summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-17 00:48:26 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-17 00:48:26 +0100
commit527d1470744d338c912f94bc1f4dba08ffdff349 (patch)
tree36efab7e8fecaac465986b315c014166c03a079e /arch/arm/boot/dts
parentMerge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/a... (diff)
parentarm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 (diff)
downloadlinux-527d1470744d338c912f94bc1f4dba08ffdff349.tar.xz
linux-527d1470744d338c912f94bc1f4dba08ffdff349.zip
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/Makefile41
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts239
-rw-r--r--arch/arm/boot/dts/armada-370-synology-ds213j.dts12
-rw-r--r--arch/arm/boot/dts/armada-385-synology-ds116.dts12
-rw-r--r--arch/arm/boot/dts/armada-xp-synology-ds414.dts12
-rw-r--r--arch/arm/boot/dts/artpec6.dtsi3
-rw-r--r--arch/arm/boot/dts/aspeed-ast2500-evb.dts19
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts56
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts58
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi1818
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi1808
-rw-r--r--arch/arm/boot/dts/at91-ariag25.dts4
-rw-r--r--arch/arm/boot/dts/at91-ariettag25.dts4
-rw-r--r--arch/arm/boot/dts/at91-cosino_mega2560.dts4
-rw-r--r--arch/arm/boot/dts/at91-kizbox2.dts4
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini.dts4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts52
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts47
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts6
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts6
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_xplained.dts6
-rw-r--r--arch/arm/boot/dts/at91-sama5d4ek.dts6
-rw-r--r--arch/arm/boot/dts/at91-vinco.dts6
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi4
-rw-r--r--arch/arm/boot/dts/at91rm9200ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9261ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9263ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9g20.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts4
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9rlek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9x25ek.dts10
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9x5ek.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9xe.dtsi4
-rw-r--r--arch/arm/boot/dts/axp209.dtsi2
-rw-r--r--arch/arm/boot/dts/axp81x.dtsi139
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi28
-rw-r--r--arch/arm/boot/dts/bcm-hr2.dtsi368
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi8
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts5
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts63
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts63
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts50
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-810.dts87
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi6
-rw-r--r--arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts85
-rw-r--r--arch/arm/boot/dts/bcm53573.dtsi2
-rw-r--r--arch/arm/boot/dts/berlin2.dtsi6
-rw-r--r--arch/arm/boot/dts/berlin2cd.dtsi6
-rw-r--r--arch/arm/boot/dts/berlin2q.dtsi6
-rw-r--r--arch/arm/boot/dts/da850-lcdk.dts18
-rw-r--r--arch/arm/boot/dts/da850.dtsi12
-rw-r--r--arch/arm/boot/dts/dove.dtsi14
-rw-r--r--arch/arm/boot/dts/dra7-evm-common.dtsi4
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts4
-rw-r--r--arch/arm/boot/dts/dra7.dtsi2
-rw-r--r--arch/arm/boot/dts/ep7211-edb7211.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos3250-monk.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts24
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4210-pinctrl.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi8
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-pinctrl.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts117
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts22
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts20
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-common.dtsi20
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts18
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi24
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts6
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts2
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts6
-rw-r--r--arch/arm/boot/dts/exynos5420-cpus.dtsi8
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts9
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi11
-rw-r--r--arch/arm/boot/dts/exynos5422-cpus.dtsi8
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi443
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidhc1.dts213
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi13
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi711
-rw-r--r--arch/arm/boot/dts/exynos5440-ssdk5440.dts2
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi4
-rw-r--r--arch/arm/boot/dts/ge863-pro3.dtsi2
-rw-r--r--arch/arm/boot/dts/gemini.dtsi21
-rw-r--r--arch/arm/boot/dts/hip01.dtsi4
-rw-r--r--arch/arm/boot/dts/hip04-d01.dts2
-rw-r--r--arch/arm/boot/dts/hisi-x5hd2.dtsi30
-rw-r--r--arch/arm/boot/dts/imx1.dtsi44
-rw-r--r--arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts2
-rw-r--r--arch/arm/boot/dts/imx25-pdk.dts10
-rw-r--r--arch/arm/boot/dts/imx28-apx4devkit.dts2
-rw-r--r--arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi2
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-tx28.dts177
-rw-r--r--arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts2
-rw-r--r--arch/arm/boot/dts/imx50.dtsi3
-rw-r--r--arch/arm/boot/dts/imx51-apf51dev.dts10
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts14
-rw-r--r--arch/arm/boot/dts/imx51-ts4800.dts8
-rw-r--r--arch/arm/boot/dts/imx51-zii-rdu1.dts834
-rw-r--r--arch/arm/boot/dts/imx51.dtsi4
-rw-r--r--arch/arm/boot/dts/imx53-m53evk.dts6
-rw-r--r--arch/arm/boot/dts/imx53-mba53.dts2
-rw-r--r--arch/arm/boot/dts/imx53-ppd.dts1042
-rw-r--r--arch/arm/boot/dts/imx53-qsb-common.dtsi6
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts4
-rw-r--r--arch/arm/boot/dts/imx53-tx53-x03x.dts86
-rw-r--r--arch/arm/boot/dts/imx53-tx53-x13x.dts116
-rw-r--r--arch/arm/boot/dts/imx53-tx53.dtsi166
-rw-r--r--arch/arm/boot/dts/imx53-voipac-bsb.dts2
-rw-r--r--arch/arm/boot/dts/imx53.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6dl-aristainetos2_4.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-aristainetos_4.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-aristainetos_7.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-icore.dts9
-rw-r--r--arch/arm/boot/dts/imx6dl-riotboard.dts4
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts74
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6s-8034.dts171
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6s-8035.dts171
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-801x.dts161
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-8033.dts170
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-811x.dts132
-rw-r--r--arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts215
-rw-r--r--arch/arm/boot/dts/imx6dl-wandboard-revd1.dts22
-rw-r--r--arch/arm/boot/dts/imx6dl.dtsi16
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-eval.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-bx50v3.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6q-cm-fx6.dts5
-rw-r--r--arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts51
-rw-r--r--arch/arm/boot/dts/imx6q-display5.dtsi596
-rw-r--r--arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-gw5400-a.dts221
-rw-r--r--arch/arm/boot/dts/imx6q-h100.dts4
-rw-r--r--arch/arm/boot/dts/imx6q-icore-rqs.dts24
-rw-r--r--arch/arm/boot/dts/imx6q-mccmon6.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-novena.dts6
-rw-r--r--arch/arm/boot/dts/imx6q-pistachio.dts693
-rw-r--r--arch/arm/boot/dts/imx6q-tbs2910.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts74
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1010.dts163
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts74
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1020.dts162
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1036.dts170
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-1110.dts134
-rw-r--r--arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts222
-rw-r--r--arch/arm/boot/dts/imx6q-utilite-pro.dts8
-rw-r--r--arch/arm/boot/dts/imx6q-wandboard-revd1.dts26
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi16
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-apf6dev.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-colibri.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw51xx.dtsi300
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw52xx.dtsi374
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw53xx.dtsi360
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw54xx.dtsi390
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw551x.dtsi182
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw552x.dtsi174
-rw-r--r--arch/arm/boot/dts/imx6qdl-hummingboard.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi94
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore.dtsi97
-rw-r--r--arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-rex.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabrelite.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi252
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi286
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi99
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6.dtsi106
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi196
-rw-r--r--arch/arm/boot/dts/imx6qdl-wandboard.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi5
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi178
-rw-r--r--arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts48
-rw-r--r--arch/arm/boot/dts/imx6qp-tx6qp-8037.dts86
-rw-r--r--arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts57
-rw-r--r--arch/arm/boot/dts/imx6qp-tx6qp-8137.dts90
-rw-r--r--arch/arm/boot/dts/imx6qp-wandboard-revd1.dts26
-rw-r--r--arch/arm/boot/dts/imx6qp.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6sl-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi134
-rw-r--r--arch/arm/boot/dts/imx6sx-nitrogen6sx.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb-reva.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx-softing-vining-2000.dts572
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi199
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-pico-hobbit.dts6
-rw-r--r--arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-tx6ul.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi161
-rw-r--r--arch/arm/boot/dts/imx7-colibri.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7d-nitrogen7.dts2
-rw-r--r--arch/arm/boot/dts/imx7d-pico.dts43
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts2
-rw-r--r--arch/arm/boot/dts/imx7s-warp.dts4
-rw-r--r--arch/arm/boot/dts/integrator.dtsi10
-rw-r--r--arch/arm/boot/dts/integratorap.dts25
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-common.dtsi152
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi43
-rw-r--r--arch/arm/boot/dts/keystone-k2e.dtsi6
-rw-r--r--arch/arm/boot/dts/keystone-k2g-evm.dts93
-rw-r--r--arch/arm/boot/dts/keystone-k2g.dtsi242
-rw-r--r--arch/arm/boot/dts/keystone-k2hk.dtsi8
-rw-r--r--arch/arm/boot/dts/keystone-k2l.dtsi12
-rw-r--r--arch/arm/boot/dts/keystone.dtsi12
-rw-r--r--arch/arm/boot/dts/kirkwood-synology.dtsi12
-rw-r--r--arch/arm/boot/dts/kirkwood-ts219.dtsi12
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi4
-rw-r--r--arch/arm/boot/dts/lpc3250-ea3250.dts8
-rw-r--r--arch/arm/boot/dts/lpc3250-phy3250.dts10
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi2
-rw-r--r--arch/arm/boot/dts/meson.dtsi47
-rw-r--r--arch/arm/boot/dts/meson6.dtsi3
-rw-r--r--arch/arm/boot/dts/meson8.dtsi40
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts23
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi59
-rw-r--r--arch/arm/boot/dts/mpa1600.dts2
-rw-r--r--arch/arm/boot/dts/mt2701-evb.dts23
-rw-r--r--arch/arm/boot/dts/mt2701.dtsi13
-rw-r--r--arch/arm/boot/dts/mt6589.dtsi2
-rw-r--r--arch/arm/boot/dts/mt7623.dtsi30
-rw-r--r--arch/arm/boot/dts/nspire.dtsi2
-rw-r--r--arch/arm/boot/dts/omap2420-n8x0-common.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-evm-37xx.dts209
-rw-r--r--arch/arm/boot/dts/omap3-evm-processor-common.dtsi216
-rw-r--r--arch/arm/boot/dts/omap3-evm.dts76
-rw-r--r--arch/arm/boot/dts/omap3-lilly-a83x.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts2
-rw-r--r--arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi1
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi4
-rw-r--r--arch/arm/boot/dts/omap4.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi4
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/boot/dts/owl-s500-cubieboard6.dts44
-rw-r--r--arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts7
-rw-r--r--arch/arm/boot/dts/owl-s500.dtsi3
-rw-r--r--arch/arm/boot/dts/ox810se.dtsi4
-rw-r--r--arch/arm/boot/dts/ox820.dtsi2
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x2.dtsi2
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x3.dtsi2
-rw-r--r--arch/arm/boot/dts/pm9g45.dts4
-rw-r--r--arch/arm/boot/dts/qcom-apq8060-dragonboard.dts12
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi5
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi89
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts321
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts641
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi30
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro.dtsi18
-rw-r--r--arch/arm/boot/dts/r7s72100-gr-peach.dts73
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a73a4.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts19
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20d-q7.dts42
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20m.dtsi43
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi339
-rw-r--r--arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts109
-rw-r--r--arch/arm/boot/dts/r8a7745-iwg22m.dtsi111
-rw-r--r--arch/arm/boot/dts/r8a7745.dtsi429
-rw-r--r--arch/arm/boot/dts/r8a7778.dtsi11
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi18
-rw-r--r--arch/arm/boot/dts/r8a7790-lager.dts7
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi783
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts4
-rw-r--r--arch/arm/boot/dts/r8a7791-porter.dts4
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi777
-rw-r--r--arch/arm/boot/dts/r8a7792-blanche.dts3
-rw-r--r--arch/arm/boot/dts/r8a7792-wheat.dts3
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi409
-rw-r--r--arch/arm/boot/dts/r8a7793-gose.dts4
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi643
-rw-r--r--arch/arm/boot/dts/r8a7794-alt.dts7
-rw-r--r--arch/arm/boot/dts/r8a7794-silk.dts3
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi715
-rw-r--r--arch/arm/boot/dts/rk3036-kylin.dts5
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi19
-rw-r--r--arch/arm/boot/dts/rk3066a-rayeager.dts2
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi24
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts4
-rw-r--r--arch/arm/boot/dts/rk3188.dtsi24
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi21
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload.dts11
-rw-r--r--arch/arm/boot/dts/rk3288-popmetal.dts2
-rw-r--r--arch/arm/boot/dts/rk3288-vyasa.dts498
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi75
-rw-r--r--arch/arm/boot/dts/rk3xxx.dtsi11
-rw-r--r--arch/arm/boot/dts/rv1108-evb.dts4
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi67
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi12
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi8
-rw-r--r--arch/arm/boot/dts/sama5d3xmb.dtsi6
-rw-r--r--arch/arm/boot/dts/sama5d3xmb_cmp.dtsi2
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi10
-rw-r--r--arch/arm/boot/dts/sh73a0.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-href-stuib.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi2
-rw-r--r--arch/arm/boot/dts/stih407-clock.dtsi6
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi18
-rw-r--r--arch/arm/boot/dts/stih407-pinctrl.dtsi52
-rw-r--r--arch/arm/boot/dts/stih410-b2120.dts2
-rw-r--r--arch/arm/boot/dts/stih410-b2260.dts4
-rw-r--r--arch/arm/boot/dts/stih410-clock.dtsi6
-rw-r--r--arch/arm/boot/dts/stih410.dtsi2
-rw-r--r--arch/arm/boot/dts/stih418-b2199.dts4
-rw-r--r--arch/arm/boot/dts/stih418-clock.dtsi6
-rw-r--r--arch/arm/boot/dts/stih418.dtsi2
-rw-r--r--arch/arm/boot/dts/stihxxx-b2120.dtsi6
-rw-r--r--arch/arm/boot/dts/stm32746g-eval.dts24
-rw-r--r--arch/arm/boot/dts/stm32f4-pinctrl.dtsi176
-rw-r--r--arch/arm/boot/dts/stm32f746-disco.dts30
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi363
-rw-r--r--arch/arm/boot/dts/stm32h743-pinctrl.dtsi32
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi177
-rw-r--r--arch/arm/boot/dts/stm32h743i-eval.dts2
-rw-r--r--arch/arm/boot/dts/sun4i-a10-a1000.dts28
-rw-r--r--arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts16
-rw-r--r--arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts20
-rw-r--r--arch/arm/boot/dts/sun4i-a10-cubieboard.dts45
-rw-r--r--arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts50
-rw-r--r--arch/arm/boot/dts/sun4i-a10-gemei-g9.dts23
-rw-r--r--arch/arm/boot/dts/sun4i-a10-hackberry.dts24
-rw-r--r--arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts10
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet1.dts36
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet97fv2.dts24
-rw-r--r--arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts68
-rw-r--r--arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts21
-rw-r--r--arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts26
-rw-r--r--arch/arm/boot/dts/sun4i-a10-marsboard.dts25
-rw-r--r--arch/arm/boot/dts/sun4i-a10-mini-xplus.dts10
-rw-r--r--arch/arm/boot/dts/sun4i-a10-mk802.dts24
-rw-r--r--arch/arm/boot/dts/sun4i-a10-mk802ii.dts6
-rw-r--r--arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts47
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pcduino.dts32
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pcduino2.dts9
-rw-r--r--arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts43
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi1166
-rw-r--r--arch/arm/boot/dts/sun5i-a10s.dtsi6
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi4
-rw-r--r--arch/arm/boot/dts/sun5i-gr8.dtsi8
-rw-r--r--arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi8
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi86
-rw-r--r--arch/arm/boot/dts/sun6i-a31-hummingbird.dts21
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi209
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-primo81.dts25
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-sina31s.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubieboard2.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubietruck.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts33
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts70
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts44
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi1147
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi62
-rw-r--r--arch/arm/boot/dts/sun8i-a23.dtsi4
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi18
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts147
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts169
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts187
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts349
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi41
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts9
-rw-r--r--arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts39
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts71
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts6
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts7
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi.dtsi8
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-2.dts16
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts6
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-one.dts14
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts5
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts14
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts24
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts16
-rw-r--r--arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts209
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi473
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi32
-rw-r--r--arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts173
-rw-r--r--arch/arm/boot/dts/sun9i-a80-cubieboard4.dts30
-rw-r--r--arch/arm/boot/dts/sun9i-a80-optimus.dts50
-rw-r--r--arch/arm/boot/dts/sun9i-a80.dtsi117
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi164
-rw-r--r--arch/arm/boot/dts/sunxi-itead-core-common.dtsi4
-rw-r--r--arch/arm/boot/dts/tango4-common.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts4
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi12
-rw-r--r--arch/arm/boot/dts/uniphier-ld4-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-ld4.dtsi25
-rw-r--r--arch/arm/boot/dts/uniphier-ld6b-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-pinctrl.dtsi46
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi27
-rw-r--r--arch/arm/boot/dts/uniphier-pro5.dtsi29
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi80
-rw-r--r--arch/arm/boot/dts/uniphier-sld8-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-sld8.dtsi29
-rw-r--r--arch/arm/boot/dts/uniphier-support-card.dtsi3
-rw-r--r--arch/arm/boot/dts/usb_a9263.dts2
-rw-r--r--arch/arm/boot/dts/usb_a9g20_common.dtsi4
-rw-r--r--arch/arm/boot/dts/vf610-twr.dts2
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-c.dts2
-rw-r--r--arch/arm/boot/dts/zx296702.dtsi4
-rw-r--r--arch/arm/boot/dts/zynq-zc702.dts2
-rw-r--r--arch/arm/boot/dts/zynq-zc706.dts2
439 files changed, 22261 insertions, 11301 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 25dcf4e534e6..d0381e9caf21 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -101,6 +101,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
@@ -109,6 +111,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-luxul-xap-1440.dtb \
+ bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
@@ -118,6 +122,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
bcm911360k.dtb \
bcm958300k.dtb \
bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+ bcm53340-ubnt-unifi-switch8.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb \
@@ -177,6 +183,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
@@ -342,12 +349,14 @@ dtb-$(CONFIG_SOC_IMX51) += \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
- imx51-ts4800.dtb
+ imx51-ts4800.dtb \
+ imx51-zii-rdu1.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-cx9020.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
+ imx53-ppd.dtb \
imx53-qsb.dtb \
imx53-qsrb.dtb \
imx53-smd.dtb \
@@ -389,14 +398,19 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
+ imx6dl-tx6s-8034-mb7.dtb \
imx6dl-tx6s-8035.dtb \
+ imx6dl-tx6s-8035-mb7.dtb \
imx6dl-tx6u-801x.dtb \
+ imx6dl-tx6u-80xx-mb7.dtb \
imx6dl-tx6u-8033.dtb \
+ imx6dl-tx6u-8033-mb7.dtb \
imx6dl-tx6u-811x.dtb \
imx6dl-tx6u-81xx-mb7.dtb \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
+ imx6dl-wandboard-revd1.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apalis-ixora-v1.1.dtb \
@@ -408,6 +422,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
+ imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-evi.dtb \
imx6q-gk802.dtb \
@@ -435,6 +450,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
+ imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
@@ -448,17 +464,25 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1036.dtb \
+ imx6q-tx6q-1036-mb7.dtb \
+ imx6q-tx6q-10x0-mb7.dtb \
imx6q-tx6q-1110.dtb \
imx6q-tx6q-11x0-mb7.dtb \
imx6q-udoo.dtb \
imx6q-utilite-pro.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6q-wandboard-revd1.dtb \
imx6q-zii-rdu2.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
+ imx6qp-tx6qp-8037.dtb \
+ imx6qp-tx6qp-8037-mb7.dtb \
+ imx6qp-tx6qp-8137.dtb \
+ imx6qp-tx6qp-8137-mb7.dtb \
+ imx6qp-wandboard-revd1.dtb \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
@@ -469,6 +493,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
imx6sx-sdb.dtb \
+ imx6sx-softing-vining-2000.dtb \
imx6sx-udoo-neo-basic.dtb \
imx6sx-udoo-neo-extended.dtb \
imx6sx-udoo-neo-full.dtb
@@ -681,6 +706,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-netgear-wnr854t.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += \
+ owl-s500-cubieboard6.dtb \
owl-s500-guitar-bb-rev-b.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
@@ -701,7 +727,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8974-fairphone-fp2.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
@@ -725,7 +753,9 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7743-iwg20d-q7.dtb \
+ r8a7743-iwg20d-q7-dbcm-ca.dtb \
r8a7743-sk-rzg1m.dtb \
+ r8a7745-iwg22d-sodimm.dtb \
r8a7745-sk-rzg1e.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
@@ -768,7 +798,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
- rk3288-veyron-speedy.dtb
+ rk3288-veyron-speedy.dtb \
+ rk3288-vyasa.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
@@ -891,6 +922,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-olinuxino-micro-emmc.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
@@ -916,6 +948,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-tbs-a711.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-beelink-x2.dtb \
@@ -932,8 +965,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-parrot.dtb \
+ sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb \
- sun8i-v3s-licheepi-zero-dock.dtb
+ sun8i-v3s-licheepi-zero-dock.dtb \
+ sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 081fa68b6f98..a04d79ec212a 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -75,6 +75,9 @@
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&matrix_keypad_default>;
+ pinctrl-1 = <&matrix_keypad_sleep>;
row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
&gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
@@ -145,6 +148,43 @@
};
&am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&unused_pins>;
+
+ unused_pins: unused_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -198,7 +238,7 @@
>;
};
- nand_flash_x8: nand_flash_x8 {
+ nand_flash_x8_default: nand_flash_x8_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
@@ -219,12 +259,39 @@
>;
};
- ecap0_pins: backlight_pins {
+ nand_flash_x8_sleep: nand_flash_x8_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ ecap0_pins_default: backlight_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
+ ecap0_pins_sleep: backlight_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
@@ -232,7 +299,7 @@
>;
};
- spi0_pins: pinmux_spi0_pins {
+ spi0_pins_default: pinmux_spi0_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
@@ -241,7 +308,16 @@
>;
};
- spi1_pins: pinmux_spi1_pins {
+ spi0_pins_sleep: pinmux_spi0_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ spi1_pins_default: pinmux_spi1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
@@ -250,13 +326,54 @@
>;
};
- mmc1_pins: pinmux_mmc1_pins {
+ spi1_pins_sleep: pinmux_spi1_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
- qspi1_default: qspi1_default {
+ mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
+ >;
+ };
+
+ matrix_keypad_default: matrix_keypad_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */
+ AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */
+ AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd3.gpio2_18 */
+ AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd2.gpio2_19 */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ >;
+ };
+
+ matrix_keypad_sleep: matrix_keypad_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ qspi1_pins_default: qspi1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
@@ -267,12 +384,29 @@
>;
};
- pixcir_ts_pins: pixcir_ts_pins {
+ qspi1_pins_sleep: qspi1_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ pixcir_ts_pins_default: pixcir_ts_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
+ pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
+ >;
+ };
+
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
@@ -355,6 +489,48 @@
>;
};
+ uart0_pins_default: uart0_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart0_pins_sleep: uart0_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+ AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy1_default: usb2_phy1_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy1_sleep: usb2_phy1_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ usb2_phy2_default: usb2_phy2_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy2_sleep: usb2_phy2_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
@@ -378,8 +554,9 @@
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
@@ -478,8 +655,10 @@
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
- pinctrl-names = "default";
- pinctrl-0 = <&pixcir_ts_pins>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pixcir_ts_pins_default>;
+ pinctrl-1 = <&pixcir_ts_pins_sleep>;
+
reg = <0x5c>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
@@ -550,8 +729,9 @@
&gpmc {
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
- pinctrl-names = "default";
- pinctrl-0 = <&nand_flash_x8>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&nand_flash_x8_default>;
+ pinctrl-1 = <&nand_flash_x8_sleep>;
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
@@ -647,24 +827,30 @@
&ecap0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ecap0_pins>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ecap0_pins_default>;
+ pinctrl-1 = <&ecap0_pins_sleep>;
};
&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi0_pins_default>;
+ pinctrl-1 = <&spi0_pins_sleep>;
};
&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_pins_default>;
+ pinctrl-1 = <&spi1_pins_sleep>;
};
&usb2_phy1 {
status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb2_phy1_default>;
+ pinctrl-1 = <&usb2_phy1_sleep>;
};
&usb1 {
@@ -674,6 +860,9 @@
&usb2_phy2 {
status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb2_phy2_default>;
+ pinctrl-1 = <&usb2_phy2_sleep>;
};
&usb2 {
@@ -683,8 +872,9 @@
&qspi {
status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
- pinctrl-names = "default";
- pinctrl-0 = <&qspi1_default>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi1_pins_default>;
+ pinctrl-1 = <&qspi1_pins_sleep>;
spi-max-frequency = <48000000>;
m25p80@0 {
@@ -770,6 +960,13 @@
};
};
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_pins_default>;
+ pinctrl-1 = <&uart0_pins_sleep>;
+};
+
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 4978011df5bd..95040810c094 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -316,32 +316,32 @@
* change the default environment, unless you know
* what you are doing.
*/
- partition@00000000 { /* u-boot */
+ partition@0 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
- partition@000c0000 { /* uImage */
+ partition@c0000 { /* uImage */
label = "zImage";
reg = <0x000c0000 0x002d0000>; /* 2880KB */
};
- partition@00390000 { /* uInitramfs */
+ partition@390000 { /* uInitramfs */
label = "rd.gz";
reg = <0x00390000 0x00440000>; /* 4250KB */
};
- partition@007d0000 { /* MAC address and serial number */
+ partition@7d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
- partition@007e0000 {
+ partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
- partition@007f0000 {
+ partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index 31510eb56f10..36ad571e76f3 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -267,35 +267,35 @@
* enumerated. The MAC address and the serial number are listed
* in the "vendor" partition.
*/
- partition@00000000 {
+ partition@0 {
label = "RedBoot";
reg = <0x00000000 0x000f0000>;
read-only;
};
- partition@000c0000 {
+ partition@c0000 {
label = "zImage";
reg = <0x000f0000 0x002d0000>;
};
- partition@00390000 {
+ partition@390000 {
label = "rd.gz";
reg = <0x003c0000 0x00410000>;
};
- partition@007d0000 {
+ partition@7d0000 {
label = "vendor";
reg = <0x007d0000 0x00010000>;
read-only;
};
- partition@007e0000 {
+ partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>;
read-only;
};
- partition@007f0000 {
+ partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>;
read-only;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index d8e05bab0cee..d7228a5461c8 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -332,32 +332,32 @@
* change the default environment, unless you know
* what you are doing.
*/
- partition@00000000 { /* u-boot */
+ partition@0 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000d0000>; /* 832KB */
};
- partition@000c0000 { /* uImage */
+ partition@c0000 { /* uImage */
label = "zImage";
reg = <0x000d0000 0x002d0000>; /* 2880KB */
};
- partition@003a0000 { /* uInitramfs */
+ partition@3a0000 { /* uInitramfs */
label = "rd.gz";
reg = <0x003a0000 0x00430000>; /* 4250KB */
};
- partition@007d0000 { /* MAC address and serial number */
+ partition@7d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
- partition@007e0000 {
+ partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
- partition@007f0000 {
+ partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 767cbe8d8557..2ed11773048d 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -151,7 +151,6 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
- interrupt-parent = <&intc>;
};
pcie: pcie@f8050000 {
@@ -185,7 +184,6 @@
compatible = "simple-bus";
#address-cells = <0x1>;
#size-cells = <0x1>;
- interrupt-parent = <&intc>;
ranges;
dma-ranges = <0x80000000 0x00000000 0x40000000>;
dma-coherent;
@@ -195,7 +193,6 @@
clocks = <&eth_phy_ref_clk>,
<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
compatible = "snps,dwc-qos-ethernet-4.10";
- interrupt-parent = <&intc>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf8010000 0x4000>;
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index f53e89d63477..602bc10fdaf4 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -60,3 +60,22 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index e1b523bd5b8b..c786bc2f2919 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -7,10 +7,6 @@
model = "Palmetto BMC";
compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
- aliases {
- serial4 = &uart5;
- };
-
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
@@ -62,3 +58,55 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds3231";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp423@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 6dd77cba191c..8067793129ea 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -80,3 +80,61 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ /* PCIe slot 1 (x8) */
+ status = "okay";
+};
+
+&i2c7 {
+ /* PCIe slot 2 (x16) */
+ status = "okay";
+};
+
+&i2c8 {
+ /* PCIe slot 3 (x16) */
+ status = "okay";
+};
+
+&i2c9 {
+ /* PCIe slot 4 (x16) */
+ status = "okay";
+};
+
+&i2c10 {
+ /* PCIe slot 5 (x8) */
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fcc5efbd0879..45d815a86d42 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -8,6 +8,29 @@
#size-cells = <1>;
interrupt-parent = <&vic>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &vuart;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -110,7 +133,7 @@
clock-frequency = <192000000>;
};
- clk_apb: clk_apb@08 {
+ clk_apb: clk_apb@8 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock", "fixed-clock";
reg = <0x08>;
@@ -127,750 +150,17 @@
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
-
- pinctrl_acpi_default: acpi_default {
- function = "ACPI";
- groups = "ACPI";
- };
-
- pinctrl_adc0_default: adc0_default {
- function = "ADC0";
- groups = "ADC0";
- };
-
- pinctrl_adc1_default: adc1_default {
- function = "ADC1";
- groups = "ADC1";
- };
-
- pinctrl_adc10_default: adc10_default {
- function = "ADC10";
- groups = "ADC10";
- };
-
- pinctrl_adc11_default: adc11_default {
- function = "ADC11";
- groups = "ADC11";
- };
-
- pinctrl_adc12_default: adc12_default {
- function = "ADC12";
- groups = "ADC12";
- };
-
- pinctrl_adc13_default: adc13_default {
- function = "ADC13";
- groups = "ADC13";
- };
-
- pinctrl_adc14_default: adc14_default {
- function = "ADC14";
- groups = "ADC14";
- };
-
- pinctrl_adc15_default: adc15_default {
- function = "ADC15";
- groups = "ADC15";
- };
-
- pinctrl_adc2_default: adc2_default {
- function = "ADC2";
- groups = "ADC2";
- };
-
- pinctrl_adc3_default: adc3_default {
- function = "ADC3";
- groups = "ADC3";
- };
-
- pinctrl_adc4_default: adc4_default {
- function = "ADC4";
- groups = "ADC4";
- };
-
- pinctrl_adc5_default: adc5_default {
- function = "ADC5";
- groups = "ADC5";
- };
-
- pinctrl_adc6_default: adc6_default {
- function = "ADC6";
- groups = "ADC6";
- };
-
- pinctrl_adc7_default: adc7_default {
- function = "ADC7";
- groups = "ADC7";
- };
-
- pinctrl_adc8_default: adc8_default {
- function = "ADC8";
- groups = "ADC8";
- };
-
- pinctrl_adc9_default: adc9_default {
- function = "ADC9";
- groups = "ADC9";
- };
-
- pinctrl_bmcint_default: bmcint_default {
- function = "BMCINT";
- groups = "BMCINT";
- };
-
- pinctrl_ddcclk_default: ddcclk_default {
- function = "DDCCLK";
- groups = "DDCCLK";
- };
-
- pinctrl_ddcdat_default: ddcdat_default {
- function = "DDCDAT";
- groups = "DDCDAT";
- };
-
- pinctrl_extrst_default: extrst_default {
- function = "EXTRST";
- groups = "EXTRST";
- };
-
- pinctrl_flack_default: flack_default {
- function = "FLACK";
- groups = "FLACK";
- };
-
- pinctrl_flbusy_default: flbusy_default {
- function = "FLBUSY";
- groups = "FLBUSY";
- };
-
- pinctrl_flwp_default: flwp_default {
- function = "FLWP";
- groups = "FLWP";
- };
-
- pinctrl_gpid_default: gpid_default {
- function = "GPID";
- groups = "GPID";
- };
-
- pinctrl_gpid0_default: gpid0_default {
- function = "GPID0";
- groups = "GPID0";
- };
-
- pinctrl_gpid2_default: gpid2_default {
- function = "GPID2";
- groups = "GPID2";
- };
-
- pinctrl_gpid4_default: gpid4_default {
- function = "GPID4";
- groups = "GPID4";
- };
-
- pinctrl_gpid6_default: gpid6_default {
- function = "GPID6";
- groups = "GPID6";
- };
-
- pinctrl_gpie0_default: gpie0_default {
- function = "GPIE0";
- groups = "GPIE0";
- };
-
- pinctrl_gpie2_default: gpie2_default {
- function = "GPIE2";
- groups = "GPIE2";
- };
-
- pinctrl_gpie4_default: gpie4_default {
- function = "GPIE4";
- groups = "GPIE4";
- };
-
- pinctrl_gpie6_default: gpie6_default {
- function = "GPIE6";
- groups = "GPIE6";
- };
-
- pinctrl_i2c10_default: i2c10_default {
- function = "I2C10";
- groups = "I2C10";
- };
-
- pinctrl_i2c11_default: i2c11_default {
- function = "I2C11";
- groups = "I2C11";
- };
-
- pinctrl_i2c12_default: i2c12_default {
- function = "I2C12";
- groups = "I2C12";
- };
-
- pinctrl_i2c13_default: i2c13_default {
- function = "I2C13";
- groups = "I2C13";
- };
-
- pinctrl_i2c14_default: i2c14_default {
- function = "I2C14";
- groups = "I2C14";
- };
-
- pinctrl_i2c3_default: i2c3_default {
- function = "I2C3";
- groups = "I2C3";
- };
-
- pinctrl_i2c4_default: i2c4_default {
- function = "I2C4";
- groups = "I2C4";
- };
-
- pinctrl_i2c5_default: i2c5_default {
- function = "I2C5";
- groups = "I2C5";
- };
-
- pinctrl_i2c6_default: i2c6_default {
- function = "I2C6";
- groups = "I2C6";
- };
-
- pinctrl_i2c7_default: i2c7_default {
- function = "I2C7";
- groups = "I2C7";
- };
-
- pinctrl_i2c8_default: i2c8_default {
- function = "I2C8";
- groups = "I2C8";
- };
-
- pinctrl_i2c9_default: i2c9_default {
- function = "I2C9";
- groups = "I2C9";
- };
-
- pinctrl_lpcpd_default: lpcpd_default {
- function = "LPCPD";
- groups = "LPCPD";
- };
-
- pinctrl_lpcpme_default: lpcpme_default {
- function = "LPCPME";
- groups = "LPCPME";
- };
-
- pinctrl_lpcrst_default: lpcrst_default {
- function = "LPCRST";
- groups = "LPCRST";
- };
-
- pinctrl_lpcsmi_default: lpcsmi_default {
- function = "LPCSMI";
- groups = "LPCSMI";
- };
-
- pinctrl_mac1link_default: mac1link_default {
- function = "MAC1LINK";
- groups = "MAC1LINK";
- };
-
- pinctrl_mac2link_default: mac2link_default {
- function = "MAC2LINK";
- groups = "MAC2LINK";
- };
-
- pinctrl_mdio1_default: mdio1_default {
- function = "MDIO1";
- groups = "MDIO1";
- };
-
- pinctrl_mdio2_default: mdio2_default {
- function = "MDIO2";
- groups = "MDIO2";
- };
-
- pinctrl_ncts1_default: ncts1_default {
- function = "NCTS1";
- groups = "NCTS1";
- };
-
- pinctrl_ncts2_default: ncts2_default {
- function = "NCTS2";
- groups = "NCTS2";
- };
-
- pinctrl_ncts3_default: ncts3_default {
- function = "NCTS3";
- groups = "NCTS3";
- };
-
- pinctrl_ncts4_default: ncts4_default {
- function = "NCTS4";
- groups = "NCTS4";
- };
-
- pinctrl_ndcd1_default: ndcd1_default {
- function = "NDCD1";
- groups = "NDCD1";
- };
-
- pinctrl_ndcd2_default: ndcd2_default {
- function = "NDCD2";
- groups = "NDCD2";
- };
-
- pinctrl_ndcd3_default: ndcd3_default {
- function = "NDCD3";
- groups = "NDCD3";
- };
-
- pinctrl_ndcd4_default: ndcd4_default {
- function = "NDCD4";
- groups = "NDCD4";
- };
-
- pinctrl_ndsr1_default: ndsr1_default {
- function = "NDSR1";
- groups = "NDSR1";
- };
-
- pinctrl_ndsr2_default: ndsr2_default {
- function = "NDSR2";
- groups = "NDSR2";
- };
-
- pinctrl_ndsr3_default: ndsr3_default {
- function = "NDSR3";
- groups = "NDSR3";
- };
-
- pinctrl_ndsr4_default: ndsr4_default {
- function = "NDSR4";
- groups = "NDSR4";
- };
-
- pinctrl_ndtr1_default: ndtr1_default {
- function = "NDTR1";
- groups = "NDTR1";
- };
-
- pinctrl_ndtr2_default: ndtr2_default {
- function = "NDTR2";
- groups = "NDTR2";
- };
-
- pinctrl_ndtr3_default: ndtr3_default {
- function = "NDTR3";
- groups = "NDTR3";
- };
-
- pinctrl_ndtr4_default: ndtr4_default {
- function = "NDTR4";
- groups = "NDTR4";
- };
-
- pinctrl_ndts4_default: ndts4_default {
- function = "NDTS4";
- groups = "NDTS4";
- };
-
- pinctrl_nri1_default: nri1_default {
- function = "NRI1";
- groups = "NRI1";
- };
-
- pinctrl_nri2_default: nri2_default {
- function = "NRI2";
- groups = "NRI2";
- };
-
- pinctrl_nri3_default: nri3_default {
- function = "NRI3";
- groups = "NRI3";
- };
-
- pinctrl_nri4_default: nri4_default {
- function = "NRI4";
- groups = "NRI4";
- };
-
- pinctrl_nrts1_default: nrts1_default {
- function = "NRTS1";
- groups = "NRTS1";
- };
-
- pinctrl_nrts2_default: nrts2_default {
- function = "NRTS2";
- groups = "NRTS2";
- };
-
- pinctrl_nrts3_default: nrts3_default {
- function = "NRTS3";
- groups = "NRTS3";
- };
-
- pinctrl_oscclk_default: oscclk_default {
- function = "OSCCLK";
- groups = "OSCCLK";
- };
-
- pinctrl_pwm0_default: pwm0_default {
- function = "PWM0";
- groups = "PWM0";
- };
-
- pinctrl_pwm1_default: pwm1_default {
- function = "PWM1";
- groups = "PWM1";
- };
-
- pinctrl_pwm2_default: pwm2_default {
- function = "PWM2";
- groups = "PWM2";
- };
-
- pinctrl_pwm3_default: pwm3_default {
- function = "PWM3";
- groups = "PWM3";
- };
-
- pinctrl_pwm4_default: pwm4_default {
- function = "PWM4";
- groups = "PWM4";
- };
-
- pinctrl_pwm5_default: pwm5_default {
- function = "PWM5";
- groups = "PWM5";
- };
-
- pinctrl_pwm6_default: pwm6_default {
- function = "PWM6";
- groups = "PWM6";
- };
-
- pinctrl_pwm7_default: pwm7_default {
- function = "PWM7";
- groups = "PWM7";
- };
-
- pinctrl_rgmii1_default: rgmii1_default {
- function = "RGMII1";
- groups = "RGMII1";
- };
-
- pinctrl_rgmii2_default: rgmii2_default {
- function = "RGMII2";
- groups = "RGMII2";
- };
-
- pinctrl_rmii1_default: rmii1_default {
- function = "RMII1";
- groups = "RMII1";
- };
-
- pinctrl_rmii2_default: rmii2_default {
- function = "RMII2";
- groups = "RMII2";
- };
-
- pinctrl_rom16_default: rom16_default {
- function = "ROM16";
- groups = "ROM16";
- };
-
- pinctrl_rom8_default: rom8_default {
- function = "ROM8";
- groups = "ROM8";
- };
-
- pinctrl_romcs1_default: romcs1_default {
- function = "ROMCS1";
- groups = "ROMCS1";
- };
-
- pinctrl_romcs2_default: romcs2_default {
- function = "ROMCS2";
- groups = "ROMCS2";
- };
-
- pinctrl_romcs3_default: romcs3_default {
- function = "ROMCS3";
- groups = "ROMCS3";
- };
-
- pinctrl_romcs4_default: romcs4_default {
- function = "ROMCS4";
- groups = "ROMCS4";
- };
-
- pinctrl_rxd1_default: rxd1_default {
- function = "RXD1";
- groups = "RXD1";
- };
-
- pinctrl_rxd2_default: rxd2_default {
- function = "RXD2";
- groups = "RXD2";
- };
-
- pinctrl_rxd3_default: rxd3_default {
- function = "RXD3";
- groups = "RXD3";
- };
-
- pinctrl_rxd4_default: rxd4_default {
- function = "RXD4";
- groups = "RXD4";
- };
-
- pinctrl_salt1_default: salt1_default {
- function = "SALT1";
- groups = "SALT1";
- };
-
- pinctrl_salt2_default: salt2_default {
- function = "SALT2";
- groups = "SALT2";
- };
-
- pinctrl_salt3_default: salt3_default {
- function = "SALT3";
- groups = "SALT3";
- };
-
- pinctrl_salt4_default: salt4_default {
- function = "SALT4";
- groups = "SALT4";
- };
-
- pinctrl_sd1_default: sd1_default {
- function = "SD1";
- groups = "SD1";
- };
-
- pinctrl_sd2_default: sd2_default {
- function = "SD2";
- groups = "SD2";
- };
-
- pinctrl_sgpmck_default: sgpmck_default {
- function = "SGPMCK";
- groups = "SGPMCK";
- };
-
- pinctrl_sgpmi_default: sgpmi_default {
- function = "SGPMI";
- groups = "SGPMI";
- };
-
- pinctrl_sgpmld_default: sgpmld_default {
- function = "SGPMLD";
- groups = "SGPMLD";
- };
-
- pinctrl_sgpmo_default: sgpmo_default {
- function = "SGPMO";
- groups = "SGPMO";
- };
-
- pinctrl_sgpsck_default: sgpsck_default {
- function = "SGPSCK";
- groups = "SGPSCK";
- };
-
- pinctrl_sgpsi0_default: sgpsi0_default {
- function = "SGPSI0";
- groups = "SGPSI0";
- };
-
- pinctrl_sgpsi1_default: sgpsi1_default {
- function = "SGPSI1";
- groups = "SGPSI1";
- };
-
- pinctrl_sgpsld_default: sgpsld_default {
- function = "SGPSLD";
- groups = "SGPSLD";
- };
-
- pinctrl_sioonctrl_default: sioonctrl_default {
- function = "SIOONCTRL";
- groups = "SIOONCTRL";
- };
-
- pinctrl_siopbi_default: siopbi_default {
- function = "SIOPBI";
- groups = "SIOPBI";
- };
-
- pinctrl_siopbo_default: siopbo_default {
- function = "SIOPBO";
- groups = "SIOPBO";
- };
-
- pinctrl_siopwreq_default: siopwreq_default {
- function = "SIOPWREQ";
- groups = "SIOPWREQ";
- };
-
- pinctrl_siopwrgd_default: siopwrgd_default {
- function = "SIOPWRGD";
- groups = "SIOPWRGD";
- };
-
- pinctrl_sios3_default: sios3_default {
- function = "SIOS3";
- groups = "SIOS3";
- };
-
- pinctrl_sios5_default: sios5_default {
- function = "SIOS5";
- groups = "SIOS5";
- };
-
- pinctrl_siosci_default: siosci_default {
- function = "SIOSCI";
- groups = "SIOSCI";
- };
-
- pinctrl_spi1_default: spi1_default {
- function = "SPI1";
- groups = "SPI1";
- };
-
- pinctrl_spi1debug_default: spi1debug_default {
- function = "SPI1DEBUG";
- groups = "SPI1DEBUG";
- };
-
- pinctrl_spi1passthru_default: spi1passthru_default {
- function = "SPI1PASSTHRU";
- groups = "SPI1PASSTHRU";
- };
-
- pinctrl_spics1_default: spics1_default {
- function = "SPICS1";
- groups = "SPICS1";
- };
-
- pinctrl_timer3_default: timer3_default {
- function = "TIMER3";
- groups = "TIMER3";
- };
-
- pinctrl_timer4_default: timer4_default {
- function = "TIMER4";
- groups = "TIMER4";
- };
-
- pinctrl_timer5_default: timer5_default {
- function = "TIMER5";
- groups = "TIMER5";
- };
-
- pinctrl_timer6_default: timer6_default {
- function = "TIMER6";
- groups = "TIMER6";
- };
-
- pinctrl_timer7_default: timer7_default {
- function = "TIMER7";
- groups = "TIMER7";
- };
-
- pinctrl_timer8_default: timer8_default {
- function = "TIMER8";
- groups = "TIMER8";
- };
-
- pinctrl_txd1_default: txd1_default {
- function = "TXD1";
- groups = "TXD1";
- };
-
- pinctrl_txd2_default: txd2_default {
- function = "TXD2";
- groups = "TXD2";
- };
-
- pinctrl_txd3_default: txd3_default {
- function = "TXD3";
- groups = "TXD3";
- };
-
- pinctrl_txd4_default: txd4_default {
- function = "TXD4";
- groups = "TXD4";
- };
-
- pinctrl_uart6_default: uart6_default {
- function = "UART6";
- groups = "UART6";
- };
-
- pinctrl_usbcki_default: usbcki_default {
- function = "USBCKI";
- groups = "USBCKI";
- };
-
- pinctrl_vgabios_rom_default: vgabios_rom_default {
- function = "VGABIOS_ROM";
- groups = "VGABIOS_ROM";
- };
-
- pinctrl_vgahs_default: vgahs_default {
- function = "VGAHS";
- groups = "VGAHS";
- };
-
- pinctrl_vgavs_default: vgavs_default {
- function = "VGAVS";
- groups = "VGAVS";
- };
-
- pinctrl_vpi18_default: vpi18_default {
- function = "VPI18";
- groups = "VPI18";
- };
-
- pinctrl_vpi24_default: vpi24_default {
- function = "VPI24";
- groups = "VPI24";
- };
-
- pinctrl_vpi30_default: vpi30_default {
- function = "VPI30";
- groups = "VPI30";
- };
-
- pinctrl_vpo12_default: vpo12_default {
- function = "VPO12";
- groups = "VPO12";
- };
-
- pinctrl_vpo24_default: vpo24_default {
- function = "VPO24";
- groups = "VPO24";
- };
-
- pinctrl_wdtrst1_default: wdtrst1_default {
- function = "WDTRST1";
- groups = "WDTRST1";
- };
-
- pinctrl_wdtrst2_default: wdtrst2_default {
- function = "WDTRST2";
- groups = "WDTRST2";
- };
-
};
};
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2400-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
@@ -895,23 +185,9 @@
clock-names = "PCLK";
};
- wdt1: wdt@1e785000 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785000 0x1c>;
- interrupts = <27>;
- };
-
- wdt2: wdt@1e785020 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785020 0x1c>;
- interrupts = <27>;
- clocks = <&clk_apb>;
- status = "disabled";
- };
-
uart1: serial@1e783000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
@@ -919,64 +195,1046 @@
status = "disabled";
};
- uart2: serial@1e78d000 {
+ uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
- interrupts = <32>;
+ interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart3: serial@1e78e000 {
- compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785000 0x1c>;
+ };
+
+ wdt2: watchdog@1e785020 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785020 0x1c>;
+ };
+
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2400-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <33>;
+ interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart4: serial@1e78f000 {
+ uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
- interrupts = <34>;
+ interrupts = <32>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart5: serial@1e784000 {
+ uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <33>;
clocks = <&clk_uart>;
- current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
- uart6: serial@1e787000 {
+ uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <34>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- adc: adc@1e6e9000 {
- compatible = "aspeed,ast2400-adc";
- reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
- #io-channel-cells = <1>;
- status = "disabled";
+ i2c: i2c@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
};
};
};
};
+
+&i2c {
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
+
+ i2c1: i2c-bus@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <1>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
+
+ i2c2: i2c-bus@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0xc0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <2>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ status = "disabled";
+ };
+
+ i2c3: i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x100 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <3>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ status = "disabled";
+ };
+
+ i2c4: i2c-bus@140 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x140 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <4>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ status = "disabled";
+ };
+
+ i2c5: i2c-bus@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x180 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <5>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+ status = "disabled";
+ };
+
+ i2c6: i2c-bus@1c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x1c0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <6>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+ status = "disabled";
+ };
+
+ i2c7: i2c-bus@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x300 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <7>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+ status = "disabled";
+ };
+
+ i2c8: i2c-bus@340 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x340 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <8>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+ status = "disabled";
+ };
+
+ i2c9: i2c-bus@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x380 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <9>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ status = "disabled";
+ };
+
+ i2c10: i2c-bus@3c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x3c0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <10>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ status = "disabled";
+ };
+
+ i2c11: i2c-bus@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x400 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <11>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
+ status = "disabled";
+ };
+
+ i2c12: i2c-bus@440 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x440 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <12>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
+ status = "disabled";
+ };
+
+ i2c13: i2c-bus@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x480 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <13>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
+ status = "disabled";
+ };
+};
+
+&pinctrl {
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_extrst_default: extrst_default {
+ function = "EXTRST";
+ groups = "EXTRST";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid_default: gpid_default {
+ function = "GPID";
+ groups = "GPID";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_ndts4_default: ndts4_default {
+ function = "NDTS4";
+ groups = "NDTS4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sgpmck_default: sgpmck_default {
+ function = "SGPMCK";
+ groups = "SGPMCK";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_sgpmld_default: sgpmld_default {
+ function = "SGPMLD";
+ groups = "SGPMLD";
+ };
+
+ pinctrl_sgpmo_default: sgpmo_default {
+ function = "SGPMO";
+ groups = "SGPMO";
+ };
+
+ pinctrl_sgpsck_default: sgpsck_default {
+ function = "SGPSCK";
+ groups = "SGPSCK";
+ };
+
+ pinctrl_sgpsi0_default: sgpsi0_default {
+ function = "SGPSI0";
+ groups = "SGPSI0";
+ };
+
+ pinctrl_sgpsi1_default: sgpsi1_default {
+ function = "SGPSI1";
+ groups = "SGPSI1";
+ };
+
+ pinctrl_sgpsld_default: sgpsld_default {
+ function = "SGPSLD";
+ groups = "SGPSLD";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spics1_default: spics1_default {
+ function = "SPICS1";
+ groups = "SPICS1";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabios_rom_default: vgabios_rom_default {
+ function = "VGABIOS_ROM";
+ groups = "VGABIOS_ROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index eab8f549a6fe..5c4ecdba3a6b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -8,6 +8,29 @@
#size-cells = <1>;
interrupt-parent = <&vic>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &vuart;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -145,7 +168,7 @@
clock-frequency = <198000000>;
};
- clk_apb: clk_apb@08 {
+ clk_apb: clk_apb@8 {
#clock-cells = <0>;
compatible = "aspeed,g5-apb-clock", "fixed-clock";
reg = <0x08>;
@@ -164,962 +187,1199 @@
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
- pinctrl_acpi_default: acpi_default {
- function = "ACPI";
- groups = "ACPI";
- };
+ };
- pinctrl_adc0_default: adc0_default {
- function = "ADC0";
- groups = "ADC0";
- };
+ };
- pinctrl_adc1_default: adc1_default {
- function = "ADC1";
- groups = "ADC1";
- };
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
- pinctrl_adc10_default: adc10_default {
- function = "ADC10";
- groups = "ADC10";
- };
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2500-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
- pinctrl_adc11_default: adc11_default {
- function = "ADC11";
- groups = "ADC11";
- };
+ sram@1e720000 {
+ compatible = "mmio-sram";
+ reg = <0x1e720000 0x9000>; // 36K
+ };
- pinctrl_adc12_default: adc12_default {
- function = "ADC12";
- groups = "ADC12";
- };
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2500-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
- pinctrl_adc13_default: adc13_default {
- function = "ADC13";
- groups = "ADC13";
- };
+ timer: timer@1e782000 {
+ /* This timer is a Faraday FTTMR010 derivative */
+ compatible = "aspeed,ast2400-timer";
+ reg = <0x1e782000 0x90>;
+ interrupts = <16 17 18 35 36 37 38 39>;
+ clocks = <&clk_apb>;
+ clock-names = "PCLK";
+ };
- pinctrl_adc14_default: adc14_default {
- function = "ADC14";
- groups = "ADC14";
- };
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x20>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_adc15_default: adc15_default {
- function = "ADC15";
- groups = "ADC15";
- };
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x20>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_adc2_default: adc2_default {
- function = "ADC2";
- groups = "ADC2";
- };
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785000 0x20>;
+ };
- pinctrl_adc3_default: adc3_default {
- function = "ADC3";
- groups = "ADC3";
- };
+ wdt2: watchdog@1e785020 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785020 0x20>;
+ };
- pinctrl_adc4_default: adc4_default {
- function = "ADC4";
- groups = "ADC4";
- };
+ wdt3: watchdog@1e785040 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785040 0x20>;
+ status = "disabled";
+ };
- pinctrl_adc5_default: adc5_default {
- function = "ADC5";
- groups = "ADC5";
- };
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
- pinctrl_adc6_default: adc6_default {
- function = "ADC6";
- groups = "ADC6";
- };
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e789000 0x1000>;
- pinctrl_adc7_default: adc7_default {
- function = "ADC7";
- groups = "ADC7";
- };
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
- pinctrl_adc8_default: adc8_default {
- function = "ADC8";
- groups = "ADC8";
- };
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
- pinctrl_adc9_default: adc9_default {
- function = "ADC9";
- groups = "ADC9";
- };
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80 0x1e0>;
- pinctrl_bmcint_default: bmcint_default {
- function = "BMCINT";
- groups = "BMCINT";
- };
+ reg-io-width = <4>;
- pinctrl_ddcclk_default: ddcclk_default {
- function = "DDCCLK";
- groups = "DDCCLK";
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
};
+ };
+ };
- pinctrl_ddcdat_default: ddcdat_default {
- function = "DDCDAT";
- groups = "DDCDAT";
- };
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_espi_default: espi_default {
- function = "ESPI";
- groups = "ESPI";
- };
+ uart2: serial@1e78d000 {
+ compatible = "ns16550a";
+ reg = <0x1e78d000 0x20>;
+ reg-shift = <2>;
+ interrupts = <32>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_fwspics1_default: fwspics1_default {
- function = "FWSPICS1";
- groups = "FWSPICS1";
- };
+ uart3: serial@1e78e000 {
+ compatible = "ns16550a";
+ reg = <0x1e78e000 0x20>;
+ reg-shift = <2>;
+ interrupts = <33>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_fwspics2_default: fwspics2_default {
- function = "FWSPICS2";
- groups = "FWSPICS2";
- };
+ uart4: serial@1e78f000 {
+ compatible = "ns16550a";
+ reg = <0x1e78f000 0x20>;
+ reg-shift = <2>;
+ interrupts = <34>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_gpid0_default: gpid0_default {
- function = "GPID0";
- groups = "GPID0";
- };
+ i2c: i2c@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+ };
+ };
+ };
+};
- pinctrl_gpid2_default: gpid2_default {
- function = "GPID2";
- groups = "GPID2";
- };
+&i2c {
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2500-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
- pinctrl_gpid4_default: gpid4_default {
- function = "GPID4";
- groups = "GPID4";
- };
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
- pinctrl_gpid6_default: gpid6_default {
- function = "GPID6";
- groups = "GPID6";
- };
+ i2c1: i2c-bus@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <1>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
- pinctrl_gpie0_default: gpie0_default {
- function = "GPIE0";
- groups = "GPIE0";
- };
+ i2c2: i2c-bus@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0xc0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <2>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ status = "disabled";
+ };
- pinctrl_gpie2_default: gpie2_default {
- function = "GPIE2";
- groups = "GPIE2";
- };
+ i2c3: i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x100 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <3>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ status = "disabled";
+ };
- pinctrl_gpie4_default: gpie4_default {
- function = "GPIE4";
- groups = "GPIE4";
- };
+ i2c4: i2c-bus@140 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x140 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <4>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ status = "disabled";
+ };
- pinctrl_gpie6_default: gpie6_default {
- function = "GPIE6";
- groups = "GPIE6";
- };
+ i2c5: i2c-bus@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x180 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <5>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+ status = "disabled";
+ };
- pinctrl_i2c10_default: i2c10_default {
- function = "I2C10";
- groups = "I2C10";
- };
+ i2c6: i2c-bus@1c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x1c0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <6>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+ status = "disabled";
+ };
- pinctrl_i2c11_default: i2c11_default {
- function = "I2C11";
- groups = "I2C11";
- };
+ i2c7: i2c-bus@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x300 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <7>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+ status = "disabled";
+ };
- pinctrl_i2c12_default: i2c12_default {
- function = "I2C12";
- groups = "I2C12";
- };
+ i2c8: i2c-bus@340 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x340 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <8>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+ status = "disabled";
+ };
- pinctrl_i2c13_default: i2c13_default {
- function = "I2C13";
- groups = "I2C13";
- };
+ i2c9: i2c-bus@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x380 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <9>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ status = "disabled";
+ };
- pinctrl_i2c14_default: i2c14_default {
- function = "I2C14";
- groups = "I2C14";
- };
+ i2c10: i2c-bus@3c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x3c0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <10>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ status = "disabled";
+ };
- pinctrl_i2c3_default: i2c3_default {
- function = "I2C3";
- groups = "I2C3";
- };
+ i2c11: i2c-bus@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x400 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <11>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
+ status = "disabled";
+ };
- pinctrl_i2c4_default: i2c4_default {
- function = "I2C4";
- groups = "I2C4";
- };
+ i2c12: i2c-bus@440 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x440 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <12>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
+ status = "disabled";
+ };
- pinctrl_i2c5_default: i2c5_default {
- function = "I2C5";
- groups = "I2C5";
- };
+ i2c13: i2c-bus@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x480 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <13>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
+ status = "disabled";
+ };
+};
- pinctrl_i2c6_default: i2c6_default {
- function = "I2C6";
- groups = "I2C6";
- };
+&pinctrl {
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
- pinctrl_i2c7_default: i2c7_default {
- function = "I2C7";
- groups = "I2C7";
- };
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
- pinctrl_i2c8_default: i2c8_default {
- function = "I2C8";
- groups = "I2C8";
- };
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
- pinctrl_i2c9_default: i2c9_default {
- function = "I2C9";
- groups = "I2C9";
- };
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
- pinctrl_lad0_default: lad0_default {
- function = "LAD0";
- groups = "LAD0";
- };
- pinctrl_lad1_default: lad1_default {
- function = "LAD1";
- groups = "LAD1";
- };
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
- pinctrl_lad2_default: lad2_default {
- function = "LAD2";
- groups = "LAD2";
- };
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
- pinctrl_lad3_default: lad3_default {
- function = "LAD3";
- groups = "LAD3";
- };
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
- pinctrl_lclk_default: lclk_default {
- function = "LCLK";
- groups = "LCLK";
- };
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
- pinctrl_lframe_default: lframe_default {
- function = "LFRAME";
- groups = "LFRAME";
- };
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
- pinctrl_lpchc_default: lpchc_default {
- function = "LPCHC";
- groups = "LPCHC";
- };
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
- pinctrl_lpcpd_default: lpcpd_default {
- function = "LPCPD";
- groups = "LPCPD";
- };
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
- pinctrl_lpcplus_default: lpcplus_default {
- function = "LPCPLUS";
- groups = "LPCPLUS";
- };
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
- pinctrl_lpcpme_default: lpcpme_default {
- function = "LPCPME";
- groups = "LPCPME";
- };
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
- pinctrl_lpcrst_default: lpcrst_default {
- function = "LPCRST";
- groups = "LPCRST";
- };
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
- pinctrl_lpcsmi_default: lpcsmi_default {
- function = "LPCSMI";
- groups = "LPCSMI";
- };
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
- pinctrl_lsirq_default: lsirq_default {
- function = "LSIRQ";
