diff options
author | Thierry Reding <treding@nvidia.com> | 2022-11-22 11:21:18 +0100 |
---|---|---|
committer | Thierry Reding <treding@nvidia.com> | 2023-01-23 12:07:15 +0100 |
commit | d1e34a8abfd6c5ac196f278ac2c5633e3e35ee22 (patch) | |
tree | 53453dc7402826e86b15b1607932b9a0efc9ef1a /arch/arm/boot/dts/tegra30-ouya.dts | |
parent | Linux 6.2-rc1 (diff) | |
download | linux-d1e34a8abfd6c5ac196f278ac2c5633e3e35ee22.tar.xz linux-d1e34a8abfd6c5ac196f278ac2c5633e3e35ee22.zip |
ARM: tegra: Sort nodes by unit-address, then alphabetically
Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions are the
top-level aliases, chosen, firmware, memory and reserved-memory nodes,
which are expected to come first.
These rules apply recursively with some exceptions, such as pinmux nodes
or regulator nodes, which often follow more complicated ordering (often
by "importance").
While at it, change the name of some of the nodes to follow standard
naming conventions, which helps with the sorting order and reduces the
amount of warnings from the DT validation tools.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'arch/arm/boot/dts/tegra30-ouya.dts')
-rw-r--r-- | arch/arm/boot/dts/tegra30-ouya.dts | 207 |
1 files changed, 103 insertions, 104 deletions
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index b7acea39b942..eef27c82987b 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -26,6 +26,14 @@ stdout-path = "serial0:115200n8"; }; + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <0x0>; + tlm,version-minor = <0x0>; + }; + }; + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -2037,17 +2045,6 @@ status = "okay"; clock-frequency = <400000>; - cpu_temp: nct1008@4c { - compatible = "onnn,nct1008"; - reg = <0x4c>; - vcc-supply = <&sys_3v3_reg>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>; - - #thermal-sensor-cells = <1>; - }; - pmic: pmic@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -2161,6 +2158,17 @@ }; }; + cpu_temp: nct1008@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>; + + #thermal-sensor-cells = <1>; + }; + vdd_core: tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; @@ -4485,17 +4493,6 @@ status = "okay"; }; - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - - clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; - clock-names = "ext_clock"; - - reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>; - post-power-on-delay-ms = <300>; - power-off-delay-us = <300>; - }; - sdmmc3: mmc@78000400 { status = "okay"; @@ -4608,15 +4605,7 @@ }; }; - firmware { - trusted-foundations { - compatible = "tlm,trusted-foundations"; - tlm,version-major = <0x0>; - tlm,version-minor = <0x0>; - }; - }; - - fan: gpio_fan { + fan: fan { compatible = "gpio-fan"; gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 @@ -4624,50 +4613,50 @@ #cooling-cells = <2>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay = <5000>; - polling-delay-passive = <5000>; + gpio-keys { + compatible = "gpio-keys"; - thermal-sensors = <&cpu_temp 1>; + key-power { + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; - trips { - cpu_alert0: cpu-alert0 { - temperature = <50000>; - hysteresis = <10000>; - type = "active"; - }; - cpu_alert1: cpu-alert1 { - temperature = <70000>; - hysteresis = <5000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + leds { + compatible = "gpio-leds"; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&actmon THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; + led-power { + label = "power-led"; + gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + retain-state-suspended; }; }; - vdd_12v_in: vdd_12v_in { + opp-table-actmon { + /delete-node/ opp-900000000; + }; + + opp-table-emc { + /delete-node/ opp-900000000-1350; + }; + + wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + vdd_12v_in: regulator-vdd-12v-in { compatible = "regulator-fixed"; regulator-name = "vdd_12v_in"; regulator-min-microvolt = <12000000>; @@ -4675,7 +4664,7 @@ regulator-always-on; }; - sdmmc_3v3_reg: sdmmc_3v3_reg { + sdmmc_3v3_reg: regulator-sdmmc-3v3 { compatible = "regulator-fixed"; regulator-name = "sdmmc_3v3"; regulator-min-microvolt = <3300000>; @@ -4686,7 +4675,7 @@ vin-supply = <&sys_3v3_reg>; }; - vdd_fuse_3v3_reg: vdd_fuse_3v3_reg { + vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_fuse_3v3"; regulator-min-microvolt = <3300000>; @@ -4697,7 +4686,7 @@ regulator-always-on; }; - vdd_vid_reg: vdd_vid_reg { + vdd_vid_reg: regulator-vdd-vid { compatible = "regulator-fixed"; regulator-name = "vddio_vid"; regulator-min-microvolt = <5000000>; @@ -4708,7 +4697,7 @@ regulator-boot-on; }; - ddr_reg: ddr_reg { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>; @@ -4720,7 +4709,7 @@ vin-supply = <&vdd_12v_in>; }; - sys_3v3_reg: sys_3v3_reg { + sys_3v3_reg: regulator-sys-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>; @@ -4732,7 +4721,7 @@ vin-supply = <&vdd_12v_in>; }; - vdd_5v0_reg: vdd_5v0_reg { + vdd_5v0_reg: regulator-vdd-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>; @@ -4744,14 +4733,14 @@ vin-supply = <&vdd_12v_in>; }; - vdd_smsc: vdd_smsc { + vdd_smsc: regulator-vdd-smsc { compatible = "regulator-fixed"; regulator-name = "vdd_smsc"; enable-active-high; gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>; }; - usb3_vbus_reg: usb3_vbus_reg { + usb3_vbus_reg: regulator-usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>; @@ -4761,36 +4750,46 @@ vin-supply = <&vdd_5v0_reg>; }; - gpio-keys { - compatible = "gpio-keys"; - - key-power { - gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - debounce-interval = <10>; - linux,code = <KEY_POWER>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <5000>; + polling-delay-passive = <5000>; + thermal-sensors = <&cpu_temp 1>; - leds { - compatible = "gpio-leds"; + trips { + cpu_alert0: cpu-alert0 { + temperature = <50000>; + hysteresis = <10000>; + type = "active"; + }; + cpu_alert1: cpu-alert1 { + temperature = <70000>; + hysteresis = <5000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; - led-power { - label = "power-led"; - gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - retain-state-suspended; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; }; }; }; - -&emc_icc_dvfs_opp_table { - /delete-node/ opp-900000000-1350; -}; - -&emc_bw_dfs_opp_table { - /delete-node/ opp-900000000; -}; |