diff options
author | Tony Lindgren <tony@atomide.com> | 2016-09-15 01:27:28 +0200 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2016-09-15 01:27:28 +0200 |
commit | a2a2b8215621536a7620e31f36bede81bb86680b (patch) | |
tree | 94b2bcedaac82c999041e1e7b281ce46ed9f429f /arch/arm/boot/dts | |
parent | ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz (diff) | |
parent | Revert "ARM: dts: dra7: Move to operating-points-v2 table" (diff) | |
download | linux-a2a2b8215621536a7620e31f36bede81bb86680b.tar.xz linux-a2a2b8215621536a7620e31f36bede81bb86680b.zip |
Merge branch 'am335x-cpufreq-regression' into omap-for-v4.9/dt-v2
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r-- | arch/arm/boot/dts/am335x-boneblack.dts | 11 | ||||
-rw-r--r-- | arch/arm/boot/dts/am33xx.dtsi | 88 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7.dtsi | 26 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra74x.dtsi | 1 |
4 files changed, 18 insertions, 108 deletions
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index ca721670bd91..55c0e954b146 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -33,17 +33,6 @@ status = "okay"; }; -&cpu0_opp_table { - /* - * All PG 2.0 silicon may not support 1GHz but some of the early - * BeagleBone Blacks have PG 2.0 silicon which is guaranteed - * to support 1GHz OPP so enable it for PG 2.0 on this board. - */ - oppnitro@1000000000 { - opp-supported-hw = <0x06 0x0100>; - }; -}; - &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index eeef6bc8e410..194d884c9de1 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -45,9 +45,19 @@ device_type = "cpu"; reg = <0>; - operating-points-v2 = <&cpu0_opp_table>; - ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>; - ti,syscon-rev = <&scm_conf 0x600>; + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -56,78 +66,6 @@ }; }; - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - - /* - * The three following nodes are marked with opp-suspend - * because the can not be enabled simultaneously on a - * single SoC. - */ - opp50@300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100@275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100@300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100@500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100@600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120@600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120@720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo@720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo@800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; - }; - pmu { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 147df90d2126..d4fcd68f6349 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,9 +80,11 @@ compatible = "arm,cortex-a15"; reg = <0>; - operating-points-v2 = <&cpu0_opp_table>; - ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>; - ti,syscon-rev = <&scm_wkup 0x204>; + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -96,24 +98,6 @@ }; }; - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp_nom@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1060000 850000 1150000>; - opp-supported-hw = <0xFF 0x01>; - opp-suspend; - }; - - opp_od@1176000000 { - opp-hz = /bits/ 64 <1176000000>; - opp-microvolt = <1160000 885000 1160000>; - opp-supported-hw = <0xFF 0x02>; - }; - }; - /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8987b3e180a1..0a78347e6615 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -17,7 +17,6 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - operating-points-v2 = <&cpu0_opp_table>; }; }; |