ARM: dts: ux500: Push VMMCI down to each tree

The setting of VMMCI differs so much between different
boards that we need to handle it on a per-board basis
rather that complicating things by overriding stuff from
the included DTSI:s. Push it down into top-level tree
instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

8 files changed, 153 insertions, 42 deletions

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index ff47cbf6ed3b..8c03124b6960 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -113,21 +113,6 @@
 			status = "okay";
 		};
 
-		/* ST6G3244ME level translator for 1.8/2.9 V */
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-		};
-
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
index f8c0c1e6aa04..a036a03f6718 100644
--- a/arch/arm/boot/dts/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -12,11 +12,43 @@
 	model = "ST-Ericsson HREF520 and TVK1281618 UIB";
 	compatible = "st-ericsson,href520", "st-ericsson,u8500";
 
-	soc {
-		vmmci: regulator-gpio {
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmci_default_mode>;
+	};
+};
+
+&pinctrl {
+	vmmci {
+		vmmci_default_mode: vmmc_default {
+			/* VMMCI level-shifter enable */
+			default_href520_cfg1 {
+				pins = "GPIO78_F4";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* VMMCI level-shifter voltage select */
+			default_href520_cfg2 {
+				pins = "GPIO5_AG6";
+				ste,config = <&gpio_out_hi>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 8ce6b723abf2..dfc933214c1a 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -12,6 +12,25 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 142f5475521f..4e6e4439dcff 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -11,4 +11,23 @@
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 115495de8612..931998dd364b 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -65,12 +65,6 @@
 			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		vmmci: regulator-gpio {
-			gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
 		pinctrl {
 			/* Set this up using hogs */
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 1316886e6bcb..52c56ed17ae6 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -14,6 +14,28 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmci_default_mode>;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
@@ -33,3 +55,20 @@
 		};
 	};
 };
+
+&pinctrl {
+	vmmci {
+		vmmci_default_mode: vmmc_default {
+			/* VMMCI level-shifter enable */
+			default_hrefv60_cfg2 {
+				pins = "GPIO169_D22";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* VMMCI level-shifter voltage select */
+			default_hrefv60_cfg3 {
+				pins = "GPIO5_AG6";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index 5d4b8245f02c..9c2d2ee6d6d8 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -13,4 +13,43 @@
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmci_default_mode>;
+	};
+};
+
+&pinctrl {
+	vmmci {
+		vmmci_default_mode: vmmc_default {
+			/* VMMCI level-shifter enable */
+			default_hrefv60_cfg2 {
+				pins = "GPIO169_D22";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* VMMCI level-shifter voltage select */
+			default_hrefv60_cfg3 {
+				pins = "GPIO5_AG6";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index ee0bf00a94b8..05ea12e6df1c 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -194,12 +194,6 @@
 			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
-		vmmci: regulator-gpio {
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
 		pinctrl {
 			/*
 			 * Set this up using hogs, as time goes by and as seems fit, these
@@ -224,16 +218,6 @@
 						pins = "GPIO95_E8";
 						ste,config = <&gpio_in_pu>;
 					};
-					/* VMMCI level-shifter enable */
-					default_hrefv60_cfg2 {
-						pins = "GPIO169_D22";
-						ste,config = <&gpio_out_hi>;
-					};
-					/* VMMCI level-shifter voltage select */
-					default_hrefv60_cfg3 {
-						pins = "GPIO5_AG6";
-						ste,config = <&gpio_out_hi>;
-					};
 				};
 			};
 			ipgpio {