ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback

The kernel already has the responsibility to handle resources such as the

CCI when hotplugging CPUs, during the booting of secondary CPUs, and when
resuming from suspend/idle.  It would be more coherent and less confusing
if the CCI for the boot CPU (or cluster)  was also initialized by the
kernel rather than expecting the firmware/bootloader to do it and only in
that case. After all, the kernel has all the necessary code already and
the bootloader shouldn't have to care at all.

The CCI may be turned on only when the cache is off. Leveraging the CPU
suspend code to loop back through the low-level MCPM entry point is all
that is needed to properly turn on the CCI from the kernel by using the
same code as during secondary boot.

Let's provide a generic MCPM loopback function that can be invoked by
backend initialization code to set things (CCI or similar) on the boot
CPU just as it is done for the other CPUs.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 52 insertions, 0 deletions

diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index f91136ab447e..3c165fc2dce2 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -12,11 +12,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
+#include <linux/cpu_pm.h>
 
 #include <asm/mcpm.h>
 #include <asm/cacheflush.h>
 #include <asm/idmap.h>
 #include <asm/cputype.h>
+#include <asm/suspend.h>
 
 extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
 
@@ -146,6 +148,56 @@ int mcpm_cpu_powered_up(void)
 	return 0;
 }
 
+#ifdef CONFIG_ARM_CPU_SUSPEND
+
+static int __init nocache_trampoline(unsigned long _arg)
+{
+	void (*cache_disable)(void) = (void *)_arg;
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	phys_reset_t phys_reset;
+
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	setup_mm_for_reboot();
+
+	__mcpm_cpu_going_down(cpu, cluster);
+	BUG_ON(!__mcpm_outbound_enter_critical(cpu, cluster));
+	cache_disable();
+	__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	__mcpm_cpu_down(cpu, cluster);
+
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset(virt_to_phys(mcpm_entry_point));
+	BUG();
+}
+
+int __init mcpm_loopback(void (*cache_disable)(void))
+{
+	int ret;
+
+	/*
+	 * We're going to soft-restart the current CPU through the
+	 * low-level MCPM code by leveraging the suspend/resume
+	 * infrastructure. Let's play it safe by using cpu_pm_enter()
+	 * in case the CPU init code path resets the VFP or similar.
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	ret = cpu_pm_enter();
+	if (!ret) {
+		ret = cpu_suspend((unsigned long)cache_disable, nocache_trampoline);
+		cpu_pm_exit();
+	}
+	local_fiq_enable();
+	local_irq_enable();
+	if (ret)
+		pr_err("%s returned %d\n", __func__, ret);
+	return ret;
+}
+
+#endif
+
 struct sync_struct mcpm_sync;
 
 /*