renesas CAN and MSIOF clks for R-Car M3-W
   - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
   - TI CDCE913, CDCE937, and CDCE949 clk generators
   - Marvell Armada ap806 CPU frequencies
   - STM32F4* I2S/SAI support
   - Broadcom BCM2835 DSI support
   - Allwinner sun5i and A80 conversion to new style clk bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
  clk: renesas: mstp: ensure register writes complete
  clk: qcom: Do not drop device node twice
  clk: mvebu: adjust clock handling for the CP110 system controller
  clk: mvebu: Expand mv98dx3236-core-clock support
  clk: zte: add i2s clocks for zx296718
  clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
  clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
  clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
  clk: tegra: Add BPMP clock driver
  clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
  clk: uniphier: add NAND clock for all UniPhier SoCs
  ARM: dts: sun9i: Switch to new clock bindings
  clk: sunxi-ng: Add A80 Display Engine CCU
  clk: sunxi-ng: Add A80 USB CCU
  clk: sunxi-ng: Add A80 CCU
  clk: sunxi-ng: Support separately grouped PLL lock status register
  clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
  clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
  clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
  clk: qcom: SDHCI enablement on Nexus 5X / 6P
  ...

1 files changed, 107 insertions, 297 deletions

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 03f2ab47ece0..15b6d122f878 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -48,6 +48,13 @@
 
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
 / {
 	interrupt-parent = <&gic>;
 
@@ -159,228 +166,13 @@
 			clock-output-names = "osc32k";
 		};
 
-		usb_mod_clk: clk@00a08000 {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun9i-a80-usb-mod-clk";
-			reg = <0x00a08000 0x4>;
-			clocks = <&ahb1_gates 1>;
-			clock-output-names = "usb0_ahb", "usb_ohci0",
-					     "usb1_ahb", "usb_ohci1",
-					     "usb2_ahb", "usb_ohci2";
-		};
-
-		usb_phy_clk: clk@00a08004 {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun9i-a80-usb-phy-clk";
-			reg = <0x00a08004 0x4>;
-			clocks = <&ahb1_gates 1>;
-			clock-output-names = "usb_phy0", "usb_hsic1_480M",
-					     "usb_phy1", "usb_hsic2_480M",
-					     "usb_phy2", "usb_hsic_12M";
-		};
-
-		pll3: clk@06000008 {
-			/* placeholder until implemented */
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-rate = <0>;
-			clock-output-names = "pll3";
-		};
-
-		pll4: clk@0600000c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-pll4-clk";
-			reg = <0x0600000c 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll12: clk@0600002c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-pll4-clk";
-			reg = <0x0600002c 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll12";
-		};
-
-		gt_clk: clk@0600005c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-gt-clk";
-			reg = <0x0600005c 0x4>;
-			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
-			clock-output-names = "gt";
-		};
-
-		ahb0: clk@06000060 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-ahb-clk";
-			reg = <0x06000060 0x4>;
-			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
-			clock-output-names = "ahb0";
-		};
-
-		ahb1: clk@06000064 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-ahb-clk";
-			reg = <0x06000064 0x4>;
-			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
-			clock-output-names = "ahb1";
-		};
-
-		ahb2: clk@06000068 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-ahb-clk";
-			reg = <0x06000068 0x4>;
-			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
-			clock-output-names = "ahb2";
-		};
-
-		apb0: clk@06000070 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-apb0-clk";
-			reg = <0x06000070 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "apb0";
-		};
-
-		apb1: clk@06000074 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-apb1-clk";
-			reg = <0x06000074 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "apb1";
-		};
-
-		cci400_clk: clk@06000078 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun9i-a80-gt-clk";
-			reg = <0x06000078 0x4>;
-			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
-			clock-output-names = "cci400";
-		};
-
-		mmc0_clk: clk@06000410 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-mmc-clk";
-			reg = <0x06000410 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "mmc0", "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@06000414 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-mmc-clk";
-			reg = <0x06000414 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "mmc1", "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@06000418 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-mmc-clk";
-			reg = <0x06000418 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "mmc2", "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@0600041c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-mmc-clk";
-			reg = <0x0600041c 0x4>;
-			clocks = <&osc24M>, <&pll4>;
-			clock-output-names = "mmc3", "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ahb0_gates: clk@06000580 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
-			reg = <0x06000580 0x4>;
-			clocks = <&ahb0>;
-			clock-indices = <0>, <1>, <3>,
-					<5>, <8>, <12>,
-					<13>, <14>,
-					<15>, <16>, <18>,
-					<20>, <21>, <22>,
-					<23>;
-			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
-					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
-					"ahb0_nand0", "ahb0_sdram",
-					"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
-					"ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
-					"ahb0_spi3";
-		};
-
-		ahb1_gates: clk@06000584 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
-			reg = <0x06000584 0x4>;
-			clocks = <&ahb1>;
-			clock-indices = <0>, <1>,
-					<17>, <21>,
-					<22>, <23>,
-					<24>;
-			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
-					"ahb1_gmac", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_hstimer",
-					"ahb1_dma";
-		};
-
-		ahb2_gates: clk@06000588 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
-			reg = <0x06000588 0x4>;
-			clocks = <&ahb2>;
-			clock-indices = <0>, <1>,
-					<2>, <4>, <5>,
-					<7>, <8>, <11>;
-			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
-					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
-					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
-		};
-
-		apb0_gates: clk@06000590 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
-			reg = <0x06000590 0x4>;
-			clocks = <&apb0>;
-			clock-indices = <1>, <5>,
-					<11>, <12>, <13>,
-					<15>, <17>, <18>,
-					<19>;
-			clock-output-names = "apb0_spdif", "apb0_pio",
-					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
-					"apb0_lradc", "apb0_gpadc", "apb0_twd",
-					"apb0_cirtx";
-		};
-
-		apb1_gates: clk@06000594 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
-			reg = <0x06000594 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <4>,
-					<16>, <17>,
-					<18>, <19>,
-					<20>, <21>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
-					"apb1_uart0", "apb1_uart1",
-					"apb1_uart2", "apb1_uart3",
-					"apb1_uart4", "apb1_uart5";
-		};
-
 		cpus_clk: clk@08001410 {
 			compatible = "allwinner,sun9i-a80-cpus-clk";
 			reg = <0x08001410 0x4>;
 			#clock-cells = <0>;
-			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
 			clock-output-names = "cpus";
 		};
 
