Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...

1 files changed, 52 insertions, 15 deletions

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 2e7c83c7253b..9a428931d042 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,14 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+		serial4 = &uarte;
+	};
+
 	host1x {
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -112,15 +120,6 @@
 		interrupts = <1 13 0x304>;
 	};
 
-	cache-controller@50043000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x50043000 0x1000>;
-		arm,data-latency = <5 5 2>;
-		arm,tag-latency = <4 4 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
 	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
 		reg = <0x50041000 0x1000
@@ -129,6 +128,15 @@
 		#interrupt-cells = <3>;
 	};
 
+	cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	timer@60005000 {
 		compatible = "nvidia,tegra20-timer";
 		reg = <0x60005000 0x60>;
@@ -199,6 +207,15 @@
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
 	};
+	
+	tegra_ac97: ac97 {
+		compatible = "nvidia,tegra20-ac97";
+		reg = <0x70002000 0x200>;
+		interrupts = <0 81 0x04>;
+		nvidia,dma-request-selector = <&apbdma 12>;
+		clocks = <&tegra_car 3>;
+		status = "disabled";
+	};
 
 	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
@@ -218,47 +235,59 @@
 		status = "disabled";
 	};
 
-	serial@70006000 {
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+	 * driver, the comptible is "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
 		interrupts = <0 36 0x04>;
+		nvidia,dma-request-selector = <&apbdma 8>;
 		clocks = <&tegra_car 6>;
 		status = "disabled";
 	};
 
-	serial@70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
 		interrupts = <0 37 0x04>;
+		nvidia,dma-request-selector = <&apbdma 9>;
 		clocks = <&tegra_car 96>;
 		status = "disabled";
 	};
 
-	serial@70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
 		interrupts = <0 46 0x04>;
+		nvidia,dma-request-selector = <&apbdma 10>;
 		clocks = <&tegra_car 55>;
 		status = "disabled";
 	};
 
-	serial@70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
 		interrupts = <0 90 0x04>;
+		nvidia,dma-request-selector = <&apbdma 19>;
 		clocks = <&tegra_car 65>;
 		status = "disabled";
 	};
 
-	serial@70006400 {
+	uarte: serial@70006400 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
 		interrupts = <0 91 0x04>;
+		nvidia,dma-request-selector = <&apbdma 20>;
 		clocks = <&tegra_car 66>;
 		status = "disabled";
 	};
@@ -375,6 +404,14 @@
 		status = "disabled";
 	};
 
+	kbc {
+		compatible = "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <0 85 0x04>;
+		clocks = <&tegra_car 36>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
@@ -387,7 +424,7 @@
 		interrupts = <0 77 0x04>;
 	};
 
-	gart {
+	iommu {
 		compatible = "nvidia,tegra20-gart";
 		reg = <0x7000f024 0x00000018	/* controller registers */
 		       0x58000000 0x02000000>;	/* GART aperture */