Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

7 files changed, 1179 insertions, 31 deletions

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 399d17b231d2..49945cc1bc7d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -23,4 +23,52 @@
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dfc433599436..5ca0cdb76413 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -23,11 +23,11 @@
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
 	};
 
 	watchdog {
@@ -42,30 +42,6 @@
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +70,64 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +149,13 @@
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +234,12 @@
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +386,19 @@
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};
 
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 000000000000..8314e4171884
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,292 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@5cd00000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 000000000000..9e61da404d57
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 000000000000..0d8472e5ab9f
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,308 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 000000000000..a26fc47a55e8
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 000000000000..1f8e1e1481df
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,262 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi@e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};