Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

1 files changed, 77 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 6a45bd24ffe6..db3b408ea55a 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -67,11 +67,17 @@
 
 			switch0: switch@0 {
 				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <512>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 
 				ports {
 					#address-cells = <1>;
@@ -91,21 +97,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan1";
+						phy-handle = <&switch0phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan2";
+						phy-handle = <&switch0phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan3";
+						phy-handle = <&switch0phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan4";
+						phy-handle = <&switch0phy4>;
 					};
 
 					switch0port10: port@10 {
@@ -115,6 +125,35 @@
 						link = <&switch1port10>;
 					};
 				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch0phy1: switch0phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy2: switch0phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy3: switch0phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch0>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy4: switch0phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch0>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};
 
@@ -125,11 +164,17 @@
 
 			switch1: switch@0 {
 				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <512>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 
 				ports {
 					#address-cells = <1>;
@@ -138,21 +183,25 @@
 					port@1 {
 						reg = <1>;
 						label = "lan5";
+						phy-handle = <&switch1phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan6";
+						phy-handle = <&switch1phy2>;
 					};
 
 					port@3 {
 						reg = <3>;
 						label = "lan7";
+						phy-handle = <&switch1phy3>;
 					};
 
 					port@4 {
 						reg = <4>;
 						label = "lan8";
+						phy-handle = <&switch1phy4>;
 					};
 
 
@@ -163,6 +212,34 @@
 						link = <&switch0port10>;
 					};
 				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy1: switch1phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy3: switch1phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch1>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy4: switch1phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch1>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
 			};
 		};