- groups = "LSIRQ";
- };
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
- pinctrl_mac1link_default: mac1link_default {
- function = "MAC1LINK";
- groups = "MAC1LINK";
- };
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
- pinctrl_mac2link_default: mac2link_default {
- function = "MAC2LINK";
- groups = "MAC2LINK";
- };
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
- pinctrl_mdio1_default: mdio1_default {
- function = "MDIO1";
- groups = "MDIO1";
- };
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
- pinctrl_mdio2_default: mdio2_default {
- function = "MDIO2";
- groups = "MDIO2";
- };
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
- pinctrl_ncts1_default: ncts1_default {
- function = "NCTS1";
- groups = "NCTS1";
- };
+ pinctrl_espi_default: espi_default {
+ function = "ESPI";
+ groups = "ESPI";
+ };
- pinctrl_ncts2_default: ncts2_default {
- function = "NCTS2";
- groups = "NCTS2";
- };
+ pinctrl_fwspics1_default: fwspics1_default {
+ function = "FWSPICS1";
+ groups = "FWSPICS1";
+ };
- pinctrl_ncts3_default: ncts3_default {
- function = "NCTS3";
- groups = "NCTS3";
- };
+ pinctrl_fwspics2_default: fwspics2_default {
+ function = "FWSPICS2";
+ groups = "FWSPICS2";
+ };
- pinctrl_ncts4_default: ncts4_default {
- function = "NCTS4";
- groups = "NCTS4";
- };
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
- pinctrl_ndcd1_default: ndcd1_default {
- function = "NDCD1";
- groups = "NDCD1";
- };
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
- pinctrl_ndcd2_default: ndcd2_default {
- function = "NDCD2";
- groups = "NDCD2";
- };
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
- pinctrl_ndcd3_default: ndcd3_default {
- function = "NDCD3";
- groups = "NDCD3";
- };
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
- pinctrl_ndcd4_default: ndcd4_default {
- function = "NDCD4";
- groups = "NDCD4";
- };
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
- pinctrl_ndsr1_default: ndsr1_default {
- function = "NDSR1";
- groups = "NDSR1";
- };
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
- pinctrl_ndsr2_default: ndsr2_default {
- function = "NDSR2";
- groups = "NDSR2";
- };
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
- pinctrl_ndsr3_default: ndsr3_default {
- function = "NDSR3";
- groups = "NDSR3";
- };
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
- pinctrl_ndsr4_default: ndsr4_default {
- function = "NDSR4";
- groups = "NDSR4";
- };
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
- pinctrl_ndtr1_default: ndtr1_default {
- function = "NDTR1";
- groups = "NDTR1";
- };
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
- pinctrl_ndtr2_default: ndtr2_default {
- function = "NDTR2";
- groups = "NDTR2";
- };
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
- pinctrl_ndtr3_default: ndtr3_default {
- function = "NDTR3";
- groups = "NDTR3";
- };
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
- pinctrl_ndtr4_default: ndtr4_default {
- function = "NDTR4";
- groups = "NDTR4";
- };
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
- pinctrl_nri1_default: nri1_default {
- function = "NRI1";
- groups = "NRI1";
- };
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
- pinctrl_nri2_default: nri2_default {
- function = "NRI2";
- groups = "NRI2";
- };
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
- pinctrl_nri3_default: nri3_default {
- function = "NRI3";
- groups = "NRI3";
- };
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
- pinctrl_nri4_default: nri4_default {
- function = "NRI4";
- groups = "NRI4";
- };
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
- pinctrl_nrts1_default: nrts1_default {
- function = "NRTS1";
- groups = "NRTS1";
- };
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
- pinctrl_nrts2_default: nrts2_default {
- function = "NRTS2";
- groups = "NRTS2";
- };
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
- pinctrl_nrts3_default: nrts3_default {
- function = "NRTS3";
- groups = "NRTS3";
- };
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
- pinctrl_nrts4_default: nrts4_default {
- function = "NRTS4";
- groups = "NRTS4";
- };
+ pinctrl_lad0_default: lad0_default {
+ function = "LAD0";
+ groups = "LAD0";
+ };
- pinctrl_oscclk_default: oscclk_default {
- function = "OSCCLK";
- groups = "OSCCLK";
- };
+ pinctrl_lad1_default: lad1_default {
+ function = "LAD1";
+ groups = "LAD1";
+ };
- pinctrl_pewake_default: pewake_default {
- function = "PEWAKE";
- groups = "PEWAKE";
- };
+ pinctrl_lad2_default: lad2_default {
+ function = "LAD2";
+ groups = "LAD2";
+ };
- pinctrl_pnor_default: pnor_default {
- function = "PNOR";
- groups = "PNOR";
- };
+ pinctrl_lad3_default: lad3_default {
+ function = "LAD3";
+ groups = "LAD3";
+ };
- pinctrl_pwm0_default: pwm0_default {
- function = "PWM0";
- groups = "PWM0";
- };
+ pinctrl_lclk_default: lclk_default {
+ function = "LCLK";
+ groups = "LCLK";
+ };
- pinctrl_pwm1_default: pwm1_default {
- function = "PWM1";
- groups = "PWM1";
- };
+ pinctrl_lframe_default: lframe_default {
+ function = "LFRAME";
+ groups = "LFRAME";
+ };
- pinctrl_pwm2_default: pwm2_default {
- function = "PWM2";
- groups = "PWM2";
- };
+ pinctrl_lpchc_default: lpchc_default {
+ function = "LPCHC";
+ groups = "LPCHC";
+ };
- pinctrl_pwm3_default: pwm3_default {
- function = "PWM3";
- groups = "PWM3";
- };
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
- pinctrl_pwm4_default: pwm4_default {
- function = "PWM4";
- groups = "PWM4";
- };
+ pinctrl_lpcplus_default: lpcplus_default {
+ function = "LPCPLUS";
+ groups = "LPCPLUS";
+ };
- pinctrl_pwm5_default: pwm5_default {
- function = "PWM5";
- groups = "PWM5";
- };
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
- pinctrl_pwm6_default: pwm6_default {
- function = "PWM6";
- groups = "PWM6";
- };
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
- pinctrl_pwm7_default: pwm7_default {
- function = "PWM7";
- groups = "PWM7";
- };
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
- pinctrl_rgmii1_default: rgmii1_default {
- function = "RGMII1";
- groups = "RGMII1";
- };
+ pinctrl_lsirq_default: lsirq_default {
+ function = "LSIRQ";
+ groups = "LSIRQ";
+ };
- pinctrl_rgmii2_default: rgmii2_default {
- function = "RGMII2";
- groups = "RGMII2";
- };
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
- pinctrl_rmii1_default: rmii1_default {
- function = "RMII1";
- groups = "RMII1";
- };
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
- pinctrl_rmii2_default: rmii2_default {
- function = "RMII2";
- groups = "RMII2";
- };
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
- pinctrl_rxd1_default: rxd1_default {
- function = "RXD1";
- groups = "RXD1";
- };
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
- pinctrl_rxd2_default: rxd2_default {
- function = "RXD2";
- groups = "RXD2";
- };
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
- pinctrl_rxd3_default: rxd3_default {
- function = "RXD3";
- groups = "RXD3";
- };
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
- pinctrl_rxd4_default: rxd4_default {
- function = "RXD4";
- groups = "RXD4";
- };
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
- pinctrl_salt1_default: salt1_default {
- function = "SALT1";
- groups = "SALT1";
- };
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
- pinctrl_salt10_default: salt10_default {
- function = "SALT10";
- groups = "SALT10";
- };
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
- pinctrl_salt11_default: salt11_default {
- function = "SALT11";
- groups = "SALT11";
- };
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
- pinctrl_salt12_default: salt12_default {
- function = "SALT12";
- groups = "SALT12";
- };
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
- pinctrl_salt13_default: salt13_default {
- function = "SALT13";
- groups = "SALT13";
- };
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
- pinctrl_salt14_default: salt14_default {
- function = "SALT14";
- groups = "SALT14";
- };
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
- pinctrl_salt2_default: salt2_default {
- function = "SALT2";
- groups = "SALT2";
- };
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
- pinctrl_salt3_default: salt3_default {
- function = "SALT3";
- groups = "SALT3";
- };
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
- pinctrl_salt4_default: salt4_default {
- function = "SALT4";
- groups = "SALT4";
- };
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
- pinctrl_salt5_default: salt5_default {
- function = "SALT5";
- groups = "SALT5";
- };
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
- pinctrl_salt6_default: salt6_default {
- function = "SALT6";
- groups = "SALT6";
- };
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
- pinctrl_salt7_default: salt7_default {
- function = "SALT7";
- groups = "SALT7";
- };
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
- pinctrl_salt8_default: salt8_default {
- function = "SALT8";
- groups = "SALT8";
- };
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
- pinctrl_salt9_default: salt9_default {
- function = "SALT9";
- groups = "SALT9";
- };
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
- pinctrl_scl1_default: scl1_default {
- function = "SCL1";
- groups = "SCL1";
- };
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
- pinctrl_scl2_default: scl2_default {
- function = "SCL2";
- groups = "SCL2";
- };
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
- pinctrl_sd1_default: sd1_default {
- function = "SD1";
- groups = "SD1";
- };
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
- pinctrl_sd2_default: sd2_default {
- function = "SD2";
- groups = "SD2";
- };
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
- pinctrl_sda1_default: sda1_default {
- function = "SDA1";
- groups = "SDA1";
- };
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
- pinctrl_sda2_default: sda2_default {
- function = "SDA2";
- groups = "SDA2";
- };
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
- pinctrl_sgps1_default: sgps1_default {
- function = "SGPS1";
- groups = "SGPS1";
- };
+ pinctrl_nrts4_default: nrts4_default {
+ function = "NRTS4";
+ groups = "NRTS4";
+ };
- pinctrl_sgps2_default: sgps2_default {
- function = "SGPS2";
- groups = "SGPS2";
- };
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
- pinctrl_sioonctrl_default: sioonctrl_default {
- function = "SIOONCTRL";
- groups = "SIOONCTRL";
- };
+ pinctrl_pewake_default: pewake_default {
+ function = "PEWAKE";
+ groups = "PEWAKE";
+ };
- pinctrl_siopbi_default: siopbi_default {
- function = "SIOPBI";
- groups = "SIOPBI";
- };
+ pinctrl_pnor_default: pnor_default {
+ function = "PNOR";
+ groups = "PNOR";
+ };
- pinctrl_siopbo_default: siopbo_default {
- function = "SIOPBO";
- groups = "SIOPBO";
- };
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
- pinctrl_siopwreq_default: siopwreq_default {
- function = "SIOPWREQ";
- groups = "SIOPWREQ";
- };
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
- pinctrl_siopwrgd_default: siopwrgd_default {
- function = "SIOPWRGD";
- groups = "SIOPWRGD";
- };
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
- pinctrl_sios3_default: sios3_default {
- function = "SIOS3";
- groups = "SIOS3";
- };
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
- pinctrl_sios5_default: sios5_default {
- function = "SIOS5";
- groups = "SIOS5";
- };
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
- pinctrl_siosci_default: siosci_default {
- function = "SIOSCI";
- groups = "SIOSCI";
- };
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
- pinctrl_spi1_default: spi1_default {
- function = "SPI1";
- groups = "SPI1";
- };
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
- pinctrl_spi1cs1_default: spi1cs1_default {
- function = "SPI1CS1";
- groups = "SPI1CS1";
- };
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
- pinctrl_spi1debug_default: spi1debug_default {
- function = "SPI1DEBUG";
- groups = "SPI1DEBUG";
- };
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
- pinctrl_spi1passthru_default: spi1passthru_default {
- function = "SPI1PASSTHRU";
- groups = "SPI1PASSTHRU";
- };
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
- pinctrl_spi2ck_default: spi2ck_default {
- function = "SPI2CK";
- groups = "SPI2CK";
- };
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
- pinctrl_spi2cs0_default: spi2cs0_default {
- function = "SPI2CS0";
- groups = "SPI2CS0";
- };
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
- pinctrl_spi2cs1_default: spi2cs1_default {
- function = "SPI2CS1";
- groups = "SPI2CS1";
- };
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
- pinctrl_spi2miso_default: spi2miso_default {
- function = "SPI2MISO";
- groups = "SPI2MISO";
- };
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
- pinctrl_spi2mosi_default: spi2mosi_default {
- function = "SPI2MOSI";
- groups = "SPI2MOSI";
- };
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
- pinctrl_timer3_default: timer3_default {
- function = "TIMER3";
- groups = "TIMER3";
- };
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
- pinctrl_timer4_default: timer4_default {
- function = "TIMER4";
- groups = "TIMER4";
- };
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
- pinctrl_timer5_default: timer5_default {
- function = "TIMER5";
- groups = "TIMER5";
- };
+ pinctrl_salt10_default: salt10_default {
+ function = "SALT10";
+ groups = "SALT10";
+ };
- pinctrl_timer6_default: timer6_default {
- function = "TIMER6";
- groups = "TIMER6";
- };
+ pinctrl_salt11_default: salt11_default {
+ function = "SALT11";
+ groups = "SALT11";
+ };
- pinctrl_timer7_default: timer7_default {
- function = "TIMER7";
- groups = "TIMER7";
- };
+ pinctrl_salt12_default: salt12_default {
+ function = "SALT12";
+ groups = "SALT12";
+ };
- pinctrl_timer8_default: timer8_default {
- function = "TIMER8";
- groups = "TIMER8";
- };
+ pinctrl_salt13_default: salt13_default {
+ function = "SALT13";
+ groups = "SALT13";
+ };
- pinctrl_txd1_default: txd1_default {
- function = "TXD1";
- groups = "TXD1";
- };
+ pinctrl_salt14_default: salt14_default {
+ function = "SALT14";
+ groups = "SALT14";
+ };
- pinctrl_txd2_default: txd2_default {
- function = "TXD2";
- groups = "TXD2";
- };
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
- pinctrl_txd3_default: txd3_default {
- function = "TXD3";
- groups = "TXD3";
- };
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
- pinctrl_txd4_default: txd4_default {
- function = "TXD4";
- groups = "TXD4";
- };
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
- pinctrl_uart6_default: uart6_default {
- function = "UART6";
- groups = "UART6";
- };
+ pinctrl_salt5_default: salt5_default {
+ function = "SALT5";
+ groups = "SALT5";
+ };
- pinctrl_usbcki_default: usbcki_default {
- function = "USBCKI";
- groups = "USBCKI";
- };
+ pinctrl_salt6_default: salt6_default {
+ function = "SALT6";
+ groups = "SALT6";
+ };
- pinctrl_vgabiosrom_default: vgabiosrom_default {
- function = "VGABIOSROM";
- groups = "VGABIOSROM";
- };
+ pinctrl_salt7_default: salt7_default {
+ function = "SALT7";
+ groups = "SALT7";
+ };
- pinctrl_vgahs_default: vgahs_default {
- function = "VGAHS";
- groups = "VGAHS";
- };
+ pinctrl_salt8_default: salt8_default {
+ function = "SALT8";
+ groups = "SALT8";
+ };
- pinctrl_vgavs_default: vgavs_default {
- function = "VGAVS";
- groups = "VGAVS";
- };
+ pinctrl_salt9_default: salt9_default {
+ function = "SALT9";
+ groups = "SALT9";
+ };
- pinctrl_vpi24_default: vpi24_default {
- function = "VPI24";
- groups = "VPI24";
- };
+ pinctrl_scl1_default: scl1_default {
+ function = "SCL1";
+ groups = "SCL1";
+ };
- pinctrl_vpo_default: vpo_default {
- function = "VPO";
- groups = "VPO";
- };
+ pinctrl_scl2_default: scl2_default {
+ function = "SCL2";
+ groups = "SCL2";
+ };
- pinctrl_wdtrst1_default: wdtrst1_default {
- function = "WDTRST1";
- groups = "WDTRST1";
- };
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
- pinctrl_wdtrst2_default: wdtrst2_default {
- function = "WDTRST2";
- groups = "WDTRST2";
- };
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
- };
+ pinctrl_sda1_default: sda1_default {
+ function = "SDA1";
+ groups = "SDA1";
+ };
- };
+ pinctrl_sda2_default: sda2_default {
+ function = "SDA2";
+ groups = "SDA2";
+ };
- gfx: display@1e6e6000 {
- compatible = "aspeed,ast2500-gfx", "syscon";
- reg = <0x1e6e6000 0x1000>;
- reg-io-width = <4>;
- };
+ pinctrl_sgps1_default: sgps1_default {
+ function = "SGPS1";
+ groups = "SGPS1";
+ };
- sram@1e720000 {
- compatible = "mmio-sram";
- reg = <0x1e720000 0x9000>; // 36K
- };
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
- gpio: gpio@1e780000 {
- #gpio-cells = <2>;
- gpio-controller;
- compatible = "aspeed,ast2500-gpio";
- reg = <0x1e780000 0x1000>;
- interrupts = <20>;
- gpio-ranges = <&pinctrl 0 0 220>;
- interrupt-controller;
- };
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
- timer: timer@1e782000 {
- /* This timer is a Faraday FTTMR010 derivative */
- compatible = "aspeed,ast2400-timer";
- reg = <0x1e782000 0x90>;
- interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
- clock-names = "PCLK";
- };
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
- wdt1: wdt@1e785000 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785000 0x20>;
- interrupts = <27>;
- };
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
- wdt2: wdt@1e785020 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785020 0x20>;
- interrupts = <27>;
- status = "disabled";
- };
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
- wdt3: wdt@1e785040 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785040 0x20>;
- status = "disabled";
- };
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
- uart1: serial@1e783000 {
- compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
- reg-shift = <2>;
- interrupts = <9>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
- lpc: lpc@1e789000 {
- compatible = "aspeed,ast2500-lpc", "simple-mfd";
- reg = <0x1e789000 0x1000>;
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e789000 0x1000>;
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
- lpc_bmc: lpc-bmc@0 {
- compatible = "aspeed,ast2500-lpc-bmc";
- reg = <0x0 0x80>;
- };
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
- lpc_host: lpc-host@80 {
- compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
- reg = <0x80 0x1e0>;
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x80 0x1e0>;
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
- reg-io-width = <4>;
+ pinctrl_spi2ck_default: spi2ck_default {
+ function = "SPI2CK";
+ groups = "SPI2CK";
+ };
- lhc: lhc@20 {
- compatible = "aspeed,ast2500-lhc";
- reg = <0x20 0x24 0x48 0x8>;
- };
- };
- };
+ pinctrl_spi2cs0_default: spi2cs0_default {
+ function = "SPI2CS0";
+ groups = "SPI2CS0";
+ };
- uart2: serial@1e78d000 {
- compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
- reg-shift = <2>;
- interrupts = <32>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
- uart3: serial@1e78e000 {
- compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
- reg-shift = <2>;
- interrupts = <33>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2miso_default: spi2miso_default {
+ function = "SPI2MISO";
+ groups = "SPI2MISO";
+ };
- uart4: serial@1e78f000 {
- compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
- reg-shift = <2>;
- interrupts = <34>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2mosi_default: spi2mosi_default {
+ function = "SPI2MOSI";
+ groups = "SPI2MOSI";
+ };
- uart5: serial@1e784000 {
- compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- current-speed = <38400>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
- adc: adc@1e6e9000 {
- compatible = "aspeed,ast2500-adc";
- reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
- #io-channel-cells = <1>;
- status = "disabled";
- };
- };
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabiosrom_default: vgabiosrom_default {
+ function = "VGABIOSROM";
+ groups = "VGABIOSROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpo_default: vpo_default {
+ function = "VPO";
+ groups = "VPO";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
};
};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index 4da011a7a698..1c86537a42a0 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -147,12 +147,12 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
index 21c5b56c92e0..f877f3430bcc 100644
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ b/arch/arm/boot/dts/at91-ariettag25.dts
@@ -59,12 +59,12 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index 27ebb0f722fd..c452654b843a 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -62,7 +62,7 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
@@ -71,7 +71,7 @@
>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index 4372c0287c1c..ec6c28c521a5 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -133,11 +133,11 @@
};
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
status = "okay";
};
- usb2: ehci@00700000 {
+ usb2: ehci@700000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 33238fcb6d0b..fe1bc0a59a98 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -59,12 +59,12 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
num-ports = <1>;
status = "okay";
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 60cb084a8d92..6d87b4eb6c41 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -53,19 +53,27 @@
model = "Atmel SAMA5D27 SOM1 EK";
compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+ aliases {
+ serial0 = &uart1; /* DBGU */
+ serial1 = &uart4; /* mikro BUS 1 */
+ serial2 = &uart2; /* mikro BUS 2 */
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
ahb {
- usb0: gadget@00300000 {
+ usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
&pioA PIN_PA27 GPIO_ACTIVE_HIGH
@@ -76,7 +84,7 @@
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
@@ -128,12 +136,14 @@
};
pwm0: pwm@f802c000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+ status = "disabled"; /* Conflict with leds. */
};
flx1: flexcom@f8038000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
- status = "disabled";
+ status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
@@ -147,7 +157,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "okay";
};
};
@@ -165,17 +175,12 @@
status = "okay";
};
- can0: can@f8054000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can0_default>;
- };
-
uart3: serial@fc008000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
uart4: serial@fc00c000 {
@@ -199,7 +204,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <32>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
spi2: spi@400 {
@@ -211,7 +216,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
};
@@ -228,7 +233,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <32>;
- status = "disabled";
+ status = "disabled"; /* Conflict with spi3 and i2c3. */
};
spi3: spi@400 {
@@ -240,7 +245,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
atmel,fifo-size = <16>;
- status = "okay";
+ status = "okay"; /* Conflict with uart6 and i2c3. */
};
i2c3: i2c@600 {
@@ -255,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "disabled"; /* Conflict with uart6 and spi3. */
};
};
@@ -268,12 +273,6 @@
pinctrl@fc038000 {
- pinctrl_can0_default: can0_default {
- pinmux = <PIN_PC10__CANTX0>,
- <PIN_PC11__CANRX0>;
- bias-disable;
- };
-
pinctrl_can1_default: can1_default {
pinmux = <PIN_PC26__CANTX1>,
<PIN_PC27__CANRX1>;
@@ -350,7 +349,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};
ck_cd_vddsel {
@@ -368,7 +367,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};
conf-ck_cd {
@@ -512,6 +511,7 @@
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
@@ -519,7 +519,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay";
+ status = "okay"; /* Conflict with pwm0. */
red {
label = "red";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index cbc26001247b..56de21de2779 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -67,14 +67,14 @@
};
ahb {
- usb0: gadget@00300000 {
+ usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
&pioA PIN_PB10 GPIO_ACTIVE_HIGH
@@ -85,7 +85,7 @@
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
@@ -103,6 +103,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
+ vqmmc-supply = <&vdd_3v3_reg>;
+ vmmc-supply = <&vdd_3v3_reg>;
};
apb {
@@ -160,14 +162,6 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
@@ -220,11 +214,28 @@
regulator-always-on;
};
};
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
};
};
pwm0: pwm@f802c000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+ status = "disabled"; /* conflict with leds */
};
flx0: flexcom@f8034000 {
@@ -449,7 +460,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};
ck_cd_rstn_vddsel {
@@ -468,7 +479,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};
conf-ck_cd {
@@ -508,6 +519,11 @@
bias-disable;
};
+ pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+ pinmux = <PIN_PB5__PWMH2>,
+ <PIN_PB6__PWML2>;
+ bias-pull-up;
+ };
};
classd: classd@fc048000 {
@@ -536,6 +552,7 @@
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
@@ -543,7 +560,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay";
+ status = "okay"; /* conflict with pwm0 */
red {
label = "red";
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 3af088d2cba7..40879aded680 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -235,14 +235,14 @@
};
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 3 GPIO_ACTIVE_LOW
@@ -251,7 +251,7 @@
status = "okay";
};
- usb2: ehci@00700000 {
+ usb2: ehci@700000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index 84be29f38dae..fe05aaa7ac87 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -21,14 +21,14 @@
};
ahb {
- usb0: gadget@00400000 {
+ usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00500000 {
+ usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_LOW
@@ -37,7 +37,7 @@
status = "okay";
};
- usb2: ehci@00600000 {
+ usb2: ehci@600000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index cf712444b2c2..29ab17a97f9a 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -170,14 +170,14 @@
};
};
- usb0: gadget@00400000 {
+ usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00500000 {
+ usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_HIGH
@@ -186,7 +186,7 @@
status = "okay";
};
- usb2: ehci@00600000 {
+ usb2: ehci@600000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index bae5248f126e..5b7ee92e32a7 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -216,14 +216,14 @@
};
};
- usb0: gadget@00400000 {
+ usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00500000 {
+ usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
&pioE 11 GPIO_ACTIVE_LOW
@@ -232,7 +232,7 @@
status = "okay";
};
- usb2: ehci@00600000 {
+ usb2: ehci@600000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index e0c0b2897a49..9f6005708ea8 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -180,14 +180,14 @@
};
};
- usb0: gadget@00400000 {
+ usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "disable";
};
- usb1: ohci@00500000 {
+ usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_LOW
@@ -196,7 +196,7 @@
status = "disable";
};
- usb2: ehci@00600000 {
+ usb2: ehci@600000 {
/* 4G Modem */
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index f057e0b15a6f..da622bf45b4a 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -66,7 +66,7 @@
};
};
- sram: sram@00200000 {
+ sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x4000>;
};
@@ -938,7 +938,7 @@
status = "disabled";
};
- usb0: ohci@00300000 {
+ usb0: ohci@300000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index f90e1c2d3caa..33192d0cefee 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -78,7 +78,7 @@
};
};
- usb0: ohci@00300000 {
+ usb0: ohci@300000 {
num-ports = <2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 6582f3cca929..bc655e7332d6 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -69,7 +69,7 @@
};
};
- sram0: sram@002ff000 {
+ sram0: sram@2ff000 {
compatible = "mmio-sram";
reg = <0x002ff000 0x2000>;
};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index a05353f96151..66876019101d 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -60,7 +60,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x28000>;
};
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges;
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 157e1493e6eb..960d6940ebf6 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -32,7 +32,7 @@
};
ahb {
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index ed4b564f8de5..e54f14d36b6f 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -62,12 +62,12 @@
};
};
- sram0: sram@00300000 {
+ sram0: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x14000>;
};
- sram1: sram@00500000 {
+ sram1: sram@500000 {
compatible = "mmio-sram";
reg = <0x00500000 0x4000>;
};
@@ -1010,7 +1010,7 @@
status = "disabled";
};
- usb0: ohci@00a00000 {
+ usb0: ohci@a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 10a0925da10e..5a2e1af793f5 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -191,7 +191,7 @@
};
};
- usb0: ohci@00a00000 {
+ usb0: ohci@a00000 {
num-ports = <2>;
status = "okay";
atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index f59301618163..90705ee6008b 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -16,11 +16,11 @@
reg = <0x20000000 0x08000000>;
};
- sram0: sram@002ff000 {
+ sram0: sram@2ff000 {
status = "disabled";
};
- sram1: sram@002fc000 {
+ sram1: sram@2fc000 {
compatible = "mmio-sram";
reg = <0x002fc000 0x8000>;
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 64fa3f9a39d3..2b127ca7aaa0 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -74,7 +74,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
};
@@ -1313,7 +1313,7 @@
status = "disabled";
};
- usb0: ohci@00700000 {
+ usb0: ohci@700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1322,7 +1322,7 @@
status = "disabled";
};
- usb1: ehci@00800000 {
+ usb1: ehci@800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 94c52c555f83..e922552a04cb 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -290,14 +290,14 @@
};
};
- usb0: ohci@00700000 {
+ usb0: ohci@700000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
&pioD 3 GPIO_ACTIVE_LOW>;
};
- usb1: ehci@00800000 {
+ usb1: ehci@800000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 06516d02d351..e0ac824e0785 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -64,7 +64,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
};
@@ -1018,7 +1018,7 @@
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 5bea8c59b115..212562aedf5e 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -169,7 +169,7 @@
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <1>;
atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 7768342a6638..52f0e9ef8f67 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -70,7 +70,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
};
@@ -81,7 +81,7 @@
#size-cells = <1>;
ranges;
- fb0: fb@00500000 {
+ fb0: fb@500000 {
compatible = "atmel,at91sam9rl-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 9047c168298a..ea6ed98960c9 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -32,7 +32,7 @@
};
ahb {
- fb0: fb@00500000 {
+ fb0: fb@500000 {
display = <&display0>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..f705a3165656 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -16,6 +16,10 @@
ahb {
apb {
+ can1: can@f8004000 {
+ status = "okay";
+ };
+
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
@@ -25,6 +29,12 @@
phy-mode = "rmii";
status = "okay";
};
+
+ pwm0: pwm@f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 57f307541d2e..ad779a7dfefd 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -72,7 +72,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
};
@@ -1231,7 +1231,7 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1240,7 +1240,7 @@
status = "disabled";
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 9d2bbc41a7b0..4a2e13c8bf00 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -50,6 +50,8 @@
};
usart0: serial@f801c000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
status = "okay";
};
@@ -134,7 +136,7 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
@@ -143,7 +145,7 @@
>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
index 0278f63b2daf..1304452f0fae 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/at91sam9xe.dtsi
@@ -49,11 +49,11 @@
model = "Atmel AT91SAM9XE family SoC";
compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
- sram0: sram@002ff000 {
+ sram0: sram@2ff000 {
status = "disabled";
};
- sram1: sram@00300000 {
+ sram1: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 3c8fa26e87b7..897103e0a79b 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -107,7 +107,7 @@
};
};
- usb_power_supply: usb_power_supply {
+ usb_power_supply: usb-power-supply {
compatible = "x-powers,axp202-usb-power-supply";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
new file mode 100644
index 000000000000..73b761f850c5
--- /dev/null
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ /* Default work frequency for buck regulators */
+ x-powers,dcdc-freq = <3000>;
+
+ reg_dcdc1: dcdc1 {
+ };
+
+ reg_dcdc2: dcdc2 {
+ };
+
+ reg_dcdc3: dcdc3 {
+ };
+
+ reg_dcdc4: dcdc4 {
+ };
+
+ reg_dcdc5: dcdc5 {
+ };
+
+ reg_dcdc6: dcdc6 {
+ };
+
+ reg_dcdc7: dcdc7 {
+ };
+
+ reg_aldo1: aldo1 {
+ };
+
+ reg_aldo2: aldo2 {
+ };
+
+ reg_aldo3: aldo3 {
+ };
+
+ reg_dldo1: dldo1 {
+ };
+
+ reg_dldo2: dldo2 {
+ };
+
+ reg_dldo3: dldo3 {
+ };
+
+ reg_dldo4: dldo4 {
+ };
+
+ reg_eldo1: eldo1 {
+ };
+
+ reg_eldo2: eldo2 {
+ };
+
+ reg_eldo3: eldo3 {
+ };
+
+ reg_fldo1: fldo1 {
+ };
+
+ reg_fldo2: fldo2 {
+ };
+
+ reg_fldo3: fldo3 {
+ };
+
+ reg_ldo_io0: ldo-io0 {
+ /* Disable by default to avoid conflicts with GPIO */
+ status = "disabled";
+ };
+
+ reg_ldo_io1: ldo-io1 {
+ /* Disable by default to avoid conflicts with GPIO */
+ status = "disabled";
+ };
+
+ reg_rtc_ldo: rtc-ldo {
+ /* RTC_LDO is a fixed, always-on regulator */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_sw: sw {
+ };
+
+ reg_drivevbus: drivevbus {
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 7c957ea06c66..699fdf94d139 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -96,14 +96,14 @@
#address-cells = <1>;
#size-cells = <1>;
- otp: otp@0301c800 {
+ otp: otp@301c800 {
compatible = "brcm,ocotp";
reg = <0x0301c800 0x2c>;
brcm,ocotp-size = <2048>;
status = "disabled";
};
- pcie_phy: phy@0301d0a0 {
+ pcie_phy: phy@301d0a0 {
compatible = "brcm,cygnus-pcie-phy";
reg = <0x0301d0a0 0x14>;
#address-cells = <1>;
@@ -120,7 +120,7 @@
};
};
- pinctrl: pinctrl@0301d0c8 {
+ pinctrl: pinctrl@301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
@@ -141,7 +141,7 @@
};
};
- mailbox: mailbox@03024024 {
+ mailbox: mailbox@3024024 {
compatible = "brcm,iproc-mailbox";
reg = <0x03024024 0x40>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -150,7 +150,7 @@
#mbox-cells = <1>;
};
- gpio_crmu: gpio@03024800 {
+ gpio_crmu: gpio@3024800 {
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
@@ -473,6 +473,16 @@
status = "disabled";
};
+ clcd: clcd@180a0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x180a0000 0x1000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+ clocks = <&axi41_clk>, <&apb_clk>;
+ clock-names = "clcdclk", "apb_pclk";
+ status = "disabled";
+ };
+
v3d: v3d@180a2000 {
compatible = "brcm,cygnus-v3d";
reg = <0x180a2000 0x1000>;
@@ -575,6 +585,14 @@
status = "disabled";
};
+ pwm: pwm@180aa500 {
+ compatible = "brcm,kona-pwm";
+ reg = <0x180aa500 0xc4>;
+ #pwm-cells = <3>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+ status = "disabled";
+ };
+
keypad: keypad@180ac000 {
compatible = "brcm,bcm-keypad";
reg = <0x180ac000 0x14c>;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
new file mode 100644
index 000000000000..3f9cedd8011f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,hr2";
+ model = "Broadcom Hurricane 2 SoC";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ };
+
+ mpcore@19000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ a9pll: arm_clk@0 {
+ #clock-cells = <0>;
+ compatible = "brcm,hr2-armpll";
+ clocks = <&osc>;
+ reg = <0x0 0x1000>;
+ };
+
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-watchdog@20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: l2-cache@22000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ };
+
+ axi@18000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x0011c40c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart1: serial@400 {
+ compatible = "ns16550a";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ dma@20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ amac0: ethernet@22000 {
+ compatible = "brcm,nsp-amac";
+ reg = <0x22000 0x1000>,
+ <0x110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ nand: nand@26000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x26000 0x600>,
+ <0x11b408 0x600>,
+ <0x026f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ gpiob: gpio@30000 {
+ compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+ reg = <0x30000 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpios = <4>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm: pwm@31000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x31000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rng: rng@33000 {
+ compatible = "brcm,bcm-nsp-rng";
+ reg = <0x33000 0x14>;
+ };
+
+ qspi: qspi@27200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ reg = <0x027200 0x184>,
+ <0x027000 0x124>,
+ <0x11c408 0x004>,
+ <0x0273a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overhead",
+ "mspi_done",
+ "mspi_halted";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* partitions defined in board DTS */
+ };
+
+ ccbtimer0: timer@34000 {
+ compatible = "arm,sp804";
+ reg = <0x34000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ccbtimer1: timer@35000 {
+ compatible = "arm,sp804";
+ reg = <0x35000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+
+ watchdog@39000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x39000 0x1000>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c1: i2c@3b000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x3b000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+ };
+
+ pflash: nor@20000000 {
+ compatible = "cfi-flash", "jedec-flash";
+ reg = <0x20000000 0x04000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* partitions defined in board DTS */
+ };
+
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+ status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi-controller {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
+ <GIC_SPI 183 IRQ_TYPE_NONE>,
+ <GIC_SPI 184 IRQ_TYPE_NONE>,
+ <GIC_SPI 185 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+ status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi-controller {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
+ <GIC_SPI 189 IRQ_TYPE_NONE>,
+ <GIC_SPI 190 IRQ_TYPE_NONE>,
+ <GIC_SPI 191 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index dff66974feed..528b9e3bc1da 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -75,7 +75,7 @@
#address-cells = <1>;
#size-cells = <1>;
- a9pll: arm_clk@00000 {
+ a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
clocks = <&osc>;
@@ -164,7 +164,7 @@
#address-cells = <1>;
#size-cells = <1>;
- gpioa: gpio@0020 {
+ gpioa: gpio@20 {
compatible = "brcm,nsp-gpio-a";
reg = <0x0020 0x70>,
<0x3f1c4 0x1c>;
@@ -176,7 +176,7 @@
gpio-ranges = <&pinctrl 0 0 32>;
};
- uart0: serial@0300 {
+ uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,7 +184,7 @@
status = "disabled";
};
- uart1: serial@0400 {
+ uart1: serial@400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index eb1a28da57e3..a8844d033b3f 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -30,6 +30,11 @@
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ };
};
/* uart1 is mapped to the pin header */
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index c544ab302012..ba1c19b1b3eb 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -57,7 +57,8 @@
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
status {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000000..ecd22a246746
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000000..15ffb1abc440
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XBR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000000..74c83b0ca54e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Luxul XAP-1440 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "bcm53xx:blue:wlan";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:green:system";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
new file mode 100644
index 000000000000..214df18f3a75
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Luxul XAP-810 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:green:system";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ pcie0_leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie0_chipcommon: chipcommon@0 {
+ reg = <0 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 045b9bb857f9..9a076c409f4e 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -24,7 +24,7 @@
#address-cells = <1>;
#size-cells = <1>;
- uart0: serial@0300 {
+ uart0: serial@300 {
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -32,7 +32,7 @@
status = "disabled";
};
- uart1: serial@0400 {
+ uart1: serial@400 {
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -47,7 +47,7 @@
#address-cells = <1>;
#size-cells = <1>;
- a9pll: arm_clk@00000 {
+ a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
clocks = <&osc>;
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
new file mode 100644
index 000000000000..431cda514230
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -0,0 +1,85 @@
+/*
+ * DTS for Unifi Switch 8 port
+ *
+ * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm-hr2.dtsi"
+
+/ {
+ compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
+ model = "Ubiquiti UniFi Switch 8 (BCM53342)";
+
+ /* Hurricane 2 designs use the second UART */
+ chosen {
+ bootargs = "console=ttyS1,115200 earlyprintk";
+ };
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>,
+ <0x68000000 0x08000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ bspi-sel = <0>;
+
+ flash: m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <12500000>;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "u-boot-env";
+ reg = <0xc0000 0x10000>;
+ };
+
+ partition@d0000 {
+ label = "shmoo";
+ reg = <0xd0000 0x10000>;
+ };
+
+ partition@e0000 {
+ label = "kernel0";
+ reg = <0xe0000 0xf00000>;
+ };
+
+ partition@fe0000 {
+ label = "kernel1";
+ reg = <0xfe0000 0xf10000>;
+ };
+
+ partition@1ef0000 {
+ label = "cfg";
+ reg = <0x1ef0000 0x100000>;
+ };
+
+ partition@1ff0000 {
+ label = "EEPROM";
+ reg = <0x1ff0000 0x10000>;
+ };
+ };
+};
+
+&pcie0 {
+ /* Attaches to the internal switch */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index c698a565b8ae..16007d72c346 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -107,7 +107,7 @@
gpio-controller;
#gpio-cells = <2>;
- uart0: serial@0300 {
+ uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 425c48971abe..d575823c5750 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -202,7 +202,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio@0400 {
+ gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -220,7 +220,7 @@
};
};
- gpio1: gpio@0800 {
+ gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -238,7 +238,7 @@
};
};
- gpio2: gpio@0c00 {
+ gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 4fe1574d08c3..501c59d97eae 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -182,7 +182,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio@0400 {
+ gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -200,7 +200,7 @@
};
};
- gpio1: gpio@0800 {
+ gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -218,7 +218,7 @@
};
};
- gpio2: gpio@0c00 {
+ gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index e548229697fc..bf3a6c9a1d34 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -234,7 +234,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio@0400 {
+ gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -252,7 +252,7 @@
};
};
- gpio1: gpio@0800 {
+ gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -270,7 +270,7 @@
};
};
- gpio2: gpio@0c00 {
+ gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index a0f0916156e6..eed89e659143 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -26,6 +26,19 @@
reg = <0xc0000000 0x08000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dsp_memory_region: dsp-memory@c3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xc3000000 0x1000000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 LCDK";
@@ -319,3 +332,8 @@
pinctrl-0 = <&vpif_capture_pins>;
status = "okay";
};
+
+&dsp {
+ memory-region = <&dsp_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index af68ef7b0caa..c66cf7895363 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -23,6 +23,18 @@
reg = <0xfffee000 0x2000>;
};
};
+ dsp: dsp@11800000 {
+ compatible = "ti,da850-dsp";
+ reg = <0x11800000 0x40000>,
+ <0x11e00000 0x8000>,
+ <0x11f00000 0x8000>,
+ <0x01c14044 0x4>,
+ <0x01c14174 0x8>;
+ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ status = "disabled";
+ };
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index f4a07bb7c3a2..4a0a5115b298 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -457,25 +457,25 @@
};
};
- thermal: thermal-diode@001c {
+ thermal: thermal-diode@1c {
compatible = "marvell,dove-thermal";
reg = <0x001c 0x0c>, <0x005c 0x08>;
};
- gate_clk: clock-gating-ctrl@0038 {
+ gate_clk: clock-gating-ctrl@38 {
compatible = "marvell,dove-gating-clock";
reg = <0x0038 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
- divider_clk: core-clock@0064 {
+ divider_clk: core-clock@64 {
compatible = "marvell,dove-divider-clock";
reg = <0x0064 0x8>;
#clock-cells = <1>;
};
- pinctrl: pin-ctrl@0200 {
+ pinctrl: pin-ctrl@200 {
compatible = "marvell,dove-pinctrl";
reg = <0x0200 0x14>,
<0x0440 0x04>;
@@ -719,13 +719,13 @@
};
};
- core_clk: core-clocks@0214 {
+ core_clk: core-clocks@214 {
compatible = "marvell,dove-core-clock";
reg = <0x0214 0x4>;
#clock-cells = <1>;
};
- gpio0: gpio-ctrl@0400 {
+ gpio0: gpio-ctrl@400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
@@ -737,7 +737,7 @@
interrupts = <12>, <13>, <14>, <60>;
};
- gpio1: gpio-ctrl@0420 {
+ gpio1: gpio-ctrl@420 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 343e95f9a001..e088bb93636a 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -256,3 +256,7 @@
status = "okay";
};
};
+
+&pcie1_rc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa426dabb6c3..ef9c90daa74b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -497,7 +497,3 @@
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
-
-&pcie1_rc {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 92b5cb40a9d5..ac9216293b7c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -170,7 +170,7 @@
pbias_mmc_reg: pbias_mmc_omap5 {
regulator-name = "pbias_mmc_omap5";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
};
};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
index 9a134ed271eb..bc9d5b697452 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -75,7 +75,7 @@
};
&bus {
- flash: nor@00000000 {
+ flash: nor@0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 639c2e605f3c..152e0291d0da 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -29,7 +29,7 @@
reg = <0x40000000 0x1ff00000>;
};
- firmware@0205f000 {
+ firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205f000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index bbdfcbc6e7d2..029eb18590cf 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -32,7 +32,7 @@
reg = <0x40000000 0x1ff00000>;
};
- firmware@0205F000 {
+ firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205F000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 0b45467d77a8..3743df4de390 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -32,7 +32,7 @@
reg = <0x40000000 0x1ff00000>;
};
- firmware@0205F000 {
+ firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205F000 0x1000>;
};
@@ -227,28 +227,6 @@
vci-supply = <&ldo20_reg>;
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
- power-on-delay= <30>;
- power-off-delay= <120>;
- reset-delay = <5>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <29>;
- panel-height-mm = <29>;
-
- display-timings {
- timing-0 {
- clock-frequency = <4600000>;
- hactive = <320>;
- vactive = <320>;
- hfront-porch = <1>;
- hback-porch = <1>;
- hsync-len = <1>;
- vfront-porch = <150>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 590ee442d0ae..2bd3872221a1 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -122,7 +122,7 @@
};
};
- sysram@02020000 {
+ sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5739389f5bb8..4768b086ed67 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -55,7 +55,7 @@
serial3 = &serial_3;
};
- clock_audss: clock-controller@03810000 {
+ clock_audss: clock-controller@3810000 {
compatible = "samsung,exynos4210-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
@@ -64,7 +64,7 @@
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
- i2s0: i2s@03830000 {
+ i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index f280954b260a..82c32d4d83d8 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -843,7 +843,7 @@
};
};
- pinctrl@03860000 {
+ pinctrl@3860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 0c89ea99de54..acd2b2286ccb 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -31,7 +31,7 @@
stdout-path = &serial_2;
};
- sysram@02020000 {
+ sysram@2020000 {
smp-sysram@0 {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 768fb075b1fd..03dd61f64809 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -64,7 +64,7 @@
};
};
- sysram: sysram@02020000 {
+ sysram: sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
#address-cells = <1>;
@@ -151,7 +151,7 @@
};
};
- pinctrl_2: pinctrl@03860000 {
+ pinctrl_2: pinctrl@3860000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x03860000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 14ce2c69bc0b..bda49b232f7b 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -26,7 +26,7 @@
reg = <0x40000000 0x40000000>;
};
- firmware@0203F000 {
+ firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 102acd78be15..a21be71000c1 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -20,7 +20,7 @@
stdout-path = &serial_1;
};
- firmware@0204F000 {
+ firmware@204f000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
@@ -31,8 +31,6 @@
pinctrl-0 = <&gpio_power_key>;
power_key {
- interrupt-parent = <&gpx1>;
- interrupts = <3 IRQ_TYPE_NONE>;
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -253,7 +251,7 @@
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
- usb3503: usb3503@08 {
+ usb3503: usb3503@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@@ -263,7 +261,7 @@
initial-mode = <1>;
};
- max77686: pmic@09 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 97882267ef09..acf48a018e5e 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -43,8 +43,6 @@
pinctrl-0 = <&gpio_power_key &gpio_home_key>;
home_key {
- interrupt-parent = <&gpx2>;
- interrupts = <2 IRQ_TYPE_NONE>;
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_HOME>;
label = "home key";
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 8a89eb893d64..b0b5ec7903a5 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -32,7 +32,7 @@
stdout-path = &serial_2;
};
- firmware@0203F000 {
+ firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index 1d27c28564e4..4eebd4721a5f 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -899,7 +899,7 @@
};
};
- pinctrl_2: pinctrl@03860000 {
+ pinctrl_2: pinctrl@3860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index bceb919ac637..220cdf109405 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -18,6 +18,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/pinctrl/samsung.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
@@ -40,7 +41,7 @@
stdout-path = &serial_2;
};
- firmware@0204F000 {
+ firmware@204f000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
@@ -97,6 +98,34 @@
gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ vsil12: voltage-regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "VSIL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&buck7_reg>;
+ };
+
+ vcc33mhl: voltage-regulator-7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3.3_MHL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc18mhl: voltage-regulator-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8_MHL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
gpio-keys {
@@ -206,7 +235,7 @@
#size-cells = <0>;
status = "okay";
- ak8975@0c {
+ ak8975@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@@ -229,6 +258,36 @@
};
};
+ i2c-mhl {
+ compatible = "i2c-gpio";
+ gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&i2c_mhl_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ sii9234: hdmi-bridge@39 {
+ compatible = "sil,sii9234";
+ avcc33-supply = <&vcc33mhl>;
+ iovcc18-supply = <&vcc18mhl>;
+ avcc12-supply = <&vsil12>;
+ cvcc12-supply = <&vsil12>;
+ reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpf3>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x39>;
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ };
+ };
+
camera: camera {
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
@@ -501,6 +560,29 @@
status = "okay";
};
+&hdmi {
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
+ vdd-supply = <&ldo3_reg>;
+ vdd_osc-supply = <&ldo4_reg>;
+ vdd_pll-supply = <&ldo3_reg>;
+ ddc = <&i2c_5>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ hdmi_to_mhl: endpoint {
+ remote-endpoint = <&mhl_to_hdmi>;
+ };
+ };
+ };
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
@@ -579,6 +661,10 @@
};
};
+&i2c_5 {
+ status = "okay";
+};
+
&i2c_7 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -587,7 +673,7 @@
pinctrl-names = "default";
status = "okay";
- max77686: max77686_pmic@09 {
+ max77686: max77686_pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -873,12 +959,20 @@
};
};
+&i2c_8 {
+ status = "okay";
+};
+
&i2s0 {
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mshc_0 {
broken-cd;
non-removable;
@@ -904,6 +998,18 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
+ mhl_int: mhl-int {
+ samsung,pins = "gpf3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i2c_mhl_bus: i2c-mhl-bus {
+ samsung,pins = "gpf0-4", "gpf0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
sleep0: sleep-states {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
@@ -1007,6 +1113,11 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
sleep1: sleep-states {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 7ff03a7e8fb9..b255ac55b1c1 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -150,7 +150,7 @@
};
};
- sysram@02020000 {
+ sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 18a7f396ac5f..0efd678b8251 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -152,6 +152,8 @@
};
&hdmi {
+ status = "okay";
+ ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
@@ -455,15 +457,9 @@
&i2c_2 {
status = "okay";
-
+ /* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
};
&i2c_3 {
@@ -489,15 +485,9 @@
&i2c_8 {
status = "okay";
-
+ /* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
};
&i2c_9 {
@@ -516,6 +506,10 @@
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 062cba4c2c31..1e3f9627766c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -116,6 +116,8 @@
};
&hdmi {
+ status = "okay";
+ ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
};
@@ -129,7 +131,7 @@
reg = <0x50>;
};
- max77686@09 {
+ max77686@9 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
@@ -308,24 +310,16 @@
&i2c_2 {
status = "okay";
+ /* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
};
&i2c_8 {
status = "okay";
+ /* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
};
&i2c_9 {
@@ -344,6 +338,10 @@
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 8788880e459d..2e7175d2b1b8 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -261,10 +261,10 @@
};
&hdmi {
+ status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
@@ -281,7 +281,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686: max77686@09 {
+ max77686: max77686@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
@@ -450,13 +450,9 @@
&i2c_2 {
status = "okay";
+ /* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
};
&i2c_3 {
@@ -514,19 +510,19 @@
&i2c_8 {
status = "okay";
+ /* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
};
&i2s0 {
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
/* eMMC flash */
&mmc_0 {
status = "okay";
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index d53bfcbeb39c..47dbc50546c1 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -91,10 +91,10 @@
};
&hdmi {
+ status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
ddc = <&i2c_2>;
hdmi-en-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
@@ -362,13 +362,9 @@
&i2c_2 {
status = "okay";
+ /* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
};
&i2c_3 {
@@ -412,19 +408,19 @@
&i2c_8 {
status = "okay";
+ /* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
};
&i2s0 {
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
broken-cd;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 8dbeb873e99c..5286084e1032 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -93,7 +93,7 @@
};
soc: soc {
- sysram@02020000 {
+ sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x30000>;
#address-cells = <1>;
@@ -219,7 +219,7 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
- pinctrl_3: pinctrl@03860000 {
+ pinctrl_3: pinctrl@3860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -367,6 +367,11 @@
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
};
i2c_9: i2c@121D0000 {
@@ -475,7 +480,7 @@
status = "disabled";
};
- i2s0: i2s@03830000 {
+ i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
status = "disabled";
reg = <0x03830000 0x100>;
@@ -637,7 +642,7 @@
};
gsc_0: gsc@13e00000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@@ -647,7 +652,7 @@
};
gsc_1: gsc@13e10000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@@ -657,7 +662,7 @@
};
gsc_2: gsc@13e20000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@@ -667,7 +672,7 @@
};
gsc_3: gsc@13e30000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@@ -687,6 +692,8 @@
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
samsung,syscon-phandle = <&pmu_system_controller>;
+ phy = <&hdmiphy>;
+ status = "disabled";
};
hdmicec: cec@101B0000 {
@@ -702,7 +709,7 @@
status = "disabled";
};
- mixer@14450000 {
+ mixer: mixer@14450000 {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
@@ -711,6 +718,7 @@
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
iommus = <&sysmmu_tv>;
+ status = "disabled";
};
dp_phy: video-phy {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index c4de1353e5df..a45eaae33f8f 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -54,7 +54,7 @@
#clock-cells = <0>;
};
- firmware@02073000 {
+ firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
@@ -164,7 +164,7 @@
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
- usb3503: usb-hub@08 {
+ usb3503: usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@@ -178,7 +178,7 @@
refclk-frequency = <24000000>;
};
- max77802: pmic@09 {
+ max77802: pmic@9 {
compatible = "maxim,max77802";
reg = <0x9>;
interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 9cb7726ef8d0..25f21e9e7d58 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -32,7 +32,7 @@
#clock-cells = <0>;
};
- firmware@02037000 {
+ firmware@2037000 {
compatible = "samsung,secure-firmware";
reg = <0x02037000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 7eab4bc07cec..06713ec86f0d 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -187,7 +187,7 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
- pinctrl_3: pinctrl@03860000 {
+ pinctrl_3: pinctrl@3860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@
};
};
- audi2s0: i2s@03830000 {
+ audi2s0: i2s@3830000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index ee1bb9b8b366..bc78575d8a4d 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -30,7 +30,7 @@
bootargs = "console=ttySAC3,115200";
};
- firmware@02073000 {
+ firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
@@ -360,6 +360,10 @@
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
broken-cd;
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 5c052d7ff554..d7d703aa1699 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -36,6 +36,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu1: cpu@1 {
@@ -48,6 +49,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu2: cpu@2 {
@@ -60,6 +62,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu3: cpu@3 {
@@ -72,6 +75,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu4: cpu@100 {
@@ -85,6 +89,7 @@
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu5: cpu@101 {
@@ -97,6 +102,7 @@
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu6: cpu@102 {
@@ -109,6 +115,7 @@
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu7: cpu@103 {
@@ -121,6 +128,7 @@
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 683a4cfb4a23..38af8769711c 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -696,6 +696,10 @@
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
/* eMMC flash */
&mmc_0 {
status = "okay";
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 08c8ab173e87..310d8637ce9f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -130,6 +130,7 @@
&hdmi {
status = "okay";
+ ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
@@ -347,12 +348,12 @@
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ /* used by HDMI DDC */
status = "okay";
+};
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
+&mixer {
+ status = "okay";
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 02d2f898efa6..8aa2cc7aa125 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -352,7 +352,7 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
- pinctrl_4: pinctrl@03860000 {
+ pinctrl_4: pinctrl@3860000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,7 +365,7 @@
interrupt-parent = <&gic>;
ranges;
- adma: adma@03880000 {
+ adma: adma@3880000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x03880000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -429,7 +429,7 @@
};
};
- i2s0: i2s@03830000 {
+ i2s0: i2s@3830000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x03830000 0x100>;
dmas = <&adma 0
@@ -646,6 +646,7 @@
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
iommus = <&sysmmu_tv>;
+ status = "disabled";
};
rotator: rotator@11C00000 {
@@ -658,7 +659,7 @@
};
gsc_0: video-scaler@13e00000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL0>;
@@ -668,7 +669,7 @@
};
gsc_1: video-scaler@13e10000 {
- compatible = "samsung,exynos5-gsc";
+ compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL1>;
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index bf3c6f1ec4ee..ec01d8020c2d 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -35,6 +35,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu1: cpu@101 {
@@ -47,6 +48,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu2: cpu@102 {
@@ -59,6 +61,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu3: cpu@103 {
@@ -71,6 +74,7 @@
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <539>;
};
cpu4: cpu@0 {
@@ -84,6 +88,7 @@
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu5: cpu@1 {
@@ -96,6 +101,7 @@
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu6: cpu@2 {
@@ -108,6 +114,7 @@
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
cpu7: cpu@3 {
@@ -120,6 +127,7 @@
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
new file mode 100644
index 000000000000..a5b8d0f0877e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -0,0 +1,443 @@
+/*
+ * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x7EA00000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ firmware@02073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&bus_wcore {
+ devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+ <&nocp_mem1_0>, <&nocp_mem1_1>;
+ vdd-supply = <&buck3_reg>;
+ exynos,saturation-ratio = <100>;
+ status = "okay";
+};
+
+&bus_noc {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys_apb {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys2 {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_gen {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_peri {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_g2d {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_g2d_acp {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_jpeg {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_jpeg_apb {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_disp1_fimd {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_disp1 {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_gscl_scaler {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_mscl {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&buck6_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ samsung,s2mps11-acokb-ground;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vddq_mmc0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vdd_adc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vddq_mmc2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "vdd_emmc_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+};
+
+&nocp_mem0_0 {
+ status = "okay";
+};
+
+&nocp_mem0_1 {
+ status = "okay";
+};
+
+&nocp_mem1_0 {
+ status = "okay";
+};
+
+&nocp_mem1_1 {
+ status = "okay";
+};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+/* usbdrd_dwc3_1 mode customized in each board */
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
new file mode 100644
index 000000000000..fb8e8ae776e9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -0,0 +1,213 @@
+/*
+ * Hardkernel Odroid HC1 board device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroid-core.dtsi"
+
+/ {
+ model = "Hardkernel Odroid HC1";
+ compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ trips {
+ cpu0_alert0: cpu-alert-0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ cpu0_alert1: cpu-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ cpu0_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * When reaching cpu0_alert0, reduce CPU
+ * by 2 steps. On Exynos5422/5800 that would
+ * be: 1600 MHz and 1100 MHz.
