ARM: ux500: move I2C pin control to the device tree

This moves the static, device-tied pin control configuration
out of the board file board-mop500-pins.c and into the device
tree. Define possible states also for I2C4 even if it's not
used by any board file at this time.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 150 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index d979de27b6e1..d2e63f3fb687 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -109,6 +109,111 @@
 					};
 				};
 			};
+
+			/* Settings for all I2C default and sleep states */
+			i2c0 {
+				i2c0_default_mode: i2c_default {
+					default_mux {
+						ste,function = "i2c0";
+						ste,pins = "i2c0_a_1";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c0_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c1 {
+				i2c1_default_mode: i2c_default {
+					default_mux {
+						ste,function = "i2c1";
+						ste,pins = "i2c1_b_2";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c1_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c2 {
+				i2c2_default_mode: i2c_default {
+					default_mux {
+						ste,function = "i2c2";
+						ste,pins = "i2c2_b_2";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c2_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c3 {
+				i2c3_default_mode: i2c_default {
+					default_mux {
+						ste,function = "i2c3";
+						ste,pins = "i2c3_c_2";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c3_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			/*
+			 * Activating I2C4 will conflict with UART1 about the same pins so do not
+			 * enable I2C4 and UART1 at the same time.
+			 */
+			i2c4 {
+				i2c4_default_mode: i2c_default {
+					default_mux {
+						ste,function = "i2c4";
+						ste,pins = "i2c4_b_1";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c4_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 914a5f4399e5..1863241c911e 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -51,7 +51,22 @@
 			status = "okay";
 		};
 
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
 		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
 			lp5521@33 {
 				compatible = "national,lp5521";
 				reg = <0x33>;
@@ -95,6 +110,12 @@
 			};
 		};
 
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_default_mode>;
+			pinctrl-1 = <&i2c3_sleep_mode>;
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 16d28863ef6e..f8df43e0791d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -176,6 +176,30 @@
 			status = "okay";
 		};
 
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+		};
+
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_default_mode>;
+			pinctrl-1 = <&i2c3_sleep_mode>;
+		};
+
 		cpufreq-cooling {
 			status = "okay";
 		};