[ARM] 3180/1: Update Zaurus defconfigs

Patch from Richard Purdie

This updates the Zaurus defconfigs. Poodle gets merged into
corgi_defconfig and support for tosa and akita is enabled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 62 insertions, 19 deletions

diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 900e04f8e38c..18e9beaec465 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct  9 17:11:19 2005
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:26:52 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -64,6 +64,23 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 # CONFIG_PXA_SHARPSL_25x is not set
 CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
 CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
 CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
 CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
 
 #
 # Processor Type
@@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -411,6 +441,7 @@ CONFIG_IRCOMM=m
 # CONFIG_SMC_IRCC_FIR is not set
 # CONFIG_ALI_FIR is not set
 # CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -457,6 +487,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -530,6 +566,11 @@ CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -771,6 +806,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
 
 #
 # Input Device Drivers
@@ -848,11 +884,15 @@ CONFIG_UNIX98_PTYS=y
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -891,14 +931,13 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -907,6 +946,7 @@ CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -965,15 +1005,15 @@ CONFIG_USB_SL811_CS=m
 #
 # USB Device Class drivers
 #
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
 
 #
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -985,7 +1025,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1058,6 +1097,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1218,6 +1258,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1344,7 +1385,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y