+ */
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ /*
+ * When reaching cpu0_alert1, reduce CPU
+ * further, down to 600 MHz (12 steps for big,
+ * 7 steps for LITTLE).
+ */
+ map2 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1 0>;
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2 0>;
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3 0>;
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ };
+
+};
+
+&pwm {
+ /*
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
index c0b85981c6bf..da3141a307d5 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -11,6 +11,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/sound/samsung-i2s.h>
+
/ {
sound: sound {
compatible = "simple-audio-card";
@@ -43,6 +45,17 @@
};
};
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-rates = <0>,
+ <0>,
+ <19200000>;
+};
+
&hsi2c_5 {
status = "okay";
max98090: max98090@10 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index a183b56283f8..445c6c5a1300 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -12,32 +12,28 @@
* published by the Free Software Foundation.
*/
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include "exynos5422-odroid-core.dtsi"
/ {
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x7EA00000>;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- firmware@02073000 {
- compatible = "samsung,secure-firmware";
- reg = <0x02073000 0x1000>;
- };
-
- fixed-rate-clocks {
- oscclk {
- compatible = "samsung,exynos5420-oscclk";
- clock-frequency = <24000000>;
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key>;
+
+ power_key {
+ /*
+ * The power button (SW2) is connected to the PWRON
+ * pin (active high) of the S2MPS11 PMIC, which acts
+ * as a 16ms debouce filter and signal inverter with
+ * output on ONOB pin (active low). ONOB PMIC pin is
+ * then connected to XEINT3 SoC pin.
+ */
+ gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <0>;
+ wakeup-source;
};
};
@@ -63,22 +59,22 @@
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
- cpu_alert0: cpu-alert-0 {
+ cpu0_alert0: cpu-alert-0 {
temperature = <50000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_alert1: cpu-alert-1 {
+ cpu0_alert1: cpu-alert-1 {
temperature = <60000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_alert2: cpu-alert-2 {
+ cpu0_alert2: cpu-alert-2 {
temperature = <70000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_crit0: cpu-crit-0 {
+ cpu0_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
@@ -87,59 +83,258 @@
* Exynos542x supports only 4 trip-points
* so for these polling mode is required.
* Start polling at temperature level of last
- * interrupt-driven trip: cpu_alert2
+ * interrupt-driven trip: cpu0_alert2
*/
- cpu_alert3: cpu-alert-3 {
+ cpu0_alert3: cpu-alert-3 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
- cpu_alert4: cpu-alert-4 {
+ cpu0_alert4: cpu-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
-
};
cooling-maps {
map0 {
- trip = <&cpu_alert0>;
+ trip = <&cpu0_alert0>;
cooling-device = <&fan0 0 1>;
};
map1 {
- trip = <&cpu_alert1>;
+ trip = <&cpu0_alert1>;
cooling-device = <&fan0 1 2>;
};
map2 {
- trip = <&cpu_alert2>;
+ trip = <&cpu0_alert2>;
cooling-device = <&fan0 2 3>;
};
/*
- * When reaching cpu_alert3, reduce CPU
+ * When reaching cpu0_alert3, reduce CPU
* by 2 steps. On Exynos5422/5800 that would
* be: 1600 MHz and 1100 MHz.
*/
map3 {
- trip = <&cpu_alert3>;
+ trip = <&cpu0_alert3>;
cooling-device = <&cpu0 0 2>;
};
map4 {
- trip = <&cpu_alert3>;
+ trip = <&cpu0_alert3>;
cooling-device = <&cpu4 0 2>;
};
-
/*
- * When reaching cpu_alert4, reduce CPU
- * further, down to 600 MHz (11 steps for big,
+ * When reaching cpu0_alert4, reduce CPU
+ * further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
map5 {
- trip = <&cpu_alert4>;
+ trip = <&cpu0_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu0_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu1_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu1_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu1_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu1_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu1_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu1_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu1_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu2_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu2_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu2_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu2_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu2_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu2_alert4>;
cooling-device = <&cpu0 3 7>;
};
map6 {
- trip = <&cpu_alert4>;
- cooling-device = <&cpu4 3 11>;
+ trip = <&cpu2_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu3_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu3_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu3_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu3_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu3_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu3_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu3_alert4>;
+ cooling-device = <&cpu4 3 12>;
};
};
};
@@ -151,110 +346,9 @@
status = "okay";
};
-&bus_wcore {
- devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
- <&nocp_mem1_0>, <&nocp_mem1_1>;
- vdd-supply = <&buck3_reg>;
- exynos,saturation-ratio = <100>;
- status = "okay";
-};
-
-&bus_noc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys2 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gen {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_peri {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d_acp {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1_fimd {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gscl_scaler {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&clock_audss {
- assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
- <&clock_audss EXYNOS_MOUT_I2S>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>;
- assigned-clock-parents = <&clock CLK_FIN_PLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-rates = <0>,
- <0>,
- <19200000>;
-};
-
-&cpu0 {
- cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
&hdmi {
status = "okay";
+ ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
@@ -269,246 +363,15 @@
needs-hpd;
};
-&hsi2c_4 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- samsung,s2mps11-acokb-ground;
-
- interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&s2mps11_irq>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vddq_mmc0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "vdd_adc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vddq_mmc2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "vdd_emmc_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ /* used by HDMI DDC */
status = "okay";
+};
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
+&mixer {
+ status = "okay";
};
&mmc_0 {
@@ -530,48 +393,18 @@
vqmmc-supply = <&ldo3_reg>;
};
-&mmc_2 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
-};
-
-&nocp_mem0_0 {
- status = "okay";
-};
-
-&nocp_mem0_1 {
- status = "okay";
-};
-
-&nocp_mem1_0 {
- status = "okay";
-};
-
-&nocp_mem1_1 {
- status = "okay";
-};
-
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
+ power_key: power-key {
+ samsung,pins = "gpx0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- s2mps11_irq: s2mps11-irq {
- samsung,pins = "gpx0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
@@ -584,45 +417,3 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
-
-&tmu_cpu0 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 92bd2c6f7631..7eafad333bdb 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -56,7 +56,7 @@
samsung,spi-feedback-delay = <0>;
};
- partition@00000 {
+ partition@0 {
label = "BootLoader";
reg = <0x60000 0x80000>;
read-only;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 7a00be7ea6d7..9c3c75ae5e48 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -196,7 +196,7 @@
clock-names = "watchdog";
};
- gmac: ethernet@00230000 {
+ gmac: ethernet@230000 {
compatible = "snps,dwmac-3.70a", "snps,dwmac";
reg = <0x00230000 0x8000>;
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 0389e8a10d0b..a5007f182bc4 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -29,7 +29,7 @@
};
soc: soc {
- sysram@02020000 {
+ sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x54000>;
#address-cells = <1>;
@@ -134,6 +134,7 @@
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_u3_susphy_quirk;
};
};
@@ -154,6 +155,7 @@
reg = <0x12400000 0x10000>;
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_u3_susphy_quirk;
};
};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 8613944ea5c5..6a9fdc0760f0 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -50,7 +50,7 @@
reg = <0x0 0x7c0000>;
};
- root@07c0000 {
+ root@7c0000 {
label = "root";
reg = <0x7c0000 0x7840000>;
};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index b9b07d0895cf..cb5c925bd597 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -142,6 +142,12 @@
groups = "idegrp";
};
};
+ tvc_default_pins: pinctrl-tvc {
+ mux {
+ function = "tvc";
+ groups = "tvcgrp";
+ };
+ };
};
};
@@ -348,5 +354,20 @@
memcpy-bus-width = <32>;
#dma-cells = <2>;
};
+
+ display-controller@6a000000 {
+ compatible = "cortina,gemini-tvc", "faraday,tve200";
+ reg = <0x6a000000 0x1000>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_TVC>;
+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+ <&syscon GEMINI_CLK_TVC>;
+ clock-names = "PCLK", "TVE";
+ pinctrl-names = "default";
+ pinctrl-0 = <&tvc_default_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 9d5fd5cfefa6..f7cf4f53e764 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -91,14 +91,14 @@
reboot-offset = <0x4>;
};
- global_timer@0a000200 {
+ global_timer@a000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x0a000200 0x100>;
interrupts = <1 11 0xf04>;
clocks = <&hisi_refclk144mhz>;
};
- local_timer@0a000600 {
+ local_timer@a000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x0a000600 0x100>;
interrupts = <1 13 0xf04>;
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33c2654..ca48641d0f48 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -18,7 +18,7 @@
model = "Hisilicon D01 Development Board";
compatible = "hisilicon,hip04-d01";
- memory@00000000,10000000 {
+ memory@0,10000000 {
device_type = "memory";
reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
<0x00000004 0xc0000000 0x00000003 0x40000000>;
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 6c712a97e1fe..50d3f8426da1 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -39,7 +39,7 @@
compatible = "simple-bus";
ranges;
- timer0: timer@00002000 {
+ timer0: timer@2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00002000 0x1000>;
/* timer00 & timer01 */
@@ -48,7 +48,7 @@
status = "disabled";
};
- timer1: timer@00a29000 {
+ timer1: timer@a29000 {
/*
* Only used in NORMAL state, not available ins
* SLOW or DOZE state.
@@ -62,7 +62,7 @@
status = "disabled";
};
- timer2: timer@00a2a000 {
+ timer2: timer@a2a000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a2a000 0x1000>;
/* timer20 & timer21 */
@@ -71,7 +71,7 @@
status = "disabled";
};
- timer3: timer@00a2b000 {
+ timer3: timer@a2b000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a2b000 0x1000>;
/* timer30 & timer31 */
@@ -80,7 +80,7 @@
status = "disabled";
};
- timer4: timer@00a81000 {
+ timer4: timer@a81000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00a81000 0x1000>;
/* timer30 & timer31 */
@@ -89,7 +89,7 @@
status = "disabled";
};
- uart0: uart@00b00000 {
+ uart0: uart@b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b00000 0x1000>;
interrupts = <0 49 4>;
@@ -98,7 +98,7 @@
status = "disabled";
};
- uart1: uart@00006000 {
+ uart1: uart@6000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00006000 0x1000>;
interrupts = <0 50 4>;
@@ -107,7 +107,7 @@
status = "disabled";
};
- uart2: uart@00b02000 {
+ uart2: uart@b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b02000 0x1000>;
interrupts = <0 51 4>;
@@ -116,7 +116,7 @@
status = "disabled";
};
- uart3: uart@00b03000 {
+ uart3: uart@b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b03000 0x1000>;
interrupts = <0 52 4>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- uart4: uart@00b04000 {
+ uart4: uart@b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 53 4>;
@@ -199,7 +199,7 @@
status = "disabled";
};
- gpio5: gpio@004000 {
+ gpio5: gpio@4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x004000 0x1000>;
interrupts = <0 113 0x4>;
@@ -378,7 +378,7 @@
};
};
- local_timer@00a00600 {
+ local_timer@a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
@@ -392,7 +392,7 @@
cache-level = <2>;
};
- sysctrl: system-controller@00000000 {
+ sysctrl: system-controller@0 {
compatible = "hisilicon,sysctrl", "syscon";
reg = <0x00000000 0x1000>;
};
@@ -404,7 +404,7 @@
mask = <0xdeadbeef>;
};
- cpuctrl@00a22000 {
+ cpuctrl@a22000 {
compatible = "hisilicon,cpuctrl";
#address-cells = <1>;
#size-cells = <1>;
@@ -489,7 +489,7 @@
clocks = <&clock HIX5HD2_SATA_CLK>;
};
- ir: ir@001000 {
+ ir: ir@1000 {
compatible = "hisilicon,hix5hd2-ir";
reg = <0x001000 0x1000>;
interrupts = <0 47 4>;
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 38d712be5685..20f6565c337d 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -40,7 +40,7 @@
spi1 = &cspi2;
};
- aitc: aitc-interrupt-controller@00223000 {
+ aitc: aitc-interrupt-controller@223000 {
compatible = "fsl,imx1-aitc", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
@@ -69,14 +69,14 @@
interrupt-parent = <&aitc>;
ranges;
- aipi@00200000 {
+ aipi@200000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00200000 0x10000>;
ranges;
- gpt1: timer@00202000 {
+ gpt1: timer@202000 {
compatible = "fsl,imx1-gpt";
reg = <0x00202000 0x1000>;
interrupts = <59>;
@@ -85,7 +85,7 @@
clock-names = "ipg", "per";
};
- gpt2: timer@00203000 {
+ gpt2: timer@203000 {
compatible = "fsl,imx1-gpt";
reg = <0x00203000 0x1000>;
interrupts = <58>;
@@ -94,7 +94,7 @@
clock-names = "ipg", "per";
};
- fb: fb@00205000 {
+ fb: fb@205000 {
compatible = "fsl,imx1-fb";
reg = <0x00205000 0x1000>;
interrupts = <14>;
@@ -105,7 +105,7 @@
status = "disabled";
};
- uart1: serial@00206000 {
+ uart1: serial@206000 {
compatible = "fsl,imx1-uart";
reg = <0x00206000 0x1000>;
interrupts = <30 29 26>;
@@ -115,7 +115,7 @@
status = "disabled";
};
- uart2: serial@00207000 {
+ uart2: serial@207000 {
compatible = "fsl,imx1-uart";
reg = <0x00207000 0x1000>;
interrupts = <24 23 20>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- pwm: pwm@00208000 {
+ pwm: pwm@208000 {
#pwm-cells = <2>;
compatible = "fsl,imx1-pwm";
reg = <0x00208000 0x1000>;
@@ -135,7 +135,7 @@
clock-names = "ipg", "per";
};
- dma: dma@00209000 {
+ dma: dma@209000 {
compatible = "fsl,imx1-dma";
reg = <0x00209000 0x1000>;
interrupts = <61 60>;
@@ -145,7 +145,7 @@
#dma-cells = <1>;
};
- uart3: serial@0020a000 {
+ uart3: serial@20a000 {
compatible = "fsl,imx1-uart";
reg = <0x0020a000 0x1000>;
interrupts = <54 4 1>;
@@ -156,14 +156,14 @@
};
};
- aipi@00210000 {
+ aipi@210000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00210000 0x10000>;
ranges;
- cspi1: cspi@00213000 {
+ cspi1: cspi@213000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
@@ -175,7 +175,7 @@
status = "disabled";
};
- i2c: i2c@00217000 {
+ i2c: i2c@217000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-i2c";
@@ -185,7 +185,7 @@
status = "disabled";
};
- cspi2: cspi@00219000 {
+ cspi2: cspi@219000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
@@ -197,20 +197,20 @@
status = "disabled";
};
- clks: ccm@0021b000 {
+ clks: ccm@21b000 {
compatible = "fsl,imx1-ccm";
reg = <0x0021b000 0x1000>;
#clock-cells = <1>;
};
- iomuxc: iomuxc@0021c000 {
+ iomuxc: iomuxc@21c000 {
compatible = "fsl,imx1-iomuxc";
reg = <0x0021c000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gpio1: gpio@0021c000 {
+ gpio1: gpio@21c000 {
compatible = "fsl,imx1-gpio";
reg = <0x0021c000 0x100>;
interrupts = <11>;
@@ -220,7 +220,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio@0021c100 {
+ gpio2: gpio@21c100 {
compatible = "fsl,imx1-gpio";
reg = <0x0021c100 0x100>;
interrupts = <12>;
@@ -230,7 +230,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio@0021c200 {
+ gpio3: gpio@21c200 {
compatible = "fsl,imx1-gpio";
reg = <0x0021c200 0x100>;
interrupts = <13>;
@@ -240,7 +240,7 @@
#interrupt-cells = <2>;
};
- gpio4: gpio@0021c300 {
+ gpio4: gpio@21c300 {
compatible = "fsl,imx1-gpio";
reg = <0x0021c300 0x100>;
interrupts = <62>;
@@ -252,7 +252,7 @@
};
};
- weim: weim@00220000 {
+ weim: weim@220000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,imx1-weim";
@@ -269,7 +269,7 @@
status = "disabled";
};
- esram: esram@00300000 {
+ esram: esram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x20000>;
};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index db39bd6b8e00..0f053721d80f 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -64,7 +64,7 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio1 20>;
+ cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index c52692821fb1..2d15ce72d006 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -135,7 +135,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 129>;
@@ -295,6 +295,14 @@
status = "okay";
};
+&tsc {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index d2a91976e67f..ae078341fb60 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -143,7 +143,7 @@
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 581e85f4fd4c..49ab40838e69 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -148,7 +148,7 @@
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 5309bb90d7d5..7f5b80402c54 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -194,7 +194,7 @@
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index dbfb8aab505f..22aa025cab1e 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -137,7 +137,7 @@
};
i2c0: i2c@80058000 {
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 0ebbc83852d0..152621ea37db 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,13 +1,43 @@
/*
* Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -45,82 +75,69 @@
status = "disabled";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb0_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_2p5v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_can_xcvr: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "CAN XCVR";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
- };
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+ };
- reg_lcd: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "LCD POWER";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_lcd: regulator-lcd-power {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_lcd_reset: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "LCD RESET";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
- startup-delay-us = <300000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- };
+ reg_lcd_reset: regulator-lcd-reset {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <300000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
};
clocks {
@@ -298,7 +315,7 @@
clock-frequency = <400000>;
status = "okay";
- sgtl5000: sgtl5000@0a {
+ sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_2p5v>;
@@ -312,7 +329,7 @@
pinctrl-names = "default";
pinctrl-0 = <&tx28_pca9554_pins>;
interrupt-parent = <&gpio3>;
- interrupts = <28 0>;
+ interrupts = <28 IRQ_TYPE_NONE>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -336,7 +353,7 @@
pinctrl-names = "default";
pinctrl-0 = <&tx28_tsc2007_pins>;
interrupt-parent = <&gpio3>;
- interrupts = <20 0>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = /bits/ 16 <660>;
};
@@ -344,6 +361,8 @@
ds1339: rtc@68 {
compatible = "mxim,ds1339";
reg = <0x68>;
+ trickle-resistor-ohms = <250>;
+ trickle-diode-disable;
};
};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index e9357131b026..ae98d6759074 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -65,7 +65,7 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio3 24>;
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 3747d80104f4..35955e63d6c5 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -52,7 +52,7 @@
};
};
- tzic: tz-interrupt-controller@0fffc000 {
+ tzic: tz-interrupt-controller@fffc000 {
compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
@@ -443,6 +443,7 @@
clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index a5e6091c8729..3e1846a64d93 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -16,7 +16,7 @@
model = "Armadeus Systems APF51Dev docking/development board";
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
- backlight@bl1{
+ backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
compatible = "gpio-backlight";
@@ -24,7 +24,7 @@
default-on;
};
- display@di1 {
+ disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
@@ -51,7 +51,7 @@
port {
display_in: endpoint {
- remote-endpoint = <&ipu_di0_disp0>;
+ remote-endpoint = <&ipu_di0_disp1>;
};
};
};
@@ -120,7 +120,7 @@
pinctrl-0 = <&pinctrl_hog>;
imx51-apf51dev {
- pinctrl_backlight: bl1grp {
+ pinctrl_backlight: backlightgrp {
fsl,pins = <
MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
>;
@@ -218,6 +218,6 @@
};
};
-&ipu_di0_disp0 {
+&ipu_di0_disp1 {
remote-endpoint = <&display_in>;
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 873cf242679c..2a694c5cc8ae 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -39,7 +39,7 @@
};
};
- display0: display@di0 {
+ display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
@@ -61,12 +61,12 @@
port {
display0_in: endpoint {
- remote-endpoint = <&ipu_di0_disp0>;
+ remote-endpoint = <&ipu_di0_disp1>;
};
};
};
- display1: display@di1 {
+ display2: disp2 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
@@ -93,7 +93,7 @@
port {
display1_in: endpoint {
- remote-endpoint = <&ipu_di1_disp1>;
+ remote-endpoint = <&ipu_di1_disp2>;
};
};
};
@@ -337,7 +337,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_clkcodec>;
@@ -348,11 +348,11 @@
};
};
-&ipu_di0_disp0 {
+&ipu_di0_disp1 {
remote-endpoint = <&display0_in>;
};
-&ipu_di1_disp1 {
+&ipu_di1_disp2 {
remote-endpoint = <&display1_in>;
};
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index ca1cc5eca80f..564233e97412 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -50,7 +50,7 @@
power-supply = <&backlight_reg>;
};
- display0: display@di0 {
+ display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
@@ -71,9 +71,9 @@
};
};
- port@0 {
+ port {
display0_in: endpoint {
- remote-endpoint = <&ipu_di0_disp0>;
+ remote-endpoint = <&ipu_di0_disp1>;
};
};
};
@@ -107,7 +107,7 @@
};
};
-&ipu_di0_disp0 {
+&ipu_di0_disp1 {
remote-endpoint = <&display0_in>;
};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
new file mode 100644
index 000000000000..49be0e1c812d
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -0,0 +1,834 @@
+/*
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ model = "ZII RDU1 Board";
+ compatible = "zii,imx51-rdu1", "fsl,imx51";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio_gpio;
+ rtc0 = &ds1341;
+ };
+
+ clk_26M_osc: 26M_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clk_26M_osc_gate: 26M_gate {
+ compatible = "gpio-gate-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_clk26mhz>;
+ clocks = <&clk_26M_osc>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ clk_26M_usb: usbhost_gate {
+ compatible = "gpio-gate-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbgate26mhz>;
+ clocks = <&clk_26M_osc_gate>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ };
+
+ clk_26M_snd: snd_gate {
+ compatible = "gpio-gate-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sndgate26mhz>;
+ clocks = <&clk_26M_osc_gate>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_5p0v_main: regulator-5p0v-main {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ disp0 {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel {
+ /* no compatible here, bootloader will patch in correct one */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ power-supply = <&reg_3p3v>;
+ enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ i2c_gpio: i2c-gpio {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_swi2c>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+ <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,delay-us = <50>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clk_26M_snd>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
+ #sound-dai-cells = <0>;
+ };
+ };
+
+ spi_gpio: spi-gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiospi0>;
+ status = "okay";
+
+ gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+
+ eeprom@0 {
+ compatible = "eeprom-93xx46";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cs-high;
+ data-size = <8>;
+ };
+ };
+
+ mdio_gpio: mdio-gpio {
+ compatible = "virtual,mdio-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_swmdio>;
+ gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
+ <&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "netaux";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "netright";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "netleft";
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "RDU1 audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT";
+ simple-audio-card,aux-devs = <&tpa6130a2>;
+
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clk_26M_snd>;
+ };
+ };
+
+ usbh1phy: usbphy1 {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1phy>;
+ clocks = <&clk_26M_usb>;
+ clock-names = "main_clk";
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vusb_reg>;
+ };
+
+ usbh2phy: usbphy2 {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2phy>;
+ clocks = <&clk_26M_usb>;
+ clock-names = "main_clk";
+ reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vusb_reg>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ aud3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
+};
+
+&cpu {
+ cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "fsl,mc13892";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ spi-max-frequency = <6000000>;
+ spi-cs-high;
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb_reg: vusb {
+ regulator-always-on;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+ };
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+ sysled0 {
+ reg = <3>;
+ label = "system:green:status";
+ linux,default-trigger = "default-on";
+ };
+
+ sysled1 {
+ reg = <4>;
+ label = "system:green:act";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vgen3_reg>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ tpa6130a2: amp@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ampgpio>;
+ power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <&reg_3p3v>;
+ };
+
+ ds1341: rtc@68 {
+ compatible = "maxim,ds1341";
+ reg = <0x68>;
+ };
+
+ /* touch nodes default disabled, bootloader will enable the right one */
+
+ touchscreen@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ status = "disabled";
+ };
+
+ touchscreen@4c {
+ compatible = "atmel,maxtouch";
+ reg = <0x4c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ status = "disabled";
+ };
+
+ touchscreen@20 {
+ compatible = "syna,rmi4_i2c";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <2>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touch-inverted-y;
+ touch-swapped-x-y;
+ syna,sensor-type = <1>;
+ };
+ };
+
+};
+
+&ipu_di0_disp1 {
+ remote-endpoint = <&display_in>;
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ fsl,usbphy = <&usbh1phy>;
+ disable-over-current;
+ vbus-supply = <&reg_5p0v_main>;
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ fsl,usbphy = <&usbh2phy>;
+ disable-over-current;
+ vbus-supply = <&reg_5p0v_main>;
+ status = "okay";
+};
+
+&usbphy0 {
+ vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+ dr_mode = "host";
+ disable-over-current;
+ phy_type = "utmi_wide";
+ vbus-supply = <&reg_5p0v_main>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ampgpio: ampgpiogrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_9__GPIO1_9 0x5e
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0xa5
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x85
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0xa5
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x85
+ >;
+ };
+
+ pinctrl_clk26mhz: clk26mhzgrp {
+ fsl,pins = <
+ MX51_PAD_DI1_PIN12__GPIO3_1 0x85
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
+ MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5
+ MX51_PAD_NANDF_D9__FEC_RDATA0 0x2180
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x180
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x180
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x180
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x180
+ MX51_PAD_NANDF_D11__FEC_RX_DV 0x2084
+ MX51_PAD_EIM_CS5__FEC_CRS 0x180
+ MX51_PAD_NANDF_RB2__FEC_COL 0x2180
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x2180
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x2004
+ MX51_PAD_NANDF_CS3__FEC_MDC 0x2004
+ MX51_PAD_NANDF_D8__FEC_TDATA0 0x2180
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 0x2004
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 0x2004
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x2004
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180
+ MX51_PAD_EIM_A20__GPIO2_14 0x85
+ >;
+ };
+
+ pinctrl_gpiospi0: gpiospi0grp {
+ fsl,pins = <
+ MX51_PAD_CSI2_D18__GPIO4_11 0x85
+ MX51_PAD_CSI2_D19__GPIO4_12 0x85
+ MX51_PAD_CSI2_HSYNC__GPIO4_14 0x85
+ MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x85
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX51_PAD_DI1_D0_CS__GPIO3_3 0x85
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_4__GPIO1_4 0x1e0
+ MX51_PAD_GPIO1_8__GPIO1_8 0x21e2
+ >;
+ };
+
+ pinctrl_sndgate26mhz: sndgate26mhzgrp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_RDY__GPIO4_26 0x85
+ >;
+ };
+
+ pinctrl_swi2c: swi2cgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__GPIO1_2 0xc5
+ MX51_PAD_DI1_D1_CS__GPIO3_4 0x400001f5
+ >;
+ };
+
+ pinctrl_swmdio: swmdiogrp {
+ fsl,pins = <
+ MX51_PAD_NANDF_D14__GPIO3_26 0x21e6
+ MX51_PAD_NANDF_D15__GPIO3_25 0x21e6
+ >;
+ };
+
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX51_PAD_CSI1_D8__GPIO3_12 0x85
+ MX51_PAD_CSI1_D9__GPIO3_13 0x85
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c4
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0xc5
+ MX51_PAD_UART2_TXD__UART2_TXD 0xc5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_usbgate26mhz: usbgate26mhzgrp {
+ fsl,pins = <
+ MX51_PAD_DISP2_DAT6__GPIO1_19 0x85
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX51_PAD_USBH1_STP__USBH1_STP 0x0
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x0
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x0
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x0
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x0
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x0
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x0
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x0
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x0
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x0
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x0
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x0
+ >;
+ };
+
+ pinctrl_usbh1phy: usbh1phygrp {
+ fsl,pins = <
+ MX51_PAD_NANDF_D0__GPIO4_8 0x85
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX51_PAD_EIM_A26__USBH2_STP 0x0
+ MX51_PAD_EIM_A24__USBH2_CLK 0x0
+ MX51_PAD_EIM_A25__USBH2_DIR 0x0
+ MX51_PAD_EIM_A27__USBH2_NXT 0x0
+ MX51_PAD_EIM_D16__USBH2_DATA0 0x0
+ MX51_PAD_EIM_D17__USBH2_DATA1 0x0
+ MX51_PAD_EIM_D18__USBH2_DATA2 0x0
+ MX51_PAD_EIM_D19__USBH2_DATA3 0x0
+ MX51_PAD_EIM_D20__USBH2_DATA4 0x0
+ MX51_PAD_EIM_D21__USBH2_DATA5 0x0
+ MX51_PAD_EIM_D22__USBH2_DATA6 0x0
+ MX51_PAD_EIM_D23__USBH2_DATA7 0x0
+ >;
+ };
+
+ pinctrl_usbh2phy: usbh2phygrp {
+ fsl,pins = <
+ MX51_PAD_NANDF_D1__GPIO4_7 0x85
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1ee1d542d9ad..378be720b3c7 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -148,14 +148,14 @@
ipu_di0: port@2 {
reg = <2>;
- ipu_di0_disp0: endpoint {
+ ipu_di0_disp1: endpoint {
};
};
ipu_di1: port@3 {
reg = <3>;
- ipu_di1_disp1: endpoint {
+ ipu_di1_disp2: endpoint {
};
};
};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 4347a321c782..e48525763b1b 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -16,7 +16,7 @@
model = "Aries/DENX M53EVK";
compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
- display1: display@di1 {
+ display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
@@ -150,7 +150,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
@@ -183,7 +183,7 @@
>;
};
- led_pin_gpio: led_gpio@0 {
+ led_pin_gpio: led_gpio {
fsl,pins = <
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index df705ba48897..296dd74fc246 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -30,7 +30,7 @@
power-supply = <&reg_backlight>;
};
- disp1: display@disp1 {
+ disp1: disp1 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp1_1>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
new file mode 100644
index 000000000000..cce959438a79
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -0,0 +1,1042 @@
+/*
+ * Copyright 2014 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "General Electric CS ONE";
+ compatible = "ge,imx53-cpuvo", "fsl,imx53";
+
+ aliases {
+ spi0 = &cspi;
+ spi1 = &ecspi1;
+ spi2 = &ecspi2;
+ };
+
+ chosen {
+ stdout-path = "&uart1:115200n8";
+ };
+
+ memory@70000000 {
+ device_type = "memory";
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
+ };
+
+ cko2_11M: sgtl-clock-cko2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ sgtlsound: sound {
+ compatible = "fsl,imx53-cpuvo-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-cpuvo-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <6>;
+ };
+
+ reg_sgtl5k: regulator-sgtl5k {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-sgtl5k";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&pinctrl_usb_otg_vbus>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usbh2_vbus: regulator-usbh2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbh2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbh3_vbus: regulator-usbh3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbh3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh3_vbus>;
+ gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ pwm_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 50000>;
+ brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+ 38 40 43 45 48 51 53 56 58 61 63 66 68 71
+ 73 76 79 81 84 86 89 91 94 96 99 102 104
+ 107 109 112 114 117 119 122 124 127 130
+ 132 135 137 140 142 145 147 150 153 155
+ 158 160 163 165 168 170 173 175 178 181
+ 183 186 188 191 193 196 198 201 204 206
+ 209 211 214 216 219 221 224 226 229 232
+ 234 237 239 242 244 247 249 252 255>;
+ default-brightness-level = <0>;
+ enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "pwm-leds";
+
+ alarm-brightness {
+ pwms = <&pwm1 0 100000>;
+ max-brightness = <255>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ active-delay = <100>;
+ inactive-delay = <10>;
+ wait-delay = <100>;
+ };
+
+ power-gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-button {
+ label = "Power button";
+ gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ touch-lock-key {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch-lock-button {
+ label = "Touch lock button";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F12>;
+ };
+ };
+
+ usbphy2: usbphy2 {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+ clock-names = "main_clk";
+ clock-frequency = <24000000>;
+ clocks = <&clks IMX5_CLK_CKO2>;
+ assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+ assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+ };
+
+ usbphy3: usbphy3 {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ clock-names = "main_clk";
+
+ clock-frequency = <24000000>;
+ clocks = <&clks IMX5_CLK_CKO2>;
+ assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+ assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+ };
+
+ panel-lvds0 {
+ compatible = "nvd,9128";
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&cpu0 {
+ /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+ operating-points = <
+ /* kHz uV */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ >;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
+ &gpio4 10 GPIO_ACTIVE_LOW
+ &gpio4 11 GPIO_ACTIVE_LOW
+ &gpio4 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ spidev0: spi@0 {
+ compatible = "ge,achc";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+
+ spidev1: spi@1 {
+ compatible = "ge,achc";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+
+ gpioxra0: gpio@2 {
+ compatible = "exar,xra1403";
+ reg = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ spi-max-frequency = <1000000>;
+ };
+
+ gpioxra1: gpio@3 {
+ compatible = "exar,xra1403";
+ reg = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ da9053@0 {
+ compatible = "dlg,da9053-aa";
+ reg = <0>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <12 0x8>;
+ spi-max-frequency = <1000000>;
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "BUCKCORE";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "BUCKPRO";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "BUCKMEM";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-name = "BUCKPERI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1_1v3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2_1v3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3_3v3";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4_2v775";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5_3v3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6_1v3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7_2v75";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8_1v8";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9_1v5";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-name = "ldo10_1v3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+
+ i2c4: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_sgtl5k>;
+ VDDIO-supply = <&reg_sgtl5k>;
+ clocks = <&cko2_11M>;
+ status = "okay";
+ };
+ };
+
+ i2c5: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+
+ temp@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
+ mma8453q: accelerometer@1c {
+ compatible = "fsl,mma8453";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <6 0>;
+ interrupt-names = "INT1";
+ };
+
+ mpl3115: pressure-sensor@60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+ };
+
+ i2c6: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c8: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c9: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c10: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c11: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ touchscreen@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <4 0x8>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ status = "okay";
+
+ port@2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "otg";
+ phy_type = "utmi";
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-0 = <&pinctrl_usb_otg>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_vbus>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ fsl,usbphy = <&usbphy2>;
+ vbus-supply = <&reg_usbh2_vbus>;
+ status = "okay";
+};
+
+&usbh3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh3>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ vbus-supply = <&reg_usbh3_vbus>;
+ fsl,usbphy = <&usbphy3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_rev6>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400
+ MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400
+ MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400
+ MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400
+ MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400
+ MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400
+ MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400
+ MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400
+ MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400
+ MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400
+ /* ECSPI1_SS0, must treat as GPIO for EzPort */
+ MX53_PAD_DISP0_DAT23__GPIO5_17 0x400
+ MX53_PAD_KEY_COL2__GPIO4_10 0x0
+ MX53_PAD_KEY_ROW2__GPIO4_11 0x0
+ MX53_PAD_KEY_COL3__GPIO4_12 0x0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0
+ MX53_PAD_EIM_OE__ECSPI2_MISO 0x0
+ MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0
+ MX53_PAD_EIM_RW__GPIO2_26 0x0
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x0
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x0
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0
+ >;
+ };
+
+ pinctrl_hog_rev6: hoggrp {
+ fsl,pins = <
+ /* CKO2 */
+ MX53_PAD_GPIO_3__CCM_CLKO2 0x4
+ /* DEFIB_SYNC_MARKER_IN_IRQ */
+ MX53_PAD_GPIO_5__GPIO1_5 0x0
+ /* ACCELEROMETER_DATA_RDY_N */
+ MX53_PAD_GPIO_6__GPIO1_6 0x0
+ /* TEMPERATURE_ALERT_N */
+ MX53_PAD_GPIO_7__GPIO1_7 0x0
+ /* BAROMETRIC_PRESSURE_DATA_RDY_N */
+ MX53_PAD_GPIO_8__GPIO1_8 0x0
+ /* DOCKING_I2C_INTERFACE_IRQ_N */
+ MX53_PAD_PATA_DATA4__GPIO2_4 0x0
+ /* PWR_OUT_TO_DOCK_FAULT_N */
+ MX53_PAD_PATA_DATA5__GPIO2_5 0x0
+ /* ENABLE_PWR_TO_DOCK_N */
+ MX53_PAD_PATA_DATA6__GPIO2_6 0x0
+ /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
+ MX53_PAD_PATA_DATA7__GPIO2_7 0x0
+ /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
+ MX53_PAD_PATA_DATA12__GPIO2_12 0x0
+ /* DOCK_PRESENT_N */
+ MX53_PAD_PATA_DATA13__GPIO2_13 0x0
+ /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x0
+ /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x0
+ /* RESET_IMX535_ETHERNET_PHY_N */
+ MX53_PAD_EIM_A22__GPIO2_16 0x0
+ /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+ MX53_PAD_EIM_A21__GPIO2_17 0x0
+ /* RESET_I2C1_BUS_SEGMENT_MUX_N */
+ MX53_PAD_EIM_A20__GPIO2_18 0x0
+ /* RESET_IMX535_USB_HOST3_PHY_N */
+ MX53_PAD_EIM_A19__GPIO2_19 0x0
+ /* ESDHC3_EMMC_NAND_RST_N */
+ MX53_PAD_EIM_A18__GPIO2_20 0x0
+ /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
+ MX53_PAD_EIM_A17__GPIO2_21 0x0
+ /* POWER_DOWN_LVDS0_DESERIALIZER_N */
+ MX53_PAD_EIM_A16__GPIO2_22 0x0
+ /* POWER_DOWN_LVDS1_DESERIALIZER_N */
+ MX53_PAD_EIM_LBA__GPIO2_27 0x0
+ /* RESET_DP0_TRANSMITTER_N */
+ MX53_PAD_EIM_EB0__GPIO2_28 0x0
+ /* RESET_DP1_TRANSMITTER_N */
+ MX53_PAD_EIM_EB1__GPIO2_29 0x0
+ /* ENABLE_SPDIF_AUDIO_TO_DP0 */
+ MX53_PAD_EIM_DA0__GPIO3_0 0x0
+ /* ENABLE_SPDIF_AUDIO_TO_DP1 */
+ MX53_PAD_EIM_DA1__GPIO3_1 0x0
+ /* LVDS1_MUX_CTRL */
+ MX53_PAD_EIM_DA2__GPIO3_2 0x0
+ /* LVDS0_MUX_CTRL */
+ MX53_PAD_EIM_DA3__GPIO3_3 0x0
+ /* DP1_TRANSMITTER_IRQ */
+ MX53_PAD_EIM_DA4__GPIO3_4 0x0
+ /* DP0_TRANSMITTER_IRQ */
+ MX53_PAD_EIM_DA5__GPIO3_5 0x0
+ /* USB_RESET_N */
+ MX53_PAD_EIM_DA6__GPIO3_6 0x0
+ /* ENABLE_BATTERY_CHARGER */
+ MX53_PAD_EIM_DA7__GPIO3_7 0x0
+ /* SOFTWARE_CONTROLLED_PWR_CYCLE */
+ MX53_PAD_EIM_DA8__GPIO3_8 0x0
+ /* SOFTWARE_CONTROLLED_POWERDOWN */
+ MX53_PAD_EIM_DA9__GPIO3_9 0x0
+ /* DC_PWR_IN_OK */
+ MX53_PAD_EIM_DA10__GPIO3_10 0x0
+ /* BATT_PRESENT_N */
+ MX53_PAD_EIM_DA11__GPIO3_11 0xe4
+ /* PMIC_IRQ_N */
+ MX53_PAD_EIM_DA12__GPIO3_12 0x0
+ /* PMIC_VDD_FAULT_STATUS_N */
+ MX53_PAD_EIM_DA13__GPIO3_13 0x0
+ /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
+ MX53_PAD_EIM_DA14__GPIO3_14 0x0
+ /* NOT USED - AVAILABLE 3.3V GPIO */
+ MX53_PAD_EIM_DA15__GPIO3_15 0x0
+ /* NOT USED - AVAILABLE 3.3V GPIO */
+ MX53_PAD_EIM_D22__GPIO3_22 0x0
+ /* NOT USED - AVAILABLE 3.3V GPIO */
+ MX53_PAD_EIM_D24__GPIO3_24 0x0
+ /* NBP_PUMP_VALVE_PWR_ENABLE */
+ MX53_PAD_EIM_D25__GPIO3_25 0x0
+ /* NIBP_RESET_N */
+ MX53_PAD_EIM_D26__GPIO3_26 0x0
+ /* LATCHED_OVERPRESSURE_N */
+ MX53_PAD_EIM_D27__GPIO3_27 0x0
+ /* NBP_SBWTCLK */
+ MX53_PAD_EIM_D29__GPIO3_29 0x0
+ /* ENABLE_WIFI_MODULE */
+ MX53_PAD_GPIO_11__GPIO4_1 0x400
+ /* WIFI_MODULE_IRQ_N */
+ MX53_PAD_GPIO_12__GPIO4_2 0x400
+ /* ENABLE_BLUETOOTH_MODULE */
+ MX53_PAD_GPIO_13__GPIO4_3 0x400
+ /* RESET_IMX535_USB_HOST2_PHY_N */
+ MX53_PAD_GPIO_14__GPIO4_4 0x400
+ /* ONKEY_IS_DEPRESSED */
+ MX53_PAD_KEY_ROW3__GPIO4_13 0x0
+ /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
+ MX53_PAD_EIM_WAIT__GPIO5_0 0x0
+ /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
+ MX53_PAD_EIM_A25__GPIO5_2 0x0
+ /* I2C_PCAP_TOUCHSCREEN_IRQ_N */
+ MX53_PAD_EIM_A24__GPIO5_4 0x0
+ /* NOT USED - AVAILABLE 1.8V GPIO */
+ MX53_PAD_DISP0_DAT13__GPIO5_7 0x400
+ /* NOT USED - AVAILABLE 1.8V GPIO */
+ MX53_PAD_DISP0_DAT14__GPIO5_8 0x400
+ /* NOT USED - AVAILABLE 1.8V GPIO */
+ MX53_PAD_DISP0_DAT15__GPIO5_9 0x400
+ /* HOST_CONTROLLED_RESET_TO_LCD_N */
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0
+ /* HOST_CONTROLLED_RESET_TO_PCAP_N */
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x0
+ /* LR_SCAN_CTRL */
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0
+ /* UD_SCAN_CTRL */
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0
+ /* DATA_WIDTH_CTRL */
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x0
+ /* BACKLIGHT_ENABLE */
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x0
+ /* MED_USB_PORT_1_HOST_SELECT */
+ MX53_PAD_EIM_A23__GPIO6_6 0x0
+ /* MED_USB_PORT_2_HOST_SELECT */
+ MX53_PAD_NANDF_CLE__GPIO6_7 0x0
+ /* MED_USB_PORT_3_HOST_SELECT */
+ MX53_PAD_NANDF_ALE__GPIO6_8 0x0
+ /* MED_USB_PORT_4_HOST_SELECT */
+ MX53_PAD_NANDF_WP_B__GPIO6_9 0x0
+ /* MED_USB_PORT_5_HOST_SELECT */
+ MX53_PAD_NANDF_RB0__GPIO6_10 0x0
+ /* MED_USB_PORT_6_HOST_SELECT */
+ MX53_PAD_NANDF_CS0__GPIO6_11 0x0
+ /* MED_USB_PORT_7_HOST_SELECT */
+ MX53_PAD_NANDF_WE_B__GPIO6_12 0x0
+ /* MED_USB_PORT_8_HOST_SELECT */
+ MX53_PAD_NANDF_RE_B__GPIO6_13 0x0
+ /* MED_USB_PORT_TO_IMX_SELECT_0 */
+ MX53_PAD_NANDF_CS1__GPIO6_14 0x0
+ /* MED_USB_PORT_TO_IMX_SELECT_1 */
+ MX53_PAD_NANDF_CS2__GPIO6_15 0x0
+ /* MED_USB_PORT_TO_IMX_SELECT_2 */
+ MX53_PAD_NANDF_CS3__GPIO6_16 0x0
+ /* POWER_AND_BOOT_STATUS_INDICATOR */
+ MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4
+ /* ACTIVATE_ALARM_LIGHT_RED */
+ MX53_PAD_PATA_DIOR__GPIO7_3 0x0
+ /* ACTIVATE_ALARM_LIGHT_YELLOW */
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x0
+ /* ACTIVATE_ALARM_LIGHT_CYAN */
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x0
+ /* RUNNING_ON_BATTERY_INDICATOR_GREEN */
+ MX53_PAD_GPIO_16__GPIO7_11 0x0
+ /* BATTERY_STATUS_INDICATOR_AMBER */
+ MX53_PAD_GPIO_17__GPIO7_12 0x0
+ /* AUDIO_ALARMS_SILENCED_INDICATOR */
+ MX53_PAD_GPIO_18__GPIO7_13 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
+ MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D28__GPIO3_28 0x1e4
+ MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4
+ MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__GPIO3_16 0x1e4
+ MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4
+ MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+ MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__PWM1_PWMO 0x5
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_EIM_D23__UART3_CTS 0x1e4
+ MX53_PAD_EIM_EB3__UART3_RTS 0x1e4
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+ MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
+ fsl,pins = <
+ /* USB_HS_OTG_VBUS_ENABLE */
+ MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ /* USB H2 */
+ MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
+ MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
+ MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
+ MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
+ MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
+ MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
+ MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
+ MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
+ MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180
+ MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180
+ MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180
+ MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5
+ MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180
+ >;
+ };
+
+ pinctrl_usbh2_vbus: usbh2-vbusgrp {
+ fsl,pins = <
+ /* USB_HS_HOST2_VBUS_ENABLE */
+ MX53_PAD_EIM_D31__GPIO3_31 0x0
+ >;
+ };
+
+ pinctrl_usbh3_vbus: usbh3-vbusgrp {
+ fsl,pins = <
+ /* USB_HS_HOST3_VBUS_ENABLE */
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x0
+ >;
+ };
+
+ pinctrl_usbh3: usbh3grp {
+ fsl,pins = <
+ /* USB H3 */
+ MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
+ MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
+ MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
+ MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
+ MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
+ MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
+ MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
+ MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
+ MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5
+ MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180
+ MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180
+ MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180
+ MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180
+ >;
+ };
+
+ pinctrl_usb_otg: usbotggrp {
+ fsl,pins = <
+ /* USB_OTG_FAULT_N */
+ MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 683dcbe27cbd..41a2e2a2b079 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -22,7 +22,7 @@
<0xb0000000 0x20000000>;
};
- display0: display@di0 {
+ display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
@@ -172,7 +172,7 @@
>;
};
- led_pin_gpio7_7: led_gpio7_7@0 {
+ led_pin_gpio7_7: led_gpio7_7 {
fsl,pins = <
MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
>;
@@ -314,7 +314,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 33cb64fc8372..51f4a42a55e2 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -232,12 +232,12 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
- magnetometer: mag3110@0e {
+ magnetometer: mag3110@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 0ecb43d88522..7eb53e48c2f4 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -1,12 +1,42 @@
/*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -24,7 +54,7 @@
};
soc {
- display: display@di0 {
+ display: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
@@ -173,28 +203,24 @@
default-brightness-level = <50>;
};
- regulators {
- reg_lcd_pwr: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "LCD POWER";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
+ reg_lcd_pwr: regulator-lcd-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
- reg_lcd_reset: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "LCD RESET";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
+ reg_lcd_reset: regulator-lcd-reset {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
};
};
@@ -203,7 +229,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_2v5>;
@@ -228,7 +254,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
- interrupts = <26 0>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
wakeup-source;
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 3cf682a681f4..f2b2ad3ce9e5 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -1,6 +1,42 @@
/*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
@@ -63,82 +99,46 @@
default-brightness-level = <50>;
};
- regulators {
- reg_lcd_pwr0: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "LVDS0 POWER";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
-
- reg_lcd_pwr1: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "LVDS1 POWER";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
+ reg_lcd_pwr0: regulator-lvds0-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "LVDS0 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
};
-};
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- touchscreen2: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti2>;
- interrupt-parent = <&gpio3>;
- interrupts = <23 0>;
- wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
- wakeup-source;
+ reg_lcd_pwr1: regulator-lvds1-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "LVDS1 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
};
};
&i2c3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_2v5>;
VDDIO-supply = <&reg_3v3>;
clocks = <&mclk>;
};
-
- touchscreen1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti1>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
};
&iomuxc {
imx53-tx53-x13x {
- pinctrl_i2c2: i2c2-grp1 {
- fsl,pins = <
- MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
- MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
- >;
- };
-
pinctrl_lvds0: lvds0grp {
fsl,pins = <
MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 7807c1fa1101..71b58b6933e1 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,15 +1,45 @@
/*
- * Copyright 2012 <LW@KARO-electronics.de>
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
* based on imx53-qsb.dts
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx53.dtsi"
@@ -66,61 +96,50 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_2v5: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
+ reg_2v5: regulator-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
- reg_3v3: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- reg_can_xcvr: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "CAN XCVR";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
- };
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
- reg_usbh1_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1_vbus>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usbh1_vbus: regulator-usbh1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usbotg_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usbotg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_vbus>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usbotg_vbus: regulator-usbotg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
@@ -208,14 +227,17 @@
phy0: ethernet-phy@0 {
interrupt-parent = <&gpio2>;
- interrupts = <4>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
device_type = "ethernet-phy";
};
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-0 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
clock-frequency = <400000>;
status = "okay";
@@ -225,7 +247,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ds1339>;
interrupt-parent = <&gpio4>;
- interrupts = <20 0>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ trickle-resistor-ohms = <250>;
+ trickle-diode-disable;
};
};
@@ -368,15 +392,29 @@
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
- MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
+ MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__GPIO3_21 0x400001e6
+ MX53_PAD_EIM_D28__GPIO3_28 0x400001e6
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4
+ MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpiogrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_3__GPIO1_3 0x400001e6
+ MX53_PAD_GPIO_6__GPIO1_6 0x400001e6
>;
};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index fc51b87ad208..25c78f19826c 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -130,7 +130,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8bf0d89cdd35..589a67c5f796 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -80,7 +80,7 @@
ports = <&ipu_di0>, <&ipu_di1>;
};
- tzic: tz-interrupt-controller@0fffc000 {
+ tzic: tz-interrupt-controller@fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
@@ -299,14 +299,14 @@
reg = <0x53f00000 0x60>;
};
- usbphy0: usbphy@0 {
+ usbphy0: usbphy-0 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
status = "okay";
};
- usbphy1: usbphy@1 {
+ usbphy1: usbphy-1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
index 0677625463d6..5f0d196495d0 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -52,7 +52,7 @@
reg = <0x10000000 0x40000000>;
};
- display0: display@di0 {
+ display0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index 32a812b1839e..cc418cecabdb 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -32,7 +32,7 @@
};
soc {
- display0: display@di0 {
+ display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index 15203f0e9725..126ff964eded 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -21,7 +21,7 @@
};
soc {
- display0: display@di0 {
+ display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 26541538562c..5705ebee0595 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -88,7 +88,7 @@
};
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 6de83c72bd72..971f9fc39c66 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -57,3 +57,12 @@
&can2 {
status = "okay";
};
+
+&i2c1 {
+ max11801: touchscreen@48 {
+ compatible = "maxim,max11801";
+ reg = <0x48>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 275c6c05219d..23e108204e1e 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -157,7 +157,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -165,7 +165,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- pmic: pf0100@08 {
+ pmic: pf0100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index aac42ac465b6..51a9bb9d6bc2 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -116,14 +62,14 @@
xceiver-supply = <&reg_3v3>;
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
&reg_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 000000000000..fc23b4d291a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
index ff8f7b1c4282..9eb2ef17339c 100644
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8034 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
- aliases {
- display = &display;
- ipu1 = &ipu1;
- };
-
cpus {
/delete-node/ cpu@1;
};
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -227,11 +68,3 @@
MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
>;
};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 000000000000..4101c6597721
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
index f988950e9443..a5532ecc18c5 100644
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8035 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
- aliases {
- display = &display;
- ipu1 = &ipu1;
- };
-
cpus {
/delete-node/ cpu@1;
};
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -220,14 +61,6 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index d1f1298ec55a..67ed0452f5de 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,166 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 000000000000..d34189fc52d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
index 4d3204a56f46..7030b2654bbd 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,169 +42,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8033 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -215,14 +57,6 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 000000000000..aef5fcc42904
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index 5e0c6bb49f37..5342f2f5a8a8 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,137 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6U-811x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <&reg_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-};
-
-&i2c3 {
- polytouch2: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
-&kpp {
- status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel@1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "disabled";
-
- display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
index b9a783f7160e..c4588fb0bf6f 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -40,216 +40,9 @@
*/
/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
/ {
- model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
- compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-};
-
-&can1 {
- status = "disabled";
-};
-
-&can2 {
- xceiver-supply = <&reg_3v3>;
-};
-
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
-&kpp {
- status = "disabled"; /* pads partially clash with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds0_timing1>;
-
- lvds0_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds0_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds0_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel@1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds1_timing2>;
-
- lvds1_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds1_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds1_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
+ model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
new file mode 100644
index 000000000000..aa4d4faaaec4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Dual Lite Board revD1";
+ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 8475e6cc59ac..4d693a75ce98 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -60,35 +60,35 @@
};
soc {
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- aips1: aips-bus@02000000 {
- iomuxc: iomuxc@020e0000 {
+ aips1: aips-bus@2000000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6dl-iomuxc";
};
- pxp: pxp@020f0000 {
+ pxp: pxp@20f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
- epdc: epdc@020f4000 {
+ epdc: epdc@20f4000 {
reg = <0x020f4000 0x4000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
- lcdif: lcdif@020f8000 {
+ lcdif: lcdif@20f8000 {
reg = <0x020f8000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
};
- aips2: aips-bus@02100000 {
- i2c4: i2c@021f8000 {
+ aips2: aips-bus@2100000 {
+ i2c4: i2c@21f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 4bbfe3d61027..8b56656e53da 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -76,7 +76,7 @@
};
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index a35c7a54ad3b..27dc0fc686a9 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -77,7 +77,7 @@
};
