ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 179 deletions

diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
deleted file mode 100644
index b7e09eff5bb2..000000000000
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * vt8500.dtsi - Device tree file for VIA VT8500 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "via,vt8500";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		intc: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "via,vt8500-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clkuart2: uart2 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <3>;
-				};
-
-				clkuart3: uart3 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <4>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <43>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <43>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "via,vt8500-fb";
-			reg = <0xd800e400 0x400>;
-			interrupts = <12>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		uart2: serial@d8210000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8210000 0x1040>;
-			interrupts = <47>;
-			clocks = <&clkuart2>;
-			status = "disabled";
-		};
-
-		uart3: serial@d82c0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82c0000 0x1040>;
-			interrupts = <50>;
-			clocks = <&clkuart3>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-		};
-	};
-};