arm/versatile: Add device tree support

For testing the dt work, define a dt-enabled versatile platform.

This patch adds a new versatile platform for when using the device
tree.  Add platform and amba devices are discovered and registered by
parsing the device tree.  Clocks and initial io mappings are still
configured statically.

This patch still depends on some static platform_data for a few devices
which is passed via the auxdata structure to of_platform_populate(),
but it is a viable starting point until the drivers can get all
configuration data out of the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2 files changed, 240 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
new file mode 100644
index 000000000000..0b32925f2147
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -0,0 +1,192 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	memory {
+		reg = <0x0 0x08000000>;
+	};
+
+	flash@34000000 {
+		compatible = "arm,versatile-flash";
+		reg = <0x34000000 0x4000000>;
+		bank-width = <4>;
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: intc@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+		};
+
+		sic: intc@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+		};
+
+		uart0: uart@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+		};
+
+		uart1: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+		};
+
+		uart2: uart@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+		};
+
+		ssp@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+			};
+			mmc@5000 {
+				compatible = "arm,primecell";
+				reg = < 0x5000 0x1000>;
+				interrupts = <22>;
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
new file mode 100644
index 000000000000..8a614e398004
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -0,0 +1,48 @@
+/include/ "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile PB";
+	compatible = "arm,versatile-pb";
+
+	amba {
+		gpio2: gpio@101e6000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e6000 0x1000>;
+			interrupts = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@101e7000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e7000 0x1000>;
+			interrupts = <9>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		fpga {
+			uart@9000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x9000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+			};
+			sci@a000 {
+				compatible = "arm,primecell";
+				reg = <0xa000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <5>;
+			};
+			mmc@b000 {
+				compatible = "arm,primecell";
+				reg = <0xb000 0x1000>;
+				interrupts = <23>;
+			};
+		};
+	};
+};