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 60d33e99de76..40b2c67fe7af 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -76,7 +76,7 @@
};
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 1015e55ca8f7..b915837bbb5f 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -165,7 +165,7 @@
#size-cells = <0>;
reg = <0x3>;
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&mclk>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index fe6ab0aa34f9..bc7587c383f6 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -77,8 +77,7 @@
regulator-name = "regulator-pcie-power-on-gpio";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
};
reg_usb_h1_vbus: usb_h1_vbus {
@@ -362,7 +361,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
- vdd-supply = <&reg_pcie_power_on_gpio>;
+ vpcie-supply = <&reg_pcie_power_on_gpio>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 000000000000..16658b76fc4e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+ compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
new file mode 100644
index 000000000000..4084de43d4d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ model = "Liebherr (LWN) display5 i.MX6 Quad Board";
+ compatible = "lwn,display5", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm2 0 5000000 0>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100 101 102 103 104 105 106 107 108 109
+ 110 111 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127 128 129
+ 130 131 132 133 134 135 136 137 138 139
+ 140 141 142 143 144 145 146 147 148 149
+ 150 151 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167 168 169
+ 170 171 172 173 174 175 176 177 178 179
+ 180 181 182 183 184 185 186 187 188 189
+ 190 191 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207 208 209
+ 210 211 212 213 214 215 216 217 218 219
+ 220 221 222 223 224 225 226 227 228 229
+ 230 231 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247 248 249
+ 250 251 252 253 254 255>;
+ default-brightness-level = <250>;
+ enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_lvds: regulator-lvds {
+ compatible = "regulator-fixed";
+ regulator-name = "lvds_ppen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lvds>;
+ gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbh1_vbus: usb-h1-vbus {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-enable-ramp-delay = <300000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ label = "tfa9879-mono";
+
+ simple-audio-card,dai-link {
+ /* DAC */
+ format = "i2s";
+ bitclock-master = <&dailink_master>;
+ frame-master = <&dailink_master>;
+
+ dailink_master: cpu {
+ sound-dai = <&ssi2>;
+ };
+ codec {
+ sound-dai = <&codec>;
+ };
+ };
+ };
+
+ panel: panel-lvds0 {
+ backlight = <&backlight_lvds>;
+ power-supply = <&reg_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(5) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(5) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(5)
+ >;
+ };
+
+ aud6 {
+ fsl,audmux-port = <5>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_RFSEL(8) |
+ IMX_AUDMUX_V2_PTCR_RCSEL(8) |
+ IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(1) |
+ IMX_AUDMUX_V2_PTCR_RFSDIR |
+ IMX_AUDMUX_V2_PTCR_RCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+ status = "okay";
+
+ s25fl256s: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "SPL (spi)";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+ partition@1 {
+ label = "u-boot (spi)";
+ reg = <0x20000 0x100000>;
+ read-only;
+ };
+ partition@2 {
+ label = "uboot-env (spi)";
+ reg = <0x120000 0x10000>;
+ };
+ partition@3 {
+ label = "uboot-envr (spi)";
+ reg = <0x130000 0x10000>;
+ };
+ partition@4 {
+ label = "linux-recovery (spi)";
+ reg = <0x140000 0x800000>;
+ };
+ partition@5 {
+ label = "swupdate-fitImg (spi)";
+ reg = <0x940000 0x400000>;
+ };
+ partition@6 {
+ label = "swupdate-initramfs (spi)";
+ reg = <0xD40000 0x800000>;
+ };
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-handle = <&ethernet_phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet_phy0: ethernet-phy@0 {
+ compatible = "marvell,88E1510";
+ device_type = "ethernet-phy";
+ /* Set LED0 control: */
+ /* On - Link, Blink - Activity, Off - No Link */
+ marvell,reg-init = <3 0x10 0 0x1011>;
+ max-speed = <100>;
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: tfa9879@6C {
+ #sound-dai-cells = <0>;
+ compatible = "nxp,tfa9879";
+ reg = <0x6C>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pwm2 {
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usbh1_vbus>;
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ /* I2S OUTPUT AUD6*/
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
+ MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
+ MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
+ >;
+ };
+
+ pinctrl_backlight: dispgrp {
+ fsl,pins = <
+ /* BLEN_OUT */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi2_cs: ecspi2csgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3csgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_lvds: reqlvdsgrp {
+ fsl,pins = <
+ /* LVDS_PPEN_OUT */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__USB_H1_OC 0x030b0
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1_vbus_grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 33eb7f180995..f0316ea96898 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -139,7 +139,7 @@
&pinctrl_pfuze>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
interrupt-parent = <&gpio3>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 9dbeea05a949..29adaa7c72f8 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -211,7 +211,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -322,7 +322,7 @@
reg = <0x1c>;
};
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -330,7 +330,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- touchscreen: egalax_ts@04 {
+ touchscreen: egalax_ts@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
@@ -392,127 +392,124 @@
};
&iomuxc {
- imx6q-gw5400-a {
-
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
- MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
- MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
- MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
+ >;
+ };
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
- >;
- };
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
+ >;
+ };
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
+ >;
+ };
- pinctrl_pps: ppsgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
- >;
- };
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index 8f9252889971..a3269f57df2b 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -185,7 +185,7 @@
reg = <0x68>;
};
- sgtl5000: sgtl5000@0a {
+ sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
pinctrl-names = "default";
@@ -195,7 +195,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- tc358743: tc358743@0f {
+ tc358743: tc358743@f {
compatible = "toshiba,tc358743";
reg = <0x0f>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index e451b4ceb4d8..b81f48c6a8c6 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -47,30 +47,6 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-audio-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&i2c3 {
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
- VDDA-supply = <&reg_2p5v>;
- VDDIO-supply = <&reg_3p3v>;
- VDDD-supply = <&reg_1p8v>;
- };
};
&sata {
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index eedbe737420c..cab36f48d5f1 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -121,7 +121,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pfuze100: pmic@08 {
+ pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index d83cfb6ec598..7d7dc59507cf 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -158,7 +158,6 @@
regulator-max-microvolt = <1500000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
};
reg_sata: regulator-sata {
@@ -255,7 +254,7 @@
reg = <0x68>;
};
- sbs_battery: bq20z75@0b {
+ sbs_battery: bq20z75@b {
compatible = "sbs,sbs-battery";
reg = <0x0b>;
sbs,i2c-retry-count = <50>;
@@ -295,7 +294,7 @@
pinctrl-0 = <&pinctrl_i2c2_novena>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -447,6 +446,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_novena>;
reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <&reg_pcie>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
new file mode 100644
index 000000000000..1effb58f304c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -0,0 +1,693 @@
+/*
+ * Copyright (C) 2017 NutsBoard.Org
+ *
+ * Author: Wig Cheng <onlywig@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+ model = "NutsBoard i.MX6 Quad Pistachio board";
+ compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory: memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ wlan_en_reg: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+ brightness-levels = <
+ 0 /*1 2 3 4 5 6*/ 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <94>;
+ status = "okay";
+ };
+
+ panel {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ ar1021@4d {
+ compatible = "microchip,ar1021-i2c";
+ reg = <0x4d>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /*LCD power*/
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /*backlight power*/
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /*SD3 CD pin*/
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /*codec power*/
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /*touch reset*/
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b01 /*touch irq*/
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0/*backlight pwr*/
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /*gpio 5V_1*/
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 /*gpio 5V_2*/
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /*gpio 5V_3*/
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /*gpio 5V_4*/
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 /*AUX_5V_EN*/
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 /*AUX_5VB_EN*/
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 /*AUX_3V3_EN*/
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /*I2C expander pwr*/
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ /* AR8035 reset */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x130b0
+ /* AR8035 interrupt */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
+ /* AR8035 pin strapping: IO voltage: pull up */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ /* AR8035 pin strapping: PHYADDR#0: pull down */
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
+ /* AR8035 pin strapping: PHYADDR#1: pull down */
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
+ /* AR8035 pin strapping: MODE#1: pull up */
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ /* AR8035 pin strapping: MODE#3: pull up */
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ /* AR8035 pin strapping: MODE#0: pull down */
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_cec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 /* sys_mclk */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x130b0 /*headphone det*/
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 /*microphone det*/
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x15059 /*BT_EN*/
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x15059 /*WL_EN_LDO*/
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x15059 /*WL_EN*/
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x15059 /*WL_IRQ*/
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b00
+ >;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ keep-power-in-suspend;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ vmmc-supply = <&wlan_en_reg>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ non-removable;
+ cap-power-off-card;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&wdog1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 06f492e17ca7..a3cd7afac20a 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -158,7 +158,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- sgtl5000: sgtl5000@0a {
+ sgtl5000: sgtl5000@a {
clocks = <&clks IMX6QDL_CLK_CKO>;
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index 71746edc2ee9..ac3050a835e5 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -116,14 +62,14 @@
xceiver-supply = <&reg_3v3>;
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
&reg_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index f9cd21a41a79..4ee860b626ff 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,166 +42,13 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
- model = "Ka-Ro electronics TX6Q-1010 Module";
+ model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
+&ipu2 {
+ status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 959ff3fb7304..a773f252816c 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -124,14 +70,14 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
&reg_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index b49133d25d80..0a4daec8d3ad 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,164 +42,11 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -210,14 +57,15 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
+&ipu2 {
+ status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
+ non-removable;
no-1-8-v;
fsl,wp-controller;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 000000000000..9ffbb0fe7df8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
index 7c152e32758c..cb2fcb4896c6 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,169 +42,11 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1036 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display@di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -215,18 +57,10 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&ipu2 {
status = "disabled";
};
-&reg_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 000000000000..d43a5d8f1749
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 0433e220a931..f7b0acb65352 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,141 +42,17 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
- model = "Ka-Ro electronics TX6Q-1110 Module";
+ model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <&reg_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-};
-
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
};
-&kpp {
- status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel@1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "disabled";
-
- display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
+&ipu2 {
+ status = "disabled";
};
&sata {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
index d78b129d01ea..387edf2b3f96 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -40,225 +40,9 @@
*/
/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
- compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &lvds0;
- ipu1 = &ipu2;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <&reg_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-};
-
-&can1 {
- status = "disabled";
-};
-
-&can2 {
- xceiver-supply = <&reg_3v3>;
-};
-
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
-&ipu2 {
- status = "disabled";
-};
-
-&kpp {
- status = "disabled"; /* pads partially clash with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds0_timing1>;
-
- lvds0_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds0_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds0_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel@1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds1_timing2>;
-
- lvds1_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds1_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds1_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 16d5be1aeb3c..f5d9c34b0d39 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -188,6 +188,8 @@
/delete-node/&hdmi_mux_1;
&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmicec>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
@@ -211,6 +213,12 @@
>;
};
+ pinctrl_hdmicec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
pinctrl_hpd: hpdgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
new file mode 100644
index 000000000000..e87ddb168669
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Quad Board revD1";
+ compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 90a741732f60..bc581aa5cf17 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -79,15 +79,15 @@
};
soc {
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- aips-bus@02000000 { /* AIPS1 */
- spba-bus@02000000 {
- ecspi5: ecspi@02018000 {
+ aips-bus@2000000 { /* AIPS1 */
+ spba-bus@2000000 {
+ ecspi5: ecspi@2018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -102,12 +102,12 @@
};
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6q-iomuxc";
};
};
- sata: sata@02200000 {
+ sata: sata@2200000 {
compatible = "fsl,imx6q-ahci";
reg = <0x02200000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -118,7 +118,7 @@
status = "disabled";
};
- gpu_vg: gpu@02204000 {
+ gpu_vg: gpu@2204000 {
compatible = "vivante,gc";
reg = <0x02204000 0x4000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -128,7 +128,7 @@
power-domains = <&pd_pu>;
};
- ipu2: ipu@02800000 {
+ ipu2: ipu@2800000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ipu";
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index ea339fa58f4a..e80fdca585f8 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -222,7 +222,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -313,7 +313,7 @@
};
};
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 9cd2a7477ed7..829a47938179 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -54,7 +54,7 @@
stdout-path = &uart4;
};
- display@di0 {
+ disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
@@ -209,7 +209,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index ad84eddb6836..fc66bbfd6796 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -167,7 +167,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -248,7 +248,7 @@
};
};
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 885556260bd0..dea8fc43c692 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -332,175 +332,173 @@
};
&iomuxc {
- imx6qdl-gw51xx {
- pinctrl_adv7180: adv7180grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
- MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
- >;
- };
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
+ >;
+ };
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_ipu1_csi0: ipu1csi0grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
- MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
- MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
- MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
- MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
- MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
- MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
- MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
- MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
- MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
- MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
- >;
- };
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
- pinctrl_pps: ppsgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
- >;
- };
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm4: pwm4grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 115d706228ef..363a44394dad 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -303,7 +303,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -311,7 +311,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- touchscreen: egalax_ts@04 {
+ touchscreen: egalax_ts@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
@@ -423,213 +423,211 @@
};
&iomuxc {
- imx6qdl-gw52xx {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
- MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
- MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
- MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
+ >;
+ };
- pinctrl_ecspi3: escpi3grp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
- MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
- MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
- MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
- >;
- };
+ pinctrl_ecspi3: escpi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
+ >;
+ };
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
+ >;
+ };
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
- >;
- };
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
- pinctrl_pps: ppsgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
- >;
- };
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm4: pwm4grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
- >;
- };
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
- >;
- };
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 24be7965056c..c75385c0cad0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -294,7 +294,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -302,7 +302,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- touchscreen: egalax_ts@04 {
+ touchscreen: egalax_ts@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
@@ -415,205 +415,203 @@
};
&iomuxc {
- imx6qdl-gw53xx {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
- MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
- MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
- MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
+ >;
+ };
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
- >;
- };
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
- pinctrl_pps: ppsgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
- >;
- };
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm4: pwm4grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
- MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
- >;
- };
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
- >;
- };
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4594b2279169..eab75f3dbaf3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -223,7 +223,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -331,7 +331,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -339,7 +339,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- touchscreen: egalax_ts@04 {
+ touchscreen: egalax_ts@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
@@ -468,221 +468,219 @@
};
&iomuxc {
- imx6qdl-gw54xx {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
- MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
- MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
- MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
+ >;
+ };
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
- pinctrl_ecspi2: escpi2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
- MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
- MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
- MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
- >;
- };
+ pinctrl_ecspi2: escpi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
+ >;
+ };
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
- >;
- };
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
+ >;
+ };
- pinctrl_pps: ppsgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
- >;
- };
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm4_backlight: pwm4grpbacklight {
- fsl,pins = <
- /* LVDS_PWM J6.5 */
- MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm4_backlight: pwm4grpbacklight {
+ fsl,pins = <
+ /* LVDS_PWM J6.5 */
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm4_dio: pwm4grpdio {
- fsl,pins = <
- /* DIO3 J16.4 */
- MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm4_dio: pwm4grpdio {
+ fsl,pins = <
+ /* DIO3 J16.4 */
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
- >;
- };
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
- MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
- >;
- };
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 405b40310ddf..30d4662d4480 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -320,110 +320,108 @@
};
&iomuxc {
- imx6qdl-gw51xx {
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
- >;
- };
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 67613dd7cc92..c67c10605070 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -270,105 +270,103 @@
};
&iomuxc {
- imx6qdl-gw552x {
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
- >;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
- >;
- };
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
- pinctrl_pwm2: pwm2grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
- >;
- };
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 988334c889eb..37c07c0748aa 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -138,7 +138,7 @@
};
/* Pro baseboard model */
- sgtl5000: sgtl5000@0a {
+ sgtl5000: sgtl5000@a {
clocks = <&clks IMX6QDL_CLK_CKO>;
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 7ca291e9dbdb..b6220d62f6de 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -41,6 +41,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
memory {
@@ -118,17 +119,77 @@
clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
clock-names = "refclk";
};
-};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack",
+ "Speaker", "Line Out Jack",
+ "Speaker", "Ext Spk";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
+
+ audmux_ssi1 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_SYN)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+ >;
+ };
+
+ audmux_aud4 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
};
&fec {
@@ -174,6 +235,16 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <&reg_2p5v>;
+ VDDIO-supply = <&reg_3p3v>;
+ VDDD-supply = <&reg_1p8v>;
+ };
};
&pcie {
@@ -184,6 +255,7 @@
};
&ssi1 {
+ fsl,mode = "i2s-slave";
status = "okay";
};
@@ -270,6 +342,20 @@
>;
};
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 56d0c5d21cd0..a1b469c142f1 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -42,6 +42,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
memory {
@@ -55,6 +56,25 @@
default-brightness-level = <7>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+
+ reg_2p5v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -87,6 +107,59 @@
#clock-cells = <0>;
clock-frequency = <25000000>; /* 25MHz for example */
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack",
+ "Speaker", "Line Out Jack",
+ "Speaker", "Ext Spk";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+
+ audmux_ssi1 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_SYN)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+ >;
+ };
+
+ audmux_aud4 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+ >;
+ };
};
&can1 {
@@ -141,6 +214,16 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <&reg_2p5v>;
+ VDDIO-supply = <&reg_3p3v>;
+ VDDD-supply = <&reg_1p8v>;
+ };
};
&pwm3 {
@@ -149,6 +232,11 @@
status = "okay";
};
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
@@ -178,6 +266,15 @@
};
&iomuxc {
+ pinctrl_audmux: audmux {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 6b81580623ff..4cc4e23cf99c 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -255,7 +255,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
@@ -279,7 +279,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- touchscreen@04 {
+ touchscreen@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index b63134e3b51a..3a77f0fedfce 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -256,7 +256,7 @@
status = "okay";
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
@@ -397,7 +397,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
@@ -429,7 +429,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- touchscreen@04 {
+ touchscreen@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index a24e4f1911ab..40942d6b94b3 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -120,7 +120,7 @@
};
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
@@ -315,7 +315,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
@@ -347,7 +347,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- touchscreen@04 {
+ touchscreen@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index d309a4d0eb08..4bdf29169d2a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -197,7 +197,7 @@
status = "okay";
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
@@ -313,7 +313,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -340,7 +340,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- touchscreen@04 {
+ touchscreen@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 5cf90c24c707..6e9549ff11da 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -121,7 +121,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 6a7594e5d183..4fa2fac3877b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -244,7 +244,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 756c5054f047..35de7adc997b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -221,7 +221,7 @@
status = "okay";
};
- lcd_display: display@di0 {
+ lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
@@ -350,7 +350,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index b72b6fa47580..0a50705b9c18 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -67,7 +67,6 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 19 0>;
- regulator-always-on;
enable-active-high;
};
};
@@ -214,6 +213,8 @@
};
&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_cec>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
@@ -304,7 +305,7 @@
};
};
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -411,7 +412,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- egalax_ts@04 {
+ egalax_ts@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio6>;
@@ -486,6 +487,12 @@
>;
};
+ pinctrl_hdmi_cec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
@@ -651,6 +658,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <&reg_pcie>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 000000000000..5102fc47380b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd1_pwr>;
+ enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ turn-on-delay-ms = <35>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "edt,etm0700g0dh6";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd0_pwr>;
+ enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ backlight = <&backlight>;
+ bus-format-override = "rgb24";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+ };
+
+ display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ u-boot,panel-name = "edt,et057090dhu";
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ u-boot,panel-name = "edt,et0350g0dh6";
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ u-boot,panel-name = "edt,et0430g0dh6";
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ u-boot,panel-name = "edt,etm0700g0dh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ CoMTFT { /* same as ET0700 but with inverted pixel clock */
+ u-boot,panel-name = "edt,etm0700g0edh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 000000000000..2ca2eb37e14f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <&reg_lcd0_pwr>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <&reg_lcd1_pwr>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ lvds0_panel: lvds0-panel {
+ compatible = "nlt,nl12880bc20-spwg-24";
+ backlight = <&backlight0>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ lvds1_panel: lvds1-panel {
+ compatible = "nlt,nl12880bc20-spwg-24";
+ backlight = <&backlight1>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&kpp {
+ status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+
+ display-timings {
+ hsd100pxn1 {
+ u-boot,panel-name = "hannstar,hsd100pxn1";
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vfront-porch = <12>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ nl12880bc20 {
+ u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <60>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0700 {
+ u-boot,panel-name = "edt,etm0700g0dh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ u-boot,panel-name = "edt,et057090dhu";
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+
+ display-timings {
+ hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vfront-porch = <12>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <60>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&reg_lcd0_pwr {
+ status = "okay";
+};
+
+&reg_lcd1_pwr {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 000000000000..4c4e2e1a931f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ backlight0 {
+ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <&reg_lcd1_pwr>;
+ };
+
+ backlight1 {
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <&reg_lcd1_pwr>;
+ };
+
+ lcd-panel {
+ compatible = "edt,et057090dhu";
+ bus-format-override = "rgb24";
+ pixelclk-active = <0>;
+ };
+
+ lvds0-panel {
+ compatible = "edt,etml1010g0dka";
+ bus-format-override = "spwg-18";
+ pixelclk-active = <0>;
+ };
+
+ lvds1-panel {
+ compatible = "edt,etml1010g0dka";
+ bus-format-override = "spwg-18";
+ pixelclk-active = <0>;
+ };
+};
+
+&can1 {
+ status = "disabled";
+};
+
+&can2 {
+ xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+ /*
+ * The backup voltage of the module internal RTC is not wired
+ * by default on the MB7, so disable that RTC chip.
+ */
+ status = "disabled";
+};
+
+&i2c3 {
+ rtc: mcp7940x@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
+
+&reg_lcd0_pwr {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index c6bec97fbeaf..6abb66cd7d4a 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -43,6 +43,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
aliases {
@@ -145,7 +146,7 @@
pinctrl-0 = <&pinctrl_lcd0_pwr>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
+ status = "disabled";
};
reg_lcd1_pwr: regulator-lcd1-pwr {
@@ -157,7 +158,7 @@
pinctrl-0 = <&pinctrl_lcd1_pwr>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
+ status = "disabled";
};
reg_usbh1_vbus: regulator-usbh1-vbus {
@@ -183,24 +184,56 @@
};
sound {
- compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "sgtl5000-audio";
+ compatible = "karo,imx6qdl-tx6-sgtl5000",
+ "simple-audio-card";
+ simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
- ssi-controller = <&ssi1>;
- audio-codec = <&sgtl5000>;
- audio-routing =
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <5>;
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
};
};
&audmux {
status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ pins5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ >;
+ };
};
&can1 {
@@ -241,7 +274,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
+ pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>,
@@ -249,6 +282,7 @@
clock-names = "ipg", "ahb", "ptp", "enet_out";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+ phy-reset-post-delay = <10>;
phy-handle = <&etnphy>;
phy-supply = <&reg_3v3_etn>;
status = "okay";
@@ -261,8 +295,9 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_mdio>;
- interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_etnphy_int>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
};
};
@@ -276,25 +311,34 @@
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
clock-frequency = <400000>;
status = "okay";
ds1339: rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
+ trickle-resistor-ohms = <250>;
+ trickle-diode-disable;
};
};
&i2c3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
clock-frequency = <400000>;
status = "okay";
- sgtl5000: sgtl5000@0a {
+ sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
reg = <0x0a>;
VDDA-supply = <&reg_2v5>;
VDDIO-supply = <&reg_3v3>;
@@ -332,8 +376,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
>;
};
@@ -451,12 +493,24 @@
>;
};
+ pinctrl_etnphy_int: etnphy-intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
+ >;
+ };
+
pinctrl_etnphy_power: etnphy-pwrgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
>;
};
+ pinctrl_etnphy_rst: etnphy-rstgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
+ >;
+ };
+
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
@@ -504,6 +558,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -511,6 +572,13 @@
>;
};
+ pinctrl_i2c3_gpio: i2c3-gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ >;
+ };
+
pinctrl_kpp: kppgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 000000000000..6d8d9ca96646
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+ reg_eth_phy: regulator-eth-phy {
+ compatible = "regulator-fixed";
+ regulator-name = "ETH_PHY";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pmic: pfuze100@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&fec {
+ phy-supply = <&reg_eth_phy>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-wandboard {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+ >;
+ };
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index b4fa7f1d63da..ed96d7b5feab 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -82,7 +82,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index eeb7679fd348..7812fbac963c 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -390,7 +390,7 @@
clock-frequency = <100000>;
status = "okay";
- pmic@08 {
+ pmic@8 {
compatible = "fsl,pfuze100";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pfuze100_irq>;
@@ -543,7 +543,7 @@
rmi4-f01@1 {
reg = <0x1>;
- syna,nosleep-mode = <1>;
+ syna,nosleep-mode = <2>;
};
rmi4-f11@11 {
@@ -728,6 +728,7 @@
&usbh1 {
vbus-supply = <&reg_5p0v_main>;
+ disable-over-current;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 8884b4a3cafb..1ce4eabf0590 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -87,7 +87,7 @@
interrupt-parent = <&gpc>;
ranges;
- dma_apbh: dma-apbh@00110000 {
+ dma_apbh: dma-apbh@110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,7 +100,7 @@
clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@00112000 {
+ gpmi: gpmi-nand@112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -120,7 +120,7 @@
status = "disabled";
};
- hdmi: hdmi@0120000 {
+ hdmi: hdmi@120000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00120000 0x9000>;
@@ -148,7 +148,7 @@
};
};
- gpu_3d: gpu@00130000 {
+ gpu_3d: gpu@130000 {
compatible = "vivante,gc";
reg = <0x00130000 0x4000>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -159,7 +159,7 @@
power-domains = <&pd_pu>;
};
- gpu_2d: gpu@00134000 {
+ gpu_2d: gpu@134000 {
compatible = "vivante,gc";
reg = <0x00134000 0x4000>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -169,7 +169,7 @@
power-domains = <&pd_pu>;
};
- timer@00a00600 {
+ timer@a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
@@ -177,7 +177,7 @@
clocks = <&clks IMX6QDL_CLK_TWD>;
};
- intc: interrupt-controller@00a01000 {
+ intc: interrupt-controller@a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -186,7 +186,7 @@
interrupt-parent = <&intc>;
};
- L2: l2-cache@00a02000 {
+ L2: l2-cache@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -229,21 +229,21 @@
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
- aips-bus@02000000 { /* AIPS1 */
+ aips-bus@2000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba-bus@02000000 {
+ spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -263,7 +263,7 @@
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: ecspi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -277,7 +277,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: ecspi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -291,7 +291,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: ecspi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -305,7 +305,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: ecspi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -319,7 +319,7 @@
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -331,7 +331,7 @@
status = "disabled";
};
- esai: esai@02024000 {
+ esai: esai@2024000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx35-esai";
reg = <0x02024000 0x4000>;
@@ -347,7 +347,7 @@
status = "disabled";
};
- ssi1: ssi@02028000 {
+ ssi1: ssi@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6q-ssi",
"fsl,imx51-ssi";
@@ -363,7 +363,7 @@
status = "disabled";
};
- ssi2: ssi@0202c000 {
+ ssi2: ssi@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6q-ssi",
"fsl,imx51-ssi";
@@ -379,7 +379,7 @@
status = "disabled";
};
- ssi3: ssi@02030000 {
+ ssi3: ssi@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6q-ssi",
"fsl,imx51-ssi";
@@ -395,7 +395,7 @@
status = "disabled";
};
- asrc: asrc@02034000 {
+ asrc: asrc@2034000 {
compatible = "fsl,imx53-asrc";
reg = <0x02034000 0x4000>;
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -420,12 +420,12 @@
status = "okay";
};
- spba@0203c000 {
+ spba@203c000 {
reg = <0x0203c000 0x4000>;
};
};
- vpu: vpu@02040000 {
+ vpu: vpu@2040000 {
compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -439,11 +439,11 @@
iram = <&ocram>;
};
- aipstz@0207c000 { /* AIPSTZ1 */
+ aipstz@207c000 { /* AIPSTZ1 */
reg = <0x0207c000 0x4000>;
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
@@ -454,7 +454,7 @@
status = "disabled";
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
@@ -465,7 +465,7 @@
status = "disabled";
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
@@ -476,7 +476,7 @@
status = "disabled";
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
@@ -487,7 +487,7 @@
status = "disabled";
};
- can1: flexcan@02090000 {
+ can1: flexcan@2090000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -497,7 +497,7 @@
status = "disabled";
};
- can2: flexcan@02094000 {
+ can2: flexcan@2094000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -507,7 +507,7 @@
status = "disabled";
};
- gpt: gpt@02098000 {
+ gpt: gpt@2098000 {
compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -517,7 +517,7 @@
clock-names = "ipg", "per", "osc_per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -528,7 +528,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -539,7 +539,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -550,7 +550,7 @@
#interrupt-cells = <2>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -561,7 +561,7 @@
#interrupt-cells = <2>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -572,7 +572,7 @@
#interrupt-cells = <2>;
};
- gpio6: gpio@020b0000 {
+ gpio6: gpio@20b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -583,7 +583,7 @@
#interrupt-cells = <2>;
};
- gpio7: gpio@020b4000 {
+ gpio7: gpio@20b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
@@ -594,7 +594,7 @@
#interrupt-cells = <2>;
};
- kpp: kpp@020b8000 {
+ kpp: kpp@20b8000 {
compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -602,14 +602,14 @@
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: wdog@20bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_DUMMY>;
};
- wdog2: wdog@020c0000 {
+ wdog2: wdog@20c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +617,7 @@
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: ccm@20c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -625,7 +625,7 @@
#clock-cells = <1>;
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
@@ -737,7 +737,7 @@
clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -745,7 +745,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -753,7 +753,7 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -775,17 +775,17 @@
};
};
- epit1: epit@020d0000 { /* EPIT1 */
+ epit1: epit@20d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 { /* EPIT2 */
+ epit2: epit@20d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: src@20d8000 {
compatible = "fsl,imx6q-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -793,7 +793,7 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
@@ -826,9 +826,9 @@
};
};
- gpr: iomuxc-gpr@020e0000 {
+ gpr: iomuxc-gpr@20e0000 {
compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
- reg = <0x020e0000 0x38>;
+ reg = <0x20e0000 0x38>;
mux: mux-controller {
compatible = "mmio-mux";
@@ -836,9 +836,9 @@
};
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
- reg = <0x020e0000 0x4000>;
+ reg = <0x20e0000 0x4000>;
};
ldb: ldb {
@@ -895,17 +895,17 @@
};
};
- dcic1: dcic@020e4000 {
+ dcic1: dcic@20e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
};
- dcic2: dcic@020e8000 {
+ dcic2: dcic@20e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -917,7 +917,7 @@
};
};
- aips-bus@02100000 { /* AIPS2 */
+ aips-bus@2100000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -950,11 +950,11 @@
};
};
- aipstz@0217c000 { /* AIPSTZ2 */
+ aipstz@217c000 { /* AIPSTZ2 */
reg = <0x0217c000 0x4000>;
};
- usbotg: usb@02184000 {
+ usbotg: usb@2184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -967,7 +967,7 @@
status = "disabled";
};
- usbh1: usb@02184200 {
+ usbh1: usb@2184200 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -981,7 +981,7 @@
status = "disabled";
};
- usbh2: usb@02184400 {
+ usbh2: usb@2184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -994,7 +994,7 @@
status = "disabled";
};
- usbh3: usb@02184600 {
+ usbh3: usb@2184600 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -1007,14 +1007,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
};
- fec: ethernet@02188000 {
+ fec: ethernet@2188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts-extended =
@@ -1027,14 +1027,14 @@
status = "disabled";
};
- mlb@0218c000 {
+ mlb@218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
<0 117 IRQ_TYPE_LEVEL_HIGH>,
<0 126 IRQ_TYPE_LEVEL_HIGH>;
};
- usdhc1: usdhc@02190000 {
+ usdhc1: usdhc@2190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1046,7 +1046,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: usdhc@2194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1058,7 +1058,7 @@
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: usdhc@2198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1070,7 +1070,7 @@
status = "disabled";
};
- usdhc4: usdhc@0219c000 {
+ usdhc4: usdhc@219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1082,7 +1082,7 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1092,7 +1092,7 @@
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1102,7 +1102,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1112,20 +1112,20 @@
status = "disabled";
};
- romcp@021ac000 {
+ romcp@21ac000 {
reg = <0x021ac000 0x4000>;
};
- mmdc0: mmdc@021b0000 { /* MMDC0 */
+ mmdc0: mmdc@21b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- mmdc1: mmdc@021b4000 { /* MMDC1 */
+ mmdc1: mmdc@21b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
- weim: weim@021b8000 {
+ weim: weim@21b8000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,imx6q-weim";
@@ -1136,29 +1136,29 @@
status = "disabled";
};
- ocotp: ocotp@021bc000 {
+ ocotp: ocotp@21bc000 {
compatible = "fsl,imx6q-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6QDL_CLK_IIM>;
};
- tzasc@021d0000 { /* TZASC1 */
+ tzasc@21d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
};
- tzasc@021d4000 { /* TZASC2 */
+ tzasc@21d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
- mipi_csi: mipi@021dc000 {
+ mipi_csi: mipi@21dc000 {
compatible = "fsl,imx6-mipi-csi2";
reg = <0x021dc000 0x4000>;
#address-cells = <1>;
@@ -1171,7 +1171,7 @@
status = "disabled";
};
- mipi_dsi: mipi@021e0000 {
+ mipi_dsi: mipi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x021e0000 0x4000>;
@@ -1199,14 +1199,14 @@
};
};
- vdoa@021e4000 {
+ vdoa@21e4000 {
compatible = "fsl,imx6q-vdoa";
reg = <0x021e4000 0x4000>;
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_VDOA>;
};
- uart2: serial@021e8000 {
+ uart2: serial@21e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
@@ -1218,7 +1218,7 @@
status = "disabled";
};
- uart3: serial@021ec000 {
+ uart3: serial@21ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -1230,7 +1230,7 @@
status = "disabled";
};
- uart4: serial@021f0000 {
+ uart4: serial@21f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -1242,7 +1242,7 @@
status = "disabled";
};
- uart5: serial@021f4000 {
+ uart5: serial@21f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
@@ -1255,7 +1255,7 @@
};
};
- ipu1: ipu@02400000 {
+ ipu1: ipu@2400000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ipu";
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
new file mode 100644
index 000000000000..92b38e6699aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8037.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
new file mode 100644
index 000000000000..ffc0f2ee11d2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6QP-8037 Module";
+ compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+ status = "disabled";
+};
+
+&gpmi {
+ status = "disabled";
+};
+
+&ipu2 {
+ status = "disabled";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ non-removable;
+ no-1-8-v;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
new file mode 100644
index 000000000000..07ad70718aec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8137.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
+ compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ipu2 {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
new file mode 100644
index 000000000000..dd494d587014
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6QP-8137 Module";
+ compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+ status = "disabled";
+};
+
+&gpmi {
+ status = "disabled";
+};
+
+&ipu2 {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ non-removable;
+ no-1-8-v;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
new file mode 100644
index 000000000000..f7badd82ce8a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 QuadPlus Board revD1";
+ compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 299d863690c5..5f4fdce715c1 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -44,19 +44,19 @@
/ {
soc {
- ocram2: sram@00940000 {
+ ocram2: sram@940000 {
compatible = "mmio-sram";
reg = <0x00940000 0x20000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- ocram3: sram@00960000 {
+ ocram3: sram@960000 {
compatible = "mmio-sram";
reg = <0x00960000 0x20000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- aips-bus@02100000 {
+ aips-bus@2100000 {
pre1: pre@21c8000 {
compatible = "fsl,imx6qp-pre";
reg = <0x021c8000 0x1000>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 0a90eea17018..60600b4cf5fe 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -145,7 +145,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3f76f980947e..3ea1a41893c8 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -76,7 +76,7 @@
};
};
- intc: interrupt-controller@00a01000 {
+ intc: interrupt-controller@a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -109,13 +109,13 @@
interrupt-parent = <&gpc>;
ranges;
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6SL_CLK_OCRAM>;
};
- L2: l2-cache@00a02000 {
+ L2: l2-cache@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -130,21 +130,21 @@
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
- aips1: aips-bus@02000000 {
+ aips1: aips-bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba: spba-bus@02000000 {
+ spba: spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx6sl-spdif",
"fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
@@ -165,7 +165,7 @@
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: ecspi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -177,7 +177,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: ecspi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -189,7 +189,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: ecspi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -201,7 +201,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: ecspi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +213,7 @@
status = "disabled";
};
- uart5: serial@02018000 {
+ uart5: serial@2018000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
@@ -226,7 +226,7 @@
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
@@ -239,7 +239,7 @@
status = "disabled";
};
- uart2: serial@02024000 {
+ uart2: serial@2024000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
@@ -252,7 +252,7 @@
status = "disabled";
};
- ssi1: ssi@02028000 {
+ ssi1: ssi@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -268,7 +268,7 @@
status = "disabled";
};
- ssi2: ssi@0202c000 {
+ ssi2: ssi@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -284,7 +284,7 @@
status = "disabled";
};
- ssi3: ssi@02030000 {
+ ssi3: ssi@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -300,7 +300,7 @@
status = "disabled";
};
- uart3: serial@02034000 {
+ uart3: serial@2034000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
@@ -313,7 +313,7 @@
status = "disabled";
};
- uart4: serial@02038000 {
+ uart4: serial@2038000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
@@ -327,7 +327,7 @@
};
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
@@ -337,7 +337,7 @@
clock-names = "ipg", "per";
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
@@ -347,7 +347,7 @@
clock-names = "ipg", "per";
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
@@ -357,7 +357,7 @@
clock-names = "ipg", "per";
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
@@ -367,7 +367,7 @@
clock-names = "ipg", "per";
};
- gpt: gpt@02098000 {
+ gpt: gpt@2098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,7 +376,7 @@
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -393,7 +393,7 @@
<&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -411,7 +411,7 @@
<&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -430,7 +430,7 @@
<&iomuxc 31 102 1>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -456,7 +456,7 @@
<&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -478,7 +478,7 @@
<&iomuxc 21 161 1>;
};
- kpp: kpp@020b8000 {
+ kpp: kpp@20b8000 {
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -486,14 +486,14 @@
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: wdog@20bc000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
};
- wdog2: wdog@020c0000 {
+ wdog2: wdog@20c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -501,7 +501,7 @@
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: ccm@20c4000 {
compatible = "fsl,imx6sl-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -509,7 +509,7 @@
#clock-cells = <1>;
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6sl-anatop",
"fsl,imx6q-anatop",
"syscon", "simple-bus";
@@ -623,7 +623,7 @@
clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -631,7 +631,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -639,7 +639,7 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -661,17 +661,17 @@
};
};
- epit1: epit@020d0000 {
+ epit1: epit@20d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 {
+ epit2: epit@20d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: src@20d8000 {
compatible = "fsl,imx6sl-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -679,7 +679,7 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
@@ -692,28 +692,28 @@
#power-domain-cells = <1>;
};
- gpr: iomuxc-gpr@020e0000 {
+ gpr: iomuxc-gpr@20e0000 {
compatible = "fsl,imx6sl-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e0000 0x38>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6sl-iomuxc";
reg = <0x020e0000 0x4000>;
};
- csi: csi@020e4000 {
+ csi: csi@20e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
- spdc: spdc@020e8000 {
+ spdc: spdc@20e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -725,17 +725,17 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pxp: pxp@020f0000 {
+ pxp: pxp@20f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
- epdc: epdc@020f4000 {
+ epdc: epdc@20f4000 {
reg = <0x020f4000 0x4000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
- lcdif: lcdif@020f8000 {
+ lcdif: lcdif@20f8000 {
compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -746,7 +746,7 @@
status = "disabled";
};
- dcp: dcp@020fc000 {
+ dcp: dcp@20fc000 {
compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -755,14 +755,14 @@
};
};
- aips2: aips-bus@02100000 {
+ aips2: aips-bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -775,7 +775,7 @@
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -788,7 +788,7 @@
status = "disabled";
};
- usbh: usb@02184400 {
+ usbh: usb@2184400 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -801,14 +801,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
};
- fec: ethernet@02188000 {
+ fec: ethernet@2188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -818,7 +818,7 @@
status = "disabled";
};
- usdhc1: usdhc@02190000 {
+ usdhc1: usdhc@2190000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -830,7 +830,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: usdhc@2194000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -842,7 +842,7 @@
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: usdhc@2198000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -854,7 +854,7 @@
status = "disabled";
};
- usdhc4: usdhc@0219c000 {
+ usdhc4: usdhc@219c000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -866,7 +866,7 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -876,7 +876,7 @@
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -886,7 +886,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -896,17 +896,17 @@
status = "disabled";
};
- mmdc: mmdc@021b0000 {
+ mmdc: mmdc@21b0000 {
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- rngb: rngb@021b4000 {
+ rngb: rngb@21b4000 {
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
- weim: weim@021b8000 {
+ weim: weim@21b8000 {
#address-cells = <2>;
#size-cells = <1>;
reg = <0x021b8000 0x4000>;
@@ -915,13 +915,13 @@
status = "disabled";
};
- ocotp: ocotp@021bc000 {
+ ocotp: ocotp@21bc000 {
compatible = "fsl,imx6sl-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SL_CLK_OCOTP>;
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index c5578d1c1ee4..f9d40ee14982 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -231,7 +231,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 71005478cdf0..e3533e74ccc8 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -18,7 +18,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index c0139d7e497a..6dd9bebfe027 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -18,7 +18,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze200";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
new file mode 100644
index 000000000000..4d8c6521845f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -0,0 +1,572 @@
+/*
+ * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Softing VIN|ING 2000";
+ compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_peri_3v3: regulator-peri_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ red {
+ label = "red";
+ max-brightness = <255>;
+ pwms = <&pwm6 0 50000>;
+ };
+
+ green {
+ label = "green";
+ max-brightness = <255>;
+ pwms = <&pwm2 0 50000>;
+ };
+
+ blue {
+ label = "blue";
+ max-brightness = <255>;
+ pwms = <&pwm1 0 50000>;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <&reg_peri_3v3>;
+ status = "okay";
+};
+
+&cpu0 {
+ /*
+ * This board has a shared rail of reg_arm and reg_soc (supplied by
+ * sw1a_reg) which is modeled below, but still this module behaves
+ * unstable without higher voltages. Hence, set higher voltages here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
+
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-supply = <&reg_peri_3v3>;
+ phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet0-phy@0 {
+ reg = <0>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-supply = <&reg_peri_3v3>;
+ phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet1-phy@0 {
+ reg = <0>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ proximity: sx9500@28 {
+ compatible = "semtech,sx9500";
+ reg = <0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx9500>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ pmic: pfuze100@8 {
+ compatible = "fsl,pfuze200";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpios>;
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1
+ MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1
+ MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1
+ MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9
+ MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038
+ /* LAN8720 PHY Reset */
+ MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0
+ /* MDIO */
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9
+ /* IRQ from PHY */
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0
+ MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038
+ /* LAN8720 PHY Reset */
+ MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0
+ /* MDIO */
+ MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9
+ MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9
+ /* IRQ from PHY */
+ MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpios: gpiosgrp {
+ fsl,pins = <
+ /* reset external uC */
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0
+ /* IRQ from external uC */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0
+ /* overcurrent detection */
+ MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp-1 {
+ fsl,pins = <
+ /* blue LED */
+ MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp-1 {
+ fsl,pins = <
+ /* green LED */
+ MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm6: pwm6grp-1 {
+ fsl,pins = <
+ /* red LED */
+ MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_sx9500: sx9500grp {
+ fsl,pins = <
+ /* Reset */
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838
+ /* IRQ */
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000
+ MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068
+ >;
+ };
+
+ pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm6>;
+ status = "okay";
+};
+
+&reg_arm {
+ vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+ vin-supply = <&sw1a_reg>;
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc4 {
+ /* hs200-mode is currently unsupported because Vccq is on 3.1V, but
+ * not on necessary 1.8V.