@@ -453,8 +245,8 @@
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a00000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_mod_clk 1>;
-			resets = <&usb_mod_clk 17>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -464,8 +256,9 @@
 			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 			reg = <0x00a00400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
-			resets = <&usb_mod_clk 17>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -474,9 +267,9 @@
 		usbphy1: phy@00a00800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a00800 0x4>;
-			clocks = <&usb_phy_clk 1>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
 			clock-names = "phy";
-			resets = <&usb_phy_clk 17>;
+			resets = <&usb_clocks RST_USB0_PHY>;
 			reset-names = "phy";
 			status = "disabled";
 			#phy-cells = <0>;
@@ -486,8 +279,8 @@
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a01000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_mod_clk 3>;
-			resets = <&usb_mod_clk 18>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
 			phys = <&usbphy2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -496,11 +289,16 @@
 		usbphy2: phy@00a01800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a01800 0x4>;
-			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
-				 <&usb_phy_clk 3>;
-			clock-names = "hsic_480M", "hsic_12M", "phy";
-			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
-			reset-names = "hsic", "phy";
+			clocks = <&usb_clocks CLK_USB1_HSIC>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_PHY>;
+			clock-names = "hsic_480M",
+				      "hsic_12M",
+				      "phy";
+			resets = <&usb_clocks RST_USB1_HSIC>,
+				 <&usb_clocks RST_USB1_PHY>;
+			reset-names = "hsic",
+				      "phy";
 			status = "disabled";
 			#phy-cells = <0>;
 			/* usb1 is always used with HSIC */
@@ -511,8 +309,8 @@
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a02000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_mod_clk 5>;
-			resets = <&usb_mod_clk 19>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
 			phy-names = "usb";
 			status = "disabled";
@@ -522,8 +320,9 @@
 			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 			reg = <0x00a02400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
-			resets = <&usb_mod_clk 19>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
 			phy-names = "usb";
 			status = "disabled";
@@ -532,20 +331,35 @@
 		usbphy3: phy@00a02800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a02800 0x4>;
-			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
-				 <&usb_phy_clk 5>;
-			clock-names = "hsic_480M", "hsic_12M", "phy";
-			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
-			reset-names = "hsic", "phy";
+			clocks = <&usb_clocks CLK_USB2_HSIC>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_PHY>;
+			clock-names = "hsic_480M",
+				      "hsic_12M",
+				      "phy";
+			resets = <&usb_clocks RST_USB2_HSIC>,
+				 <&usb_clocks RST_USB2_PHY>;
+			reset-names = "hsic",
+				      "phy";
 			status = "disabled";
 			#phy-cells = <0>;
 		};
 
