ARM: 8611/1: l2x0: add PMU support

The L2C-220 (AKA L220) and L2C-310 (AKA PL310) cache controllers feature
a Performance Monitoring Unit (PMU), which can be useful for tuning
and/or debugging. This hardware is always present and the relevant
registers are accessible to non-secure accesses. Thus, no special
firmware interface is necessary.

This patch adds support for the PMU, plugging into the usual perf
infrastructure. The overflow interrupt is not always available (e.g. on
RealView PBX A9 it is not wired up at all), and the hardware counters
saturate, so the driver does not make use of this. Instead, the driver
periodically polls and reset counters as required to avoid losing
events due to saturation.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 19 insertions, 0 deletions

diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 3a5ec1c25659..736292b42fca 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -87,6 +87,15 @@
 #define L310_CACHE_ID_RTL_R3P2		0x08
 #define L310_CACHE_ID_RTL_R3P3		0x09
 
+#define L2X0_EVENT_CNT_CTRL_ENABLE	BIT(0)
+
+#define L2X0_EVENT_CNT_CFG_SRC_SHIFT	2
+#define L2X0_EVENT_CNT_CFG_SRC_MASK	0xf
+#define L2X0_EVENT_CNT_CFG_SRC_DISABLED	0
+#define L2X0_EVENT_CNT_CFG_INT_DISABLED	0
+#define L2X0_EVENT_CNT_CFG_INT_INCR	1
+#define L2X0_EVENT_CNT_CFG_INT_OVERFLOW	2
+
 /* L2C auxiliary control register - bits common to L2C-210/220/310 */
 #define L2C_AUX_CTRL_WAY_SIZE_SHIFT		17
 #define L2C_AUX_CTRL_WAY_SIZE_MASK		(7 << 17)
@@ -157,6 +166,16 @@ static inline int l2x0_of_init(u32 aux_val, u32 aux_mask)
 }
 #endif
 
+#ifdef CONFIG_CACHE_L2X0_PMU
+void l2x0_pmu_register(void __iomem *base, u32 part);
+void l2x0_pmu_suspend(void);
+void l2x0_pmu_resume(void);
+#else
+static inline void l2x0_pmu_register(void __iomem *base, u32 part) {}
+static inline void l2x0_pmu_suspend(void) {}
+static inline void l2x0_pmu_resume(void) {}
+#endif
+
 struct l2x0_regs {
 	unsigned long phy_base;
 	unsigned long aux_ctrl;