+ */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ keep-power-in-suspend;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index dcfc97591433..53b3eac94f0d 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -135,7 +135,7 @@
clock-frequency = <100000>;
status = "okay";
- pmic: pmic@08 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 6c7eb54be9e2..5b03ba3beda9 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -95,7 +95,7 @@
};
};
- intc: interrupt-controller@00a01000 {
+ intc: interrupt-controller@a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -153,13 +153,13 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
};
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6SX_CLK_OCRAM>;
};
- L2: l2-cache@00a02000 {
+ L2: l2-cache@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -169,7 +169,7 @@
arm,data-latency = <4 2 3>;
};
- gpu: gpu@01800000 {
+ gpu: gpu@1800000 {
compatible = "vivante,gc";
reg = <0x01800000 0x4000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -179,7 +179,7 @@
clock-names = "bus", "core", "shader";
};
- dma_apbh: dma-apbh@01804000 {
+ dma_apbh: dma-apbh@1804000 {
compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -192,7 +192,7 @@
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@01806000{
+ gpmi: gpmi-nand@1806000{
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -212,21 +212,21 @@
status = "disabled";
};
- aips1: aips-bus@02000000 {
+ aips1: aips-bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba-bus@02000000 {
+ spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -248,7 +248,7 @@
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: ecspi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -260,7 +260,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: ecspi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -272,7 +272,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: ecspi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -284,7 +284,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: ecspi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -296,7 +296,7 @@
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
@@ -309,7 +309,7 @@
status = "disabled";
};
- esai: esai@02024000 {
+ esai: esai@2024000 {
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -322,7 +322,7 @@
status = "disabled";
};
- ssi1: ssi@02028000 {
+ ssi1: ssi@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
@@ -336,7 +336,7 @@
status = "disabled";
};
- ssi2: ssi@0202c000 {
+ ssi2: ssi@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
@@ -350,7 +350,7 @@
status = "disabled";
};
- ssi3: ssi@02030000 {
+ ssi3: ssi@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
@@ -364,7 +364,7 @@
status = "disabled";
};
- asrc: asrc@02034000 {
+ asrc: asrc@2034000 {
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
@@ -381,7 +381,7 @@
};
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -391,7 +391,7 @@
#pwm-cells = <2>;
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -401,7 +401,7 @@
#pwm-cells = <2>;
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -411,7 +411,7 @@
#pwm-cells = <2>;
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -421,7 +421,7 @@
#pwm-cells = <2>;
};
- flexcan1: can@02090000 {
+ flexcan1: can@2090000 {
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -431,7 +431,7 @@
status = "disabled";
};
- flexcan2: can@02094000 {
+ flexcan2: can@2094000 {
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -441,7 +441,7 @@
status = "disabled";
};
- gpt: gpt@02098000 {
+ gpt: gpt@2098000 {
compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -450,7 +450,7 @@
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -462,7 +462,7 @@
gpio-ranges = <&iomuxc 0 5 26>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -474,7 +474,7 @@
gpio-ranges = <&iomuxc 0 31 20>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -486,7 +486,7 @@
gpio-ranges = <&iomuxc 0 51 29>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -498,7 +498,7 @@
gpio-ranges = <&iomuxc 0 80 32>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -510,7 +510,7 @@
gpio-ranges = <&iomuxc 0 112 24>;
};
- gpio6: gpio@020b0000 {
+ gpio6: gpio@20b0000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -522,7 +522,7 @@
gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
};
- gpio7: gpio@020b4000 {
+ gpio7: gpio@20b4000 {
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
@@ -534,7 +534,7 @@
gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
};
- kpp: kpp@020b8000 {
+ kpp: kpp@20b8000 {
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -542,14 +542,14 @@
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: wdog@20bc000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DUMMY>;
};
- wdog2: wdog@020c0000 {
+ wdog2: wdog@20c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -557,7 +557,7 @@
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: ccm@20c4000 {
compatible = "fsl,imx6sx-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -567,7 +567,7 @@
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
@@ -675,11 +675,12 @@
compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -687,7 +688,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -695,7 +696,7 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -724,17 +725,17 @@
};
};
- epit1: epit@020d0000 {
+ epit1: epit@20d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 {
+ epit2: epit@20d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: src@20d8000 {
compatible = "fsl,imx6sx-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -742,7 +743,7 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
@@ -751,18 +752,18 @@
interrupt-parent = <&intc>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6sx-iomuxc";
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@020e4000 {
+ gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6sx-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -775,7 +776,7 @@
};
};
- aips2: aips-bus@02100000 {
+ aips2: aips-bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -809,7 +810,7 @@
};
};
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -823,7 +824,7 @@
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -836,7 +837,7 @@
status = "disabled";
};
- usbh: usb@02184400 {
+ usbh: usb@2184400 {
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -851,14 +852,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6SX_CLK_USBOH3>;
};
- fec1: ethernet@02188000 {
+ fec1: ethernet@2188000 {
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
@@ -875,7 +876,7 @@
status = "disabled";
};
- mlb: mlb@0218c000 {
+ mlb: mlb@218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
@@ -884,7 +885,7 @@
status = "disabled";
};
- usdhc1: usdhc@02190000 {
+ usdhc1: usdhc@2190000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -896,7 +897,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: usdhc@2194000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +909,7 @@
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: usdhc@2198000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -920,7 +921,7 @@
status = "disabled";
};
- usdhc4: usdhc@0219c000 {
+ usdhc4: usdhc@219c000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -932,7 +933,7 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -942,7 +943,7 @@
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -952,7 +953,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -962,12 +963,12 @@
status = "disabled";
};
- mmdc: mmdc@021b0000 {
+ mmdc: mmdc@21b0000 {
compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- fec2: ethernet@021b4000 {
+ fec2: ethernet@21b4000 {
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
@@ -982,7 +983,7 @@
status = "disabled";
};
- weim: weim@021b8000 {
+ weim: weim@21b8000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
@@ -993,13 +994,23 @@
status = "disabled";
};
- ocotp: ocotp@021bc000 {
+ ocotp: ocotp@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx6sx-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
- sai1: sai@021d4000 {
+ sai1: sai@21d4000 {
compatible = "fsl,imx6sx-sai";
reg = <0x021d4000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1012,13 +1023,13 @@
status = "disabled";
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
- sai2: sai@021dc000 {
+ sai2: sai@21dc000 {
compatible = "fsl,imx6sx-sai";
reg = <0x021dc000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1031,7 +1042,7 @@
status = "disabled";
};
- qspi1: qspi@021e0000 {
+ qspi1: qspi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
@@ -1044,7 +1055,7 @@
status = "disabled";
};
- qspi2: qspi@021e4000 {
+ qspi2: qspi@21e4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
@@ -1057,7 +1068,7 @@
status = "disabled";
};
- uart2: serial@021e8000 {
+ uart2: serial@21e8000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
@@ -1070,7 +1081,7 @@
status = "disabled";
};
- uart3: serial@021ec000 {
+ uart3: serial@21ec000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
@@ -1083,7 +1094,7 @@
status = "disabled";
};
- uart4: serial@021f0000 {
+ uart4: serial@21f0000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
@@ -1096,7 +1107,7 @@
status = "disabled";
};
- uart5: serial@021f4000 {
+ uart5: serial@21f4000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
@@ -1109,7 +1120,7 @@
status = "disabled";
};
- i2c4: i2c@021f8000 {
+ i2c4: i2c@21f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -1120,21 +1131,21 @@
};
};
- aips3: aips-bus@02200000 {
+ aips3: aips-bus@2200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
- spba-bus@02200000 {
+ spba-bus@2200000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02240000 0x40000>;
ranges;
- csi1: csi@02214000 {
+ csi1: csi@2214000 {
reg = <0x02214000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
@@ -1144,7 +1155,7 @@
status = "disabled";
};
- pxp: pxp@02218000 {
+ pxp: pxp@2218000 {
reg = <0x02218000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PXP_AXI>,
@@ -1153,7 +1164,7 @@
status = "disabled";
};
- csi2: csi@0221c000 {
+ csi2: csi@221c000 {
reg = <0x0221c000 0x4000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
@@ -1163,7 +1174,7 @@
status = "disabled";
};
- lcdif1: lcdif@02220000 {
+ lcdif1: lcdif@2220000 {
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
reg = <0x02220000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
@@ -1174,7 +1185,7 @@
status = "disabled";
};
- lcdif2: lcdif@02224000 {
+ lcdif2: lcdif@2224000 {
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
reg = <0x02224000 0x4000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
@@ -1185,7 +1196,7 @@
status = "disabled";
};
- vadc: vadc@02228000 {
+ vadc: vadc@2228000 {
reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
reg-names = "vadc-vafe", "vadc-vdec";
clocks = <&clks IMX6SX_CLK_VADC>,
@@ -1195,7 +1206,7 @@
};
};
- adc1: adc@02280000 {
+ adc1: adc@2280000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
reg = <0x02280000 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -1206,7 +1217,7 @@
status = "disabled";
};
- adc2: adc@02284000 {
+ adc2: adc@2284000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
reg = <0x02284000 0x4000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -1217,7 +1228,7 @@
status = "disabled";
};
- wdog3: wdog@02288000 {
+ wdog3: wdog@2288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -1225,7 +1236,7 @@
status = "disabled";
};
- ecspi5: ecspi@0228c000 {
+ ecspi5: ecspi@228c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -1237,7 +1248,7 @@
status = "disabled";
};
- uart6: serial@022a0000 {
+ uart6: serial@22a0000 {
compatible = "fsl,imx6sx-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x022a0000 0x4000>;
@@ -1250,7 +1261,7 @@
status = "disabled";
};
- pwm5: pwm@022a4000 {
+ pwm5: pwm@22a4000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022a4000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1260,7 +1271,7 @@
#pwm-cells = <2>;
};
- pwm6: pwm@022a8000 {
+ pwm6: pwm@22a8000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022a8000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1270,7 +1281,7 @@
#pwm-cells = <2>;
};
- pwm7: pwm@022ac000 {
+ pwm7: pwm@22ac000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x022ac000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1280,7 +1291,7 @@
#pwm-cells = <2>;
};
- pwm8: pwm@0022b0000 {
+ pwm8: pwm@22b0000 {
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
reg = <0x0022b0000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 9c23e017d86a..e5d3ef88be60 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -147,6 +147,8 @@
&lcdif {
+ assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 7d7254b12a75..3bf26ebd4df9 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -175,7 +175,7 @@
reg = <1>;
max-speed = <100>;
interrupt-parent = <&gpio5>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
};
};
};
@@ -186,7 +186,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze3000@08 {
+ pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
@@ -223,7 +223,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
clocks = <&sys_mclk>;
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 28d055e3f301..2d80f7b50bc0 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -116,7 +116,7 @@
};
&i2c2 {
- /delete-node/ codec@0a;
+ /delete-node/ codec@a;
/delete-node/ touchscreen@48;
rtc: mcp7940x@6f {
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index ec745eb3b6a8..65111f9843f4 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -362,7 +362,7 @@
clock-frequency = <400000>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
@@ -424,7 +424,7 @@
display = <&display>;
status = "okay";
- display: display@di0 {
+ display: disp0 {
bits-per-pixel = <32>;
bus-width = <24>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index f11a241a340d..d5181f85ca9c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -98,7 +98,7 @@
};
};
- intc: interrupt-controller@00a01000 {
+ intc: interrupt-controller@a01000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -149,12 +149,12 @@
status = "disabled";
};
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
};
- dma_apbh: dma-apbh@01804000 {
+ dma_apbh: dma-apbh@1804000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -167,7 +167,7 @@
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
- gpmi: gpmi-nand@01806000 {
+ gpmi: gpmi-nand@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -187,21 +187,21 @@
status = "disabled";
};
- aips1: aips-bus@02000000 {
+ aips1: aips-bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba-bus@02000000 {
+ spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- ecspi1: ecspi@02008000 {
+ ecspi1: ecspi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +213,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: ecspi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -225,7 +225,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: ecspi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -237,7 +237,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: ecspi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -249,7 +249,7 @@
status = "disabled";
};
- uart7: serial@02018000 {
+ uart7: serial@2018000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02018000 0x4000>;
@@ -260,7 +260,7 @@
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02020000 0x4000>;
@@ -271,7 +271,7 @@
status = "disabled";
};
- uart8: serial@02024000 {
+ uart8: serial@2024000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02024000 0x4000>;
@@ -282,7 +282,7 @@
status = "disabled";
};
- sai1: sai@02028000 {
+ sai1: sai@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02028000 0x4000>;
@@ -297,7 +297,7 @@
status = "disabled";
};
- sai2: sai@0202c000 {
+ sai2: sai@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x0202c000 0x4000>;
@@ -312,7 +312,7 @@
status = "disabled";
};
- sai3: sai@02030000 {
+ sai3: sai@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02030000 0x4000>;
@@ -328,7 +328,7 @@
};
};
- tsc: tsc@02040000 {
+ tsc: tsc@2040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -339,7 +339,7 @@
status = "disabled";
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +350,7 @@
status = "disabled";
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
@@ -361,7 +361,7 @@
status = "disabled";
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
@@ -372,7 +372,7 @@
status = "disabled";
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -383,7 +383,7 @@
status = "disabled";
};
- can1: flexcan@02090000 {
+ can1: flexcan@2090000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,7 +393,7 @@
status = "disabled";
};
- can2: flexcan@02094000 {
+ can2: flexcan@2094000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -403,7 +403,7 @@
status = "disabled";
};
- gpt1: gpt@02098000 {
+ gpt1: gpt@2098000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -412,7 +412,7 @@
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -425,7 +425,7 @@
<&iomuxc 16 33 16>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -437,7 +437,7 @@
gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -449,7 +449,7 @@
gpio-ranges = <&iomuxc 0 65 29>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -461,7 +461,7 @@
gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -473,7 +473,7 @@
gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
};
- fec2: ethernet@020b4000 {
+ fec2: ethernet@20b4000 {
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x020b4000 0x4000>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
@@ -490,7 +490,7 @@
status = "disabled";
};
- kpp: kpp@020b8000 {
+ kpp: kpp@20b8000 {
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -498,14 +498,14 @@
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: wdog@20bc000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_WDOG1>;
};
- wdog2: wdog@020c0000 {
+ wdog2: wdog@20c0000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -513,7 +513,7 @@
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: ccm@20c4000 {
compatible = "fsl,imx6ul-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -523,7 +523,7 @@
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
@@ -580,7 +580,7 @@
};
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -589,7 +589,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -598,7 +598,16 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ tempmon: tempmon {
+ compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+ };
+
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -628,17 +637,17 @@
};
};
- epit1: epit@020d0000 {
+ epit1: epit@20d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 {
+ epit2: epit@20d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: src@20d8000 {
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -646,7 +655,7 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
@@ -655,18 +664,18 @@
interrupt-parent = <&intc>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@020e4000 {
+ gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6ul-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
- gpt2: gpt@020e8000 {
+ gpt2: gpt@20e8000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -675,7 +684,7 @@
clock-names = "ipg", "per";
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
"fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
@@ -687,7 +696,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pwm5: pwm@020f0000 {
+ pwm5: pwm@20f0000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f0000 0x4000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,7 +707,7 @@
status = "disabled";
};
- pwm6: pwm@020f4000 {
+ pwm6: pwm@20f4000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f4000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -709,7 +718,7 @@
status = "disabled";
};
- pwm7: pwm@020f8000 {
+ pwm7: pwm@20f8000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
@@ -720,7 +729,7 @@
status = "disabled";
};
- pwm8: pwm@020fc000 {
+ pwm8: pwm@20fc000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
@@ -732,14 +741,14 @@
};
};
- aips2: aips-bus@02100000 {
+ aips2: aips-bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -753,7 +762,7 @@
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -766,13 +775,13 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
};
- fec1: ethernet@02188000 {
+ fec1: ethernet@2188000 {
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
@@ -789,7 +798,7 @@
status = "disabled";
};
- usdhc1: usdhc@02190000 {
+ usdhc1: usdhc@2190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -801,7 +810,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: usdhc@2194000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -813,7 +822,7 @@
status = "disabled";
};
- adc1: adc@02198000 {
+ adc1: adc@2198000 {
compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -825,7 +834,7 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -835,7 +844,7 @@
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -845,7 +854,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -855,18 +864,28 @@
status = "disabled";
};
- mmdc: mmdc@021b0000 {
+ mmdc: mmdc@21b0000 {
compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- ocotp: ocotp-ctrl@021bc000 {
+ ocotp: ocotp-ctrl@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx6ul-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
- lcdif: lcdif@021c8000 {
+ lcdif: lcdif@21c8000 {
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
reg = <0x021c8000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -877,7 +896,7 @@
status = "disabled";
};
- qspi: qspi@021e0000 {
+ qspi: qspi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
@@ -890,7 +909,7 @@
status = "disabled";
};
- uart2: serial@021e8000 {
+ uart2: serial@21e8000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021e8000 0x4000>;
@@ -901,7 +920,7 @@
status = "disabled";
};
- uart3: serial@021ec000 {
+ uart3: serial@21ec000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021ec000 0x4000>;
@@ -912,7 +931,7 @@
status = "disabled";
};
- uart4: serial@021f0000 {
+ uart4: serial@21f0000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021f0000 0x4000>;
@@ -923,7 +942,7 @@
status = "disabled";
};
- uart5: serial@021f4000 {
+ uart5: serial@21f4000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021f4000 0x4000>;
@@ -934,7 +953,7 @@
status = "disabled";
};
- i2c4: i2c@021f8000 {
+ i2c4: i2c@21f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -944,7 +963,7 @@
status = "disabled";
};
- uart6: serial@021fc000 {
+ uart6: serial@21fc000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021fc000 0x4000>;
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 0a3915868aa3..bb5bf94f1a32 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -121,7 +121,7 @@
pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e7998308861f..2b05898bb3f6 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -181,7 +181,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze3000@08 {
+ pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
index e78c2c9cc28a..508328b2a6bf 100644
--- a/arch/arm/boot/dts/imx7d-pico.dts
+++ b/arch/arm/boot/dts/imx7d-pico.dts
@@ -52,6 +52,17 @@
reg = <0x80000000 0x80000000>;
};
+ reg_ap6212: regulator-ap6212 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_ap6212>;
+ regulator-name = "AP6212";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
@@ -137,7 +148,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
@@ -152,7 +163,7 @@
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pmic: pfuze3000@08 {
+ pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
@@ -271,6 +282,17 @@
status = "okay";
};
+&usdhc2 { /* Wifi SDIO */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&reg_ap6212>;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -326,6 +348,12 @@
>;
};
+ pinctrl_reg_ap6212: regap6212grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
+ >;
+ };
+
pinctrl_sai1: sai1grp {
fsl,pins = <
MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
@@ -348,6 +376,17 @@
>;
};
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 44637cabcc56..a7a5dc7b2700 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -241,7 +241,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze3000@08 {
+ pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 07b63f8b7314..9bdf121f7e43 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -122,7 +122,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze3000@08 {
+ pmic: pfuze3000@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
@@ -226,7 +226,7 @@
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 380f9ae60c78..4d58638d104b 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -11,7 +11,7 @@
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
- led@0c.0 {
+ led@c.0 {
compatible = "register-bit-led";
offset = <0x0c>;
mask = <0x01>;
@@ -100,7 +100,7 @@
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
- led@04.0 {
+ led@4.0 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x01>;
@@ -108,21 +108,21 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@04.1 {
+ led@4.1 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
- led@04.2 {
+ led@4.2 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
- led@04.3 {
+ led@4.3 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x08>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index a5d88a213dcd..94d2ff9836d0 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -154,21 +154,26 @@
};
pci: pciv3@62000000 {
- compatible = "v3,v360epc-pci";
+ compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0x62000000 0x10000>;
+ /* Bridge registers and config access space */
+ reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
interrupt-parent = <&pic>;
interrupts = <17>; /* Bus error IRQ */
- ranges = <0x00000000 0 0x61000000 /* config space */
- 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
- 0x01000000 0 0x0 /* I/O space */
- 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
- 0x02000000 0 0x00000000 /* non-prefectable memory */
- 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
- 0x42000000 0 0x10000000 /* prefetchable memory */
- 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
+ clocks = <&pciclk>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+ 0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+ 0x02000000 0 0x80000000 /* Core module alias memory */
+ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
interrupt-map-mask = <0xf800 0 0 0x7>;
interrupt-map = <
/* IDSEL 9 */
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
new file mode 100644
index 000000000000..efd8af9242d1
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -0,0 +1,152 @@
+/*
+ * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ aliases {
+ serial0 = &scif0;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2";
+ function = "i2c2";
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data_d";
+ function = "scif0";
+ };
+
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
new file mode 100644
index 000000000000..31fab5f183a9
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ aliases {
+ serial1 = &scif1;
+ serial4 = &hscif1;
+ };
+};
+
+&hscif1 {
+ pinctrl-0 = <&hscif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&pfc {
+ hscif1_pins: hscif1 {
+ groups = "hscif1_data_c", "hscif1_ctrl_c";
+ function = "hscif1";
+ };
+
+ scif1_pins: scif1 {
+ groups = "scif1_data_d";
+ function = "scif1";
+ };
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 819ab8345916..6b796b52ff4f 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -88,7 +88,7 @@
};
};
- msm_ram: msmram@0c000000 {
+ msm_ram: msmram@c000000 {
compatible = "mmio-sram";
reg = <0x0c000000 0x200000>;
ranges = <0x0 0x0c000000 0x200000>;
@@ -100,7 +100,7 @@
};
};
- psc: power-sleep-controller@02350000 {
+ psc: power-sleep-controller@2350000 {
pscrst: reset-controller {
compatible = "ti,k2e-pscrst", "ti,syscon-reset";
#reset-cells = <1>;
@@ -111,7 +111,7 @@
};
};
- dspgpio0: keystone_dsp_gpio@02620240 {
+ dspgpio0: keystone_dsp_gpio@2620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index f462f1043531..656af194a518 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,6 +45,22 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ ecap0_pins: ecap0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */
+ K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */
+ K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */
+ K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */
+ >;
+ };
+
};
&k2g_pinctrl {
@@ -81,6 +97,14 @@
K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
>;
};
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ >;
+ };
+
};
&uart0 {
@@ -112,3 +136,72 @@
memory-region = <&dsp_common_memory>;
status = "okay";
};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&keystone_usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&keystone_usb1 {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi_nor: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <5000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x100000 0xf00000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 826b286665e6..8f313ff406b9 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -28,6 +28,9 @@
aliases {
serial0 = &uart0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
rproc0 = &dsp0;
};
@@ -42,7 +45,7 @@
};
};
- gic: interrupt-controller@02561000 {
+ gic: interrupt-controller@2561000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -80,7 +83,7 @@
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
- msm_ram: msmram@0c000000 {
+ msm_ram: msmram@c000000 {
compatible = "mmio-sram";
reg = <0x0c000000 0x100000>;
ranges = <0x0 0x0c000000 0x100000>;
@@ -92,19 +95,19 @@
};
};
- k2g_pinctrl: pinmux@02621000 {
+ k2g_pinctrl: pinmux@2621000 {
compatible = "pinctrl-single";
reg = <0x02621000 0x410>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x001b0007>;
};
- devctrl: device-state-control@02620000 {
+ devctrl: device-state-control@2620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
};
- uart0: serial@02530c00 {
+ uart0: serial@2530c00 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
@@ -115,7 +118,7 @@
status = "disabled";
};
- dcan0: can@0260B200 {
+ dcan0: can@260b200 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0260B200 0x200>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
@@ -124,7 +127,7 @@
clocks = <&k2g_clks 0x0008 1>;
};
- dcan1: can@0260B400 {
+ dcan1: can@260b400 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0260B400 0x200>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
@@ -133,7 +136,40 @@
clocks = <&k2g_clks 0x0009 1>;
};
- kirq0: keystone_irq@026202a0 {
+ i2c0: i2c@2530000 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530000 0x400>;
+ clocks = <&k2g_clks 0x003a 0>;
+ power-domains = <&k2g_pds 0x003a>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2530400 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530400 0x400>;
+ clocks = <&k2g_clks 0x003b 0>;
+ power-domains = <&k2g_pds 0x003b>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2530800 {
+ compatible = "ti,keystone-i2c";
+ reg = <0x02530800 0x400>;
+ clocks = <&k2g_clks 0x003c 0>;
+ power-domains = <&k2g_pds 0x003c>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ kirq0: keystone_irq@26202a0 {
compatible = "ti,keystone-irq";
interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
@@ -141,7 +177,7 @@
ti,syscon-dev = <&devctrl 0x2a0>;
};
- dspgpio0: keystone_dsp_gpio@02620240 {
+ dspgpio0: keystone_dsp_gpio@2620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -164,7 +200,7 @@
status = "disabled";
};
- msgmgr: msgmgr@02a00000 {
+ msgmgr: msgmgr@2a00000 {
compatible = "ti,k2g-message-manager";
#mbox-cells = <2>;
reg-names = "queue_proxy_region",
@@ -176,7 +212,7 @@
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
};
- pmmc: pmmc@02921c00 {
+ pmmc: pmmc@2921c00 {
compatible = "ti,k2g-sci";
/*
* In case of rare platforms that does not use k2g as
@@ -246,7 +282,7 @@
clock-names = "gpio";
};
- edma0: edma@02700000 {
+ edma0: edma@2700000 {
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
reg = <0x02700000 0x8000>;
reg-names = "edma3_cc";
@@ -265,19 +301,19 @@
power-domains = <&k2g_pds 0x3f>;
};
- edma0_tptc0: tptc@02760000 {
+ edma0_tptc0: tptc@2760000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
reg = <0x02760000 0x400>;
power-domains = <&k2g_pds 0x3f>;
};
- edma0_tptc1: tptc@02768000 {
+ edma0_tptc1: tptc@2768000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
reg = <0x02768000 0x400>;
power-domains = <&k2g_pds 0x3f>;
};
- edma1: edma@02728000 {
+ edma1: edma@2728000 {
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
reg = <0x02728000 0x8000>;
reg-names = "edma3_cc";
@@ -300,13 +336,13 @@
power-domains = <&k2g_pds 0x4f>;
};
- edma1_tptc0: tptc@027b0000 {
+ edma1_tptc0: tptc@27b0000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
reg = <0x027b0000 0x400>;
power-domains = <&k2g_pds 0x4f>;
};
- edma1_tptc1: tptc@027b8000 {
+ edma1_tptc1: tptc@27b8000 {
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
reg = <0x027b8000 0x400>;
power-domains = <&k2g_pds 0x4f>;
@@ -343,5 +379,177 @@
clock-names = "fck", "mmchsdb_fck";
status = "disabled";
};
+
+ mcasp0: mcasp@2340000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02340000 0x2000>,
+ <0x21804000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma0 24 1>, <&edma0 25 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x4>;
+ clocks = <&k2g_clks 0x4 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2342000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02342000 0x2000>,
+ <0x21804400 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma1 48 1>, <&edma1 49 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x5>;
+ clocks = <&k2g_clks 0x5 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2344000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x02344000 0x2000>,
+ <0x21804800 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma1 50 1>, <&edma1 51 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&k2g_pds 0x6>;
+ clocks = <&k2g_clks 0x6 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ usb0_phy: usb-phy@0 {
+ compatible = "usb-nop-xceiv";
+ status = "disabled";
+ };
+
+ keystone_usb0: keystone-dwc3@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0016>;
+
+ usb0: usb@2690000 {
+ compatible = "snps,dwc3";
+ reg = <0x2690000 0x10000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ usb-phy = <&usb0_phy>;
+ status = "disabled";
+ };
+ };
+
+ usb1_phy: usb-phy@1 {
+ compatible = "usb-nop-xceiv";
+ status = "disabled";
+ };
+
+ keystone_usb1: keystone-dwc3@2580000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2580000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0017>;
+
+ usb1: usb@2590000 {
+ compatible = "snps,dwc3";
+ reg = <0x2590000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ usb-phy = <&usb1_phy>;
+ status = "disabled";
+ };
+ };
+
+ ecap0: pwm@21d1800 {
+ compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x021d1800 0x60>;
+ power-domains = <&k2g_pds 0x38>;
+ clocks = <&k2g_clks 0x38 0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ ecap1: pwm@21d1c00 {
+ compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x021d1c00 0x60>;
+ power-domains = <&k2g_pds 0x39>;
+ clocks = <&k2g_clks 0x39 0x0>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ spi0: spi@21805400 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805400 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0010>;
+ clocks = <&k2g_clks 0x0010 0>;
+ };
+
+ spi1: spi@21805800 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805800 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0011>;
+ clocks = <&k2g_clks 0x0011 0>;
+ };
+
+ spi2: spi@21805c00 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21805C00 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0012>;
+ clocks = <&k2g_clks 0x0012 0>;
+ };
+
+ spi3: spi@21806000 {
+ compatible = "ti,keystone-spi";
+ reg = <0x21806000 0x200>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k2g_pds 0x0013>;
+ clocks = <&k2g_clks 0x0013 0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 31dc00e4e5fd..7c486d9dc90e 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -59,7 +59,7 @@
soc {
/include/ "keystone-k2hk-clocks.dtsi"
- msm_ram: msmram@0c000000 {
+ msm_ram: msmram@c000000 {
compatible = "mmio-sram";
reg = <0x0c000000 0x600000>;
ranges = <0x0 0x0c000000 0x600000>;
@@ -71,7 +71,7 @@
};
};
- psc: power-sleep-controller@02350000 {
+ psc: power-sleep-controller@2350000 {
pscrst: reset-controller {
compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
#reset-cells = <1>;
@@ -89,7 +89,7 @@
};
};
- dspgpio0: keystone_dsp_gpio@02620240 {
+ dspgpio0: keystone_dsp_gpio@2620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -273,7 +273,7 @@
status = "disabled";
};
- mdio: mdio@02090300 {
+ mdio: mdio@2090300 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 4431310bc922..4370e6513aa4 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -43,7 +43,7 @@
soc {
/include/ "keystone-k2l-clocks.dtsi"
- uart2: serial@02348400 {
+ uart2: serial@2348400 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
@@ -53,7 +53,7 @@
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
};
- uart3: serial@02348800 {
+ uart3: serial@2348800 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
@@ -63,7 +63,7 @@
interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
};
- k2l_pmx: pinmux@02620690 {
+ k2l_pmx: pinmux@2620690 {
compatible = "pinctrl-single";
reg = <0x02620690 0xc>;
#address-cells = <1>;
@@ -213,7 +213,7 @@
};
};
- msm_ram: msmram@0c000000 {
+ msm_ram: msmram@c000000 {
compatible = "mmio-sram";
reg = <0x0c000000 0x200000>;
ranges = <0x0 0x0c000000 0x200000>;
@@ -225,7 +225,7 @@
};
};
- psc: power-sleep-controller@02350000 {
+ psc: power-sleep-controller@2350000 {
pscrst: reset-controller {
compatible = "ti,k2l-pscrst", "ti,syscon-reset";
#reset-cells = <1>;
@@ -247,7 +247,7 @@
clocks = <&clkosr>;
};
- dspgpio0: keystone_dsp_gpio@02620240 {
+ dspgpio0: keystone_dsp_gpio@2620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 8dd74f48a6d3..06e10544f9b1 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -78,17 +78,17 @@
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
- pllctrl: pll-controller@02310000 {
+ pllctrl: pll-controller@2310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};
- psc: power-sleep-controller@02350000 {
+ psc: power-sleep-controller@2350000 {
compatible = "syscon", "simple-mfd";
reg = <0x02350000 0x1000>;
};
- devctrl: device-state-control@02620000 {
+ devctrl: device-state-control@2620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
};
@@ -102,7 +102,7 @@
/include/ "keystone-clocks.dtsi"
- uart0: serial@02530c00 {
+ uart0: serial@2530c00 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
@@ -112,7 +112,7 @@
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
};
- uart1: serial@02531000 {
+ uart1: serial@2531000 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
@@ -214,7 +214,7 @@
};
};
- wdt: wdt@022f0080 {
+ wdt: wdt@22f0080 {
compatible = "ti,keystone-wdt","ti,davinci-wdt";
reg = <0x022f0080 0x80>;
clocks = <&clkwdtimer0>;
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 65e9524e852a..210d21a65bd1 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -208,32 +208,32 @@
spi-max-frequency = <20000000>;
mode = <0>;
- partition@00000000 {
+ partition@0 {
reg = <0x00000000 0x00080000>;
label = "RedBoot";
};
- partition@00080000 {
+ partition@80000 {
reg = <0x00080000 0x00200000>;
label = "zImage";
};
- partition@00280000 {
+ partition@280000 {
reg = <0x00280000 0x00140000>;
label = "rd.gz";
};
- partition@003c0000 {
+ partition@3c0000 {
reg = <0x003c0000 0x00010000>;
label = "vendor";
};
- partition@003d0000 {
+ partition@3d0000 {
reg = <0x003d0000 0x00020000>;
label = "RedBoot config";
};
- partition@003f0000 {
+ partition@3f0000 {
reg = <0x003f0000 0x00010000>;
label = "FIS directory";
};
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 4faea1d9facf..a88eb22070a1 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -45,29 +45,29 @@
spi-max-frequency = <20000000>;
mode = <0>;
- partition@0000000 {
+ partition@0 {
reg = <0x00000000 0x00080000>;
label = "U-Boot";
};
- partition@00200000 {
+ partition@200000 {
reg = <0x00200000 0x00200000>;
label = "Kernel";
};
- partition@00400000 {
+ partition@400000 {
reg = <0x00400000 0x00900000>;
label = "RootFS1";
};
- partition@00d00000 {
+ partition@d00000 {
reg = <0x00d00000 0x00300000>;
label = "RootFS2";
};
- partition@00040000 {
+ partition@40000 {
reg = <0x00080000 0x00040000>;
label = "U-Boot Config";
};
- partition@000c0000 {
+ partition@c0000 {
reg = <0x000c0000 0x00140000>;
label = "NAS Config";
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index a70fc7f01fc3..eb2bf7409655 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -41,7 +41,7 @@
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- nand: nand@012f {
+ nand: nand@12f {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
@@ -57,7 +57,7 @@
status = "disabled";
};
- crypto_sram: sa-sram@0301 {
+ crypto_sram: sa-sram@301 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
clocks = <&gate_clk 17>;
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index 52b3ed10283a..c43adb7b4d7c 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -231,24 +231,24 @@
#address-cells = <1>;
#size-cells = <1>;
- mtd0@00000000 {
+ mtd0@0 {
label = "ea3250-boot";
reg = <0x00000000 0x00080000>;
read-only;
};
- mtd1@00080000 {
+ mtd1@80000 {
label = "ea3250-uboot";
reg = <0x00080000 0x000c0000>;
read-only;
};
- mtd2@00140000 {
+ mtd2@140000 {
label = "ea3250-kernel";
reg = <0x00140000 0x00400000>;
};
- mtd3@00540000 {
+ mtd3@540000 {
label = "ea3250-rootfs";
reg = <0x00540000 0x07ac0000>;
};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index fd95e2b10357..c72eb9845603 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -154,29 +154,29 @@
#address-cells = <1>;
#size-cells = <1>;
- mtd0@00000000 {
+ mtd0@0 {
label = "phy3250-boot";
reg = <0x00000000 0x00064000>;
read-only;
};
- mtd1@00064000 {
+ mtd1@64000 {
label = "phy3250-uboot";
reg = <0x00064000 0x00190000>;
read-only;
};
- mtd2@001f4000 {
+ mtd2@1f4000 {
label = "phy3250-ubt-prms";
reg = <0x001f4000 0x00010000>;
};
- mtd3@00204000 {
+ mtd3@204000 {
label = "phy3250-kernel";
reg = <0x00204000 0x00400000>;
};
- mtd4@00604000 {
+ mtd4@604000 {
label = "phy3250-rootfs";
reg = <0x00604000 0x039fc000>;
};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index d81fe433e3c8..abff7ef7c9cd 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -55,7 +55,7 @@
<0x20000000 0x20000000 0x30000000>,
<0xe0000000 0xe0000000 0x04000000>;
- iram: sram@08000000 {
+ iram: sram@8000000 {
compatible = "mmio-sram";
reg = <0x08000000 0x20000>;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index cd6ad072e72c..4926133077b3 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -80,6 +80,20 @@
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
+ assist: assist@7c00 {
+ compatible = "amlogic,meson-mx-assist", "syscon";
+ reg = <0x7c00 0x200>;
+ };
+
+ gpio_intc: interrupt-controller@9880 {
+ compatible = "amlogic,meson-gpio-intc";
+ reg = <0xc1109880 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ status = "disabled";
+ };
+
hwrng: rng@8100 {
compatible = "amlogic,meson-rng";
reg = <0x8100 0x8>;
@@ -160,6 +174,15 @@
status = "disabled";
};
+ sdio: mmc@8c20 {
+ compatible = "amlogic,meson-mx-sdio";
+ reg = <0x8c20 0x20>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spifc: spi@8c80 {
compatible = "amlogic,meson6-spifc";
reg = <0x8c80 0x80>;
@@ -217,7 +240,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc9040000 0x40000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
@@ -229,7 +252,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc90c0000 0x40000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
@@ -252,5 +275,25 @@
#size-cells = <1>;
ranges = <0 0xd9000000 0x20000>;
};
+
+ bootrom: bootrom@d9040000 {
+ compatible = "amlogic,meson-mx-bootrom", "syscon";
+ reg = <0xd9040000 0x10000>;
+ };
+
+ secbus: secbus@da000000 {
+ compatible = "simple-bus";
+ reg = <0xda000000 0x6000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xda000000 0x6000>;
+
+ efuse: nvmem@0 {
+ compatible = "amlogic,meson6-efuse";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
};
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index ef281d290052..9b463211339f 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -84,6 +84,9 @@
};
}; /* end of / */
+&efuse {
+ status = "disabled";
+};
&uart_AO {
clocks = <&xtal>, <&clk81>, <&clk81>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index b98d44fde6b6..2d7a0752a460 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#include "meson.dtsi"
/ {
@@ -60,6 +61,8 @@
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x200>;
+ enable-method = "amlogic,meson8-smp";
+ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
};
cpu@201 {
@@ -67,6 +70,8 @@
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x201>;
+ enable-method = "amlogic,meson8-smp";
+ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
};
cpu@202 {
@@ -74,6 +79,8 @@
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x202>;
+ enable-method = "amlogic,meson8-smp";
+ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
};
cpu@203 {
@@ -81,6 +88,8 @@
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x203>;
+ enable-method = "amlogic,meson8-smp";
+ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
};
};
@@ -118,6 +127,11 @@
}; /* end of / */
&aobus {
+ pmu: pmu@e0 {
+ compatible = "amlogic,meson8-pmu", "syscon";
+ reg = <0xe0 0x8>;
+ };
+
pinctrl_aobus: pinctrl@84 {
compatible = "amlogic,meson8-aobus-pinctrl";
reg = <0x84 0xc>;
@@ -132,7 +146,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 120 16>;
+ gpio-ranges = <&pinctrl_aobus 0 0 16>;
};
uart_ao_a_pins: uart_ao_a {
@@ -173,6 +187,11 @@
reg = <0x8000 0x4>, <0x4000 0x460>;
};
+ analog_top: analog-top@81a8 {
+ compatible = "amlogic,meson8-analog-top", "syscon";
+ reg = <0x81a8 0x14>;
+ };
+
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
reg = <0x86c0 0x10>;
@@ -249,6 +268,19 @@
};
};
+&ahb_sram {
+ smp-sram@1ff80 {
+ compatible = "amlogic,meson8-smp-sram";
+ reg = <0x1ff80 0x8>;
+ };
+};
+
+&efuse {
+ compatible = "amlogic,meson8-efuse";
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "core";
+};
+
&ethmac {
clocks = <&clkc CLKID_ETH>;
clock-names = "stmmaceth";
@@ -294,6 +326,12 @@
clock-names = "clkin", "core", "sana";
};
+&sdio {
+ compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+ clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+ clock-names = "core", "clkin";
+};
+
&spifc {
clocks = <&clkc CLKID_CLK81>;
};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index e50f1a1fdbc7..9ff6ca4e20d0 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -76,3 +76,26 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
+ * to be turned high in order to be detected by the USB Controller.
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index bc278da7df0d..d75e0ceda8bb 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#include "meson.dtsi"
/ {
@@ -59,6 +60,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x200>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
};
cpu@201 {
@@ -66,6 +69,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x201>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
};
cpu@202 {
@@ -73,6 +78,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x202>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
};
cpu@203 {
@@ -80,6 +87,20 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x203>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* 2 MiB reserved for Hardware ROM Firmware? */
+ hwrom@0 {
+ reg = <0x0 0x200000>;
+ no-map;
};
};
@@ -90,6 +111,11 @@
}; /* end of / */
&aobus {
+ pmu: pmu@e0 {
+ compatible = "amlogic,meson8b-pmu", "syscon";
+ reg = <0xe0 0x18>;
+ };
+
pinctrl_aobus: pinctrl@84 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0x84 0xc>;
@@ -104,7 +130,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 130 16>;
+ gpio-ranges = <&pinctrl_aobus 0 0 16>;
};
uart_ao_a_pins: uart_ao_a {
@@ -130,6 +156,11 @@
#reset-cells = <1>;
};
+ analog_top: analog-top@81a8 {
+ compatible = "amlogic,meson8b-analog-top", "syscon";
+ reg = <0x81a8 0x14>;
+ };
+
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson8b-pwm";
reg = <0x86c0 0x10>;
@@ -157,11 +188,31 @@
};
};
+&ahb_sram {
+ smp-sram@1ff80 {
+ compatible = "amlogic,meson8b-smp-sram";
+ reg = <0x1ff80 0x8>;
+ };
+};
+
+
+&efuse {
+ compatible = "amlogic,meson8b-efuse";
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "core";
+};
+
&ethmac {
clocks = <&clkc CLKID_ETH>;
clock-names = "stmmaceth";
};
+&gpio_intc {
+ compatible = "amlogic,meson-gpio-intc",
+ "amlogic,meson8b-gpio-intc";
+ status = "okay";
+};
+
&hwrng {
compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
clocks = <&clkc CLKID_RNG0>;
@@ -190,6 +241,12 @@
clock-names = "clkin", "core", "sana";
};
+&sdio {
+ compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+ clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+ clock-names = "core", "clkin";
+};
+
&uart_AO {
clocks = <&clkc CLKID_CLK81>;
};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index 116ce78bea4f..36cfa215620d 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -46,7 +46,7 @@
};
};
- usb0: ohci@00300000 {
+ usb0: ohci@300000 {
num-ports = <1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index f48497354221..63af4b13a36f 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -56,12 +56,29 @@
bt_sco_codec:bt_sco_codec {
compatible = "linux,bt-sco";
};
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&bls 0 100000>;
+ brightness-levels = <
+ 0 16 32 48 64 80 96 112
+ 128 144 160 176 192 208 224 240
+ 255
+ >;
+ default-brightness-level = <9>;
+ };
};
&auxadc {
status = "okay";
};
+&bls {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_bls_gpio>;
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -111,6 +128,12 @@
};
};
+ pwm_bls_gpio: pwm_bls_gpio {
+ pins_cmd_dat {
+ pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+ };
+ };
+
spi_pins_a: spi0@0 {
pins_spi {
pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index afe12e5b51f9..965ddfbc9953 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -430,7 +430,9 @@
compatible = "mediatek,mt2701-audio";
reg = <0 0x11220000 0 0x2000>,
<0 0x112a0000 0 0x20000>;
- interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -530,6 +532,15 @@
#clock-cells = <1>;
};
+ bls: pwm@1400a000 {
+ compatible = "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
larb0: larb@14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index 0d6f60af7640..41df742d7891 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -139,7 +139,7 @@
status = "disabled";
};
- wdt: watchdog@010000000 {
+ wdt: watchdog@10000000 {
compatible = "mediatek,mt6589-wdt";
reg = <0x10000000 0x44>;
};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index ec8a07415cb3..0640fb75bf59 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -227,8 +227,7 @@
};
pio: pinctrl@10005000 {
- compatible = "mediatek,mt7623-pinctrl",
- "mediatek,mt2701-pinctrl";
+ compatible = "mediatek,mt7623-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
pins-are-numbered;
@@ -544,7 +543,9 @@
"mediatek,mt2701-audio";
reg = <0 0x11220000 0 0x2000>,
<0 0x112a0000 0 0x20000>;
- interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -678,7 +679,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -688,8 +689,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -697,12 +696,16 @@
u2port0: usb-phy@1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -717,7 +720,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -727,8 +730,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -736,12 +737,16 @@
u2port1: usb-phy@1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port1: usb-phy@1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -782,16 +787,15 @@
};
crypto: crypto@1b240000 {
- compatible = "mediatek,mt7623-crypto";
+ compatible = "mediatek,eip97-crypto";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <&ethsys CLK_ETHSYS_CRYPTO>;
- clock-names = "ethif","cryp";
+ clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "cryp";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index ee5a0bb22354..ec2283b1a638 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -20,7 +20,7 @@
};
};
- bootrom: bootrom@00000000 {
+ bootrom: bootrom@0 {
reg = <0x00000000 0x80000>;
};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index 1de80c7886ab..1df3ace3af92 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -7,6 +7,10 @@
reg = <0x80000000 0x8000000>; /* 128 MB */
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
ocp {
i2c0 {
compatible = "i2c-cbus-gpio";
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index c963b31ec3b3..5a4ba0aea447 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -9,146 +9,11 @@
#include "omap36xx.dtsi"
#include "omap3-evm-common.dtsi"
-
+#include "omap3-evm-processor-common.dtsi"
/ {
model = "TI OMAP37XX EVM (TMDSEVM3730)";
compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- wl12xx_vmmc: wl12xx_vmmc {
- pinctrl-names = "default";
- pinctrl-0 = <&wl12xx_gpio>;
- };
-};
-
-&dss {
- pinctrl-names = "default";
- pinctrl-0 = <
- &dss_dpi_pins1
- &dss_dpi_pins2
- >;
-};
-
-&hsusb2_phy {
- pinctrl-names = "default";
- pinctrl-0 = <&ehci_phy_pins>;
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
-
- dss_dpi_pins1: pinmux_dss_dpi_pins2 {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
-
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
-
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
- >;
- };
-
- /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
- mmc2_pins: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
- >;
- };
-
- /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
- on_board_gpio_61: pinmux_ehci_port_select_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
- >;
- };
-
- /* Used by OHCI and EHCI. OHCI won't work without external phy */
- hsusb2_pins: pinmux_hsusb2_pins {
- pinctrl-single,pins = <
-
- /* mcspi1_cs3.hsusb2_data2 */
- OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
- /* mcspi2_clk.hsusb2_data7 */
- OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
- /* mcspi2_simo.hsusb2_data4 */
- OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
- /* mcspi2_somi.hsusb2_data5 */
- OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
- /* mcspi2_cs0.hsusb2_data6 */
- OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
-
- /* mcspi2_cs1.hsusb2_data3 */
- OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
- >;
- };
-
- wl12xx_gpio: pinmux_wl12xx_gpio {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
- OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
- >;
- };
-
- smsc911x_pins: pinmux_smsc911x_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
- >;
- };
};
&omap3_pmx_core2 {
@@ -191,74 +56,7 @@
};
};
-&omap3_pmx_wkup {
- dss_dpi_pins2: pinmux_dss_dpi_pins1 {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
- OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
- OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
- OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
- OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
- >;
- };
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&uart1 {
- interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-&uart2 {
- interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-};
-
-&uart3 {
- interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
-/*
- * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
- * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
- */
-&gpio2 {
- en_usb2_port {
- gpio-hog;
- gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */
- output-low;
- line-name = "enable usb2 port";
- };
-};
-
-/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
-&twl_gpio {
- en_on_board_gpio_61 {
- gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "en_hsusb2_clk";
- };
-};
-
&gpmc {
- ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
- <5 0 0x2c000000 0x01000000>;
-
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
@@ -309,9 +107,4 @@
reg = <0x780000 0x1f880000>;
};
};
-
- ethernet@gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc911x_pins>;
- };
};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
new file mode 100644
index 000000000000..ce7f42f9448c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -0,0 +1,216 @@
+/*
+ * Common support for omap3 EVM 35xx/37xx processor modules
+ */
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ };
+};
+
+&dss {
+ vdds_dsi-supply = <&vpll2>;
+ vdda_video-supply = <&lcd_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins1
+ &dss_dpi_pins2
+ >;
+};
+
+&hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehci_phy_pins>;
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
+
+ dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
+ on_board_gpio_61: pinmux_ehci_port_select_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
+ >;
+ };
+
+ /* Used by OHCI and EHCI. OHCI won't work without external phy */
+ hsusb2_pins: pinmux_hsusb2_pins {
+ pinctrl-single,pins = <
+
+ /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* mcspi2_cs1.hsusb2_data3 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
+ >;
+ };
+
+ smsc911x_pins: pinmux_smsc911x_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+/*
+ * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
+ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
+ */
+&gpio2 {
+ en_usb2_port {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */
+ output-low;
+ line-name = "enable usb2 port";
+ };
+};
+
+/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
+&twl_gpio {
+ en_on_board_gpio_61 {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "en_hsusb2_clk";
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
+ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc911x_pins>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 99b2bfcd1059..21a3b88aef0c 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -9,13 +9,81 @@
#include "omap34xx.dtsi"
#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
/ {
model = "TI OMAP35XX EVM (TMDSEVM3530)";
- compatible = "ti,omap3-evm", "ti,omap3";
+ compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+
+ ehci_phy_pins: pinmux_ehci_phy_pins {
+ pinctrl-single,pins = <
+
+ /* EHCI PHY reset GPIO etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+ /* EHCI VBUS etk_d8.gpio_22 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+ >;
+ };
+
+ /* Used by OHCI and EHCI. OHCI won't work without external phy */
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+
+ /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+ /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+ /* etk_d15.hsusb2_data1 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
+&gpmc {
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name= "micron,mt29f2g16abdhc";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index fa611a5e4850..343a36d8031d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -257,7 +257,7 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
gpiom1: gpio@20 {
- compatible = "mcp,mcp23017";
+ compatible = "microchip,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4acd32a1c4ef..669c51c00c00 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -791,7 +791,7 @@
};
/* D/A converter for auto-focus */
- ad5820: dac@0c {
+ ad5820: dac@c {
compatible = "adi,ad5820";
reg = <0x0c>;
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index 25e100db7b1a..b8b9fcc41ef1 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -30,6 +30,7 @@
compatible = "sharp,ls037v7dw01";
label = "lcd";
power-supply = <&lcd_3v3>;
+ envdd-supply = <&lcd_3v3>;
port {
lcd_in: endpoint {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 2b48e51c372a..22c1eee9b07a 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -13,6 +13,10 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
aliases {
display0 = &dvi0;
display1 = &hdmi0;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index f69de916b06a..1dc5a76b3c71 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -828,7 +828,7 @@
/*
* Child device unsupported by davinci-mcasp. At least
- * TX path is disabled for omap4, and only DIT mode
+ * RX path is disabled for omap4, and only DIT mode
* works with no I2S. See also old Android kernel
* omap-mcasp driver for more information.
*/
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 7824b2631cb6..575ecffb0e9e 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -14,6 +14,10 @@
display0 = &hdmi0;
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
vmain: fixedregulator-vmain {
compatible = "regulator-fixed";
regulator-name = "vmain";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b86ac7df620d..4cd0005e462f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -194,7 +194,7 @@
pbias_mmc_reg: pbias_mmc_omap5 {
regulator-name = "pbias_mmc_omap5";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
};
};
};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
new file mode 100644
index 000000000000..ea4e01bce8d1
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -0,0 +1,44 @@
+/*
+ * Cubietech CubieBoard6
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+ compatible = "cubietech,cubieboard6", "actions,s500";
+ model = "CubieBoard6";
+
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ uart3_clk: uart3-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <921600>;
+ #clock-cells = <0>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
+
+&uart3 {
+ status = "okay";
+ clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
index 521463d4cac6..7be1d2eaf3f0 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -19,8 +19,15 @@
chosen {
stdout-path = "serial3:115200n8";
};
+
+ uart3_clk: uart3-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <921600>;
+ #clock-cells = <0>;
+ };
};
&uart3 {
status = "okay";
+ clocks = <&uart3_clk>;
};
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 51a48741d4c0..43c9980a4260 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
/ {
compatible = "actions,s500";
@@ -43,6 +44,7 @@
compatible = "arm,cortex-a9";
reg = <0x2>;
enable-method = "actions,s500-smp";
+ power-domains = <&sps S500_PD_CPU2>;
};
cpu3: cpu@3 {
@@ -50,6 +52,7 @@
compatible = "arm,cortex-a9";
reg = <0x3>;
enable-method = "actions,s500-smp";
+ power-domains = <&sps S500_PD_CPU3>;
};
};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index 46aa6db8353a..c2b48a1838eb 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -207,7 +207,7 @@
};
};
- gpio0: gpio@000000 {
+ gpio0: gpio@0 {
compatible = "oxsemi,ox810se-gpio";
reg = <0x000000 0x100000>;
interrupts = <21>;
@@ -296,7 +296,7 @@
compatible = "simple-bus";
ranges = <0 0x45000000 0x1000000>;
- sys: sys-ctrl@000000 {
+ sys: sys-ctrl@0 {
compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
reg = <0x000000 0x100000>;
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index 459207536a46..085bbd33eadc 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -173,7 +173,7 @@
};
};
- gpio0: gpio@000000 {
+ gpio0: gpio@0 {
compatible = "oxsemi,ox820-gpio";
reg = <0x000000 0x100000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index 533919e96eae..a1266cf8776c 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -124,7 +124,7 @@
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
- rtc0: rtc@00000 {
+ rtc0: rtc@0 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
index ab3e80085511..d78cd207eca1 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -223,7 +223,7 @@
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
- rtc0: rtc@00000 {
+ rtc0: rtc@0 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 3139221737ee..be5177221cbb 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -127,12 +127,12 @@
};
};
- usb0: ohci@00700000 {
+ usb0: ohci@700000 {
status = "okay";
num-ports = <2>;
};
- usb1: ehci@00800000 {
+ usb1: ehci@800000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 9d725f983282..497bb065eb9d 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -397,23 +397,23 @@
xoadc-ref-supply = <&pm8058_l18>;
/* Board-specific channels */
- mpp5@05 {
+ mpp5@5 {
/* Connected to AOUT of ALS sensor */
reg = <0x00 0x05>;
};
- mpp6@06 {
+ mpp6@6 {
/* Connected to test point TP43 */
reg = <0x00 0x06>;
};
- mpp7@07 {
+ mpp7@7 {
/* Connected to battery thermistor */
reg = <0x00 0x07>;
};
- mpp8@08 {
+ mpp8@8 {
/* Connected to battery ID detector */
reg = <0x00 0x08>;
};
- mpp9@09 {
+ mpp9@9 {
/* Connected to XO thermistor */
reg = <0x00 0x09>;
};
@@ -512,7 +512,7 @@
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
- ak8975@0c {
+ ak8975@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
/* FIXME: GPIO33 has interrupt 224 on the PM8058 */
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6089c8d56cd5..3ca96e361878 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -591,6 +591,7 @@
clocks = <&gcc GSBI6_QUP_CLK>,
<&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
+ status = "disabled";
};
};
@@ -907,11 +908,11 @@
usb_hs1_phy: phy {
compatible = "qcom,usb-hs-phy-apq8064",
"qcom,usb-hs-phy";
- #phy-cells = <0>;
clocks = <&sleep_clk>, <&cxo_board>;
clock-names = "sleep", "ref";
resets = <&usb1 0>;
reset-names = "por";
+ #phy-cells = <0>;
};
};
};
@@ -1264,6 +1265,7 @@
dsi0_phy: dsi-phy@4700200 {
compatible = "qcom,dsi-phy-28nm-8960";
#clock-cells = <1>;
+ #phy-cells = <0>;
reg = <0x04700200 0x100>,
<0x04700300 0x200>,
@@ -1418,6 +1420,7 @@
clocks = <&mmcc HDMI_S_AHB_CLK>;
clock-names = "slave_iface_clk";
+ #phy-cells = <0>;
};
mdp: mdp@5100000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 221c4584552f..33030f9419fe 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -124,6 +124,73 @@
reg = <0x900000 0x4000>;
};
+ gsbi6: gsbi@16500000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <12>;
+ reg = <0x16500000 0x100>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi6_serial: serial@16540000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16540000 0x1000>,
+ <0x16500000 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi6_i2c: i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ gsbi7: gsbi@16600000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <12>;
+ reg = <0x16600000 0x100>;
+ clocks = <&gcc GSBI7_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi7_serial: serial@16640000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16640000 0x1000>,
+ <0x16600000 0x1000>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi7_i2c: i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
gsbi8: gsbi@19800000 {
compatible = "qcom,gsbi-v1.0.0";
@@ -317,37 +384,37 @@
#size-cells = <0>;
#io-channel-cells = <2>;
- vcoin: adc-channel@00 {
+ vcoin: adc-channel@0 {
reg = <0x00 0x00>;
};
- vbat: adc-channel@01 {
+ vbat: adc-channel@1 {
reg = <0x00 0x01>;
};
- dcin: adc-channel@02 {
+ dcin: adc-channel@2 {
reg = <0x00 0x02>;
};
- ichg: adc-channel@03 {
+ ichg: adc-channel@3 {
reg = <0x00 0x03>;
};
- vph_pwr: adc-channel@04 {
+ vph_pwr: adc-channel@4 {
reg = <0x00 0x04>;
};
- usb_vbus: adc-channel@0a {
+ usb_vbus: adc-channel@a {
reg = <0x00 0x0a>;
};
- die_temp: adc-channel@0b {
+ die_temp: adc-channel@b {
reg = <0x00 0x0b>;
};
- ref_625mv: adc-channel@0c {
+ ref_625mv: adc-channel@c {
reg = <0x00 0x0c>;
};
- ref_1250mv: adc-channel@0d {
+ ref_1250mv: adc-channel@d {
reg = <0x00 0x0d>;
};
- ref_325mv: adc-channel@0e {
+ ref_325mv: adc-channel@e {
reg = <0x00 0x0e>;
};
- ref_muxoff: adc-channel@0f {
+ ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
new file mode 100644
index 000000000000..d0a5df90b543
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -0,0 +1,321 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+
+/ {
+ model = "Fairphone 2";
+ compatible = "fairphone,fp2", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+};
+
+&soc {
+ serial@f991e000 {
+ status = "ok";
+ };
+
+ pinctrl@fd510000 {
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+ };
+
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pm8941@0 {
+ gpios@c000 {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio1", "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
new file mode 100644
index 000000000000..e87f2c99060d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -0,0 +1,641 @@
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z2 Tablet";
+ compatible = "sony,xperia-castor", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-system-load = <154000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <500000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_bl_vddio: lcd-backlight-vddio {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bl_vddio";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ gpio = <&msmgpio 69 0>;
+ enable-active-high;
+
+ vin-supply = <&pm8941_s3>;
+ startup-delay-us = <70000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_backlight_en_pin_a>;
+ };
+
+ vreg_vsp: lcd-dcdc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_vsp";
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+
+ gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_pin>;
+ };
+};
+
+&soc {
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ sdhci@f9864900 {
+ status = "ok";
+
+ max-frequency = <100000000>;
+ non-removable;
+ vmmc-supply = <&vreg_wlan>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc3_pin_a>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bcrmf@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ };
+ };
+
+ sdhci@f98a4900 {
+ status = "ok";
+
+ bus-width = <4>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ };
+
+ serial@f991e000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
+
+ pinctrl@fd510000 {
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ i2c8_pins: i2c8 {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c8";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c11_pins: i2c11 {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ lcd_backlight_en_pin_a: lcd-backlight-vddio {
+ pins = "gpio69";
+ drive-strength = <10>;
+ output-low;
+ bias-disable;
+ };
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc3_pin_a: sdhc3-pin-active {
+ clk {
+ pins = "gpio40";
+ function = "sdc3";
+
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "gpio39";
+ function = "sdc3";
+
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38";
+ function = "sdc3";
+
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ ts_int_pin: synaptics {
+ pin {
+ pins = "gpio86";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+ };
+ };
+
+ i2c@f9964000 {
+ status = "ok";
+
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_pins>;
+
+ synaptics@2c {
+ compatible = "syna,rmi-i2c";
+ reg = <0x2c>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_pin>;
+
+ rmi-f01@1 {
+ reg = <0x1>;
+ syna,nosleep = <1>;
+ };
+
+ rmi-f11@11 {
+ reg = <0x11>;
+ syna,f11-flip-x = <1>;
+ syna,sensor-type = <1>;
+ };
+ };
+ };
+
+ i2c@f9967000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c11_pins>;
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ lp8566_wled: backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+ power-supply = <&vreg_bl_vddio>;
+
+ bl-name = "backlight";
+ dev-ctrl = /bits/ 8 <0x05>;
+ init-brt = /bits/ 8 <0x3f>;
+ rom_a0h {
+ rom-addr = /bits/ 8 <0xa0>;
+ rom-val = /bits/ 8 <0xff>;
+ };
+ rom_a1h {
+ rom-addr = /bits/ 8 <0xa1>;
+ rom-val = /bits/ 8 <0x3f>;
+ };
+ rom_a2h {
+ rom-addr = /bits/ 8 <0xa2>;
+ rom-val = /bits/ 8 <0x20>;
+ };
+ rom_a3h {
+ rom-addr = /bits/ 8 <0xa3>;
+ rom-val = /bits/ 8 <0x5e>;
+ };
+ rom_a4h {
+ rom-addr = /bits/ 8 <0xa4>;
+ rom-val = /bits/ 8 <0x02>;
+ };
+ rom_a5h {
+ rom-addr = /bits/ 8 <0xa5>;
+ rom-val = /bits/ 8 <0x04>;
+ };
+ rom_a6h {
+ rom-addr = /bits/ 8 <0xa6>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom_a7h {
+ rom-addr = /bits/ 8 <0xa7>;
+ rom-val = /bits/ 8 <0xf7>;
+ };
+ rom_a9h {
+ rom-addr = /bits/ 8 <0xa9>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom_aah {
+ rom-addr = /bits/ 8 <0xaa>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ rom_aeh {
+ rom-addr = /bits/ 8 <0xae>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pm8941@0 {
+ charger@1000 {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+ };
+
+ gpios@c000 {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_sleep_clk_pin: wl-sleep-clk {
+ pins = "gpio17";
+ function = "func2";
+
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active {
+ pins = "gpio18";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+ pins = "gpio20";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ input-disable;
+ output-low;
+ };
+
+ };
+
+ coincell@2800 {
+ status = "ok";
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 33002fed8cc3..d9019a49b292 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -18,27 +18,27 @@
#size-cells = <1>;
ranges;
- mpss@08000000 {
+ mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@00d100000 {
+ mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
- reserved@0d200000 {
+ reserved@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
- adsp_region: adsp@0dc00000 {
+ adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
- venus@0f500000 {
+ venus@f500000 {
reg = <0x0f500000 0x500000>;
no-map;
};
@@ -48,17 +48,17 @@
no-map;
};
- tz@0fc00000 {
+ tz@fc00000 {
reg = <0x0fc00000 0x160000>;
no-map;
};
- rfsa@0fd60000 {
+ rfsa@fd60000 {
reg = <0x0fd60000 0x20000>;
no-map;
};
- rmtfs@0fd80000 {
+ rmtfs@fd80000 {
reg = <0x0fd80000 0x180000>;
no-map;
};
@@ -614,6 +614,20 @@
status = "disabled";
};
+ sdhci@f9864900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+ <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC3_APPS_CLK>,
+ <&gcc GCC_SDCC3_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ status = "disabled";
+ };
+
sdhci@f98a4900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
new file mode 100644
index 000000000000..6740a4cb7da8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -0,0 +1,18 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ soc {
+ sdhci@f9824900 {
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+ <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+ clock-names = "core", "iface", "xo", "cal", "sleep";
+ };
+
+ clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8974pro";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index a1b2aef984f6..779f724b4531 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -11,6 +11,8 @@
/dts-v1/;
#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
model = "GR-Peach";
@@ -28,7 +30,6 @@
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x00a00000>;
-
};
lbsc {
@@ -51,6 +52,44 @@
reg = <0x00600000 0x00200000>;
};
};
+
+ leds {
+ status = "okay";
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ scif2_pins: serial2 {
+ /* P6_2 as RxD2; P6_3 as TxD2 */
+ pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
+ };
+
+ ether_pins: ether {
+ /* Ethernet on Ports 1,3,5,10 */
+ pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */
+ <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */
+ <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+ <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+ <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */
+ <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */
+ <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */
+ <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */
+ <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */
+ <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */
+ <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */
+ <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */
+ <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */
+ <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */
+ <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */
+ <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */
+ <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+ <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+ };
};
&extal_clk {
@@ -61,6 +100,38 @@
clock-frequency = <48000000>;
};
+&mtu2 {
+ status = "okay";
+};
+
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
&scif2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scif2_pins>;
+
+ status = "okay";
+};
+
+&ether {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ether_pins>;
+
status = "okay";
+
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 4ed12a4d9d51..ab9645a42eca 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -203,6 +203,7 @@
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <400000000>;
+ clocks = <&cpg_clocks R7S72100_CLK_I>;
next-level-cache = <&L2>;
};
};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 310222634570..dd4d09712a2a 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -27,6 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+ clocks = <&cpg_clocks R8A73A4_CLK_Z>;
clock-frequency = <1500000000>;
power-domains = <&pd_a2sl>;
next-level-cache = <&L2_CA15>;
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 000000000000..d90eb8464222
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,19 @@
+/*
+ * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+ model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
+ compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index 081af0192851..6aa6b7467704 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for the iWave-RZG1M Qseven carrier board
+ * Device Tree Source for the iWave-RZ/G1M Qseven board
*
* Copyright (C) 2017 Renesas Electronics Corp.
*
@@ -10,47 +10,9 @@
/dts-v1/;
#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
/ {
model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
-
- aliases {
- serial0 = &scif0;
- ethernet0 = &avb;
- };
-};
-
-&pfc {
- scif0_pins: scif0 {
- groups = "scif0_data_d";
- function = "scif0";
- };
-
- avb_pins: avb {
- groups = "avb_mdio", "avb_gmii";
- function = "avb";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy3>;
- phy-mode = "gmii";
- renesas,no-ether-link;
- status = "okay";
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- micrel,led-mode = <1>;
- };
};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index ff7993818637..75a8ca571846 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -9,6 +9,7 @@
*/
#include "r8a7743.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "iwave,g20m", "renesas,r8a7743";
@@ -42,6 +43,17 @@
groups = "mmc_data8_b", "mmc_ctrl";
function = "mmc";
};
+
+ qspi_pins: qspi {
+ groups = "qspi_ctrl", "qspi_data2";
+ function = "qspi";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
};
&mmcif0 {
@@ -53,3 +65,34 @@
non-removable;
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* WARNING - This device contains the bootloader. Handle with care. */
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 14222c72f0e0..7bbba4a36f31 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -25,6 +25,13 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &iic0;
+ i2c7 = &iic1;
+ i2c8 = &iic3;
+ spi0 = &qspi;
+ spi1 = &msiof0;
+ spi2 = &msiof1;
+ spi3 = &msiof2;
};
cpus {
@@ -56,6 +63,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
@@ -101,7 +109,7 @@
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -116,7 +124,7 @@
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -131,7 +139,7 @@
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -146,7 +154,7 @@
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -161,7 +169,7 @@
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -176,7 +184,7 @@
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -191,7 +199,7 @@
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -206,7 +214,7 @@
gpio7: gpio@e6055800 {
compatible = "renesas,gpio-r8a7743",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -348,6 +356,34 @@
dma-channels = <15>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7743-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a7743-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus
* numbers
*/
@@ -436,6 +472,58 @@
status = "disabled";
};
+ iic0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7743",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
+ };
+
+ iic1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7743",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 323>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
+ status = "disabled";
+ };
+
+ iic3: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7743",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7743",
"renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -779,6 +867,241 @@
max-frequency = <97500000>;
status = "disabled";
};
+
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7743", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 917>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7743",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 000>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 000>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7743",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 208>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7743",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 205>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 205>;
+ status = "disabled";
+ };
+
+ /*
+ * pci1 and xhci share the same phy, therefore only one of them
+ * can be active at any one time. If both of them are enabled,
+ * a race condition will determine who'll control the phy.
+ * A firmware file is needed by the xhci driver in order for
+ * USB 3.0 to work properly.
+ */
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7743",
+ "renesas,rcar-gen2-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7743";
+ reg = <0 0xee100000 0 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7743";
+ reg = <0 0xee140000 0 0x100>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7743";
+ reg = <0 0xee160000 0 0x100>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7743",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7743",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7743",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7743",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x10800 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x11000 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
};
/* External root clock */
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
new file mode 100644
index 000000000000..52153ec3638c
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -0,0 +1,109 @@
+/*
+ * Device Tree Source for the iWave-RZG1E SODIMM carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7745-iwg22m.dtsi"
+
+/ {
+ model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
+ compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
+
+ aliases {
+ serial0 = &scif4;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&pfc {
+ scif4_pins: scif4 {
+ groups = "scif4_data_b";
+ function = "scif4";
+ };
+
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&scif4 {
+ pinctrl-0 = <&scif4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ /*
+ * On some older versions of the platform (before R4.0) the phy address
+ * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
+ */
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
new file mode 100644
index 000000000000..ed9a8cf3fe36
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "r8a7745.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "iwave,g22m", "renesas,r8a7745";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x20000000>;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ mmcif0_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ };
+
+ qspi_pins: qspi {
+ groups = "qspi_ctrl", "qspi_data2";
+ function = "qspi";
+ };
+
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ i2c3_pins: i2c3 {
+ groups = "i2c3_b";
+ function = "i2c3";
+ };
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmcif0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* WARNING - This device contains the bootloader. Handle with care. */
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index aff90dfb8b32..3a50f703601c 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -18,6 +18,19 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ spi0 = &qspi;
+ spi1 = &msiof0;
+ spi2 = &msiof1;
+ spi3 = &msiof2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -65,6 +78,111 @@
resets = <&cpg 408>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7745",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
+ };
+
irqc: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7745", "renesas,irqc";
#interrupt-cells = <2>;
@@ -508,6 +626,317 @@
#size-cells = <0>;
status = "disabled";
};
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7745",
+ "renesas,etheravb-rcar-gen2";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7745",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 925>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7745",
+ "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 315>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
+ reg-io-width = <4>;
+ max-frequency = <97500000>;
+ status = "disabled";
+ };
+
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7745", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 917>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7745",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 000>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 000>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7745",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 208>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7745",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 205>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&cpg 205>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7745";
+ reg = <0 0xee100000 0 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7745";
+ reg = <0 0xee140000 0 0x100>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7745";
+ reg = <0 0xee160000 0 0x100>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7745",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7745",
+ "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x10800 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x11000 0 0 0 0>;
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7745",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
};
/* External root clock */
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 8f3156c0e575..a39472aab867 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -33,6 +33,7 @@
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <800000000>;
+ clocks = <&z_clk>;
};
};
@@ -88,7 +89,7 @@
};
gpio0: gpio@ffc40000 {
- compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
reg = <0xffc40000 0x2c>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -99,7 +100,7 @@
};
gpio1: gpio@ffc41000 {
- compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
reg = <0xffc41000 0x2c>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -110,7 +111,7 @@
};
gpio2: gpio@ffc42000 {
- compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
reg = <0xffc42000 0x2c>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -121,7 +122,7 @@
};
gpio3: gpio@ffc43000 {
- compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
reg = <0xffc43000 0x2c>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -132,7 +133,7 @@
};
gpio4: gpio@ffc44000 {
- compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
reg = <0xffc44000 0x2c>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8ee0b2ca5d39..e8eb94748b27 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -29,12 +29,14 @@
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <1000000000>;
+ clocks = <&cpg_clocks R8A7779_CLK_Z>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
clock-frequency = <1000000000>;
+ clocks = <&cpg_clocks R8A7779_CLK_Z>;
power-domains = <&sysc R8A7779_PD_ARM1>;
};
cpu@2 {
@@ -42,6 +44,7 @@
compatible = "arm,cortex-a9";
reg = <2>;
clock-frequency = <1000000000>;
+ clocks = <&cpg_clocks R8A7779_CLK_Z>;
power-domains = <&sysc R8A7779_PD_ARM2>;
};
cpu@3 {
@@ -49,6 +52,7 @@
compatible = "arm,cortex-a9";
reg = <3>;
clock-frequency = <1000000000>;
+ clocks = <&cpg_clocks R8A7779_CLK_Z>;
power-domains = <&sysc R8A7779_PD_ARM3>;
};
};
@@ -76,7 +80,7 @@
};
gpio0: gpio@ffc40000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc40000 0x2c>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -87,7 +91,7 @@
};
gpio1: gpio@ffc41000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc41000 0x2c>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -98,7 +102,7 @@
};
gpio2: gpio@ffc42000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc42000 0x2c>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -109,7 +113,7 @@
};
gpio3: gpio@ffc43000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc43000 0x2c>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -120,7 +124,7 @@
};
gpio4: gpio@ffc44000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc44000 0x2c>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -131,7 +135,7 @@
};
gpio5: gpio@ffc45000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc45000 0x2c>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -142,7 +146,7 @@
};
gpio6: gpio@ffc46000 {
- compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
reg = <0xffc46000 0x2c>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index ba100a6f67ca..e3d27783b6b5 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -316,11 +316,8 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7790_CLK_DU0>,
- <&mstp7_clks R8A7790_CLK_DU1>,
- <&mstp7_clks R8A7790_CLK_DU2>,
- <&mstp7_clks R8A7790_CLK_LVDS0>,
- <&mstp7_clks R8A7790_CLK_LVDS1>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
"dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 16358bf8d1db..2f017fee4009 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -10,7 +10,7 @@
* kind, whether express or implied.