+		usb_clocks: clock@00a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
-				 <&mmc0_clk 1>, <&mmc0_clk 2>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb", "mmc", "output", "sample";
 			resets = <&mmc_config_clk 0>;
 			reset-names = "ahb";
@@ -558,8 +372,9 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
-				 <&mmc1_clk 1>, <&mmc1_clk 2>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb", "mmc", "output", "sample";
 			resets = <&mmc_config_clk 1>;
 			reset-names = "ahb";
@@ -572,8 +387,9 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
-				 <&mmc2_clk 1>, <&mmc2_clk 2>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb", "mmc", "output", "sample";
 			resets = <&mmc_config_clk 2>;
 			reset-names = "ahb";
@@ -586,8 +402,9 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
-				 <&mmc3_clk 1>, <&mmc3_clk 2>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
 			clock-names = "ahb", "mmc", "output", "sample";
 			resets = <&mmc_config_clk 3>;
 			reset-names = "ahb";
@@ -600,9 +417,9 @@
 		mmc_config_clk: clk@01c13000 {
 			compatible = "allwinner,sun9i-a80-mmc-config-clk";
 			reg = <0x01c13000 0x10>;
-			clocks = <&ahb0_gates 8>;
+			clocks = <&ccu CLK_BUS_MMC>;
 			clock-names = "ahb";
-			resets = <&ahb0_resets 8>;
+			resets = <&ccu RST_BUS_MMC>;
 			reset-names = "ahb";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -621,34 +438,27 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		ahb0_resets: reset@060005a0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x060005a0 0x4>;
-		};
-
-		ahb1_resets: reset@060005a4 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x060005a4 0x4>;
-		};
-
-		ahb2_resets: reset@060005a8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x060005a8 0x4>;
-		};
-
-		apb0_resets: reset@060005b0 {
+		de_clocks: clock@03000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
 			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x060005b0 0x4>;
 		};
 
-		apb1_resets: reset@060005b4 {
+		ccu: clock@06000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
 			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x060005b4 0x4>;
 		};
 
 		timer@06000c00 {
@@ -678,7 +488,7 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -734,8 +544,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			resets = <&apb1_resets 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -745,8 +555,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			resets = <&apb1_resets 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -756,8 +566,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			resets = <&apb1_resets 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 
@@ -767,8 +577,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			resets = <&apb1_resets 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
 
@@ -778,8 +588,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
-			resets = <&apb1_resets 20>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
 
@@ -789,8 +599,8 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
-			resets = <&apb1_resets 21>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
 			status = "disabled";
 		};
 
@@ -798,8 +608,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002800 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 0>;
-			resets = <&apb1_resets 0>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -809,8 +619,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002c00 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 1>;
-			resets = <&apb1_resets 1>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -820,8 +630,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003000 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 2>;
-			resets = <&apb1_resets 2>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -831,8 +641,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003400 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 3>;
-			resets = <&apb1_resets 3>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -842,8 +652,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003800 0x400>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 4>;
-			resets = <&apb1_resets 4>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;