*/
-#include <dt-bindings/clock/r8a7790-clock.h>
+#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/r8a7790-sysc.h>
@@ -52,10 +52,11 @@
reg = <0>;
clock-frequency = <1300000000>;
voltage-tolerance = <1>; /* 1% */
- clocks = <&cpg_clocks R8A7790_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>,
@@ -71,8 +72,10 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1300000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu2: cpu@2 {
@@ -80,8 +83,10 @@
compatible = "arm,cortex-a15";
reg = <2>;
clock-frequency = <1300000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu3: cpu@3 {
@@ -89,8 +94,10 @@
compatible = "arm,cortex-a15";
reg = <3>;
clock-frequency = <1300000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu4: cpu@100 {
@@ -98,8 +105,10 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <780000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu5: cpu@101 {
@@ -107,8 +116,10 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <780000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu6: cpu@102 {
@@ -116,8 +127,10 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <780000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu7: cpu@103 {
@@ -125,8 +138,10 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <780000000>;
+ clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
L2_CA15: cache-controller-0 {
@@ -185,13 +200,14 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>;
+ clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -199,12 +215,13 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+ clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -212,12 +229,13 @@
gpio-ranges = <&pfc 0 32 30>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+ clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -225,12 +243,13 @@
gpio-ranges = <&pfc 0 64 30>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+ clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -238,12 +257,13 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+ clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -251,12 +271,13 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+ clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
- compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -264,8 +285,9 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+ clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
thermal: thermal@e61f0000 {
@@ -274,8 +296,9 @@
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
@@ -292,9 +315,10 @@
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+ clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
@@ -312,9 +336,10 @@
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+ clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
@@ -330,8 +355,9 @@
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+ clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -358,9 +384,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -389,9 +416,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -418,9 +446,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
+ clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -447,9 +476,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
+ clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -460,8 +490,9 @@
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
- clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -472,8 +503,9 @@
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
- clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -484,8 +516,9 @@
compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+ clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -496,8 +529,9 @@
compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+ clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -508,8 +542,9 @@
compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+ clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -520,8 +555,9 @@
compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+ clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -533,11 +569,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+ clocks = <&cpg CPG_MOD 318>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>,
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -548,11 +585,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+ clocks = <&cpg CPG_MOD 323>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>,
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
status = "disabled";
};
@@ -563,11 +601,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+ clocks = <&cpg CPG_MOD 300>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
<&dmac1 0x69>, <&dmac1 0x6a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
status = "disabled";
};
@@ -578,11 +617,12 @@
"renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+ clocks = <&cpg CPG_MOD 926>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>,
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -590,11 +630,12 @@
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ clocks = <&cpg CPG_MOD 315>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -604,11 +645,12 @@
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
+ clocks = <&cpg CPG_MOD 305>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
<&dmac1 0xe1>, <&dmac1 0xe2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 305>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -623,12 +665,13 @@
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+ clocks = <&cpg CPG_MOD 314>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
<&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -636,12 +679,13 @@
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x328>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
+ clocks = <&cpg CPG_MOD 313>;
dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
<&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -649,12 +693,13 @@
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+ clocks = <&cpg CPG_MOD 312>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
<&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -662,12 +707,13 @@
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
+ clocks = <&cpg CPG_MOD 311>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
<&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -676,12 +722,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+ clocks = <&cpg CPG_MOD 204>;
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>,
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -690,12 +737,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+ clocks = <&cpg CPG_MOD 203>;
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>,
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -704,12 +752,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+ clocks = <&cpg CPG_MOD 202>;
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>,
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -718,12 +767,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+ clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -732,12 +782,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+ clocks = <&cpg CPG_MOD 207>;
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -746,12 +797,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+ clocks = <&cpg CPG_MOD 216>;
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -760,13 +812,14 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7790_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -775,13 +828,14 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7790_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -790,13 +844,14 @@
"renesas,scif";
reg = <0 0xe6e56000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 310>, <&cpg CPG_CORE R8A7790_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
status = "disabled";
};
@@ -805,13 +860,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7790_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -820,13 +876,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7790_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -852,8 +909,9 @@
compatible = "renesas,ether-r8a7790";
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -865,8 +923,9 @@
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+ clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -876,8 +935,9 @@
compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+ clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
status = "disabled";
};
@@ -885,8 +945,9 @@
compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+ clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 814>;
status = "disabled";
};
@@ -894,11 +955,12 @@
compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -911,9 +973,10 @@
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
usb0: usb-channel@0 {
@@ -930,8 +993,9 @@
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -939,8 +1003,9 @@
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -948,8 +1013,9 @@
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
status = "disabled";
};
@@ -957,41 +1023,46 @@
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ clocks = <&cpg CPG_MOD 808>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
status = "disabled";
};
- vsp1@fe920000 {
+ vsp@fe920000 {
compatible = "renesas,vsp1";
reg = <0 0xfe920000 0 0x8000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+ clocks = <&cpg CPG_MOD 130>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 130>;
};
- vsp1@fe928000 {
+ vsp@fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+ clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
};
- vsp1@fe930000 {
+ vsp@fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+ clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
};
- vsp1@fe938000 {
+ vsp@fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+ clocks = <&cpg CPG_MOD 127>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
};
du: display@feb00000 {
@@ -1003,11 +1074,9 @@
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_DU0>,
- <&mstp7_clks R8A7790_CLK_DU1>,
- <&mstp7_clks R8A7790_CLK_DU2>,
- <&mstp7_clks R8A7790_CLK_LVDS0>,
- <&mstp7_clks R8A7790_CLK_LVDS1>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>,
+ <&cpg CPG_MOD 725>;
clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
status = "disabled";
@@ -1037,10 +1106,11 @@
compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
- <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7790_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -1048,10 +1118,11 @@
compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
- <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7790_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -1059,443 +1130,77 @@
compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+ clocks = <&cpg CPG_MOD 106>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 106>;
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7790-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk &usb_extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "sd1",
- "z", "rcan", "adsp";
- #power-domain-cells = <0>;
- };
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Variable factor clocks */
- sd2_clk: sd2@e6150078 {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150078 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- sd3_clk: sd3@e615026c {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615026c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- mmc0_clk: mmc0@e6150240 {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150240 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- mmc1_clk: mmc1@e6150244 {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150244 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- ssp_clk: ssp@e6150248 {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150248 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- ssprs_clk: ssprs@e615024c {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615024c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
- /* Fixed factor clocks */
- pll1_div2_clk: pll1_div2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- z2_clk: z2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- zg_clk: zg {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zx_clk: zx {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zs_clk: zs {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- hp_clk: hp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- i_clk: i {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- b_clk: b {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- p_clk: p {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <24>;
- clock-mult = <1>;
- };
- cl_clk: cl {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <48>;
- clock-mult = <1>;
- };
- m2_clk: m2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- imp_clk: imp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- rclk_clk: rclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(48 * 1024)>;
- clock-mult = <1>;
- };
- oscclk_clk: oscclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(12 * 1024)>;
- clock-mult = <1>;
- };
- zb3_clk: zb3 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- zb3d2_clk: zb3d2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- ddr_clk: ddr {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- mp_clk: mp {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <15>;
- clock-mult = <1>;
- };
- cp_clk: cp {
- compatible = "fixed-factor-clock";
- clocks = <&extal_clk>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Gate clocks */
- mstp0_clks: mstp0_clks@e6150130 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
- clocks = <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7790_CLK_MSIOF0>;
- clock-output-names = "msiof0";
- };
- mstp1_clks: mstp1_clks@e6150134 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>,
- <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>,
- <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
- R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
- R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
- R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0
- R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0
- R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0
- R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
- >;
- clock-output-names =
- "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1",
- "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1",
- "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0",
- "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy";
- };
- mstp2_clks: mstp2_clks@e6150138 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
- <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
- R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
- R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
- R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
- >;
- clock-output-names =
- "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "msiof3", "scifb2",
- "sys-dmac1", "sys-dmac0";
- };
- mstp3_clks: mstp3_clks@e615013c {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>,
- <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
- <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3
- R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
- R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
- R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
- >;
- clock-output-names =
- "iic2", "tpu0", "mmcif1", "scif2", "sdhi3",
- "sdhi2", "sdhi1", "sdhi0", "mmcif0",
- "iic0", "pciec", "iic1", "ssusb", "cmt1",
- "usbdmac0", "usbdmac1";
- };
- mstp4_clks: mstp4_clks@e6150140 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7790_CLK_IRQC R8A7790_CLK_INTC_SYS>;
- clock-output-names = "irqc", "intc-sys";
- };
- mstp5_clks: mstp5_clks@e6150144 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>,
- <&extal_clk>, <&p_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
- R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL
- R8A7790_CLK_PWM
- >;
- clock-output-names = "audmac0", "audmac1", "adsp_mod",
- "thermal", "pwm";
- };
- mstp7_clks: mstp7_clks@e615014c {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
- <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
- <&zx_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
- R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
- R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
- R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
- >;
- clock-output-names =
- "ehci", "hsusb", "hscif1", "hscif0", "scif1",
- "scif0", "du2", "du1", "du0", "lvds1", "lvds0";
- };
- mstp8_clks: mstp8_clks@e6150990 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
- R8A7790_CLK_VIN1 R8A7790_CLK_VIN0
- R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER
- R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
- >;
- clock-output-names =
- "mlb", "vin3", "vin2", "vin1", "vin0",
- "etheravb", "ether", "sata1", "sata0";
- };
- mstp9_clks: mstp9_clks@e6150994 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
- R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
- R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
- R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
- >;
- clock-output-names =
- "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
- "rcan1", "rcan0", "qspi_mod", "iic3",
- "i2c3", "i2c2", "i2c1", "i2c0";
- };
- mstp10_clks: mstp10_clks@e6150998 {
- compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
- clocks = <&p_clk>,
- <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&p_clk>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
- <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
-
- #clock-cells = <1>;
- clock-indices = <
- R8A7790_CLK_SSI_ALL
- R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
- R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
- R8A7790_CLK_SCU_ALL
- R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
- R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0
- R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
- R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
- >;
- clock-output-names =
- "ssi-all",
- "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
- "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
- "scu-all",
- "scu-dvc1", "scu-dvc0",
- "scu-ctu1-mix1", "scu-ctu0-mix0",
- "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
- "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
- };
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7790-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
prr: chipid@ff000044 {
@@ -1518,11 +1223,12 @@
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ clocks = <&cpg CPG_MOD 917>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1534,11 +1240,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ clocks = <&cpg CPG_MOD 0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>,
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1549,11 +1256,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ clocks = <&cpg CPG_MOD 208>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>,
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1564,11 +1272,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ clocks = <&cpg CPG_MOD 205>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>,
<&dmac1 0x41>, <&dmac1 0x42>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 205>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1579,11 +1288,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6c90000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ clocks = <&cpg CPG_MOD 215>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>,
<&dmac1 0x45>, <&dmac1 0x46>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 215>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1593,8 +1303,9 @@
compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1606,8 +1317,9 @@
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <0 0>;
@@ -1639,8 +1351,9 @@
reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <1 1>;
@@ -1657,8 +1370,9 @@
pci2: pci@ee0d0000 {
compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1707,9 +1421,10 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
};
@@ -1728,21 +1443,22 @@
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
- clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
- <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
- <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
- <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
- <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7790_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
@@ -1753,6 +1469,13 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0ce0b278e1cb..e164eda69baf 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -330,9 +330,7 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7791_CLK_DU0>,
- <&mstp7_clks R8A7791_CLK_DU1>,
- <&mstp7_clks R8A7791_CLK_LVDS0>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 95da5cb9d37a..eb374956294f 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -419,9 +419,7 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7791_CLK_DU0>,
- <&mstp7_clks R8A7791_CLK_DU1>,
- <&mstp7_clks R8A7791_CLK_LVDS0>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
<&x3_clk>, <&x16_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index f1d1a9772153..67831d0405f3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -10,7 +10,7 @@
* kind, whether express or implied.
*/
-#include <dt-bindings/clock/r8a7791-clock.h>
+#include <dt-bindings/clock/r8a7791-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/r8a7791-sysc.h>
@@ -51,7 +51,7 @@
reg = <0>;
clock-frequency = <1500000000>;
voltage-tolerance = <1>; /* 1% */
- clocks = <&cpg_clocks R8A7791_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
@@ -70,6 +70,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
@@ -117,13 +118,14 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&mstp4_clks R8A7791_CLK_INTC_SYS>;
+ clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -131,12 +133,13 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
+ clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -144,12 +147,13 @@
gpio-ranges = <&pfc 0 32 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
+ clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -157,12 +161,13 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
+ clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -170,12 +175,13 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
+ clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -183,12 +189,13 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
+ clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -196,12 +203,13 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
+ clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -209,12 +217,13 @@
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
+ clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
gpio7: gpio@e6055800 {
- compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -222,8 +231,9 @@
gpio-ranges = <&pfc 0 224 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
+ clocks = <&cpg CPG_MOD 904>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
};
thermal: thermal@e61f0000 {
@@ -232,8 +242,9 @@
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
+ clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
@@ -250,9 +261,10 @@
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
+ clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
@@ -270,9 +282,10 @@
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
+ clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
@@ -294,8 +307,9 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
+ clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -322,9 +336,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+ clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -353,9 +368,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+ clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -382,9 +398,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
+ clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -411,9 +428,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
+ clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -424,8 +442,9 @@
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
- clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+ clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -436,8 +455,9 @@
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
- clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+ clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -449,8 +469,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -461,8 +482,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+ clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -473,8 +495,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+ clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -485,8 +508,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+ clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -497,8 +521,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+ clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -510,8 +535,9 @@
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+ clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -524,11 +550,12 @@
"renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+ clocks = <&cpg CPG_MOD 926>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>,
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -539,11 +566,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+ clocks = <&cpg CPG_MOD 318>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>,
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -554,11 +582,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+ clocks = <&cpg CPG_MOD 323>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>,
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
status = "disabled";
};
@@ -571,11 +600,12 @@
compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
+ clocks = <&cpg CPG_MOD 315>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -585,12 +615,13 @@
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
+ clocks = <&cpg CPG_MOD 314>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
<&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -598,12 +629,13 @@
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
+ clocks = <&cpg CPG_MOD 312>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
<&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -611,12 +643,13 @@
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
+ clocks = <&cpg CPG_MOD 311>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
<&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -625,12 +658,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+ clocks = <&cpg CPG_MOD 204>;
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>,
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -639,12 +673,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+ clocks = <&cpg CPG_MOD 203>;
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>,
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -653,12 +688,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+ clocks = <&cpg CPG_MOD 202>;
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>,
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -667,12 +703,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+ clocks = <&cpg CPG_MOD 1106>;
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -681,12 +718,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+ clocks = <&cpg CPG_MOD 1107>;
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -695,12 +733,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+ clocks = <&cpg CPG_MOD 1108>;
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>,
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -709,12 +748,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+ clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -723,12 +763,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+ clocks = <&cpg CPG_MOD 207>;
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -737,12 +778,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+ clocks = <&cpg CPG_MOD 216>;
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -751,13 +793,14 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -766,22 +809,24 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
adc: adc@e6e54000 {
compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
reg = <0 0xe6e54000 0 64>;
- clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
+ clocks = <&cpg CPG_MOD 901>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 901>;
status = "disabled";
};
@@ -790,13 +835,14 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -805,13 +851,14 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -820,13 +867,14 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -835,13 +883,14 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -850,13 +899,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -865,13 +915,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -880,13 +931,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -912,8 +964,9 @@
compatible = "renesas,ether-r8a7791";
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+ clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -925,8 +978,9 @@
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
+ clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -936,8 +990,9 @@
compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+ clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
status = "disabled";
};
@@ -945,8 +1000,9 @@
compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+ clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 814>;
status = "disabled";
};
@@ -954,11 +1010,12 @@
compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -971,9 +1028,10 @@
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
usb0: usb-channel@0 {
@@ -990,8 +1048,9 @@
compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+ clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -999,8 +1058,9 @@
compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+ clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -1008,33 +1068,37 @@
compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+ clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
status = "disabled";
};
- vsp1@fe928000 {
+ vsp@fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+ clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
};
- vsp1@fe930000 {
+ vsp@fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+ clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
};
- vsp1@fe938000 {
+ vsp@fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+ clocks = <&cpg CPG_MOD 127>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
};
du: display@feb00000 {
@@ -1044,9 +1108,9 @@
reg-names = "du", "lvds.0";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_DU0>,
- <&mstp7_clks R8A7791_CLK_DU1>,
- <&mstp7_clks R8A7791_CLK_LVDS0>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 726>;
clock-names = "du.0", "du.1", "lvds.0";
status = "disabled";
@@ -1071,10 +1135,11 @@
compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
- <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7791_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -1082,10 +1147,11 @@
compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
- <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7791_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -1093,435 +1159,78 @@
compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7791_CLK_JPU>;
+ clocks = <&cpg CPG_MOD 106>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 106>;
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7791-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk &usb_extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z",
- "rcan", "adsp";
- #power-domain-cells = <0>;
- };
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Variable factor clocks */
- sd2_clk: sd2@e6150078 {
- compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150078 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- sd3_clk: sd3@e615026c {
- compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615026c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- mmc0_clk: mmc0@e6150240 {
- compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150240 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- ssp_clk: ssp@e6150248 {
- compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150248 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- ssprs_clk: ssprs@e615024c {
- compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615024c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
- /* Fixed factor clocks */
- pll1_div2_clk: pll1_div2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- zg_clk: zg {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zx_clk: zx {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zs_clk: zs {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- hp_clk: hp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- i_clk: i {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- b_clk: b {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- p_clk: p {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <24>;
- clock-mult = <1>;
- };
- cl_clk: cl {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <48>;
- clock-mult = <1>;
- };
- m2_clk: m2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- rclk_clk: rclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(48 * 1024)>;
- clock-mult = <1>;
- };
- oscclk_clk: oscclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(12 * 1024)>;
- clock-mult = <1>;
- };
- zb3_clk: zb3 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- zb3d2_clk: zb3d2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- ddr_clk: ddr {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- mp_clk: mp {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <15>;
- clock-mult = <1>;
- };
- cp_clk: cp {
- compatible = "fixed-factor-clock";
- clocks = <&extal_clk>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Gate clocks */
- mstp0_clks: mstp0_clks@e6150130 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
- clocks = <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7791_CLK_MSIOF0>;
- clock-output-names = "msiof0";
- };
- mstp1_clks: mstp1_clks@e6150134 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>,
- <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
- <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
- <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
- R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
- R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
- R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0
- R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0
- R8A7791_CLK_VSP1_S
- >;
- clock-output-names =
- "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg",
- "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0",
- "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy";
- };
- mstp2_clks: mstp2_clks@e6150138 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
- R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
- R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
- R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
- >;
- clock-output-names =
- "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "scifb2",
- "sys-dmac1", "sys-dmac0";
- };
- mstp3_clks: mstp3_clks@e615013c {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
- <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
- R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
- R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
- R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1
- >;
- clock-output-names =
- "tpu0", "sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
- "usbdmac0", "usbdmac1";
- };
- mstp4_clks: mstp4_clks@e6150140 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7791_CLK_IRQC R8A7791_CLK_INTC_SYS>;
- clock-output-names = "irqc", "intc-sys";
- };
- mstp5_clks: mstp5_clks@e6150144 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>,
- <&extal_clk>, <&p_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
- R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL
- R8A7791_CLK_PWM
- >;
- clock-output-names = "audmac0", "audmac1", "adsp_mod",
- "thermal", "pwm";
- };
- mstp7_clks: mstp7_clks@e615014c {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&zx_clk>, <&zx_clk>, <&zx_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
- R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
- R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
- R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
- R8A7791_CLK_LVDS0
- >;
- clock-output-names =
- "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
- "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
- };
- mstp8_clks: mstp8_clks@e6150990 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
- R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
- R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER
- R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
- >;
- clock-output-names =
- "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0",
- "etheravb", "ether", "sata1", "sata0";
- };
- mstp9_clks: mstp9_clks@e6150994 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&p_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
- <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_GYROADC
- R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
- R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
- R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
- R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
- R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
- >;
- clock-output-names =
- "gyroadc",
- "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
- "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
- "i2c1", "i2c0";
- };
- mstp10_clks: mstp10_clks@e6150998 {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
- clocks = <&p_clk>,
- <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&p_clk>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
- <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
-
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_SSI_ALL
- R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5
- R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
- R8A7791_CLK_SCU_ALL
- R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
- R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0
- R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
- R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
- >;
- clock-output-names =
- "ssi-all",
- "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
- "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
- "scu-all",
- "scu-dvc1", "scu-dvc0",
- "scu-ctu1-mix1", "scu-ctu0-mix0",
- "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
- "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
- };
- mstp11_clks: mstp11_clks@e615099c {
- compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
- >;
- clock-output-names = "scifa3", "scifa4", "scifa5";
- };
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7791-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller@e6160000 {
@@ -1544,11 +1253,12 @@
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ clocks = <&cpg CPG_MOD 917>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1560,11 +1270,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ clocks = <&cpg CPG_MOD 000>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>,
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1575,11 +1286,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+ clocks = <&cpg CPG_MOD 208>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>,
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1590,11 +1302,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+ clocks = <&cpg CPG_MOD 205>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>,
<&dmac1 0x41>, <&dmac1 0x42>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 205>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1604,8 +1317,9 @@
compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+ clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1617,8 +1331,9 @@
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <0 0>;
@@ -1650,8 +1365,9 @@
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <1 1>;
@@ -1697,9 +1413,10 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
};
@@ -1778,21 +1495,22 @@
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
- clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>,
- <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>,
- <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>,
- <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>,
- <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>,
- <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>,
- <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7791_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
@@ -1803,6 +1521,13 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index f3ea43b7b724..9b67dca6c9ef 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -310,8 +310,7 @@
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
- clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
- <&x1_clk>, <&x2_clk>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index c24f26fdab1f..b9471b67b728 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -305,8 +305,7 @@
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
- clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
- <&osc2_clk>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 2623f39bed2b..131f65b0426e 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -8,7 +8,7 @@
* kind, whether express or implied.
*/
-#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/clock/r8a7792-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7792-sysc.h>
@@ -46,7 +46,7 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1000000000>;
- clocks = <&z_clk>;
+ clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
};
@@ -56,6 +56,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
@@ -92,9 +93,10 @@
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&mstp4_clks R8A7792_CLK_INTC_SYS>;
+ clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
irqc: interrupt-controller@e61c0000 {
@@ -106,8 +108,9 @@
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+ clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
timer {
@@ -145,7 +148,7 @@
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -153,13 +156,14 @@
gpio-ranges = <&pfc 0 0 29>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+ clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -167,13 +171,14 @@
gpio-ranges = <&pfc 0 32 23>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+ clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -181,13 +186,14 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+ clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -195,13 +201,14 @@
gpio-ranges = <&pfc 0 96 28>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+ clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -209,13 +216,14 @@
gpio-ranges = <&pfc 0 128 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+ clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -223,13 +231,14 @@
gpio-ranges = <&pfc 0 160 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+ clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055100 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055100 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -237,13 +246,14 @@
gpio-ranges = <&pfc 0 192 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+ clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
gpio7: gpio@e6055200 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055200 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -251,13 +261,14 @@
gpio-ranges = <&pfc 0 224 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+ clocks = <&cpg CPG_MOD 904>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
};
gpio8: gpio@e6055300 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055300 0 0x50>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -265,13 +276,14 @@
gpio-ranges = <&pfc 0 256 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+ clocks = <&cpg CPG_MOD 921>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 921>;
};
gpio9: gpio@e6055400 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -279,13 +291,14 @@
gpio-ranges = <&pfc 0 288 17>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+ clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
};
gpio10: gpio@e6055500 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055500 0 0x50>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -293,13 +306,14 @@
gpio-ranges = <&pfc 0 320 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+ clocks = <&cpg CPG_MOD 914>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
};
gpio11: gpio@e6055600 {
compatible = "renesas,gpio-r8a7792",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen2-gpio";
reg = <0 0xe6055600 0 0x50>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -307,8 +321,9 @@
gpio-ranges = <&pfc 0 352 30>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+ clocks = <&cpg CPG_MOD 913>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 913>;
};
dmac0: dma-controller@e6700000 {
@@ -336,9 +351,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+ clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -368,9 +384,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+ clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -380,13 +397,14 @@
"renesas,rcar-gen2-scif", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -395,13 +413,14 @@
"renesas,rcar-gen2-scif", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -410,13 +429,14 @@
"renesas,rcar-gen2-scif", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -425,13 +445,14 @@
"renesas,rcar-gen2-scif", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -440,13 +461,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -455,13 +477,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
- <&scif_clk>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -490,8 +513,9 @@
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
<&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx", "tx", "rx";
- clocks = <&mstp3_clks R8A7792_CLK_SDHI0>;
+ clocks = <&cpg CPG_MOD 314>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -500,8 +524,9 @@
"renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7792_CLK_JPU>;
+ clocks = <&cpg CPG_MOD 106>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 106>;
};
avb: ethernet@e6800000 {
@@ -509,8 +534,9 @@
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>;
+ clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -522,8 +548,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C0>;
+ clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -535,8 +562,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C1>;
+ clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -548,8 +576,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C2>;
+ clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -561,8 +590,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C3>;
+ clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -574,8 +604,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C4>;
+ clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
i2c-scl-internal-delay-ns = <6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -587,8 +618,9 @@
"renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_I2C5>;
+ clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
i2c-scl-internal-delay-ns = <110>;
#address-cells = <1>;
#size-cells = <0>;
@@ -599,11 +631,12 @@
compatible = "renesas,qspi-r8a7792", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>;
+ clocks = <&cpg CPG_MOD 917>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -615,11 +648,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>;
+ clocks = <&cpg CPG_MOD 000>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>,
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -630,11 +664,12 @@
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>;
+ clocks = <&cpg CPG_MOD 208>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>,
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -646,8 +681,8 @@
reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7792_CLK_DU0>,
- <&mstp7_clks R8A7792_CLK_DU1>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
status = "disabled";
@@ -673,10 +708,11 @@
"renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_CAN0>,
- <&rcan_clk>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -685,10 +721,11 @@
"renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7792_CLK_CAN1>,
- <&rcan_clk>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -697,8 +734,9 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN0>;
+ clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -707,8 +745,9 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN1>;
+ clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -717,8 +756,9 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN2>;
+ clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
status = "disabled";
};
@@ -727,8 +767,9 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN3>;
+ clocks = <&cpg CPG_MOD 808>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
status = "disabled";
};
@@ -737,8 +778,9 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef4000 0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN4>;
+ clocks = <&cpg CPG_MOD 805>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
status = "disabled";
};
@@ -747,254 +789,47 @@
"renesas,rcar-gen2-vin";
reg = <0 0xe6ef5000 0 0x1000>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7792_CLK_VIN5>;
+ clocks = <&cpg CPG_MOD 804>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
status = "disabled";
};
- vsp1@fe928000 {
+ vsp@fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>;
+ clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
};
- vsp1@fe930000 {
+ vsp@fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>;
+ clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
};
- vsp1@fe938000 {
+ vsp@fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>;
+ clocks = <&cpg CPG_MOD 127>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
};
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7792-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7792-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi";
+ clock-names = "extal";
+ #clock-cells = <2>;
#power-domain-cells = <0>;
};
-
- /* Fixed factor clocks */
- pll1_div2_clk: pll1_div2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- z_clk: z {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL0>;
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- };
- zx_clk: zx {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zs_clk: zs {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- hp_clk: hp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- p_clk: p {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <24>;
- clock-mult = <1>;
- };
- cp_clk: cp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <48>;
- clock-mult = <1>;
- };
- mp_clk: mp {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <15>;
- clock-mult = <1>;
- };
- m2_clk: m2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- sd_clk: sd {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- rcan_clk: rcan {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <49>;
- clock-mult = <1>;
- };
- zg_clk: zg {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <5>;
- clock-mult = <1>;
- };
-
- /* Gate clocks */
- mstp0_clks: mstp0_clks@e6150130 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
- clocks = <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7792_CLK_MSIOF0>;
- clock-output-names = "msiof0";
- };
- mstp1_clks: mstp1_clks@e6150134 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_JPU
- R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0
- R8A7792_CLK_VSP1_SY
- >;
- clock-output-names = "jpu", "vsp1du1", "vsp1du0",
- "vsp1-sy";
- };
- mstp2_clks: mstp2_clks@e6150138 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_MSIOF1
- R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
- >;
- clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0";
- };
- mstp3_clks: mstp3_clks@e615013c {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&sd_clk>;
- #clock-cells = <1>;
- renesas,clock-indices = <R8A7792_CLK_SDHI0>;
- clock-output-names = "sdhi0";
- };
- mstp4_clks: mstp4_clks@e6150140 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_IRQC R8A7792_CLK_INTC_SYS
- >;
- clock-output-names = "irqc", "intc-sys";
- };
- mstp7_clks: mstp7_clks@e615014c {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
- <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
- R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
- R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
- R8A7792_CLK_DU1 R8A7792_CLK_DU0
- >;
- clock-output-names = "hscif1", "hscif0", "scif3",
- "scif2", "scif1", "scif0",
- "du1", "du0";
- };
- mstp8_clks: mstp8_clks@e6150990 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&zg_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_VIN5 R8A7792_CLK_VIN4
- R8A7792_CLK_VIN3 R8A7792_CLK_VIN2
- R8A7792_CLK_VIN1 R8A7792_CLK_VIN0
- R8A7792_CLK_ETHERAVB
- >;
- clock-output-names = "vin5", "vin4", "vin3", "vin2",
- "vin1", "vin0", "etheravb";
- };
- mstp9_clks: mstp9_clks@e6150994 {
- compatible = "renesas,r8a7792-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
- <&cpg_clocks R8A7792_CLK_QSPI>,
- <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
- R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4
- R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
- R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
- R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
- R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
- R8A7792_CLK_QSPI_MOD
- R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8
- R8A7792_CLK_I2C5 R8A7792_CLK_I2C4
- R8A7792_CLK_I2C3 R8A7792_CLK_I2C2
- R8A7792_CLK_I2C1 R8A7792_CLK_I2C0
- >;
- clock-output-names =
- "gpio7", "gpio6", "gpio5", "gpio4",
- "gpio3", "gpio2", "gpio1", "gpio0",
- "gpio11", "gpio10", "can1", "can0",
- "qspi_mod", "gpio9", "gpio8",
- "i2c5", "i2c4", "i2c3", "i2c2",
- "i2c1", "i2c0";
- };
};
/* External root clock */
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 76e3aca2029e..51b3ffac8efa 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -303,9 +303,7 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7793_CLK_DU0>,
- <&mstp7_clks R8A7793_CLK_DU1>,
- <&mstp7_clks R8A7793_CLK_LVDS0>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 497716b6fbe2..58eae569b4e0 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -8,7 +8,7 @@
* kind, whether express or implied.
*/
-#include <dt-bindings/clock/r8a7793-clock.h>
+#include <dt-bindings/clock/r8a7793-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/r8a7793-sysc.h>
@@ -43,7 +43,7 @@
reg = <0>;
clock-frequency = <1500000000>;
voltage-tolerance = <1>; /* 1% */
- clocks = <&cpg_clocks R8A7793_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
@@ -62,6 +62,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
};
@@ -108,13 +109,14 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&mstp4_clks R8A7793_CLK_INTC_SYS>;
+ clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -122,12 +124,13 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+ clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -135,12 +138,13 @@
gpio-ranges = <&pfc 0 32 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+ clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -148,12 +152,13 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+ clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -161,12 +166,13 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+ clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -174,12 +180,13 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+ clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -187,12 +194,13 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+ clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -200,12 +208,13 @@
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+ clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
gpio7: gpio@e6055800 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -213,8 +222,9 @@
gpio-ranges = <&pfc 0 224 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+ clocks = <&cpg CPG_MOD 904>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
};
thermal: thermal@e61f0000 {
@@ -223,8 +233,9 @@
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+ clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
@@ -241,9 +252,10 @@
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
+ clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
@@ -261,9 +273,10 @@
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
+ clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
@@ -285,8 +298,9 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+ clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -313,9 +327,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -344,9 +359,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -373,9 +389,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
+ clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -402,9 +419,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
+ clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -416,8 +434,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -428,8 +447,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -440,8 +460,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -452,8 +473,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -464,8 +486,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -477,8 +500,9 @@
compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -491,11 +515,12 @@
"renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ clocks = <&cpg CPG_MOD 926>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>,
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -506,11 +531,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ clocks = <&cpg CPG_MOD 318>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>,
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -521,11 +547,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ clocks = <&cpg CPG_MOD 323>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>,
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
status = "disabled";
};
@@ -538,12 +565,13 @@
compatible = "renesas,sdhi-r8a7793";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
+ clocks = <&cpg CPG_MOD 314>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
<&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -551,12 +579,13 @@
compatible = "renesas,sdhi-r8a7793";
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
+ clocks = <&cpg CPG_MOD 312>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
<&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -564,12 +593,13 @@
compatible = "renesas,sdhi-r8a7793";
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
+ clocks = <&cpg CPG_MOD 311>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
<&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -577,11 +607,12 @@
compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+ clocks = <&cpg CPG_MOD 315>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -592,12 +623,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
+ clocks = <&cpg CPG_MOD 204>;
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>,
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -606,12 +638,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
+ clocks = <&cpg CPG_MOD 203>;
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>,
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -620,12 +653,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
+ clocks = <&cpg CPG_MOD 202>;
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>,
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -634,12 +668,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
+ clocks = <&cpg CPG_MOD 1106>;
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -648,12 +683,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
+ clocks = <&cpg CPG_MOD 1107>;
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -662,12 +698,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
+ clocks = <&cpg CPG_MOD 1108>;
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>,
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -676,12 +713,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
+ clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -690,12 +728,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
+ clocks = <&cpg CPG_MOD 207>;
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -704,12 +743,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
+ clocks = <&cpg CPG_MOD 216>;
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -718,13 +758,14 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -733,13 +774,14 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -748,13 +790,14 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -763,13 +806,14 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -778,13 +822,14 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -793,13 +838,14 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -808,13 +854,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -823,13 +870,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -838,13 +886,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -870,8 +919,9 @@
compatible = "renesas,ether-r8a7793";
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+ clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -882,8 +932,9 @@
compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7793_CLK_VIN0>;
+ clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -891,8 +942,9 @@
compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7793_CLK_VIN1>;
+ clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -900,8 +952,9 @@
compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7793_CLK_VIN2>;
+ clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
status = "disabled";
};
@@ -909,11 +962,12 @@
compatible = "renesas,qspi-r8a7793", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+ clocks = <&cpg CPG_MOD 917>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -927,9 +981,9 @@
reg-names = "du", "lvds.0";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_DU0>,
- <&mstp7_clks R8A7793_CLK_DU1>,
- <&mstp7_clks R8A7793_CLK_LVDS0>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 726>;
clock-names = "du.0", "du.1", "lvds.0";
status = "disabled";
@@ -954,10 +1008,11 @@
compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
- <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -965,376 +1020,74 @@
compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
- <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7793-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk &usb_extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z",
- "rcan", "adsp";
- #power-domain-cells = <0>;
- };
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
- /* Variable factor clocks */
- sd2_clk: sd2@e6150078 {
- compatible = "renesas,r8a7793-div6-clock",
- "renesas,cpg-div6-clock";
- reg = <0 0xe6150078 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- sd3_clk: sd3@e615026c {
- compatible = "renesas,r8a7793-div6-clock",
- "renesas,cpg-div6-clock";
- reg = <0 0xe615026c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- mmc0_clk: mmc0@e6150240 {
- compatible = "renesas,r8a7793-div6-clock",
- "renesas,cpg-div6-clock";
- reg = <0 0xe6150240 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Fixed factor clocks */
- pll1_div2_clk: pll1_div2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- zg_clk: zg {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <5>;
- clock-mult = <1>;
- };
- zx_clk: zx {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zs_clk: zs {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- hp_clk: hp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- p_clk: p {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <24>;
- clock-mult = <1>;
- };
- m2_clk: m2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- rclk_clk: rclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(48 * 1024)>;
- clock-mult = <1>;
- };
- mp_clk: mp {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <15>;
- clock-mult = <1>;
- };
- cp_clk: cp {
- compatible = "fixed-factor-clock";
- clocks = <&extal_clk>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Gate clocks */
- mstp1_clks: mstp1_clks@e6150134 {
- compatible = "renesas,r8a7793-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
- <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
- <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
- <&zs_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_VCP0 R8A7793_CLK_VPC0
- R8A7793_CLK_SSP1 R8A7793_CLK_TMU1
- R8A7793_CLK_3DG R8A7793_CLK_2DDMAC
- R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0
- R8A7793_CLK_TMU3 R8A7793_CLK_TMU2
- R8A7793_CLK_CMT0 R8A7793_CLK_TMU0
- R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0
- R8A7793_CLK_VSP1_S
- >;
- clock-output-names =
- "vcp0", "vpc0", "ssp_dev", "tmu1",
- "pvrsrvkm", "tddmac", "fdp1", "fdp0",
- "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
- "vsp1-du0", "vsps";
- };
- mstp2_clks: mstp2_clks@e6150138 {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0
- R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2
- R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
- >;
- clock-output-names =
- "scifa2", "scifa1", "scifa0", "scifb0",
- "scifb1", "scifb2", "sys-dmac1", "sys-dmac0";
- };
- mstp3_clks: mstp3_clks@e615013c {
- compatible = "renesas,r8a7793-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
- <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>,
- <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
- <&rclk_clk>, <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2
- R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0
- R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0
- R8A7793_CLK_PCIEC R8A7793_CLK_IIC1
- R8A7793_CLK_SSUSB R8A7793_CLK_CMT1
- R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1
- >;
- clock-output-names =
- "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0",
- "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
- "usbdmac0", "usbdmac1";
- };
- mstp4_clks: mstp4_clks@e6150140 {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_IRQC R8A7793_CLK_INTC_SYS
- >;
- clock-output-names = "irqc", "intc-sys";
- };
- mstp5_clks: mstp5_clks@e6150144 {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1
- R8A7793_CLK_THERMAL>;
- clock-output-names = "audmac0", "audmac1", "thermal";
- };
- mstp7_clks: mstp7_clks@e615014c {
- compatible = "renesas,r8a7793-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>,
- <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>,
- <&zx_clk>, <&zx_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_EHCI R8A7793_CLK_HSUSB
- R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5
- R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1
- R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3
- R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1
- R8A7793_CLK_SCIF0 R8A7793_CLK_DU1
- R8A7793_CLK_DU0 R8A7793_CLK_LVDS0
- >;
- clock-output-names =
- "ehci", "hsusb", "hscif2", "scif5", "scif4",
- "hscif1", "hscif0", "scif3", "scif2",
- "scif1", "scif0", "du1", "du0", "lvds0";
- };
- mstp8_clks: mstp8_clks@e6150990 {
- compatible = "renesas,r8a7793-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
- <&p_clk>, <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2
- R8A7793_CLK_VIN1 R8A7793_CLK_VIN0
- R8A7793_CLK_ETHER R8A7793_CLK_SATA1
- R8A7793_CLK_SATA0
- >;
- clock-output-names =
- "ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
- "sata1", "sata0";
- };
- mstp9_clks: mstp9_clks@e6150994 {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&p_clk>, <&p_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
- <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
- R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
- R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
- R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1
- R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5
- R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
- R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
- R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
- >;
- clock-output-names =
- "gpio7", "gpio6", "gpio5", "gpio4",
- "gpio3", "gpio2", "gpio1", "gpio0",
- "rcan1", "rcan0", "qspi_mod", "i2c5",
- "i2c6", "i2c4", "i2c3", "i2c2", "i2c1",
- "i2c0";
- };
- mstp10_clks: mstp10_clks@e6150998 {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
- clocks = <&p_clk>,
- <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&p_clk>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
- <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>;
-
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_SSI_ALL
- R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5
- R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0
- R8A7793_CLK_SCU_ALL
- R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0
- R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0
- R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5
- R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0
- >;
- clock-output-names =
- "ssi-all",
- "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
- "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
- "scu-all",
- "scu-dvc1", "scu-dvc0",
- "scu-ctu1-mix1", "scu-ctu0-mix0",
- "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
- "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
- };
- mstp11_clks: mstp11_clks@e615099c {
- compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5
- >;
- clock-output-names = "scifa3", "scifa4", "scifa5";
- };
+ /* Special CPG clocks */
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7793-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
@@ -1428,19 +1181,20 @@
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
- clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
- <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
- <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>,
- <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>,
- <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>,
- <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>,
- <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7793_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
@@ -1449,6 +1203,13 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index f1eea13cdf44..bd98790d964e 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -167,8 +167,7 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU1>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
@@ -305,7 +304,7 @@
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
@@ -319,7 +318,7 @@
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
sd-uhs-sdr50;
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 4cb5278d104d..edfad0e5ac53 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -423,8 +423,7 @@
pinctrl-names = "default";
status = "okay";
- clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU1>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x2_clk>, <&x3_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 26535414203a..905e50c9b524 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -9,7 +9,7 @@
* kind, whether express or implied.
*/
-#include <dt-bindings/clock/r8a7794-clock.h>
+#include <dt-bindings/clock/r8a7794-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/r8a7794-sysc.h>
@@ -43,7 +43,7 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
- clocks = <&z2_clk>;
+ clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -53,6 +53,7 @@
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
@@ -75,13 +76,14 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&mstp4_clks R8A7794_CLK_INTC_SYS>;
+ clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -89,12 +91,13 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+ clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -102,12 +105,13 @@
gpio-ranges = <&pfc 0 32 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+ clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -115,12 +119,13 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+ clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -128,12 +133,13 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+ clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -141,12 +147,13 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+ clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -154,12 +161,13 @@
gpio-ranges = <&pfc 0 160 28>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+ clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
- compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -167,8 +175,9 @@
gpio-ranges = <&pfc 0 192 26>;
#interrupt-cells = <2>;
interrupt-controller;
- clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+ clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
cmt0: timer@ffca0000 {
@@ -176,9 +185,10 @@
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
+ clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
@@ -196,9 +206,10 @@
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
+ clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
@@ -228,8 +239,9 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
+ clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
pfc: pin-controller@e6060000 {
@@ -261,9 +273,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
+ clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -292,9 +305,10 @@
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
+ clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -320,9 +334,10 @@
"ch0", "ch1", "ch2", "ch3", "ch4", "ch5",
"ch6", "ch7", "ch8", "ch9", "ch10", "ch11",
"ch12";
- clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
+ clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -332,12 +347,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
+ clocks = <&cpg CPG_MOD 204>;
clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>,
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -346,12 +362,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
+ clocks = <&cpg CPG_MOD 203>;
clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>,
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -360,12 +377,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
+ clocks = <&cpg CPG_MOD 202>;
clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>,
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -374,12 +392,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
+ clocks = <&cpg CPG_MOD 1106>;
clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -388,12 +407,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
+ clocks = <&cpg CPG_MOD 1107>;
clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -402,12 +422,13 @@
"renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
+ clocks = <&cpg CPG_MOD 1108>;
clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>,
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -416,12 +437,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
+ clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -430,12 +452,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
+ clocks = <&cpg CPG_MOD 207>;
clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -444,12 +467,13 @@
"renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
+ clocks = <&cpg CPG_MOD 216>;
clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -458,13 +482,14 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -473,13 +498,14 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -488,13 +514,14 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -503,13 +530,14 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -518,13 +546,14 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -533,13 +562,14 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -548,13 +578,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -563,13 +594,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -578,13 +610,14 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
+ clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -610,8 +643,9 @@
compatible = "renesas,ether-r8a7794";
reg = <0 0xee700000 0 0x400>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+ clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -623,8 +657,9 @@
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
+ clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -635,8 +670,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -647,8 +683,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -659,8 +696,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -671,8 +709,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -683,8 +722,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -695,8 +735,9 @@
compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-internal-delay-ns = <6>;
@@ -708,11 +749,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
+ clocks = <&cpg CPG_MOD 318>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>,
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -723,11 +765,12 @@
"renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
+ clocks = <&cpg CPG_MOD 323>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>,
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -737,11 +780,12 @@
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+ clocks = <&cpg CPG_MOD 315>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
};
@@ -750,12 +794,13 @@
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ clocks = <&cpg CPG_MOD 314>;
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
<&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -763,12 +808,13 @@
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ clocks = <&cpg CPG_MOD 312>;
dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
<&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -776,12 +822,13 @@
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ clocks = <&cpg CPG_MOD 311>;
dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
<&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -789,11 +836,12 @@
compatible = "renesas,qspi-r8a7794", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+ clocks = <&cpg CPG_MOD 917>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -804,8 +852,9 @@
compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+ clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -813,8 +862,9 @@
compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+ clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -824,8 +874,9 @@
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <0 0>;
@@ -857,8 +908,9 @@
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <1 1>;
@@ -888,8 +940,9 @@
compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -902,9 +955,10 @@
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
usb0: usb-channel@0 {
@@ -917,20 +971,22 @@
};
};
- vsp1@fe928000 {
+ vsp@fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>;
+ clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
};
- vsp1@fe930000 {
+ vsp@fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>;
+ clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
};
du: display@feb00000 {
@@ -939,8 +995,7 @@
reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU1>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
status = "disabled";
@@ -965,10 +1020,11 @@
compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
- <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -976,434 +1032,73 @@
compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
- <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+ <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /*
- * The external audio clocks are configured as 0 Hz fixed
- * frequency clocks by default. Boards that provide audio
- * clocks should override them.
- */
- audio_clka: audio_clka {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkb: audio_clkb {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkc: audio_clkc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7794-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk &usb_extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "rcan";
- #power-domain-cells = <0>;
- };
- /* Variable factor clocks */
- sd2_clk: sd2@e6150078 {
- compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150078 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- sd3_clk: sd3@e615026c {
- compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615026c 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
- mmc0_clk: mmc0@e6150240 {
- compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150240 0 4>;
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- };
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- /* Fixed factor clocks */
- pll1_div2_clk: pll1_div2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- z2_clk: z2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL0>;
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- };
- zg_clk: zg {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- zx_clk: zx {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <3>;
- clock-mult = <1>;
- };
- zs_clk: zs {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <6>;
- clock-mult = <1>;
- };
- hp_clk: hp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- i_clk: i {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- b_clk: b {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <12>;
- clock-mult = <1>;
- };
- p_clk: p {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <24>;
- clock-mult = <1>;
- };
- cl_clk: cl {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <48>;
- clock-mult = <1>;
- };
- m2_clk: m2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- rclk_clk: rclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(48 * 1024)>;
- clock-mult = <1>;
- };
- oscclk_clk: oscclk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <(12 * 1024)>;
- clock-mult = <1>;
- };
- zb3_clk: zb3 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- zb3d2_clk: zb3d2 {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- ddr_clk: ddr {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- };
- mp_clk: mp {
- compatible = "fixed-factor-clock";
- clocks = <&pll1_div2_clk>;
- #clock-cells = <0>;
- clock-div = <15>;
- clock-mult = <1>;
- };
- cp_clk: cp {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <48>;
- clock-mult = <1>;
- };
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
- acp_clk: acp {
- compatible = "fixed-factor-clock";
- clocks = <&extal_clk>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
+ /*
+ * The external audio clocks are configured as 0 Hz fixed
+ * frequency clocks by default. Boards that provide audio
+ * clocks should override them.
+ */
+ audio_clka: audio_clka {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkb: audio_clkb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkc: audio_clkc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- /* Gate clocks */
- mstp0_clks: mstp0_clks@e6150130 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
- clocks = <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7794_CLK_MSIOF0>;
- clock-output-names = "msiof0";
- };
- mstp1_clks: mstp1_clks@e6150134 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
- <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1
- R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0
- R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0
- R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S
- >;
- clock-output-names =
- "vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0",
- "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps";
- };
- mstp2_clks: mstp2_clks@e6150138 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&zs_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0
- R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1
- R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2
- R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0
- >;
- clock-output-names =
- "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "scifb2",
- "sys-dmac1", "sys-dmac0";
- };
- mstp3_clks: mstp3_clks@e615013c {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
- <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
- R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0
- R8A7794_CLK_IIC1 R8A7794_CLK_CMT1
- R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
- >;
- clock-output-names =
- "sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "i2c6", "i2c7",
- "cmt1", "usbdmac0", "usbdmac1";
- };
- mstp4_clks: mstp4_clks@e6150140 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>, <&zs_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7794_CLK_IRQC R8A7794_CLK_INTC_SYS>;
- clock-output-names = "irqc", "intc-sys";
- };
- mstp5_clks: mstp5_clks@e6150144 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&hp_clk>, <&p_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7794_CLK_AUDIO_DMAC0
- R8A7794_CLK_PWM>;
- clock-output-names = "audmac0", "pwm";
- };
- mstp7_clks: mstp7_clks@e615014c {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&hp_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&zx_clk>, <&zx_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
- R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
- R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
- R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
- R8A7794_CLK_SCIF0
- R8A7794_CLK_DU1 R8A7794_CLK_DU0
- >;
- clock-output-names =
- "ehci", "hsusb",
- "hscif2", "scif5", "scif4", "hscif1", "hscif0",
- "scif3", "scif2", "scif1", "scif0",
- "du1", "du0";
- };
- mstp8_clks: mstp8_clks@e6150990 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_VIN1 R8A7794_CLK_VIN0
- R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER
- >;
- clock-output-names =
- "vin1", "vin0", "etheravb", "ether";
- };
- mstp9_clks: mstp9_clks@e6150994 {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>,
- <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>;
- #clock-cells = <1>;
- clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
- R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
- R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
- R8A7794_CLK_GPIO0 R8A7794_CLK_RCAN1
- R8A7794_CLK_RCAN0 R8A7794_CLK_QSPI_MOD
- R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
- R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
- R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
- clock-output-names =
- "gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
- "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
- "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
- };
- mstp10_clks: mstp10_clks@e6150998 {
- compatible = "renesas,r8a7794-mstp-clocks",
- "renesas,cpg-mstp-clocks";
- reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
- clocks = <&p_clk>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&p_clk>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>,
- <&mstp10_clks R8A7794_CLK_SCU_ALL>;
- #clock-cells = <1>;
- clock-indices = <R8A7794_CLK_SSI_ALL
- R8A7794_CLK_SSI9 R8A7794_CLK_SSI8
- R8A7794_CLK_SSI7 R8A7794_CLK_SSI6
- R8A7794_CLK_SSI5 R8A7794_CLK_SSI4
- R8A7794_CLK_SSI3 R8A7794_CLK_SSI2
- R8A7794_CLK_SSI1 R8A7794_CLK_SSI0
- R8A7794_CLK_SCU_ALL
- R8A7794_CLK_SCU_DVC1
- R8A7794_CLK_SCU_DVC0
- R8A7794_CLK_SCU_CTU1_MIX1
- R8A7794_CLK_SCU_CTU0_MIX0
- R8A7794_CLK_SCU_SRC6
- R8A7794_CLK_SCU_SRC5
- R8A7794_CLK_SCU_SRC4
- R8A7794_CLK_SCU_SRC3
- R8A7794_CLK_SCU_SRC2
- R8A7794_CLK_SCU_SRC1>;
- clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7",
- "ssi6", "ssi5", "ssi4", "ssi3",
- "ssi2", "ssi1", "ssi0",
- "scu-all", "scu-dvc1", "scu-dvc0",
- "scu-ctu1-mix1", "scu-ctu0-mix0",
- "scu-src6", "scu-src5", "scu-src4",
- "scu-src3", "scu-src2", "scu-src1";
- };
- mstp11_clks: mstp11_clks@e615099c {
- compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
- reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
- clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
- #clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
- >;
- clock-output-names = "scifa3", "scifa4", "scifa5";
- };
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7794-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
@@ -1490,31 +1185,20 @@
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri */
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
- clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
- <&mstp10_clks R8A7794_CLK_SSI9>,
- <&mstp10_clks R8A7794_CLK_SSI8>,
- <&mstp10_clks R8A7794_CLK_SSI7>,
- <&mstp10_clks R8A7794_CLK_SSI6>,
- <&mstp10_clks R8A7794_CLK_SSI5>,
- <&mstp10_clks R8A7794_CLK_SSI4>,
- <&mstp10_clks R8A7794_CLK_SSI3>,
- <&mstp10_clks R8A7794_CLK_SSI2>,
- <&mstp10_clks R8A7794_CLK_SSI1>,
- <&mstp10_clks R8A7794_CLK_SSI0>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
- <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
- <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
- <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
- <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
- <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+ <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clka>, <&audio_clkb>, <&audio_clkc>,
- <&m2_clk>;
+ <&cpg CPG_CORE R8A7794_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
@@ -1525,6 +1209,13 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fdb1570bc7d3..e2a0f576946f 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -135,6 +135,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 4916c65e0ace..3b704cfed69a 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -152,6 +152,25 @@
};
};
+ gpu: gpu@10090000 {
+ compatible = "rockchip,rk3036-mali", "arm,mali-400";
+ reg = <0x10090000 0x10000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0";
+ assigned-clocks = <&cru SCLK_GPU>;
+ assigned-clock-rates = <100000000>;
+ clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
+ clock-names = "core", "bus";
+ resets = <&cru SRST_GPU>;
+ status = "disabled";
+ };
+
vop: vop@10118000 {
compatible = "rockchip,rk3036-vop";
reg = <0x10118000 0x19c>;
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 400cbf9609e3..cdf301f5778b 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -196,7 +196,7 @@
clock-frequency = <400000>;
status = "okay";
- ak8963: ak8963@0d {
+ ak8963: ak8963@d {
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio4>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index f50481fd8e5c..06523caca27d 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -610,6 +610,30 @@
};
};
+&gpu {
+ compatible = "rockchip,rk3066-mali", "arm,mali-400";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 53d6fc2fdbce..00e05a6662ac 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -176,6 +176,10 @@
cpu0-supply = <&vdd_arm>;
};
+&gpu {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1399bc04ea77..aa10caae51c3 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -553,6 +553,30 @@
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
+&gpu {
+ compatible = "rockchip,rk3188-mali", "arm,mali-400";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+};
+
&i2c0 {
compatible = "rockchip,rk3188-i2c";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 06814421eed2..780ec3a99b21 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -558,6 +558,27 @@
status = "disabled";
};
+ gpu: gpu@20000000 {
+ compatible = "rockchip,rk3228-mali", "arm,mali-400";
+ reg = <0x20000000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1";
+ clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+ clock-names = "core", "bus";
+ resets = <&cru SRST_GPU_A>;
+ status = "disabled";
+ };
+
vpu_mmu: iommu@20020800 {
compatible = "rockchip,iommu";
reg = <0x20020800 0x100>;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 5f05815f47e0..5f1e336dbaac 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -184,6 +184,7 @@
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-always-on;
};
vcca_18: REG7 {
@@ -223,6 +224,7 @@
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 7da0947ababb..eab176e3dfc3 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -226,6 +226,13 @@
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec_c0>;
+ status = "okay";
+};
+
&i2c0 {
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
@@ -255,6 +262,10 @@
};
};
+&i2c5 {
+ status = "okay";
+};
+
&i2s {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f084e0c8dcb3..c06d0f4ceb81 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -384,7 +384,7 @@
status = "okay";
clock-frequency = <400000>;
- ak8963: ak8963@0d {
+ ak8963: ak8963@d {
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio8>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
new file mode 100644
index 000000000000..9842a006e823
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -0,0 +1,498 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+
+/ {
+ model = "Amarula Vyasa-RK3288";
+ compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ dc12_vbat: dc12-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "dc12_vbat";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vboot_3v3: vboot-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vboot_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ vboot_5v: vboot-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vboot_sv";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ v3g_3v3: v3g-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3g_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ vsus_5v: vsus-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vsus_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vusb1_5v: vusb1-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vusb1_5v";
+ enable-active-high;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsus_5v>;
+ };
+
+ vusb2_5v: vusb2-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vusb2_5v";
+ enable-active-high;
+ gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pwr_en>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsus_5v>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_tp: LDO_REG1 {
+ regulator-name = "vcc_tp";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_codec: LDO_REG2 {
+ regulator-name = "vcc_codec";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_gps: LDO_REG4 {
+ regulator-name = "vcc_gps";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc10_lcd: LDO_REG6 {
+ regulator-name = "vcc10_lcd";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-name = "vcc18_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: SWITCH_REG1 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_lan: SWITCH_REG2 {
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcc_18>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc_io>;
+ flash0-suuply = <&vcc_18>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830 = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc_18>;
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy_pwr_en>;
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ gmac {
+ phy_int: phy-int {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_pmeb: phy-pmeb {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rst: phy-rst {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb_host {
+ phy_pwr_en: phy-pwr-en {
+ rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+
+ usb2_pwr_en: usb2-pwr-en {
+ rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 356ed1e62452..cd24894ee5c6 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -972,6 +972,17 @@
status = "disabled";
};
+ rga: rga@ff920000 {
+ compatible = "rockchip,rk3288-rga";
+ reg = <0x0 0xff920000 0x0 0x180>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+ clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+ reset-names = "core", "axi", "ahb";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff930000 0x0 0x19c>;
@@ -1002,6 +1013,11 @@
reg = <2>;
remote-endpoint = <&mipi_in_vopb>;
};
+
+ vopb_out_lvds: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&lvds_in_vopb>;
+ };
};
};
@@ -1045,6 +1061,11 @@
reg = <2>;
remote-endpoint = <&mipi_in_vopl>;
};
+
+ vopl_out_lvds: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&lvds_in_vopl>;
+ };
};
};
@@ -1086,6 +1107,39 @@
};
};
+ lvds: lvds@ff96c000 {
+ compatible = "rockchip,rk3288-lvds";
+ reg = <0x0 0xff96c000 0x0 0x4000>;
+ clocks = <&cru PCLK_LVDS_PHY>;
+ clock-names = "pclk_lvds";
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ power-domains = <&power RK3288_PD_VIO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in: port@0 {
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+ lvds_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+ };
+ };
+
edp: dp@ff970000 {
compatible = "rockchip,rk3288-dp";
reg = <0x0 0xff970000 0x0 0x4000>;
@@ -1124,8 +1178,8 @@
reg-io-width = <4>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
- clock-names = "iahb", "isfr";
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+ clock-names = "iahb", "isfr", "cec";
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
@@ -1427,6 +1481,14 @@
};
hdmi {
+ hdmi_cec_c0: hdmi-cec-c0 {
+ rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ hdmi_cec_c7: hdmi-cec-c7 {
+ rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>;
+ };
+
hdmi_ddc: hdmi-ddc {
rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
<7 20 RK_FUNC_2 &pcfg_pull_none>;
@@ -1527,6 +1589,15 @@
};
};
+ lcdc {
+ lcdc_ctl: lcdc-ctl {
+ rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>,
+ <1 25 RK_FUNC_1 &pcfg_pull_none>,
+ <1 26 RK_FUNC_1 &pcfg_pull_none>,
+ <1 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 4aa6f60d6a22..49584b6a4195 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -117,6 +117,17 @@
clock-output-names = "xin24m";
};
+ gpu: gpu@10090000 {
+ compatible = "arm,mali-400";
+ reg = <0x10090000 0x10000>;
+ clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+ clock-names = "core", "bus";
+ assigned-clocks = <&cru ACLK_GPU>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_GPU>;
+ status = "disabled";
+ };
+
L2: l2-cache-controller@10138000 {
compatible = "arm,pl310-cache";
reg = <0x10138000 0x1000>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 86a57f823616..70f0106d1252 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -222,6 +222,10 @@
status = "okay";
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy {
status = "okay";
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index e7cd1315db1b..76ea24636feb 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rv1108-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -70,6 +71,8 @@
compatible = "arm,cortex-a7";
reg = <0xf00>;
clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <75>;
operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -329,6 +332,60 @@
status = "disabled";
};
+ thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <50>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ target: trip-point1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ soc_crit: soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@10370000 {
+ compatible = "rockchip,rv1108-tsadc";
+ reg = <0x10370000 0x100>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <750000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,hw-tshut-temp = <120000>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
adc: adc@1038c000 {
compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
reg = <0x1038c000 0x100>;
@@ -740,6 +797,16 @@
};
};
+ tsadc {
+ otp_out: otp-out {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index b1a26b42d190..b44e63995583 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -124,7 +124,7 @@
};
};
- ns_sram: sram@00200000 {
+ ns_sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x20000>;
};
@@ -135,13 +135,13 @@
#size-cells = <1>;
ranges;
- nfc_sram: sram@00100000 {
+ nfc_sram: sram@100000 {
compatible = "mmio-sram";
no-memory-wc;
reg = <0x00100000 0x2400>;
};
- usb0: gadget@00300000 {
+ usb0: gadget@300000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,sama5d3-udc";
@@ -271,7 +271,7 @@
};
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -280,7 +280,7 @@
status = "disabled";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -289,7 +289,7 @@
status = "disabled";
};
- L2: cache-controller@00a00000 {
+ L2: cache-controller@a00000 {
compatible = "arm,pl310-cache";
reg = <0x00a00000 0x1000>;
interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 554d0bdedc7a..1889b4dea066 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -79,7 +79,7 @@
};
};
- sram: sram@00300000 {
+ sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x20000>;
};
@@ -1408,7 +1408,7 @@
reg = <0x200000 0x2400>;
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,sama5d3-udc";
@@ -1525,7 +1525,7 @@
};
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1534,7 +1534,7 @@
status = "disabled";
};
- usb2: ehci@00700000 {
+ usb2: ehci@700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 6d252ad050f6..7f55050dd405 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -166,14 +166,14 @@
};
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
&pioD 26 GPIO_ACTIVE_LOW
@@ -182,7 +182,7 @@
status = "okay";
};
- usb2: ehci@00700000 {
+ usb2: ehci@700000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index 252e0d35f846..83e3d3e08fd4 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -253,7 +253,7 @@
};
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 2fa36c525957..b069644ed238 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -113,7 +113,7 @@
};
};
- ns_sram: sram@00210000 {
+ ns_sram: sram@210000 {
compatible = "mmio-sram";
reg = <0x00210000 0x10000>;
};
@@ -130,7 +130,7 @@
reg = <0x100000 0x2400>;
};
- usb0: gadget@00400000 {
+ usb0: gadget@400000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,sama5d3-udc";
@@ -260,7 +260,7 @@
};
};
- usb1: ohci@00500000 {
+ usb1: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -269,7 +269,7 @@
status = "disabled";
};
- usb2: ehci@00600000 {
+ usb2: ehci@600000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -278,7 +278,7 @@
status = "disabled";
};
- L2: cache-controller@00a00000 {
+ L2: cache-controller@a00000 {
compatible = "arm,pl310-cache";
reg = <0x00a00000 0x1000>;
interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 4ea5c5a16c57..88d7e5631d34 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -27,6 +27,7 @@
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <1196000000>;
+ clocks = <&cpg_clocks SH73A0_CLK_Z>;
power-domains = <&pd_a2sl>;
next-level-cache = <&L2>;
};
@@ -35,6 +36,7 @@
compatible = "arm,cortex-a9";
reg = <1>;
clock-frequency = <1196000000>;
+ clocks = <&cpg_clocks SH73A0_CLK_Z>;
power-domains = <&pd_a2sl>;
next-level-cache = <&L2>;
};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 6f720756057d..35e944d8b5c4 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -92,7 +92,7 @@
interrupts = <18 IRQ_TYPE_EDGE_RISING>,
<19 IRQ_TYPE_EDGE_RISING>;
};
- ak8974@0f {
+ ak8974@f {
/* Magnetometer */
compatible = "asahi-kasei,ak8974";
reg = <0x0f>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 3c9f2f068c2f..0e7d77d719d7 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -143,7 +143,7 @@
interrupts = <18 IRQ_TYPE_EDGE_RISING>,
<19 IRQ_TYPE_EDGE_RISING>;
};
- ak8974@0f {
+ ak8974@f {
/* Magnetometer */
compatible = "asahi-kasei,ak8974";
reg = <0x0f>;
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 34c119a66f14..d0a24d9e517a 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -90,7 +90,7 @@
clock-output-names = "clk-s-icn-reg-0";
};
- clockgen-a@090ff000 {
+ clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -131,7 +131,7 @@
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
- clk_s_c0: clockgen-c@09103000 {
+ clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -220,7 +220,7 @@
"clk-s-d0-fs0-ch3";
};
- clockgen-d0@09104000 {
+ clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 12c0757594d7..cf3756976c39 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -72,19 +72,19 @@
};
};
- intc: interrupt-controller@08761000 {
+ intc: interrupt-controller@8761000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
};
- scu@08760000 {
+ scu@8760000 {
compatible = "arm,cortex-a9-scu";
reg = <0x08760000 0x1000>;
};
- timer@08760200 {
+ timer@8760200 {
interrupt-parent = <&intc>;
compatible = "arm,cortex-a9-global-timer";
reg = <0x08760200 0x100>;
@@ -555,7 +555,7 @@
status = "disabled";
};
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
@@ -570,7 +570,7 @@
bus-width = <8>;
};
- mmc1: sdhci@09080000 {
+ mmc1: sdhci@9080000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09080000 0x7ff>;
@@ -715,14 +715,14 @@
status = "disabled";
};
- rng10: rng@08a89000 {
+ rng10: rng@8a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
- rng11: rng@08a8a000 {
+ rng11: rng@8a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
@@ -756,14 +756,14 @@
<&clk_s_c0_flexgen CLK_ETH_PHY>;
};
- rng10: rng@08a89000 {
+ rng10: rng@8a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
- rng11: rng@08a8a000 {
+ rng11: rng@8a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index bd1a82e8fffe..a29090077fdf 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -56,7 +56,7 @@
interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
- pio0: gpio@09610000 {
+ pio0: gpio@9610000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -64,7 +64,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO0";
};
- pio1: gpio@09611000 {
+ pio1: gpio@9611000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -72,7 +72,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- pio2: gpio@09612000 {
+ pio2: gpio@9612000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -80,7 +80,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- pio3: gpio@09613000 {
+ pio3: gpio@9613000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -88,7 +88,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- pio4: gpio@09614000 {
+ pio4: gpio@9614000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -97,7 +97,7 @@
st,bank-name = "PIO4";
};
- pio5: gpio@09615000 {
+ pio5: gpio@9615000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -380,7 +380,7 @@
interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
- pio10: pio@09200000 {
+ pio10: pio@9200000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -388,7 +388,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO10";
};
- pio11: pio@09201000 {
+ pio11: pio@9201000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -396,7 +396,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO11";
};
- pio12: pio@09202000 {
+ pio12: pio@9202000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -404,7 +404,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO12";
};
- pio13: pio@09203000 {
+ pio13: pio@9203000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -412,7 +412,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO13";
};
- pio14: pio@09204000 {
+ pio14: pio@9204000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -420,7 +420,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO14";
};
- pio15: pio@09205000 {
+ pio15: pio@9205000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -428,7 +428,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO15";
};
- pio16: pio@09206000 {
+ pio16: pio@9206000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -436,7 +436,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO16";
};
- pio17: pio@09207000 {
+ pio17: pio@9207000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -444,7 +444,7 @@
reg = <0x7000 0x100>;
st,bank-name = "PIO17";
};
- pio18: pio@09208000 {
+ pio18: pio@9208000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -452,7 +452,7 @@
reg = <0x8000 0x100>;
st,bank-name = "PIO18";
};
- pio19: pio@09209000 {
+ pio19: pio@9209000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -940,7 +940,7 @@
interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
- pio20: pio@09210000 {
+ pio20: pio@9210000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -973,7 +973,7 @@
interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
- pio30: gpio@09220000 {
+ pio30: gpio@9220000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -981,7 +981,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO30";
};
- pio31: gpio@09221000 {
+ pio31: gpio@9221000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -989,7 +989,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO31";
};
- pio32: gpio@09222000 {
+ pio32: gpio@9222000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -997,7 +997,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO32";
};
- pio33: gpio@09223000 {
+ pio33: gpio@9223000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1005,7 +1005,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO33";
};
- pio34: gpio@09224000 {
+ pio34: gpio@9224000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1013,7 +1013,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO34";
};
- pio35: gpio@09225000 {
+ pio35: gpio@9225000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1168,7 +1168,7 @@
interrupt-names = "irqmux";
ranges = <0 0x09230000 0x3000>;
- pio40: gpio@09230000 {
+ pio40: gpio@9230000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1176,7 +1176,7 @@
reg = <0 0x100>;
st,bank-name = "PIO40";
};
- pio41: gpio@09231000 {
+ pio41: gpio@9231000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1184,7 +1184,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO41";
};
- pio42: gpio@09232000 {
+ pio42: gpio@9232000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 83313b51915d..9830be577433 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -30,7 +30,7 @@
soc {
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
max-frequency = <200000000>;
sd-uhs-sdr50;
sd-uhs-sdr104;
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 93c14d183e29..c663b70c43a7 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -109,14 +109,14 @@
status = "okay";
};
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
pinctrl-0 = <&pinctrl_sd0>;
bus-width = <4>;
status = "okay";
};
/* high speed expansion connector */
- mmc1: sdhci@09080000 {
+ mmc1: sdhci@9080000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 07c8ef9d77f6..fde5df17f575 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -92,7 +92,7 @@
clock-output-names = "clk-s-icn-reg-0";
};
- clockgen-a@090ff000 {
+ clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -134,7 +134,7 @@
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
- clk_s_c0: clockgen-c@09103000 {
+ clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -230,7 +230,7 @@
"clk-s-d0-fs0-ch3";
};
- clockgen-d0@09104000 {
+ clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 21fe72b183d8..cffa50db5d72 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -282,7 +282,7 @@
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
};
- sti-cec@094a087c {
+ sti-cec@94a087c {
compatible = "st,stih-cec";
reg = <0x94a087c 0x64>;
clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 438e54c585b1..4e6d915c85ff 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -75,11 +75,11 @@
st,i2c-min-sda-pulse-width-us = <5>;
};
- mmc1: sdhci@09080000 {
+ mmc1: sdhci@9080000 {
status = "okay";
};
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
status = "okay";
max-frequency = <200000000>;
sd-uhs-sdr50;
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index ee6614b79f7d..9a157c1a99b1 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -92,7 +92,7 @@
clock-output-names = "clk-s-icn-reg-0";
};
- clockgen-a@090ff000 {
+ clockgen-a@90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -131,7 +131,7 @@
"clk-s-c0-fs0-ch3";
};
- clk_s_c0: clockgen-c@09103000 {
+ clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -223,7 +223,7 @@
"clk-s-d0-fs0-ch3";
};
- clockgen-d0@09104000 {
+ clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 965f88160718..e6525ab4d9bb 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -100,7 +100,7 @@
phy-names = "usb";
};
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
assigned-clock-parents = <&clk_s_c0_pll1 0>;
assigned-clock-rates = <200000000>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4b8f62f89664..7f80c2c414c8 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -62,12 +62,12 @@
status = "okay";
};
- mmc0: sdhci@09060000 {
+ mmc0: sdhci@9060000 {
non-removable;
status = "okay";
};
- mmc1: sdhci@09080000 {
+ mmc1: sdhci@9080000 {
status = "okay";
};
@@ -102,7 +102,7 @@
fixed-link = <0 1 1000 0 0>;
};
- demux@08a20000 {
+ demux@8a20000 {
compatible = "st,stih407-c8sectpfe";
status = "okay";
reg = <0x08a20000 0x10000>,
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 69a957963fa8..2d4e71717694 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -83,6 +83,13 @@
gpios = <&gpioc 13 0>;
};
};
+
+ usbotg_hs_phy: usb-phy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+ clock-names = "main_clk";
+ };
};
&clk_hse {
@@ -93,6 +100,14 @@
status = "okay";
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins_b>;
+ pinctrl-names = "default";
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
};
@@ -102,3 +117,12 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 7f3560c0211d..ae94d86c53c4 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -40,7 +40,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
@@ -165,35 +165,35 @@
usart1_pins_a: usart1@0 {
pins1 {
- pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
- pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+ pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+ pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
- pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
- <STM32F429_PA11_FUNC_OTG_FS_DM>,
- <STM32F429_PA12_FUNC_OTG_FS_DP>;
+ pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+ <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
bias-disable;
drive-push-pull;
slew-rate = <2>;
@@ -202,9 +202,9 @@
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
- pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
- <STM32F429_PB14_FUNC_OTG_HS_DM>,
- <STM32F429_PB15_FUNC_OTG_HS_DP>;
+ pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
+ <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
+ <STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
bias-disable;
drive-push-pull;
slew-rate = <2>;
@@ -213,18 +213,18 @@
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
- pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
- <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
- <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
- <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
- <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
- <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
- <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
- <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
- <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
- <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
- <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
- <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
+ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+ <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+ <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+ <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+ <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+ <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+ <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+ <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+ <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+ <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+ <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
bias-disable;
drive-push-pull;
slew-rate = <2>;
@@ -233,49 +233,49 @@
ethernet_mii: mii@0 {
pins {
- pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
- <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
- <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
- <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
- <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
- <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
- <STM32F429_PA2_FUNC_ETH_MDIO>,
- <STM32F429_PC1_FUNC_ETH_MDC>,
- <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
- <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
- <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
- <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
- <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
- <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
+ <STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
+ <STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
+ <STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
+ <STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
+ <STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
- pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+ pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
};
};
pwm1_pins: pwm@1 {
pins {
- pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
- <STM32F429_PB13_FUNC_TIM1_CH1N>,
- <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
+ <STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
};
};
pwm3_pins: pwm@3 {
pins {
- pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
- <STM32F429_PB5_FUNC_TIM3_CH2>;
+ pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
+ <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
};
};
i2c1_pins: i2c1@0 {
pins {
- pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
- <STM32F429_PB6_FUNC_I2C1_SCL>;
+ pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
+ <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
bias-disable;
drive-open-drain;
slew-rate = <3>;
@@ -284,55 +284,55 @@
ltdc_pins: ltdc@0 {
pins {
- pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
- <STM32F429_PI13_FUNC_LCD_VSYNC>,
- <STM32F429_PI14_FUNC_LCD_CLK>,
- <STM32F429_PI15_FUNC_LCD_R0>,
- <STM32F429_PJ0_FUNC_LCD_R1>,
- <STM32F429_PJ1_FUNC_LCD_R2>,
- <STM32F429_PJ2_FUNC_LCD_R3>,
- <STM32F429_PJ3_FUNC_LCD_R4>,
- <STM32F429_PJ4_FUNC_LCD_R5>,
- <STM32F429_PJ5_FUNC_LCD_R6>,
- <STM32F429_PJ6_FUNC_LCD_R7>,
- <STM32F429_PJ7_FUNC_LCD_G0>,
- <STM32F429_PJ8_FUNC_LCD_G1>,
- <STM32F429_PJ9_FUNC_LCD_G2>,
- <STM32F429_PJ10_FUNC_LCD_G3>,
- <STM32F429_PJ11_FUNC_LCD_G4>,
- <STM32F429_PJ12_FUNC_LCD_B0>,
- <STM32F429_PJ13_FUNC_LCD_B1>,
- <STM32F429_PJ14_FUNC_LCD_B2>,
- <STM32F429_PJ15_FUNC_LCD_B3>,
- <STM32F429_PK0_FUNC_LCD_G5>,
- <STM32F429_PK1_FUNC_LCD_G6>,
- <STM32F429_PK2_FUNC_LCD_G7>,
- <STM32F429_PK3_FUNC_LCD_B4>,
- <STM32F429_PK4_FUNC_LCD_B5>,
- <STM32F429_PK5_FUNC_LCD_B6>,
- <STM32F429_PK6_FUNC_LCD_B7>,
- <STM32F429_PK7_FUNC_LCD_DE>;
+ pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+ <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
- pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
- <STM32F429_PB7_FUNC_DCMI_VSYNC>,
- <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
- <STM32F429_PC6_FUNC_DCMI_D0>,
- <STM32F429_PC7_FUNC_DCMI_D1>,
- <STM32F429_PC8_FUNC_DCMI_D2>,
- <STM32F429_PC9_FUNC_DCMI_D3>,
- <STM32F429_PC11_FUNC_DCMI_D4>,
- <STM32F429_PD3_FUNC_DCMI_D5>,
- <STM32F429_PB8_FUNC_DCMI_D6>,
- <STM32F429_PE6_FUNC_DCMI_D7>,
- <STM32F429_PC10_FUNC_DCMI_D8>,
- <STM32F429_PC12_FUNC_DCMI_D9>,
- <STM32F429_PD6_FUNC_DCMI_D10>,
- <STM32F429_PD2_FUNC_DCMI_D11>;
+ pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
+ <STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
+ <STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
+ <STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
+ <STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
+ <STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
+ <STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
+ <STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
+ <STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
+ <STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
+ <STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
+ <STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
bias-disable;
drive-push-pull;
slew-rate = <3>;
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 18f656074437..4d85dba59e1d 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -61,6 +61,20 @@
serial0 = &usart1;
};
+ usbotg_hs_phy: usb-phy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+ clock-names = "main_clk";
+ };
+
+ /* This turns on vbus for otg fs for host mode (dwc2) */
+ vcc5v_otg_fs: vcc5v-otg-fs-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpiod 5 0>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
};
&clk_hse {
@@ -72,3 +86,19 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_fs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_b>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 5f9417894059..5f66d151eedb 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -42,7 +42,7 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -82,6 +82,27 @@
status = "disabled";
};
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
timer3: timer@40000400 {
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
@@ -90,6 +111,27 @@
status = "disabled";
};
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
timer4: timer@40000800 {
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
@@ -98,6 +140,27 @@
status = "disabled";
};
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
@@ -105,6 +168,27 @@
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
+ timers5: timers@40000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
@@ -113,6 +197,22 @@
status = "disabled";
};
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
timer7: timer@40001400 {
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
@@ -121,6 +221,73 @@
status = "disabled";
};
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
rtc: rtc@40002800 {
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
@@ -167,6 +334,18 @@
status = "disabled";
};
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
cec: cec@40006c00 {
compatible = "st,stm32-cec";
reg = <0x40006C00 0x400>;
@@ -192,6 +371,48 @@
status = "disabled";
};
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart1: serial@40011000 {
compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
@@ -221,6 +442,57 @@
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@8 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
pwrcfg: power-config@40007000 {
compatible = "syscon";
reg = <0x40007000 0x400>;
@@ -347,7 +619,7 @@
cec_pins_a: cec@0 {
pins {
- pinmux = <STM32F746_PA15_FUNC_HDMI_CEC>;
+ pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
slew-rate = <0>;
drive-open-drain;
bias-disable;
@@ -356,27 +628,88 @@
usart1_pins_a: usart1@0 {
pins1 {
- pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
bias-disable;
};
};
usart1_pins_b: usart1@1 {
pins1 {
- pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_b: i2c1@0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+ <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg-hs@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+ <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+ <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+ <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+ <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+ <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+ <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+ <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+ <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+ <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+ <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_hs_pins_b: usbotg-hs@1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+ <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+ <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+ <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+ <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+ <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+ <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+ <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+ <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+ <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+ <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+ <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_fs_pins_a: usbotg-fs@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+ <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
};
};
};
@@ -431,6 +764,24 @@
st,mem2mem;
status = "disabled";
};
+
+ usbotg_hs: usb@40040000 {
+ compatible = "st,stm32f7-hsotg";
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ usbotg_fs: usb@50000000 {
+ compatible = "st,stm32f4x9-fsotg";
+ reg = <0x50000000 0x40000>;
+ interrupts = <67>;
+ clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+ clock-names = "otg";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 76bbd6575fae..65c1cd043987 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -40,7 +40,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/pinctrl/stm32h7-pinfunc.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
/ {
soc {
@@ -55,7 +55,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOA_CK>;
st,bank-name = "GPIOA";
};
@@ -63,7 +63,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOB_CK>;
st,bank-name = "GPIOB";
};
@@ -71,7 +71,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOC_CK>;
st,bank-name = "GPIOC";
};
@@ -79,7 +79,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOD_CK>;
st,bank-name = "GPIOD";
};
@@ -87,7 +87,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOE_CK>;
st,bank-name = "GPIOE";
};
@@ -95,7 +95,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOF_CK>;
st,bank-name = "GPIOF";
};
@@ -103,7 +103,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOG_CK>;
st,bank-name = "GPIOG";
};
@@ -111,7 +111,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOH_CK>;
st,bank-name = "GPIOH";
};
@@ -119,7 +119,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOI_CK>;
st,bank-name = "GPIOI";
};
@@ -127,7 +127,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOJ_CK>;
st,bank-name = "GPIOJ";
};
@@ -135,32 +135,32 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc GPIOK_CK>;
st,bank-name = "GPIOK";
};
usart1_pins: usart1@0 {
pins1 {
- pinmux = <STM32H7_PB14_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32H7_PB15_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
bias-disable;
};
};
usart2_pins: usart2@0 {
pins1 {
- pinmux = <STM32H7_PD5_FUNC_USART2_TX>;
+ pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32H7_PD6_FUNC_USART2_RX>;
+ pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
bias-disable;
};
};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 26de31578701..bbfcbaca0b36 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -42,6 +42,8 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32h7-clks.h>
+#include <dt-bindings/mfd/stm32h7-rcc.h>
/ {
clocks {
@@ -51,10 +53,16 @@
clock-frequency = <0>;
};
- timer_clk: timer-clk {
+ clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <125000000>;
+ clock-frequency = <32768>;
+ };
+
+ clk_i2s: i2s_ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
};
};
@@ -63,7 +71,33 @@
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&timer_clk>;
+ clocks = <&rcc TIM5_CK>;
+ };
+
+ lptimer1: timer@40002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40002400 0x400>;
+ clocks = <&rcc LPTIM1_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
};
usart2: serial@40004400 {
@@ -71,13 +105,13 @@
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
- clocks = <&timer_clk>;
+ clocks = <&rcc USART2_CK>;
};
dac: dac@40007400 {
compatible = "st,stm32h7-dac-core";
reg = <0x40007400 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DAC12_CK>;
clock-names = "pclk";
#address-cells = <1>;
#size-cells = <0>;
@@ -103,8 +137,7 @@
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
- clocks = <&timer_clk>;
-
+ clocks = <&rcc USART1_CK>;
};
dma1: dma@40020000 {
@@ -118,9 +151,10 @@
<16>,
<17>,
<47>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DMA1_CK>;
#dma-cells = <4>;
st,mem2mem;
+ dma-requests = <8>;
status = "disabled";
};
@@ -135,17 +169,28 @@
<68>,
<69>,
<70>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DMA2_CK>;
#dma-cells = <4>;
st,mem2mem;
+ dma-requests = <8>;
status = "disabled";
};
+ dmamux1: dma-router@40020800 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x40020800 0x1c>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ clocks = <&rcc DMA1_CK>;
+ };
+
adc_12: adc@40022000 {
compatible = "st,stm32h7-adc-core";
reg = <0x40022000 0x400>;
interrupts = <18>;
- clocks = <&timer_clk>;
+ clocks = <&rcc ADC12_CK>;
clock-names = "bus";
interrupt-controller;
#interrupt-cells = <1>;
@@ -172,11 +217,121 @@
};
};
+ mdma1: dma@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&rcc MDMA_CK>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ };
+
+ lptimer2: timer@58002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002400 0x400>;
+ clocks = <&rcc LPTIM2_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@58002800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002800 0x400>;
+ clocks = <&rcc LPTIM3_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@58002c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002c00 0x400>;
+ clocks = <&rcc LPTIM4_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@58003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58003000 0x400>;
+ clocks = <&rcc LPTIM5_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: regulator@58003C00 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x58003C00 0x8>;
+ clocks = <&rcc VREF_CK>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ status = "disabled";
+ };
+
+ rcc: reset-clock-controller@58024400 {
+ compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+ reg = <0x58024400 0x400>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+ st,syscfg = <&pwrcfg>;
+ };
+
+ pwrcfg: power-config@58024800 {
+ compatible = "syscon";
+ reg = <0x58024800 0x400>;
+ };
+
adc_3: adc@58026000 {
compatible = "st,stm32h7-adc-core";
reg = <0x58026000 0x400>;
interrupts = <127>;
- clocks = <&timer_clk>;
+ clocks = <&rcc ADC3_CK>;
clock-names = "bus";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 6c07786e7ddb..9f0e72c67219 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -81,7 +81,7 @@
};
&clk_hse {
- clock-frequency = <125000000>;
+ clock-frequency = <25000000>;
};
&usart1 {
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index f80d37ddc4c6..09e909576c61 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_a1000>;
red {
label = "a1000:red:usr";
@@ -79,8 +77,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&emac_power_pin_a1000>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -129,8 +125,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -140,8 +134,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -156,7 +148,7 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -170,8 +162,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -187,18 +177,6 @@
status = "okay";
};
-&pio {
- emac_power_pin_a1000: emac_power_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-
- led_pins_a1000: led_pins@0 {
- pins = "PH10", "PH20";
- function = "gpio_out";
- };
-};
-
#include "axp209.dtsi"
&reg_dcdc2 {
@@ -236,13 +214,13 @@
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pins_a>;
+ pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 6b02de592a02..39ba4ccb9e2e 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -68,8 +68,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -79,8 +77,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -95,7 +91,7 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -108,8 +104,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -125,12 +119,6 @@
status = "okay";
};
-&pio {
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- pins = "PH12";
- };
-};
-
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@@ -147,7 +135,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index a7d61994b8fd..dfc88aee4fe3 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -65,8 +65,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -80,14 +78,10 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5306de4: touchscreen@38 {
@@ -104,21 +98,21 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
- button@800 {
+ button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <800000>;
};
- button@1000 {
+ button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
- button@1200 {
+ button-1200 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
@@ -127,8 +121,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -141,13 +133,13 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -164,7 +156,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 404ce7694899..1982c8c238c5 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -90,6 +101,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -99,8 +114,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -109,9 +122,17 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -121,14 +142,12 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -141,8 +160,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -163,13 +180,13 @@
};
&pio {
- led_pins_cubieboard: led_pins@0 {
+ led_pins_cubieboard: led-pins {
pins = "PH20", "PH21";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -221,14 +238,14 @@
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index e0777ae808c7..147cbc5e08ac 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en_pin_dsrv9703c>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@@ -77,10 +75,8 @@
max-microvolt = <3000000>;
};
- reg_motor: reg_motor {
+ reg_motor: reg-motor {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&motor_pins>;
regulator-name = "vcc-motor";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -90,8 +86,6 @@
};
&codec {
- pinctrl-names = "default";
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@@ -105,8 +99,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -118,15 +110,11 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@@ -134,8 +122,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_pins>;
reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
@@ -146,14 +132,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
- button@400 {
+ button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
- button@800 {
+ button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
@@ -162,8 +148,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -176,33 +160,13 @@
};
&pio {
- bl_en_pin_dsrv9703c: bl_en_pin@0 {
- pins = "PH7";
- function = "gpio_out";
- };
-
- codec_pa_pin: codec_pa_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-
- motor_pins: motor_pins@0 {
- pins = "PB3";
- function = "gpio_out";
- };
-
- touchscreen_pins: touchscreen_pins@0 {
- pins = "PB13";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -211,7 +175,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -250,7 +214,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index d8bfd7b74916..41ca8bded89f 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -72,8 +72,6 @@
*/
&codec {
/* PH15 controls power to external amplifier (ft2012q) */
- pinctrl-names = "default";
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -91,8 +89,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -104,8 +100,6 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@@ -122,21 +116,21 @@
status = "okay";
- button@158 {
+ button-158 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <158730>;
};
- button@349 {
+ button-349 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <349206>;
};
- button@1142 {
+ button-1142 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@@ -145,8 +139,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
@@ -154,13 +146,6 @@
status = "okay";
};
-&pio {
- codec_pa_pin: codec_pa_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -197,7 +182,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 856cfc9128e6..f33e42d6ce8b 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -80,8 +80,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy0>;
status = "okay";
};
@@ -92,7 +90,7 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -106,8 +104,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -123,27 +119,11 @@
status = "okay";
};
-&pio {
- pinctrl-names = "default";
- pinctrl-0 = <&hackberry_hogs>;
-
- hackberry_hogs: hogs@0 {
- pins = "PH19";
- function = "gpio_out";
- };
-
- usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
- pins = "PH12";
- function = "gpio_out";
- };
-};
-
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
- pinctrl-0 = <&usb2_vbus_pin_hackberry>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -156,6 +136,6 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 6506595268b2..35c57d065dd8 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -63,8 +63,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -78,8 +76,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -92,13 +88,13 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -116,7 +112,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index d51d8c302daf..9482e831a9a1 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en_pin_inet>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@@ -88,8 +86,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -101,8 +97,6 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@@ -115,8 +109,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5x: touchscreen@38 {
@@ -124,8 +116,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_wake_pin>;
wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
touchscreen-size-x = <600>;
touchscreen-size-y = <1024>;
@@ -137,21 +127,21 @@
vref-supply = <&reg_ldo2>;
status = "okay";
- button@200 {
+ button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
- button@1000 {
+ button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
- button@1200 {
+ button-1200 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -160,8 +150,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -178,23 +166,13 @@
};
&pio {
- bl_en_pin_inet: bl_en_pin@0 {
- pins = "PH7";
- function = "gpio_out";
- };
-
- touchscreen_wake_pin: touchscreen_wake_pin@0 {
- pins = "PB13";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -203,7 +181,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -246,7 +224,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index a8e479fe43ca..4b5c91c8e85b 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -72,8 +72,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -85,14 +83,10 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@@ -109,35 +103,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
- button@200 {
+ button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
- button@600 {
+ button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
- button@800 {
+ button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
- button@1000 {
+ button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
- button@1200 {
+ button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@@ -146,8 +140,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -160,13 +152,13 @@
};
&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -208,7 +200,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 2acb89a87d41..13224f5ac166 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -59,7 +59,7 @@
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_inet9f>;
@@ -67,7 +67,7 @@
#size-cells = <0>;
poll-interval = <20>;
- button@0 {
+ left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@@ -75,7 +75,7 @@
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
};
- button@1 {
+ left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@@ -83,7 +83,7 @@
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
};
- button@2 {
+ left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@@ -91,7 +91,7 @@
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
};
- button@3 {
+ left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@@ -99,7 +99,7 @@
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
};
- button@4 {
+ right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@@ -107,7 +107,7 @@
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
};
- button@5 {
+ right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@@ -115,7 +115,7 @@
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
};
- button@6 {
+ right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@@ -123,7 +123,7 @@
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
};
- button@7 {
+ right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@@ -131,7 +131,7 @@
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
};
- button@8 {
+ dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@@ -139,7 +139,7 @@
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
};
- button@9 {
+ dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@@ -147,7 +147,7 @@
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
};
- button@10 {
+ dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@@ -155,7 +155,7 @@
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
};
- button@11 {
+ dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@@ -163,49 +163,49 @@
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
};
- button@12 {
+ x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
};
- button@13 {
+ y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
};
- button@14 {
+ a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
};
- button@15 {
+ b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
};
- button@16 {
+ select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
};
- button@17 {
+ start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
};
- button@18 {
+ top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
};
- button@19 {
+ top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
@@ -222,8 +222,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -235,8 +233,6 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@@ -249,8 +245,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@@ -267,35 +261,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
- button@200 {
+ button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
- button@600 {
+ button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
- button@800 {
+ button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
- button@1000 {
+ button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
- button@1200 {
+ button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@@ -304,8 +298,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -318,7 +310,7 @@
};
&pio {
- key_pins_inet9f: key_pins@0 {
+ key_pins_inet9f: key-pins {
pins = "PA0", "PA1", "PA3", "PA4",
"PA5", "PA6", "PA8", "PA9",
"PA11", "PA12", "PA13",
@@ -328,13 +320,13 @@
bias-pull-up;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -376,7 +368,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
index 92e3e030ced3..d22bd79562d8 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -57,7 +57,7 @@
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
+ pinctrl-0 = <&emac_pins>;
phy = <&phy1>;
status = "okay";
};
@@ -67,6 +67,9 @@
};
&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
axp209: pmic@34 {
interrupts = <0>;
};
@@ -74,19 +77,19 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -100,7 +103,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -114,7 +117,11 @@
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>;
status = "okay";
};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 92b2d4af3d21..879141ca6027 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_q5>;
green {
label = "q5:green:usr";
@@ -74,8 +72,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&emac_power_pin_q5>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -98,8 +94,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -109,8 +103,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -125,7 +117,7 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@@ -139,8 +131,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -160,18 +150,6 @@
status = "okay";
};
-&pio {
- emac_power_pin_q5: emac_power_pin@0 {
- pins = "PH19";
- function = "gpio_out";
- };
-
- led_pins_q5: led_pins@0 {
- pins = "PH20";
- function = "gpio_out";
- };
-};
-
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@@ -187,7 +165,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 0f927da28ee1..435c551aef0f 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -61,8 +61,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_marsboard>;
red1 {
label = "marsboard:red1:usr";
@@ -107,27 +105,19 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -140,8 +130,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -162,12 +150,7 @@
};
&pio {
- led_pins_marsboard: led_pins@0 {
- pins = "PB5", "PB6", "PB7", "PB8";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -184,14 +167,14 @@
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>;
+ pinctrl-0 = <&spi0_pi_pins>,
+ <&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index a5ed9e4e22c6..1b639e5f9172 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -70,8 +70,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -86,18 +84,16 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
-&ir0_rx_pins_a {
+&ir0_rx_pins {
/* The ir receiver is not always populated */
bias-pull-up;
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -132,7 +128,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index 81db6824a2c7..7198b34e2e50 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -71,8 +71,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -88,23 +86,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- pins = "PH4";
- function = "gpio_in";
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- pins = "PH5";
- function = "gpio_in";
- };
-
- usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
- pins = "PH12";
- function = "gpio_out";
- };
-};
-
&reg_usb0_vbus {
status = "okay";
};
@@ -114,14 +95,13 @@
};
&reg_usb2_vbus {
- pinctrl-0 = <&usb2_vbus_pin_mk802>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@@ -131,8 +111,6 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
index e74a881fd9a7..e460da2eb139 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
@@ -67,8 +67,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -82,8 +80,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -105,7 +101,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 462412ee903c..49247fbe6acd 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -58,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -89,6 +100,10 @@
cooling-max-level = <2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -98,8 +113,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -108,9 +121,17 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -124,8 +145,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@@ -144,8 +163,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -166,24 +183,19 @@
};
&pio {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- pins = "PC3";
- function = "gpio_out";
- };
-
- led_pins_olinuxinolime: led_pins@0 {
+ led_pins_olinuxinolime: led-pin {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -191,7 +203,6 @@
};
&reg_ahci_5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -210,7 +221,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 84f55e76df0c..6e140547b638 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_pcduino>;
tx {
label = "pcduino:green:tx";
@@ -76,26 +74,24 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&key_pins_pcduino>;
#address-cells = <1>;
#size-cells = <0>;
- button@0 {
+ back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- button@1 {
+ home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- button@2 {
+ menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@@ -116,8 +112,6 @@
};
&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@@ -127,8 +121,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -146,8 +138,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -168,17 +158,7 @@
};
&pio {
- led_pins_pcduino: led_pins@0 {
- pins = "PH15", "PH16";
- function = "gpio_out";
- };
-
- key_pins_pcduino: key_pins@0 {
- pins = "PH17", "PH18", "PH19";
- function = "gpio_in";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@@ -214,7 +194,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
index 811d00ee2ade..bc4f128965ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
@@ -55,16 +55,7 @@
compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
};
-&pio {
- usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
- pins = "PD2";
- function = "gpio_out";
- };
-};
-
&reg_usb2_vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index c0f8c88b5a7d..5081303f79e7 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en_pin_protab>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@@ -72,8 +70,6 @@
};
&codec {
- pinctrl-names = "default";
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@@ -87,8 +83,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -100,20 +94,14 @@
#include "axp209.dtsi"
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
- pixcir_ts@5c {
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_pins>;
+ touchscreen@5c {
compatible = "pixcir,pixcir_tangoc";
reg = <0x5c>;
interrupt-parent = <&pio>;
@@ -132,14 +120,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
- button@400 {
+ button-400 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <400000>;
};
- button@800 {
+ button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -148,8 +136,6 @@
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -162,28 +148,13 @@
};
&pio {
- bl_en_pin_protab: bl_en_pin@0 {
- pins = "PH7";
- function = "gpio_out";
- };
-
- codec_pa_pin: codec_pa_pin@0 {
- pins = "PH15";
- function = "gpio_out";
- };
-
- touchscreen_pins: touchscreen_pins@0 {
- pins = "PA5", "PB13";
- function = "gpio_out";
- };
-
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@@ -192,7 +163,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -231,7 +202,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 41c2579143fd..b91300d49a31 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -41,14 +41,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&intc>;
aliases {
@@ -60,46 +60,48 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
- framebuffer@1 {
+ framebuffer-fe0-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
- framebuffer@2 {
+ framebuffer-fe0-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
- framebuffer@3 {
+ framebuffer-fe0-lcd0-tve0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 5>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -111,7 +113,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -127,7 +129,7 @@
};
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -141,14 +143,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <850000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
@@ -158,532 +160,46 @@
};
};
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
- osc32k: clk@0 {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
+ };
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <4>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>,
- <21>, <22>, <23>,
- <24>, <25>, <26>,
- <32>, <33>, <34>,
- <35>, <36>, <37>,
- <40>, <41>, <43>,
- <44>, <45>,
- <46>, <47>,
- <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1",
- "ahb_ohci1", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0",
- "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps",
- "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
- "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1",
- "ahb_de_fe0", "ahb_de_fe1",
- "ahb_mp", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <5>, <6>,
- <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis",
- "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <4>,
- <5>, <6>,
- <7>, <16>,
- <17>, <18>,
- <19>, <20>,
- <21>, <22>,
- <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can",
- "apb1_scr", "apb1_ps20",
- "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
+ de: display-engine {
+ compatible = "allwinner,sun4i-a10-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ status = "disabled";
};
- soc@01c00000 {
+ soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram-controller@01c00000 {
+ sram-controller@1c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
@@ -697,14 +213,14 @@
};
};
- sram_d: sram@00010000 {
+ sram_d: sram@10000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
- otg_sram: sram-section@0000 {
+ otg_sram: sram-section@0 {
compatible = "allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
@@ -712,19 +228,19 @@
};
};
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
- nfc: nand@01c03000 {
+ nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -733,11 +249,11 @@
#size-cells = <0>;
};
- spi0: spi@01c05000 {
+ spi0: spi@1c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -747,30 +263,34 @@
#size-cells = <0>;
};
- spi1: spi@01c06000 {
+ spi1: spi@1c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- emac: ethernet@01c0b000 {
+ emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins>;
status = "disabled";
};
- mdio: mdio@01c0b080 {
+ mdio: mdio@1c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
@@ -778,78 +298,154 @@
#size-cells = <0>;
};
- mmc0: mmc@01c0f000 {
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun4i-a10-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ resets = <&ccu RST_TCON0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_TCON0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+
+ tcon0_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun4i-a10-tcon";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <45>;
+ resets = <&ccu RST_TCON1>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD1>,
+ <&ccu CLK_TCON1_CH0>,
+ <&ccu CLK_TCON1_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon1-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon1>;
+ };
+
+ tcon1_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
+ mmc3: mmc@1c12000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
interrupts = <35>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- usb_otg: usb@01c13000 {
+ usb_otg: usb@1c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -859,51 +455,95 @@
status = "disabled";
};
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
- ehci0: usb@01c14000 {
+ ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- ohci0: usb@01c14400 {
+ ohci0: usb@1c14400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- crypto: crypto-engine@01c15000 {
+ crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
- spi2: spi@01c17000 {
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun4i-a10-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <58>;
+ clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+ <&ccu 9>,
+ <&ccu 18>;
+ clock-names = "ahb", "mod", "pll-0", "pll-1";
+ dmas = <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_DEDICATED 24>;
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -913,39 +553,39 @@
#size-cells = <0>;
};
- ahci: sata@01c18000 {
+ ahci: sata@1c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <56>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
status = "disabled";
};
- ehci1: usb@01c1c000 {
+ ehci1: usb@1c1c000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <40>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- ohci1: usb@01c1c400 {
+ ohci1: usb@1c1c400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <65>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- spi3: spi@01c1f000 {
+ spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <50>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -955,30 +595,39 @@
#size-cells = <0>;
};
- intc: interrupt-controller@01c20400 {
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun4i-a10-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ intc: interrupt-controller@1c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
interrupt-controller;
#interrupt-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
- can0_pins_a: can0@0 {
+ can0_ph_pins: can0-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
- emac_pins_a: emac0@0 {
+ emac_pins: emac0-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -987,42 +636,42 @@
function = "emac";
};
- i2c0_pins_a: i2c0@0 {
+ i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
- i2c1_pins_a: i2c1@0 {
+ i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
- i2c2_pins_a: i2c2@0 {
+ i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
- ir0_rx_pins_a: ir0@0 {
+ ir0_rx_pins: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
- ir0_tx_pins_a: ir0@1 {
+ ir0_tx_pins: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
- ir1_rx_pins_a: ir1@0 {
+ ir1_rx_pins: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
- ir1_tx_pins_a: ir1@1 {
+ ir1_tx_pins: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -1030,107 +679,107 @@
bias-pull-up;
};
- ps20_pins_a: ps20@0 {
+ ps2_ch0_pins: ps2-ch0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
- ps21_pins_a: ps21@0 {
+ ps2_ch1_ph_pins: ps2-ch1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
- pwm0_pins_a: pwm0@0 {
+ pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
- pwm1_pins_a: pwm1@0 {
+ pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
- spdif_tx_pins_a: spdif@0 {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
- spi0_pins_a: spi0@0 {
+ spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
- spi0_cs0_pins_a: spi0_cs0@0 {
+ spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
- spi1_pins_a: spi1@0 {
+ spi1_pins: spi1-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
- spi1_cs0_pins_a: spi1_cs0@0 {
+ spi1_cs0_pin: spi1-cs0-pin {
pins = "PI16";
function = "spi1";
};
- spi2_pins_a: spi2@0 {
- pins = "PC20", "PC21", "PC22";
+ spi2_pb_pins: spi2-pb-pins {
+ pins = "PB15", "PB16", "PB17";
function = "spi2";
};
- spi2_pins_b: spi2@1 {
- pins = "PB15", "PB16", "PB17";
+ spi2_pc_pins: spi2-pc-pins {
+ pins = "PC20", "PC21", "PC22";
function = "spi2";
};
- spi2_cs0_pins_a: spi2_cs0@0 {
- pins = "PC19";
+ spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+ pins = "PB14";
function = "spi2";
};
- spi2_cs0_pins_b: spi2_cs0@1 {
- pins = "PB14";
+ spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+ pins = "PC19";
function = "spi2";
};
- uart0_pins_a: uart0@0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
- uart0_pins_b: uart0@1 {
+ uart0_pf_pins: uart0-pf-pins {
pins = "PF2", "PF4";
function = "uart0";
};
- uart1_pins_a: uart1@0 {
+ uart1_pins: uart1-pins {
pins = "PA10", "PA11";
function = "uart1";
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
};
- wdt: watchdog@01c20c90 {
+ wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
- rtc: rtc@01c20d00 {
+ rtc: rtc@1c20d00 {
compatible = "allwinner,sun4i-a10-rtc";
reg = <0x01c20d00 0x20>;
interrupts = <24>;
};
- pwm: pwm@01c20e00 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun4i-a10-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
@@ -1138,12 +787,12 @@
status = "disabled";
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1151,37 +800,50 @@
status = "disabled";
};
- ir0: ir@01c21800 {
+ ir0: ir@1c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
- ir1: ir@01c21c00 {
+ ir1: ir@1c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <6>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
- lradc: lradc@01c22800 {
+ i2s0: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <16>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma SUN4I_DMA_NORMAL 3>,
+ <&dma SUN4I_DMA_NORMAL 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <31>;
status = "disabled";
};
- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1189,150 +851,316 @@
status = "disabled";
};
- sid: eeprom@01c23800 {
+ sid: eeprom@1c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
- uart5: serial@01c29400 {
+ uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
- uart6: serial@01c29800 {
+ uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
- uart7: serial@01c29c00 {
+ uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
- ps20: ps2@01c2a000 {
+ ps20: ps2@1c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <62>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
- ps21: ps2@01c2a400 {
+ ps21: ps2@1c2a400 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- can0: can@01c2bc00 {
+ can0: can@1c2bc00 {
compatible = "allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <26>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
+
+ fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun4i-a10-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_DRAM_DE_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
+ };
+
+ fe1: display-frontend@1e20000 {
+ compatible = "allwinner,sun4i-a10-display-frontend";
+ reg = <0x01e20000 0x20000>;
+ interrupts = <48>;
+ clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+ <&ccu CLK_DRAM_DE_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe1>;
+ };
+
+ fe1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@1e40000 {
+ compatible = "allwinner,sun4i-a10-display-backend";
+ reg = <0x01e40000 0x10000>;
+ interrupts = <48>;
+ clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+ <&ccu CLK_DRAM_DE_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be1>;
+ };
+
+ be1_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+
+ be1_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be1>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@1e60000 {
+ compatible = "allwinner,sun4i-a10-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DRAM_DE_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+
+ be0_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+
+ be0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 18f25c5e75ae..6ae4d95e230e 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -76,8 +76,8 @@
allwinner,pipelines = <&fe0>;
};
- soc@01c00000 {
- hdmi: hdmi@01c16000 {
+ soc@1c00000 {
+ hdmi: hdmi@1c16000 {
compatible = "allwinner,sun5i-a10s-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <58>;
@@ -111,7 +111,7 @@
};
};
- pwm: pwm@01c20e00 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&ccu CLK_HOSC>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 6436bad94404..4e830f5cb7f1 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -88,8 +88,8 @@
allwinner,pipelines = <&fe0>;
};
- soc@01c00000 {
- pwm: pwm@01c20e00 {
+ soc@1c00000 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&ccu CLK_HOSC>;
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi
index 3eb56cad0cea..ef0b7446a99d 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
@@ -54,8 +54,8 @@
allwinner,pipelines = <&fe0>;
};
- soc@01c00000 {
- pwm: pwm@01c20e00 {
+ soc@1c00000 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&ccu CLK_HOSC>;
@@ -63,7 +63,7 @@
status = "disabled";
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
@@ -76,7 +76,7 @@
status = "disabled";
};
- i2s0: i2s@01c22400 {
+ i2s0: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 8a4d2277826f..49229b3d5492 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -110,6 +110,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&lradc {
vref-supply = <&reg_ldo2>;
};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 98cc00341b00..07f2248ed5f8 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -93,7 +93,7 @@
#size-cells = <1>;
ranges;
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -108,20 +108,20 @@
};
};
- soc@01c00000 {
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram-controller@01c00000 {
+ sram-controller@1c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
@@ -135,14 +135,14 @@
status = "disabled";
};
- sram_d: sram@00010000 {
+ sram_d: sram@10000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
- otg_sram: sram-section@0000 {
+ otg_sram: sram-section@0 {
compatible = "allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
@@ -150,7 +150,7 @@
};
};
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
@@ -158,7 +158,7 @@
#dma-cells = <2>;
};
- nfc: nand@01c03000 {
+ nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
@@ -171,7 +171,7 @@
#size-cells = <0>;
};
- spi0: spi@01c05000 {
+ spi0: spi@1c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
@@ -185,7 +185,7 @@
#size-cells = <0>;
};
- spi1: spi@01c06000 {
+ spi1: spi@1c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
@@ -199,7 +199,7 @@
#size-cells = <0>;
};
- tve0: tv-encoder@01c0a000 {
+ tve0: tv-encoder@1c0a000 {
compatible = "allwinner,sun4i-a10-tv-encoder";
reg = <0x01c0a000 0x1000>;
clocks = <&ccu CLK_AHB_TVE>;
@@ -217,7 +217,7 @@
};
};
- emac: ethernet@01c0b000 {
+ emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
@@ -226,7 +226,7 @@
status = "disabled";
};
- mdio: mdio@01c0b080 {
+ mdio: mdio@1c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
@@ -234,7 +234,7 @@
#size-cells = <0>;
};
- tcon0: lcd-controller@01c0c000 {
+ tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
@@ -278,7 +278,7 @@
};
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
@@ -289,7 +289,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
@@ -300,7 +300,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
@@ -311,7 +311,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c13000 {
+ usb_otg: usb@1c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
clocks = <&ccu CLK_AHB_OTG>;
@@ -324,7 +324,7 @@
status = "disabled";
};
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4>;
@@ -336,7 +336,7 @@
status = "disabled";
};
- ehci0: usb@01c14000 {
+ ehci0: usb@1c14000 {
compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
@@ -346,7 +346,7 @@
status = "disabled";
};
- ohci0: usb@01c14400 {
+ ohci0: usb@1c14400 {
compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <40>;
@@ -356,7 +356,7 @@
status = "disabled";
};
- crypto: crypto-engine@01c15000 {
+ crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun5i-a13-crypto",
"allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
@@ -365,7 +365,7 @@
clock-names = "ahb", "mod";
};
- spi2: spi@01c17000 {
+ spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
@@ -379,7 +379,7 @@
#size-cells = <0>;
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
@@ -387,14 +387,14 @@
#reset-cells = <1>;
};
- intc: interrupt-controller@01c20400 {
+ intc: interrupt-controller@1c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
interrupt-controller;
#interrupt-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
reg = <0x01c20800 0x400>;
interrupts = <28>;
clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
@@ -538,19 +538,19 @@
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&ccu CLK_HOSC>;
};
- wdt: watchdog@01c20c90 {
+ wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
- ir0: ir@01c21800 {
+ ir0: ir@1c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
clock-names = "apb", "ir";
@@ -559,14 +559,14 @@
status = "disabled";
};
- lradc: lradc@01c22800 {
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <31>;
status = "disabled";
};
- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
@@ -579,19 +579,19 @@
status = "disabled";
};
- sid: eeprom@01c23800 {
+ sid: eeprom@1c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
@@ -601,7 +601,7 @@
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
@@ -611,7 +611,7 @@
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <3>;
@@ -621,7 +621,7 @@
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <4>;
@@ -631,7 +631,7 @@
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
@@ -641,7 +641,7 @@
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
@@ -651,7 +651,7 @@
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
@@ -661,14 +661,14 @@
#size-cells = <0>;
};
- timer@01c60000 {
+ timer@1c60000 {
compatible = "allwinner,sun5i-a13-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <82>, <83>;
clocks = <&ccu CLK_AHB_HSTIMER>;
};
- fe0: display-frontend@01e00000 {
+ fe0: display-frontend@1e00000 {
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
@@ -696,7 +696,7 @@
};
};
- be0: display-backend@01e60000 {
+ be0: display-backend@1e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <47>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 9ecb5f0b3f83..19e382a11297 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -62,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
vga-connector {
compatible = "vga-connector";
@@ -162,6 +173,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index eef072a21acc..8bfa12b548e0 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -221,7 +221,7 @@
clock-output-names = "gmac_int_tx";
};
- gmac_tx_clk: clk@01c200d0 {
+ gmac_tx_clk: clk@1c200d0 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c200d0 0x4>;
@@ -236,13 +236,13 @@
status = "disabled";
};
- soc@01c00000 {
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -251,7 +251,7 @@
#dma-cells = <1>;
};
- tcon0: lcd-controller@01c0c000 {
+ tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -278,17 +278,28 @@
reg = <0>;
remote-endpoint = <&drc0_out_tcon0>;
};
+
+ tcon0_in_drc1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&drc1_out_tcon0>;
+ };
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
- tcon1: lcd-controller@01c0d000 {
+ tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,6 +322,11 @@
#size-cells = <0>;
reg = <0>;
+ tcon1_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon1>;
+ };
+
tcon1_in_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_out_tcon1>;
@@ -321,11 +337,17 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_AHB1_MMC0>,
@@ -344,7 +366,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_AHB1_MMC1>,
@@ -363,7 +385,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_AHB1_MMC2>,
@@ -382,7 +404,7 @@
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
+ mmc3: mmc@1c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ccu CLK_AHB1_MMC3>,
@@ -401,7 +423,50 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun6i-a31-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+ <&ccu CLK_HDMI_DDC>,
+ <&ccu 7>,
+ <&ccu 13>;
+ clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+ resets = <&ccu RST_AHB1_HDMI>;
+ reset-names = "ahb";
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_AHB1_OTG>;
@@ -414,7 +479,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun6i-a31-usb-phy";
reg = <0x01c19400 0x10>,
<0x01c1a800 0x4>,
@@ -438,7 +503,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -449,7 +514,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -460,7 +525,7 @@
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -471,7 +536,7 @@
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -482,7 +547,7 @@
status = "disabled";
};
- ohci2: usb@01c1c400 {
+ ohci2: usb@1c1c400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -491,7 +556,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -500,7 +565,7 @@
#reset-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -633,7 +698,7 @@
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -644,12 +709,12 @@
clocks = <&osc24M>;
};
- wdt1: watchdog@01c20ca0 {
+ wdt1: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-spdif";
reg = <0x01c21000 0x400>;
@@ -662,21 +727,47 @@
status = "disabled";
};
- lradc: lradc@01c22800 {
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+ resets = <&ccu RST_APB1_DAUDIO0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+ resets = <&ccu RST_APB1_DAUDIO1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -689,7 +780,7 @@
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -702,7 +793,7 @@
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -715,7 +806,7 @@
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -728,7 +819,7 @@
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -741,7 +832,7 @@
status = "disabled";
};
- uart5: serial@01c29400 {
+ uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -754,7 +845,7 @@
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -765,7 +856,7 @@
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -776,7 +867,7 @@
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -787,7 +878,7 @@
#size-cells = <0>;
};
- i2c3: i2c@01c2b800 {
+ i2c3: i2c@1c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -798,7 +889,7 @@
#size-cells = <0>;
};
- gmac: ethernet@01c30000 {
+ gmac: ethernet@1c30000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c30000 0x1054>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -815,7 +906,7 @@
#size-cells = <0>;
};
- crypto: crypto-engine@01c15000 {
+ crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun6i-a31-crypto",
"allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
@@ -826,7 +917,7 @@
reset-names = "ahb";
};
- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-codec";
reg = <0x01c22c00 0x400>;
@@ -839,7 +930,7 @@
status = "disabled";
};
- timer@01c60000 {
+ timer@1c60000 {
compatible = "allwinner,sun6i-a31-hstimer",
"allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
@@ -851,7 +942,7 @@
resets = <&ccu RST_AHB1_HSTIMER>;
};
- spi0: spi@01c68000 {
+ spi0: spi@1c68000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -863,7 +954,7 @@
status = "disabled";
};
- spi1: spi@01c69000 {
+ spi1: spi@1c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -875,7 +966,7 @@
status = "disabled";
};
- spi2: spi@01c6a000 {
+ spi2: spi@1c6a000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
@@ -887,7 +978,7 @@
status = "disabled";
};
- spi3: spi@01c6b000 {
+ spi3: spi@1c6b000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6b000 0x1000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
@@ -899,7 +990,7 @@
status = "disabled";
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
@@ -910,7 +1001,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- fe0: display-frontend@01e00000 {
+ fe0: display-frontend@1e00000 {
compatible = "allwinner,sun6i-a31-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -942,7 +1033,7 @@
};
};
- fe1: display-frontend@01e20000 {
+ fe1: display-frontend@1e20000 {
compatible = "allwinner,sun6i-a31-display-frontend";
reg = <0x01e20000 0x20000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -974,7 +1065,7 @@
};
};
- be1: display-backend@01e40000 {
+ be1: display-backend@1e40000 {
compatible = "allwinner,sun6i-a31-display-backend";
reg = <0x01e40000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1020,7 +1111,7 @@
};
};
- drc1: drc@01e50000 {
+ drc1: drc@1e50000 {
compatible = "allwinner,sun6i-a31-drc";
reg = <0x01e50000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -1053,6 +1144,11 @@
#size-cells = <0>;
reg = <1>;
+ drc1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc1>;
+ };
+
drc1_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc1>;
@@ -1061,7 +1157,7 @@
};
};
- be0: display-backend@01e60000 {
+ be0: display-backend@1e60000 {
compatible = "allwinner,sun6i-a31-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1107,7 +1203,7 @@
};
};
- drc0: drc@01e70000 {
+ drc0: drc@1e70000 {
compatible = "allwinner,sun6i-a31-drc";
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -1144,11 +1240,16 @@
reg = <0>;
remote-endpoint = <&tcon0_in_drc0>;
};
+
+ drc0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_drc0>;
+ };
};
};
};
- rtc: rtc@01f00000 {
+ rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -1163,7 +1264,7 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
- prcm@01f01400 {
+ prcm@1f01400 {
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
@@ -1215,12 +1316,12 @@
};
};
- cpucfg@01f01c00 {
+ cpucfg@1f01c00 {
compatible = "allwinner,sun6i-a31-cpuconfig";
reg = <0x01f01c00 0x300>;
};
- ir: ir@01f02000 {
+ ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clock-names = "apb", "ir";
@@ -1230,7 +1331,7 @@
status = "disabled";
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun6i-a31-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
@@ -1255,7 +1356,7 @@
};
};
- p2wi: i2c@01f03400 {
+ p2wi: i2c@1f03400 {
compatible = "allwinner,sun6i-a31-p2wi";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 4c10123509c4..0cdb38ab3377 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -52,17 +52,42 @@
/ {
model = "MSI Primo81 tablet";
compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "c";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index b3d98222bd81..298476485bb4 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -53,6 +53,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -90,6 +101,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
/* USB 2.0 4 port hub IC */
status = "okay";
@@ -112,6 +127,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index eb55e74232c9..4ed3162e3e5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -109,6 +120,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -130,6 +145,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 2a50207618cb..39f43e4eb742 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -91,6 +102,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -111,6 +126,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 852a0aa24dce..8c9bedc602ec 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -126,6 +137,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -146,6 +161,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 004b6ddac813..442f3c755f36 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -98,6 +109,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -173,6 +188,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -241,6 +266,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_ahci_5v {
gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 2ce1a9f13a17..edf9c3c6c0d7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -62,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -80,6 +91,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -100,6 +115,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 097bd755764c..ba250189d07f 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -85,6 +96,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -105,6 +120,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 000000000000..d99e7b193efe
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,70 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+ model = "Olimex A20-OLinuXino-MICRO-eMMC";
+ compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 0b7403e4d687..dffbaa24b3ee 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -66,6 +66,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +103,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -102,7 +117,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -112,6 +127,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -229,6 +254,11 @@
};
&pio {
+ gmac_txerr: gmac_txerr@0 {
+ pins = "PA17";
+ function = "gmac";
+ };
+
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
pins = "PH11";
function = "gpio_in";
@@ -256,6 +286,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -330,6 +368,10 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee776e145..68dfa82544fc 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,9 +46,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -66,9 +66,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+ <&ccu CLK_HDMI>;
status = "disabled";
};
@@ -76,9 +77,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -86,10 +87,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -102,7 +103,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -181,23 +182,13 @@
#size-cells = <1>;
ranges;
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -205,528 +196,6 @@
clock-output-names = "osc32k";
};
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: clk@01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: clk@01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: clk@01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: clk@01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: clk@01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: clk@01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -736,71 +205,50 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@2 {
+ mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@3 {
+ gmac_int_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_int_tx";
};
- gmac_tx_clk: clk@01c20164 {
+ gmac_tx_clk: clk@1c20164 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c20164 0x4>;
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
+ };
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk@1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
- clk_out_a: clk@01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: clk@01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
+ de: display-engine {
+ compatible = "allwinner,sun7i-a20-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ status = "disabled";
};
- soc@01c00000 {
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram-controller@01c00000 {
+ sram-controller@1c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
@@ -814,14 +262,14 @@
};
};
- sram_d: sram@00010000 {
+ sram_d: sram@10000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
- otg_sram: sram-section@0000 {
+ otg_sram: sram-section@0 {
compatible = "allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
@@ -829,7 +277,7 @@
};
};
- nmi_intc: interrupt-controller@01c00030 {
+ nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
@@ -837,19 +285,19 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
- nfc: nand@01c03000 {
+ nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -858,11 +306,11 @@
#size-cells = <0>;
};
- spi0: spi@01c05000 {
+ spi0: spi@1c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -873,11 +321,11 @@
num-cs = <4>;
};
- spi1: spi@01c06000 {
+ spi1: spi@1c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -888,16 +336,16 @@
num-cs = <1>;
};
- emac: ethernet@01c0b000 {
+ emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
- mdio: mdio@01c0b080 {
+ mdio: mdio@1c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
@@ -905,13 +353,111 @@
#size-cells = <0>;
};
- mmc0: mmc@01c0f000 {
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun7i-a20-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_TCON0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_TCON0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+
+ tcon0_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun7i-a20-tcon";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_TCON1>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD1>,
+ <&ccu CLK_TCON1_CH0>,
+ <&ccu CLK_TCON1_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon1-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon1>;
+ };
+
+ tcon1_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -922,13 +468,13 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -939,13 +485,13 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -956,13 +502,13 @@
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
+ mmc3: mmc@1c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -973,10 +519,10 @@
#size-cells = <0>;
};
- usb_otg: usb@01c13000 {
+ usb_otg: usb@1c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -986,52 +532,97 @@
status = "disabled";
};
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
- ehci0: usb@01c14000 {
+ ehci0: usb@1c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- ohci0: usb@01c14400 {
+ ohci0: usb@1c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- crypto: crypto-engine@01c15000 {
+ crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun7i-a20-crypto",
"allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
- spi2: spi@01c17000 {
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun7i-a20-hdmi",
+ "allwinner,sun5i-a10s-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+ <&ccu 9>,
+ <&ccu 18>;
+ clock-names = "ahb", "mod", "pll-0", "pll-1";
+ dmas = <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_DEDICATED 24>;
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1042,39 +633,39 @@
num-cs = <1>;
};
- ahci: sata@01c18000 {
+ ahci: sata@1c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
status = "disabled";
};
- ehci1: usb@01c1c000 {
+ ehci1: usb@1c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- ohci1: usb@01c1c400 {
+ ohci1: usb@1c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- spi3: spi@01c1f000 {
+ spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1085,11 +676,20 @@
num-cs = <1>;
};
- pio: pinctrl@01c20800 {
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1324,7 +924,7 @@
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
@@ -1336,18 +936,18 @@
clocks = <&osc24M>;
};
- wdt: watchdog@01c20c90 {
+ wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
- rtc: rtc@01c20d00 {
+ rtc: rtc@1c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
- pwm: pwm@01c20e00 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
@@ -1355,12 +955,12 @@
status = "disabled";
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1368,30 +968,30 @@
status = "disabled";
};
- ir0: ir@01c21800 {
+ ir0: ir@1c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
- ir1: ir@01c21c00 {
+ ir1: ir@1c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
- i2s1: i2s@01c22000 {
+ i2s1: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1399,12 +999,12 @@
status = "disabled";
};
- i2s0: i2s@01c22400 {
+ i2s0: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1412,19 +1012,19 @@
status = "disabled";
};
- lradc: lradc@01c22800 {
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1432,17 +1032,17 @@
status = "disabled";
};
- sid: eeprom@01c23800 {
+ sid: eeprom@1c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
- i2s2: i2s@01c24400 {
+ i2s2: i2s@1c24400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1450,179 +1050,179 @@
status = "disabled";
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
- uart5: serial@01c29400 {
+ uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
- uart6: serial@01c29800 {
+ uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
- uart7: serial@01c29c00 {
+ uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
- ps20: ps2@01c2a000 {
+ ps20: ps2@1c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
- ps21: ps2@01c2a400 {
+ ps21: ps2@1c2a400 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c3: i2c@01c2b800 {
+ i2c3: i2c@1c2b800 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- can0: can@01c2bc00 {
+ can0: can@1c2bc00 {
compatible = "allwinner,sun7i-a20-can",
"allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
- i2c4: i2c@01c2c000 {
+ i2c4: i2c@1c2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- gmac: ethernet@01c50000 {
+ gmac: ethernet@1c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1632,17 +1232,17 @@
#size-cells = <0>;
};
- hstimer@01c60000 {
+ hstimer@1c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
@@ -1653,5 +1253,164 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun7i-a20-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_DRAM_DE_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
+ };
+
+ fe1: display-frontend@1e20000 {
+ compatible = "allwinner,sun7i-a20-display-frontend";
+ reg = <0x01e20000 0x20000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+ <&ccu CLK_DRAM_DE_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe1>;
+ };
+
+ fe1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@1e40000 {
+ compatible = "allwinner,sun7i-a20-display-backend";
+ reg = <0x01e40000 0x10000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+ <&ccu CLK_DRAM_DE_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be1>;
+ };
+
+ be1_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+
+ be1_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be1>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@1e60000 {
+ compatible = "allwinner,sun7i-a20-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DRAM_DE_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+
+ be0_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+
+ be0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index ea50dda75adc..971f9be699a7 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -118,13 +118,13 @@
};
};
- soc@01c00000 {
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -133,7 +133,7 @@
#dma-cells = <1>;
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
@@ -152,7 +152,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
@@ -171,7 +171,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
@@ -190,7 +190,7 @@
#size-cells = <0>;
};
- nfc: nand@01c03000 {
+ nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -203,7 +203,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -216,7 +216,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
/*
* compatible and address regions get set in
* SoC specific dtsi file
@@ -233,7 +233,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -244,7 +244,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -255,7 +255,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
@@ -263,7 +263,7 @@
#reset-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
/* interrupts get set in SoC specific dtsi file */
@@ -344,7 +344,7 @@
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -352,13 +352,13 @@
clocks = <&osc24M>;
};
- wdt0: watchdog@01c20ca0 {
+ wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
- pwm: pwm@01c21400 {
+ pwm: pwm@1c21400 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c21400 0xc>;
clocks = <&osc24M>;
@@ -366,14 +366,14 @@
status = "disabled";
};
- lradc: lradc@01c22800 {
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -386,7 +386,7 @@
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -399,7 +399,7 @@
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -412,7 +412,7 @@
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +425,7 @@
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -438,7 +438,7 @@
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -449,7 +449,7 @@
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -460,7 +460,7 @@
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -498,7 +498,7 @@
assigned-clock-rates = <384000000>;
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
@@ -509,7 +509,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- rtc: rtc@01f00000 {
+ rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -527,7 +527,7 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
- prcm@01f01400 {
+ prcm@1f01400 {
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
@@ -575,12 +575,12 @@
};
};
- cpucfg@01f01c00 {
+ cpucfg@1f01c00 {
compatible = "allwinner,sun8i-a23-cpuconfig";
reg = <0x01f01c00 0x300>;
};
- r_uart: serial@01f02800 {
+ r_uart: serial@1f02800 {
compatible = "snps,dw-apb-uart";
reg = <0x01f02800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -591,7 +591,7 @@
status = "disabled";
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,7 +618,7 @@
};
};
- r_rsb: rsb@01f03400 {
+ r_rsb: rsb@1f03400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 4d1f929780a8..58e6585b504b 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -49,8 +49,8 @@
reg = <0x40000000 0x40000000>;
};
- soc@01c00000 {
- codec: codec@01c22c00 {
+ soc@1c00000 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a23-codec";
reg = <0x01c22c00 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 22660919bd08..50eb84fa246a 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -203,8 +203,8 @@
};
};
- soc@01c00000 {
- tcon0: lcd-controller@01c0c000 {
+ soc@1c00000 {
+ tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-a33-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -240,7 +240,7 @@
};
};
- crypto: crypto-engine@01c15000 {
+ crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -250,7 +250,7 @@
reset-names = "ahb";
};
- dai: dai@01c22c00 {
+ dai: dai@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-i2s";
reg = <0x01c22c00 0x200>;
@@ -263,7 +263,7 @@
status = "disabled";
};
- codec: codec@01c22e00 {
+ codec: codec@1c22e00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
@@ -273,14 +273,14 @@
status = "disabled";
};
- ths: ths@01c25000 {
+ ths: ths@1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
#thermal-sensor-cells = <0>;
#io-channel-cells = <0>;
};
- fe0: display-frontend@01e00000 {
+ fe0: display-frontend@1e00000 {
compatible = "allwinner,sun8i-a33-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -308,7 +308,7 @@
};
};
- be0: display-backend@01e60000 {
+ be0: display-backend@1e60000 {
compatible = "allwinner,sun8i-a33-display-backend";
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
reg-names = "be", "sat";
@@ -350,7 +350,7 @@
};
};
- drc0: drc@01e70000 {
+ drc0: drc@1e70000 {
compatible = "allwinner,sun8i-a33-drc";
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 1f0d60afb25b..5091cecbcd1e 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -43,7 +43,8 @@
/dts-v1/;
#include "sun8i-a83t.dtsi"
-#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
@@ -56,6 +57,26 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ reg_usb0_vbus: reg-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ };
+
+ reg_usb1_vbus: reg-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ };
};
&ehci0 {
@@ -65,7 +86,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&reg_vcc3v0>;
+ vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
bus-width = <4>;
cd-inverted;
@@ -75,7 +96,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
- vmmc-supply = <&reg_vcc3v0>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -86,16 +108,6 @@
status = "okay";
};
-&reg_usb0_vbus {
- gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
- status = "okay";
-};
-
-&reg_usb1_vbus {
- gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- status = "okay";
-};
-
&r_rsb {
status = "okay";
@@ -104,6 +116,8 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <&reg_dcdc1>;
+ swin-supply = <&reg_dcdc1>;
};
ac100: codec@e89 {
@@ -131,6 +145,113 @@
};
};
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+ /*
+ * The PHY requires 20ms after all voltages are applied until core
+ * logic is ready and 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+ /*
+ * Despite the embedded CPUs core not being used in any way,
+ * this must remain on or the system will hang.
+ */
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+ regulator-name = "vcc-wifi";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 2bafd7e99ef7..c606af3dbfed 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -44,7 +44,6 @@
/dts-v1/;
#include "sun8i-a83t.dtsi"
-#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -59,6 +58,27 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ reg_usb1_vbus: reg-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "ext_clock";
+ /* The WiFi low power clock must be 32768 Hz */
+ assigned-clocks = <&ac100_rtc 1>;
+ assigned-clock-rates = <32768>;
+ /* enables internal regulator and de-asserts reset */
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+ };
};
&ehci0 {
@@ -71,17 +91,35 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
status = "okay";
};
+&mmc1 {
+ vmmc-supply = <&reg_dldo1>;
+ vqmmc-supply = <&reg_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -96,6 +134,10 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <&reg_dcdc1>;
+ fldoin-supply = <&reg_dcdc5>;
+ swin-supply = <&reg_dcdc1>;
+ x-powers,drive-vbus-en;
};
ac100: codec@e89 {
@@ -123,17 +165,126 @@
};
};
-&reg_usb1_vbus {
- gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+ /* schematics says 3.1V but FEX file says 3.3V */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ /*
+ * This powers both the WiFi/BT module's main power, I/O supply,
+ * and external pull-ups on all the data lines. It should be set
+ * to the same voltage as the I/O supply (DCDC1 in this case) to
+ * avoid any leakage or mismatch.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
status = "okay";
};
-&reg_vcc3v0 {
- status = "disabled";
+&reg_fldo1 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+ /*
+ * Despite the embedded CPUs core not being used in any way,
+ * this must remain on or the system will hang.
+ */
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
};
-&reg_vcc5v0 {
- status = "disabled";
+&reg_sw {
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
+ regulator-name = "vcc-ephy";
};
&uart0 {
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index 716a205c6dbb..7f0a3f6d0cf2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -44,7 +44,6 @@
/dts-v1/;
#include "sun8i-a83t.dtsi"
-#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -95,6 +94,26 @@
refclk-frequency = <19200000>;
};
+ reg_usb1_vbus: reg-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+ };
+
+ reg_usb2_vbus: reg-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -112,6 +131,17 @@
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "ext_clock";
+ /* The WiFi low power clock must be 32768 Hz */
+ assigned-clocks = <&ac100_rtc 1>;
+ assigned-clock-rates = <32768>;
+ /* enables internal regulator and de-asserts reset */
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+ };
};
&ehci0 {
@@ -127,17 +157,26 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
status = "okay";
};
+&mmc1 {
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_sw>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -152,6 +191,9 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <&reg_dcdc1>;
+ swin-supply = <&reg_dcdc1>;
+ x-powers,drive-vbus-en;
};
ac100: codec@e89 {
@@ -179,22 +221,143 @@
};
};
-&reg_usb1_vbus {
- gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
- status = "okay";
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
};
-&reg_usb2_vbus {
- gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+&reg_dcdc1 {
+ /*
+ * The schematics say this should be 3.3V, but the FEX file says
+ * it should be 3V. The latter makes sense, as the WiFi module's
+ * I/O is indirectly powered from DCDC1, through SW. It is rated
+ * at 2.98V maximum.
+ */
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+ /*
+ * The PHY requires 20ms after all voltages are applied until core
+ * logic is ready and 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
status = "okay";
};
-&reg_vcc3v0 {
- status = "disabled";
+&reg_eldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+ /* TODO should be handled by USB PHY */
+ regulator-always-on;
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+ /*
+ * Despite the embedded CPUs core not being used in any way,
+ * this must remain on or the system will hang.
+ */
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
};
-&reg_vcc5v0 {
- status = "disabled";
+&reg_sw {
+ regulator-name = "vcc-wifi-io";
};
&spdif {
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 000000000000..98715538932f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,349 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "TBS A711 Tablet";
+ compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vbat: reg-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ reg_vmain: reg-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&reg_vbat>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+ /*
+ * This is actually Bluetooth's clock, but we have to
+ * hook it up somewheere
+ */
+ clocks = <&ac100_rtc 1>;
+ clock-names = "ext_clock";
+ };
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+ status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_dcdc1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_dldo1>;
+ vqmmc-supply = <&reg_dldo1>;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp81x: pmic@3a3 {
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ swin-supply = <&reg_dcdc1>;
+ x-powers,drive-vbus-en;
+ };
+
+ ac100: codec@e89 {
+ compatible = "x-powers,ac100";
+ reg = <0xe89>;
+
+ ac100_codec: codec {
+ compatible = "x-powers,ac100-codec";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+ #clock-cells = <0>;
+ clock-output-names = "4M_adda";
+ };
+
+ ac100_rtc: rtc {
+ compatible = "x-powers,ac100-rtc";
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ac100_codec>;
+ #clock-cells = <1>;
+ clock-output-names = "cko1_rtc",
+ "cko2_rtc",
+ "cko3_rtc";
+ };
+ };
+
+};
+
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-name = "vcc-ctp";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-name = "vcc-vb";
+ status = "okay";
+};
+
+&reg_sw {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-name = "vcc-lcd";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus_supply = <&reg_vmain>;
+ usb2_vbus_supply = <&reg_vmain>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index f996bd343e50..19acae1b4089 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -54,12 +54,6 @@
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- };
-
- chosen {
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -218,6 +212,8 @@
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -242,7 +238,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a83t-musb",
"allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
@@ -348,6 +344,14 @@
bias-pull-up;
};
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
pins = "PC5", "PC6", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13",
@@ -371,6 +375,16 @@
pins = "PF2", "PF4";
function = "uart0";
};
+
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
};
timer@1c20c00 {
@@ -404,7 +418,7 @@
status = "disabled";
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -415,6 +429,17 @@
status = "disabled";
};
+ uart1: serial@1c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index b1502df7b509..6713d0f2b3f4 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -56,6 +56,8 @@
aliases {
serial0 = &uart0;
+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet0 = &emac;
ethernet1 = &xr819;
};
@@ -102,6 +104,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index a337af1de322..f2292deaa590 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -52,6 +52,7 @@
compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
};
@@ -63,7 +64,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&pwr_led_bpi_m2p>;
pwr_led {
label = "bananapi-m2-plus:red:pwr";
@@ -75,7 +75,6 @@
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&sw_r_bpi_m2p>;
sw4 {
label = "power";
@@ -97,7 +96,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
- pinctrl-0 = <&wifi_en_bpi_m2p>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
@@ -114,6 +112,24 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@@ -171,23 +187,6 @@
status = "okay";
};
-&r_pio {
- pwr_led_bpi_m2p: led_pins@0 {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_bpi_m2p: key_pins@0 {
- pins = "PL3";
- function = "gpio_in";
- };
-
- wifi_en_bpi_m2p: wifi_en_pin {
- pins = "PL7";
- function = "gpio_out";
- };
-};
-
&reg_usb0_vbus {
gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 8ddd1b2cc097..0a8b79cf5954 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -45,6 +45,27 @@
/ {
model = "FriendlyArm NanoPi M1 Plus";
compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+ aliases {
+ serial1 = &uart3;
+ ethernet1 = &sdio_wifi;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
};
&ehci1 {
@@ -55,6 +76,50 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: sdio_wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
&ohci1 {
status = "okay";
};
@@ -62,3 +127,9 @@
&ohci2 {
status = "okay";
};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index ec63d104b404..3a2ccdb28afd 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -55,6 +55,12 @@
status = "okay";
};
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 8d2cc6e9a03f..78f6c24952dd 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -46,3 +46,10 @@
model = "FriendlyARM NanoPi NEO";
compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index c6decee41a27..7646e331bd29 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -81,7 +81,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sw_r_npi>;
- k1@0 {
+ k1 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -108,19 +108,19 @@
};
&pio {
- leds_npi: led_pins@0 {
+ leds_npi: led_pins {
pins = "PA10";
function = "gpio_out";
};
};
&r_pio {
- leds_r_npi: led_pins@0 {
+ leds_r_npi: led_pins {
pins = "PL10";
function = "gpio_out";
};
- sw_r_npi: key_pins@0 {
+ sw_r_npi: key_pins {
pins = "PL3";
function = "gpio_in";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 8ff71b1bb45b..b20be95b49d5 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -54,6 +54,7 @@
aliases {
serial0 = &uart0;
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet0 = &emac;
ethernet1 = &rtl8189;
};
@@ -117,6 +118,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@@ -152,24 +160,24 @@
};
&pio {
- leds_opc: led_pins@0 {
+ leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
- leds_r_opc: led_pins@0 {
+ leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
- sw_r_opc: key_pins@0 {
+ sw_r_opc: key_pins {
pins = "PL3", "PL4";
function = "gpio_in";
};
- wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
+ wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
pins = "PL7";
function = "gpio_out";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 9b47a0def740..a70a1daf4e2c 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -141,19 +141,19 @@
};
&pio {
- leds_opc: led_pins@0 {
+ leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
- leds_r_opc: led_pins@0 {
+ leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
- sw_r_opc: key_pins@0 {
+ sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 5fea430e0eb1..82e5d28cd698 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -52,6 +52,7 @@
compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -97,6 +98,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@@ -116,19 +124,19 @@
};
&pio {
- leds_opc: led_pins@0 {
+ leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
- leds_r_opc: led_pins@0 {
+ leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
- sw_r_opc: key_pins@0 {
+ sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 8b93f5c781a7..a10281b455f5 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,6 +53,11 @@
};
};
+&emac {
+ /* LEDs changed to active high on the plus */
+ /delete-property/ allwinner,leds-active-low;
+};
+
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 1a044b17d6c6..d22546df1b82 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -52,6 +52,7 @@
compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -113,6 +114,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@@ -146,19 +154,19 @@
};
&pio {
- leds_opc: led_pins@0 {
+ leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
- leds_r_opc: led_pins@0 {
+ leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
- sw_r_opc: key_pins@0 {
+ sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 828ae7a526d9..cbc499b04de4 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -47,6 +47,10 @@
model = "Xunlong Orange Pi Plus / Plus 2";
compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+ aliases {
+ ethernet0 = &emac;
+ };
+
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
@@ -74,6 +78,24 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
@@ -92,7 +114,7 @@
};
&pio {
- usb3_vbus_pin_a: usb3_vbus_pin@0 {
+ usb3_vbus_pin_a: usb3_vbus_pin {
pins = "PG11";
function = "gpio_out";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 97920b12a944..6dbf7b2e0c13 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -61,3 +61,19 @@
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..8c5efe2a9881
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Banana Pi BPI-M2-Ultra";
+ compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr-led {
+ label = "bananapi:red:pwr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user-led-green {
+ label = "bananapi:green:user";
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led-blue {
+ label = "bananapi:blue:user";
+ gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ enable-active-high;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pg_pins>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ usb2_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000000..173dcc1652d2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -0,0 +1,473 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nmi_intc: interrupt-controller@1c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun8i-r40-mmc",
+ "allwinner,sun50i-a64-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun8i-r40-mmc",
+ "allwinner,sun50i-a64-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun8i-r40-emmc",
+ "allwinner,sun50i-a64-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ pinctrl-0 = <&mmc2_pins>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc3: mmc@1c12000 {
+ compatible = "allwinner,sun8i-r40-mmc",
+ "allwinner,sun50i-a64-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbphy: phy@1c13400 {
+ compatible = "allwinner,sun8i-r40-usb-phy";
+ reg = <0x01c13400 0x14>,
+ <0x01c14800 0x4>,
+ <0x01c19800 0x4>,
+ <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb@1c19000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c19000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@1c19400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c19400 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@1c1c000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@1c1c400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun8i-r40-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,sun8i-r40-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ i2c0_pins: i2c0-pins {
+ pins = "PB0", "PB1";
+ function = "i2c0";
+ };
+
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pg_pins: mmc1-pg-pins {
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13", "PC14",
+ "PC15", "PC24";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_pb_pins: uart0-pb-pins {
+ pins = "PB22", "PB23";
+ function = "uart0";
+ };
+ };
+
+ wdt: watchdog@1c20c90 {
+ compatible = "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ uart0: serial@1c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@1c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@1c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@1c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@1c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial@1c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ uart6: serial@1c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART6>;
+ resets = <&ccu RST_BUS_UART6>;
+ status = "disabled";
+ };
+
+ uart7: serial@1c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART7>;
+ resets = <&ccu RST_BUS_UART7>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@1c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@1c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@1c2b800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b800 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@1c2c000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2c000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 3a06dc5b3746..443b083c6adc 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -178,7 +178,7 @@
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
@@ -197,7 +197,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
@@ -218,7 +218,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
@@ -237,7 +237,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -250,7 +250,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-v3s-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>;
@@ -264,7 +264,7 @@
#phy-cells = <1>;
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -273,14 +273,14 @@
#reset-cells = <1>;
};
- rtc: rtc@01c20400 {
+ rtc: rtc@1c20400 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01c20400 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-v3s-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -324,7 +324,7 @@
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -332,7 +332,7 @@
clocks = <&osc24M>;
};
- wdt0: watchdog@01c20ca0 {
+ wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -345,7 +345,7 @@
status = "disabled";
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -356,7 +356,7 @@
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -367,7 +367,7 @@
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -378,7 +378,7 @@
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -391,7 +391,7 @@
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -416,7 +416,7 @@
#size-cells = <0>;
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 000000000000..fe16fc0eb518
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Banana Pi M2 Berry";
+ compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr-led {
+ label = "bananapi:red:pwr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user-led {
+ label = "bananapi:green:user";
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ enable-active-high;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pg_pins>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 3741ac71c3d6..4024639aa005 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_cubieboard4>;
green {
label = "cubieboard4:green:usr";
@@ -76,7 +74,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
@@ -87,7 +85,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
@@ -97,7 +95,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
+ pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_cldo3>;
mmc-pwrseq = <&wifi_pwrseq>;
@@ -130,30 +128,10 @@
clocks = <&ac100_rtc 0>;
};
-&pio {
- led_pins_cubieboard4: led-pins@0 {
- pins = "PH6", "PH17";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- pins = "PH18";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_ir {
status = "okay";
};
-&r_pio {
- wifi_en_pin_cubieboard4: wifi_en_pin@0 {
- pins = "PL2";
- function = "gpio_out";
- };
-};
-
&r_rsb {
status = "okay";
@@ -427,6 +405,6 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 85f1ad670310..a9b807be99a0 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -62,11 +62,8 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
/* The LED names match those found on the board */
-
led2 {
label = "optimus:led2:usr";
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
@@ -86,8 +83,6 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_optimus>;
- regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -97,15 +92,13 @@
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_pin_optimus>;
- regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
@@ -129,7 +122,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
@@ -139,7 +132,7 @@
&mmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
+ pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_cldo3>;
mmc-pwrseq = <&wifi_pwrseq>;
@@ -180,45 +173,10 @@
clocks = <&ac100_rtc 0>;
};
-&pio {
- led_pins_optimus: led-pins@0 {
- pins = "PH0", "PH1";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
- pins = "PH18";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
- pins = "PH4";
- function = "gpio_out";
- };
-
- usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
- pins = "PH5";
- function = "gpio_out";
- };
-};
-
&r_ir {
status = "okay";
};
-&r_pio {
- led_r_pins_optimus: led-pins@1 {
- pins = "PM15";
- function = "gpio_out";
- };
-
- wifi_en_pin_optimus: wifi_en_pin@0 {
- pins = "PL2";
- function = "gpio_out";
- };
-};
-
&r_rsb {
status = "okay";
@@ -492,7 +450,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 759a72317eb8..90eac0b2a193 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton64.dtsi"
-
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun9i-a80-ccu.h>
@@ -54,6 +52,8 @@
#include <dt-bindings/reset/sun9i-a80-usb.h>
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
interrupt-parent = <&gic>;
cpus {
@@ -109,11 +109,6 @@
};
};
- memory {
- /* 8GB max. with LPAE */
- reg = <0 0x20000000 0x02 0>;
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -144,7 +139,7 @@
* would also throw all the PLL clock rates off, or just the
* downstream clocks in the PRCM.
*/
- osc24M: osc24M_clk {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -156,7 +151,7 @@
* AC100 codec/RTC chip. This serves as a placeholder for
* board dts files to specify the source.
*/
- osc32k: osc32k_clk {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -164,7 +159,7 @@
clock-output-names = "osc32k";
};
- cpus_clk: clk@08001410 {
+ cpus_clk: clk@8001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
#clock-cells = <0>;
@@ -174,7 +169,7 @@
clock-output-names = "cpus";
};
- ahbs: ahbs_clk {
+ ahbs: clk-ahbs {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -183,7 +178,7 @@
clock-output-names = "ahbs";
};
- apbs: clk@0800141c {
+ apbs: clk@800141c {
compatible = "allwinner,sun8i-a23-apb0-clk";
reg = <0x0800141c 0x4>;
#clock-cells = <0>;
@@ -191,7 +186,7 @@
clock-output-names = "apbs";
};
- apbs_gates: clk@08001428 {
+ apbs_gates: clk@8001428 {
compatible = "allwinner,sun9i-a80-apbs-gates-clk";
reg = <0x08001428 0x4>;
#clock-cells = <1>;
@@ -212,7 +207,7 @@
"apbs_i2s1", "apbs_twd";
};
- r_1wire_clk: clk@08001450 {
+ r_1wire_clk: clk@8001450 {
reg = <0x08001450 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -220,7 +215,7 @@
clock-output-names = "r_1wire";
};
- r_ir_clk: clk@08001454 {
+ r_ir_clk: clk@8001454 {
reg = <0x08001454 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -239,7 +234,7 @@
*/
ranges = <0 0 0 0x20000000>;
- ehci0: usb@00a00000 {
+ ehci0: usb@a00000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a00000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -250,7 +245,7 @@
status = "disabled";
};
- ohci0: usb@00a00400 {
+ ohci0: usb@a00400 {
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a00400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +257,7 @@
status = "disabled";
};
- usbphy1: phy@00a00800 {
+ usbphy1: phy@a00800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a00800 0x4>;
clocks = <&usb_clocks CLK_USB0_PHY>;
@@ -273,7 +268,7 @@
#phy-cells = <0>;
};
- ehci1: usb@00a01000 {
+ ehci1: usb@a01000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a01000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,7 +279,7 @@
status = "disabled";
};
- usbphy2: phy@00a01800 {
+ usbphy2: phy@a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
clocks = <&usb_clocks CLK_USB1_HSIC>,
@@ -303,7 +298,7 @@
phy_type = "hsic";
};
- ehci2: usb@00a02000 {
+ ehci2: usb@a02000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a02000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -314,7 +309,7 @@
status = "disabled";
};
- ohci2: usb@00a02400 {
+ ohci2: usb@a02400 {
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a02400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -326,7 +321,7 @@
status = "disabled";
};
- usbphy3: phy@00a02800 {
+ usbphy3: phy@a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
clocks = <&usb_clocks CLK_USB2_HSIC>,
@@ -343,7 +338,7 @@
#phy-cells = <0>;
};
- usb_clocks: clock@00a08000 {
+ usb_clocks: clock@a08000 {
compatible = "allwinner,sun9i-a80-usb-clks";
reg = <0x00a08000 0x8>;
clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
@@ -352,7 +347,7 @@
#reset-cells = <1>;
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
@@ -367,7 +362,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
@@ -382,7 +377,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
@@ -397,7 +392,7 @@
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
+ mmc3: mmc@1c12000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
@@ -412,7 +407,7 @@
#size-cells = <0>;
};
- mmc_config_clk: clk@01c13000 {
+ mmc_config_clk: clk@1c13000 {
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
clocks = <&ccu CLK_BUS_MMC>;
@@ -425,7 +420,7 @@
"mmc2_config", "mmc3_config";
};
- gic: interrupt-controller@01c41000 {
+ gic: interrupt-controller@1c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
<0x01c42000 0x2000>,
@@ -436,7 +431,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- de_clocks: clock@03000000 {
+ de_clocks: clock@3000000 {
compatible = "allwinner,sun9i-a80-de-clks";
reg = <0x03000000 0x30>;
clocks = <&ccu CLK_DE>,
@@ -450,7 +445,7 @@
#reset-cells = <1>;
};
- ccu: clock@06000000 {
+ ccu: clock@6000000 {
compatible = "allwinner,sun9i-a80-ccu";
reg = <0x06000000 0x800>;
clocks = <&osc24M>, <&osc32k>;
@@ -459,7 +454,7 @@
#reset-cells = <1>;
};
- timer@06000c00 {
+ timer@6000c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x06000c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -472,13 +467,13 @@
clocks = <&osc24M>;
};
- wdt: watchdog@06000ca0 {
+ wdt: watchdog@6000ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x06000ca0 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
- pio: pinctrl@06000800 {
+ pio: pinctrl@6000800 {
compatible = "allwinner,sun9i-a80-pinctrl";
reg = <0x06000800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -494,12 +489,12 @@
#size-cells = <0>;
#gpio-cells = <3>;
- i2c3_pins_a: i2c3@0 {
+ i2c3_pins: i2c3-pins {
pins = "PG10", "PG11";
function = "i2c3";
};
- mmc0_pins: mmc0 {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1" ,"PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -507,7 +502,7 @@
bias-pull-up;
};
- mmc1_pins: mmc1 {
+ mmc1_pins: mmc1-pins {
pins = "PG0", "PG1" ,"PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -515,7 +510,7 @@
bias-pull-up;
};
- mmc2_8bit_pins: mmc2_8bit {
+ mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@@ -525,18 +520,18 @@
bias-pull-up;
};
- uart0_pins_a: uart0@0 {
+ uart0_ph_pins: uart0-ph-pins {
pins = "PH12", "PH13";
function = "uart0";
};
- uart4_pins_a: uart4@0 {
+ uart4_pins: uart4-pins {
pins = "PG12", "PG13", "PG14", "PG15";
function = "uart4";
};
};
- uart0: serial@07000000 {
+ uart0: serial@7000000 {
compatible = "snps,dw-apb-uart";
reg = <0x07000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -547,7 +542,7 @@
status = "disabled";
};
- uart1: serial@07000400 {
+ uart1: serial@7000400 {
compatible = "snps,dw-apb-uart";
reg = <0x07000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -558,7 +553,7 @@
status = "disabled";
};
- uart2: serial@07000800 {
+ uart2: serial@7000800 {
compatible = "snps,dw-apb-uart";
reg = <0x07000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -569,7 +564,7 @@
status = "disabled";
};
- uart3: serial@07000c00 {
+ uart3: serial@7000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x07000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -580,7 +575,7 @@
status = "disabled";
};
- uart4: serial@07001000 {
+ uart4: serial@7001000 {
compatible = "snps,dw-apb-uart";
reg = <0x07001000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -591,7 +586,7 @@
status = "disabled";
};
- uart5: serial@07001400 {
+ uart5: serial@7001400 {
compatible = "snps,dw-apb-uart";
reg = <0x07001400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -602,7 +597,7 @@
status = "disabled";
};
- i2c0: i2c@07002800 {
+ i2c0: i2c@7002800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -613,7 +608,7 @@
#size-cells = <0>;
};
- i2c1: i2c@07002c00 {
+ i2c1: i2c@7002c00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -624,7 +619,7 @@
#size-cells = <0>;
};
- i2c2: i2c@07003000 {
+ i2c2: i2c@7003000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -635,7 +630,7 @@
#size-cells = <0>;
};
- i2c3: i2c@07003400 {
+ i2c3: i2c@7003400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +641,7 @@
#size-cells = <0>;
};
- i2c4: i2c@07003800 {
+ i2c4: i2c@7003800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,19 +652,19 @@
#size-cells = <0>;
};
- r_wdt: watchdog@08001000 {
+ r_wdt: watchdog@8001000 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x08001000 0x20>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
- apbs_rst: reset@080014b0 {
+ apbs_rst: reset@80014b0 {
reg = <0x080014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
- nmi_intc: interrupt-controller@080015a0 {
+ nmi_intc: interrupt-controller@80015a0 {
compatible = "allwinner,sun9i-a80-nmi";
interrupt-controller;
#interrupt-cells = <2>;
@@ -677,7 +672,7 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
- r_ir: ir@08002000 {
+ r_ir: ir@8002000 {
compatible = "allwinner,sun5i-a13-ir";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -689,7 +684,7 @@
status = "disabled";
};
- r_uart: serial@08002800 {
+ r_uart: serial@8002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -700,7 +695,7 @@
status = "disabled";
};
- r_pio: pinctrl@08002c00 {
+ r_pio: pinctrl@8002c00 {
compatible = "allwinner,sun9i-a80-r-pinctrl";
reg = <0x08002c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
@@ -713,12 +708,12 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- r_ir_pins: r_ir {
+ r_ir_pins: r-ir-pins {
pins = "PL6";
function = "s_cir_rx";
};
- r_rsb_pins: r_rsb {
+ r_rsb_pins: r-rsb-pins {
pins = "PN0", "PN1";
function = "s_rsb";
drive-strength = <20>;
@@ -726,7 +721,7 @@
};
};
- r_rsb: i2c@08003400 {
+ r_rsb: i2c@8003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c2..8d40c00d64bb 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -91,7 +91,7 @@
reg = <0x01c00000 0x1000>;
};
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -100,7 +100,7 @@
#dma-cells = <1>;
};
- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c0f000 0x1000>;
resets = <&ccu RST_BUS_MMC0>;
@@ -111,7 +111,7 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c10000 0x1000>;
resets = <&ccu RST_BUS_MMC1>;
@@ -122,7 +122,7 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c11000 0x1000>;
resets = <&ccu RST_BUS_MMC2>;
@@ -133,7 +133,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -146,7 +146,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>,
@@ -178,7 +178,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -187,7 +187,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -197,7 +197,7 @@
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -208,7 +208,7 @@
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,7 +220,7 @@
status = "disabled";
};
- ehci2: usb@01c1c000 {
+ ehci2: usb@1c1c000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -231,7 +231,7 @@
status = "disabled";
};
- ohci2: usb@01c1c400 {
+ ohci2: usb@1c1c400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -243,7 +243,7 @@
status = "disabled";
};
- ehci3: usb@01c1d000 {
+ ehci3: usb@1c1d000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1d000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
@@ -254,7 +254,7 @@
status = "disabled";
};
- ohci3: usb@01c1d400 {
+ ohci3: usb@1c1d400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1d400 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -266,7 +266,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -275,7 +275,7 @@
#reset-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -310,7 +310,7 @@
function = "i2c2";
};
- mmc0_pins_a: mmc0@0 {
+ mmc0_pins_a: mmc0 {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -318,13 +318,13 @@
bias-pull-up;
};
- mmc0_cd_pin: mmc0_cd_pin@0 {
+ mmc0_cd_pin: mmc0_cd_pin {
pins = "PF6";
function = "gpio_in";
bias-pull-up;
};
- mmc1_pins_a: mmc1@0 {
+ mmc1_pins_a: mmc1 {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -342,7 +342,7 @@
bias-pull-up;
};
- spdif_tx_pins_a: spdif@0 {
+ spdif_tx_pins_a: spdif {
pins = "PA17";
function = "spdif";
};
@@ -357,7 +357,7 @@
function = "spi1";
};
- uart0_pins_a: uart0@0 {
+ uart0_pins_a: uart0 {
pins = "PA4", "PA5";
function = "uart0";
};
@@ -381,9 +381,14 @@
pins = "PA13", "PA14";
function = "uart3";
};
+
+ uart3_rts_cts_pins: uart3_rts_cts {
+ pins = "PA15", "PA16";
+ function = "uart3";
+ };
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -391,7 +396,56 @@
clocks = <&osc24M>;
};
- spi0: spi@01c68000 {
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio>;
+ /* Only one MDIO is usable at the time */
+ internal_mdio: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+
+ external_mdio: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -407,7 +461,7 @@
#size-cells = <0>;
};
- spi1: spi@01c69000 {
+ spi1: spi@1c69000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -423,13 +477,13 @@
#size-cells = <0>;
};
- wdt0: watchdog@01c20ca0 {
+ wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
@@ -442,7 +496,7 @@
status = "disabled";
};
- pwm: pwm@01c21400 {
+ pwm: pwm@1c21400 {
compatible = "allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x8>;
clocks = <&osc24M>;
@@ -450,7 +504,33 @@
status = "disabled";
};
- codec: codec@01c22c00 {
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ resets = <&ccu RST_BUS_I2S0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
reg = <0x01c22c00 0x400>;
@@ -464,7 +544,7 @@
status = "disabled";
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -477,7 +557,7 @@
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +570,7 @@
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -503,7 +583,7 @@
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -516,7 +596,7 @@
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -529,7 +609,7 @@
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -542,9 +622,9 @@
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
+ reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
@@ -555,7 +635,7 @@
#size-cells = <0>;
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
@@ -566,7 +646,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- rtc: rtc@01f00000 {
+ rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -583,12 +663,12 @@
#reset-cells = <1>;
};
- codec_analog: codec-analog@01f015c0 {
+ codec_analog: codec-analog@1f015c0 {
compatible = "allwinner,sun8i-h3-codec-analog";
reg = <0x01f015c0 0x4>;
};
- ir: ir@01f02000 {
+ ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
@@ -598,7 +678,7 @@
status = "disabled";
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -609,7 +689,7 @@
interrupt-controller;
#interrupt-cells = <3>;
- ir_pins_a: ir@0 {
+ ir_pins_a: ir {
pins = "PL11";
function = "s_cir_rx";
};
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
index 2565d5137a17..ddf4e722ea93 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -65,8 +65,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -75,8 +73,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
index 12ab6e0c0331..0ec1b0a317b4 100644
--- a/arch/arm/boot/dts/tango4-common.dtsi
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -160,7 +160,7 @@
#address-cells = <1>;
#size-cells = <1>;
- irq0: irq0@000 {
+ irq0: irq0@0 {
reg = <0x000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index e8e777b8ef1b..d112f85e66ed 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -68,6 +68,10 @@
};
};
+ cec@70015000 {
+ status = "okay";
+ };
+
gpu@0,57000000 {
/*
* Node left disabled on purpose - the bootloader will enable
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index a7e43dcbf744..174092bfac90 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -125,7 +125,7 @@
nvidia,head = <1>;
};
- hdmi@54280000 {
+ hdmi: hdmi@54280000 {
compatible = "nvidia,tegra124-hdmi";
reg = <0x0 0x54280000 0x0 0x00040000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -853,6 +853,16 @@
status = "disabled";
};
+ cec@70015000 {
+ compatible = "nvidia,tegra124-cec";
+ reg = <0x0 0x70015000 0x0 0x00001000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_CEC>;
+ clock-names = "cec";
+ status = "disabled";
+ hdmi-phandle = <&hdmi>;
+ };
+
soctherm: thermal-sensor@700e2000 {
compatible = "nvidia,tegra124-soctherm";
reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index b3aaab354f3e..0056852c4fb0 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -38,7 +38,7 @@
};
&ethsc {
- interrupts = <0 49 4>;
+ interrupts = <1 8>;
};
&serial0 {
@@ -53,6 +53,14 @@
status = "okay";
};
+&gpio {
+ xirq1 {
+ gpio-hog;
+ gpios = <121 0>;
+ input;
+ };
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 93586faf950f..01fc3e16e2bd 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -37,7 +37,7 @@
clock-frequency = <24576000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
@@ -71,6 +71,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -81,6 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -91,6 +93,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -101,6 +104,21 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <136>;
+ socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
@@ -113,6 +131,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -126,6 +145,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -139,6 +159,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -152,6 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -305,6 +327,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 2188d114d79b..0e510a725976 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -40,7 +40,7 @@
};
&ethsc {
- interrupts = <0 52 4>;
+ interrupts = <4 8>;
};
&serial0 {
@@ -55,6 +55,14 @@
status = "okay";
};
+&gpio {
+ xirq4 {
+ gpio-hog;
+ gpios = <124 0>;
+ input;
+ };
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index be82cddc4072..de481c372467 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -8,117 +8,117 @@
*/
&pinctrl {
- pinctrl_aout: aout_grp {
+ pinctrl_aout: aout {
groups = "aout";
function = "aout";
};
- pinctrl_emmc: emmc_grp {
+ pinctrl_emmc: emmc {
groups = "emmc", "emmc_dat8";
function = "emmc";
};
- pinctrl_ether_mii: ether_mii_grp {
+ pinctrl_ether_mii: ether-mii {
groups = "ether_mii";
function = "ether_mii";
};
- pinctrl_ether_rgmii: ether_rgmii_grp {
+ pinctrl_ether_rgmii: ether-rgmii {
groups = "ether_rgmii";
function = "ether_rgmii";
};
- pinctrl_ether_rmii: ether_rmii_grp {
+ pinctrl_ether_rmii: ether-rmii {
groups = "ether_rmii";
function = "ether_rmii";
};
- pinctrl_i2c0: i2c0_grp {
+ pinctrl_i2c0: i2c0 {
groups = "i2c0";
function = "i2c0";
};
- pinctrl_i2c1: i2c1_grp {
+ pinctrl_i2c1: i2c1 {
groups = "i2c1";
function = "i2c1";
};
- pinctrl_i2c2: i2c2_grp {
+ pinctrl_i2c2: i2c2 {
groups = "i2c2";
function = "i2c2";
};
- pinctrl_i2c3: i2c3_grp {
+ pinctrl_i2c3: i2c3 {
groups = "i2c3";
function = "i2c3";
};
- pinctrl_i2c4: i2c4_grp {
+ pinctrl_i2c4: i2c4 {
groups = "i2c4";
function = "i2c4";
};
- pinctrl_nand: nand_grp {
+ pinctrl_nand: nand {
groups = "nand";
function = "nand";
};
- pinctrl_nand2cs: nand2cs_grp {
+ pinctrl_nand2cs: nand2cs {
groups = "nand", "nand_cs1";
function = "nand";
};
- pinctrl_sd: sd_grp {
+ pinctrl_sd: sd {
groups = "sd";
function = "sd";
};
- pinctrl_sd1: sd1_grp {
+ pinctrl_sd1: sd1 {
groups = "sd1";
function = "sd1";
};
- pinctrl_system_bus: system_bus_grp {
+ pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
};
- pinctrl_uart0: uart0_grp {
+ pinctrl_uart0: uart0 {
groups = "uart0";
function = "uart0";
};
- pinctrl_uart1: uart1_grp {
+ pinctrl_uart1: uart1 {
groups = "uart1";
function = "uart1";
};
- pinctrl_uart2: uart2_grp {
+ pinctrl_uart2: uart2 {
groups = "uart2";
function = "uart2";
};
- pinctrl_uart3: uart3_grp {
+ pinctrl_uart3: uart3 {
groups = "uart3";
function = "uart3";
};
- pinctrl_usb0: usb0_grp {
+ pinctrl_usb0: usb0 {
groups = "usb0";
function = "usb0";
};
- pinctrl_usb1: usb1_grp {
+ pinctrl_usb1: usb1 {
groups = "usb1";
function = "usb1";
};
- pinctrl_usb2: usb2_grp {
+ pinctrl_usb2: usb2 {
groups = "usb2";
function = "usb2";
};
- pinctrl_usb3: usb3_grp {
+ pinctrl_usb3: usb3 {
groups = "usb3";
function = "usb3";
};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 903df6348e77..be99467ac6bb 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -40,7 +40,7 @@
};
&ethsc {
- interrupts = <0 50 4>;
+ interrupts = <2 8>;
};
&serial0 {
@@ -55,6 +55,14 @@
status = "okay";
};
+&gpio {
+ xirq2 {
+ gpio-hog;
+ gpios = <122 0>;
+ input;
+ };
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 2a9bd7f9f5db..7955c3a49e65 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -45,7 +45,7 @@
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
@@ -79,6 +79,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -89,6 +90,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -99,6 +101,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -109,6 +112,21 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <248>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
};
i2c0: i2c@58780000 {
@@ -121,6 +139,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -134,6 +153,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -147,6 +167,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -160,6 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -173,6 +195,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -184,6 +207,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -324,6 +348,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index b026bcd42a06..6589b8a2c65c 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -37,7 +37,7 @@
};
};
- cpu_opp: opp_table {
+ cpu_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -119,7 +119,7 @@
clock-frequency = <20000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
@@ -166,6 +166,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -176,6 +177,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -186,6 +188,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -196,6 +199,21 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <248>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
};
i2c0: i2c@58780000 {
@@ -208,6 +226,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -221,6 +240,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -234,6 +254,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -247,6 +268,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -260,6 +282,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -271,6 +294,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -385,6 +409,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 90b020c95083..d82d6d872131 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -7,6 +7,8 @@
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "socionext,uniphier-pxs2";
#address-cells = <1>;
@@ -16,7 +18,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
@@ -24,9 +26,10 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -36,7 +39,7 @@
operating-points-v2 = <&cpu_opp>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
@@ -46,7 +49,7 @@
operating-points-v2 = <&cpu_opp>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -57,7 +60,7 @@
};
};
- cpu_opp: opp_table {
+ cpu_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -107,13 +110,42 @@
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu-crit {
+ temperature = <95000>; /* 95C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu-alert {
+ temperature = <85000>; /* 85C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -141,6 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -151,6 +184,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -161,6 +195,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -171,6 +206,24 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 96 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1";
+ ngpios = <232>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+ <21 217 3>;
};
i2c0: i2c@58780000 {
@@ -183,6 +236,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -196,6 +250,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -209,6 +264,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -222,6 +278,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -233,6 +290,7 @@
#size-cells = <0>;
interrupts = <0 45 4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <400000>;
};
@@ -244,6 +302,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -255,6 +314,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -358,6 +418,13 @@
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-pxs2-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ socionext,tmod-calibration = <0x0f86 0x6844>;
+ };
};
nand: nand@68000000 {
@@ -369,6 +436,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 5accd3cc76e4..1c0e7077a560 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -38,7 +38,7 @@
};
&ethsc {
- interrupts = <0 48 4>;
+ interrupts = <0 8>;
};
&serial0 {
@@ -53,6 +53,14 @@
status = "okay";
};
+&gpio {
+ xirq0 {
+ gpio-hog;
+ gpios = <120 0>;
+ input;
+ };
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index ebd0c3f63e7f..71885366cd23 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -37,7 +37,7 @@
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
@@ -71,6 +71,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -81,6 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -91,6 +93,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -101,6 +104,25 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 104 0 0>,
+ <&pinctrl 112 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1",
+ "gpio_range2";
+ ngpios = <136>;
+ socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
@@ -113,6 +135,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -126,6 +149,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -139,6 +163,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -152,6 +177,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -305,6 +331,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index 6c825f192e65..e4e7e1bb9172 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -11,11 +11,12 @@
status = "okay";
ranges = <1 0x00000000 0x42000000 0x02000000>;
- support_card: support_card@1,1f00000 {
+ support_card: support-card@1,1f00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 1 0x01f00000 0x00100000>;
+ interrupt-parent = <&gpio>;
ethsc: ethernet@0 {
compatible = "smsc,lan9118", "smsc,lan9115";
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 482381c1c962..7b1125be99c4 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -128,7 +128,7 @@
};
};
- usb0: ohci@00a00000 {
+ usb0: ohci@a00000 {
num-ports = <2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 088c2c3685ab..81c3fe0465d9 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -20,8 +20,8 @@
};
i2c-gpio-0 {
- rv3029c2@56 {
- compatible = "rv3029c2";
+ rtc@56 {
+ compatible = "microcrystal,rv3029";
reg = <0x56>;
};
};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 53e3b8b250c6..6f787e67bd2e 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -198,7 +198,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- codec: sgtl5000@0a {
+ codec: sgtl5000@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0x0a>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index db3b408ea55a..02a6227c717c 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -359,7 +359,7 @@
};
&i2c1 {
- at24mac602@00 {
+ at24mac602@0 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index 752d28e0f9b0..8a74efdb6360 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -38,7 +38,7 @@
reg = <0x00400000 0x1000>;
};
- intc: interrupt-controller@00801000 {
+ intc: interrupt-controller@801000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
@@ -48,7 +48,7 @@
<0x00800100 0x100>;
};
- global_timer: timer@008000200 {
+ global_timer: timer@8000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x00800200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 34e8277fce0d..70a5de76b7db 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -152,7 +152,7 @@
#size-cells = <0>;
reg = <2>;
eeprom@54 {
- compatible = "at,24c08";
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 7ebc8c5ae39d..cdc326ec3335 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -108,7 +108,7 @@
#size-cells = <0>;
reg = <2>;
eeprom@54 {
- compatible = "at,24c08";
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};