ARM: perf: separate PMU backends into multiple files

The ARM perf_event.c file contains all PMU backends and, as new PMUs
are introduced, will continue to grow.

This patch follows the example of x86 and splits the PMU implementations
into separate files which are then #included back into the main
file. Compile-time guards are added to each PMU file to avoid compiling
in code that is not relevant for the version of the architecture which
we are targetting.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

1 files changed, 5 insertions, 2352 deletions

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index ac4e9a1ed80b..421a4bb88fed 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -4,9 +4,7 @@
  * ARM performance counter support.
  *
  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
  *
  * This code is based on the sparc64 perf event code, which is in turn based
  * on the x86 code. Callchain code is based on the ARM OProfile backtrace
@@ -606,2355 +604,10 @@ static struct pmu pmu = {
 	.read		= armpmu_read,
 };
 
-/*
- * ARMv6 Performance counter handling code.
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
- *	  effectively stops the counter from counting.
- *	- disable the counter's interrupt generation (each counter has it's
- *	  own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- *	- enable the counter's interrupt generation.
- *	- set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-enum armv6_perf_types {
-	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
-	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
-	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
-	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
-	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
-	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
-	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
-	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
-	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
-	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
-	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
-	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
-	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
-	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
-	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
-	ARMV6_PERFCTR_NOP		    = 0x20,
-};
-
-enum armv6_counters {
-	ARMV6_CYCLE_COUNTER = 1,
-	ARMV6_COUNTER0,
-	ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
-	u32 val;
-	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
-	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE		(1 << 0)
-#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
-#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
-#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
-	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
-	 ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
-	return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
-				  enum armv6_counters counter)
-{
-	int ret = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
-	else if (ARMV6_COUNTER0 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
-	else if (ARMV6_COUNTER1 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
-	unsigned long value = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
-		       u32 value)
-{
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
-		      int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= 0;
-		evt	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
-			  ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
-			  ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the event
-	 * that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
-		    void *dev)
-{
-	unsigned long pmcr = armv6_pmcr_read();
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	if (!armv6_pmcr_has_overflowed(pmcr))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	/*
-	 * The interrupts are cleared by writing the overflow flags back to
-	 * the control register. All of the other bits don't have any effect
-	 * if they are rewritten, so write the whole value back.
-	 */
-	armv6_pmcr_write(pmcr);
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val |= ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
-		       struct hw_perf_event *event)
-{
-	/* Always place a cycle counter into the cycle counter. */
-	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
-		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV6_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * counter0 and counter1.
-		 */
-		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
-			return ARMV6_COUNTER1;
-		}
-
-		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
-			return ARMV6_COUNTER0;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
-		       int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-		evt	= 0;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the number
-	 * of ETM bus signal assertion cycles. The external reporting should
-	 * be disabled and so this should never increment.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
-			      int idx)
-{
-	unsigned long val, mask, flags, evt = 0;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static const struct arm_pmu armv6pmu = {
-	.id			= ARM_PERF_PMU_ID_V6,
-	.name			= "v6",
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6pmu_disable_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.cache_map		= &armv6_perf_cache_map,
-	.event_map		= &armv6_perf_map,
-	.raw_event_mask		= 0xFF,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-const struct arm_pmu *__init armv6pmu_init(void)
-{
-	return &armv6pmu;
-}
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-static const struct arm_pmu armv6mpcore_pmu = {
-	.id			= ARM_PERF_PMU_ID_V6MP,
-	.name			= "v6mpcore",
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6mpcore_pmu_disable_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.cache_map		= &armv6mpcore_perf_cache_map,
-	.event_map		= &armv6mpcore_perf_map,
-	.raw_event_mask		= 0xFF,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-const struct arm_pmu *__init armv6mpcore_pmu_init(void)
-{
-	return &armv6mpcore_pmu;
-}
-
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * Copied from ARMv6 code, with the low level code inspired
- *  by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- *  a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- *  a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- *  counter and all 4 performance counters together can be reset separately.
- */
-
-/* Common ARMv7 event types */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
-	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
-	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
-	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
-	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
-	ARMV7_PERFCTR_DREAD			= 0x06,
-	ARMV7_PERFCTR_DWRITE			= 0x07,
-
-	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
-	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
-
-	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
-
-	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
-
-	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
-
-	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
-	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
-	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
-	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
-	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
-	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
-	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
-	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
-	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
-	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
-	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
-	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
-	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
-	ARMV7_PERFCTR_L2_NEON			= 0x4E,
-	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
-	ARMV7_PERFCTR_L1_INST			= 0x50,
-	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
-	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
-	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
-	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
-	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
-	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
-	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
-	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
-	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
-	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
-
-	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
-	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
-	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
-	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
-	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
-
-	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
-	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
-
-	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
-	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
-	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
-	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
-	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
-	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
-	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
-	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
-	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
-
-	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
-
-	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
-	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
-	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
-	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
-	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
-
-	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
-	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
-	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
-	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
-	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
-	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES 	= 0x85,
-	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
-
-	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
-	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
-
-	ARMV7_PERFCTR_ISB_INST			= 0x90,
-	ARMV7_PERFCTR_DSB_INST			= 0x91,
-	ARMV7_PERFCTR_DMB_INST			= 0x92,
-	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
-
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
-	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
-	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
-	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
-	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    =
-					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Perf Events counters
- */
-enum armv7_counters {
-	ARMV7_CYCLE_COUNTER 		= 1,	/* Cycle counter */
-	ARMV7_COUNTER0			= 2,	/* First event counter */
-};
-
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV7_PMNC_N_MASK	0x1f
-#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define ARMV7_CNT0 		0	/* First event counter */
-#define ARMV7_CCNT 		31	/* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
-#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
-
-static inline unsigned long armv7_pmnc_read(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void armv7_pmnc_write(unsigned long val)
-{
-	val &= ARMV7_PMNC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
-{
-	return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum armv7_counters counter)
-{
-	int ret = 0;
-
-	if (counter == ARMV7_CYCLE_COUNTER)
-		ret = pmnc & ARMV7_FLAG_C;
-	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
-		ret = pmnc & ARMV7_FLAG_P(counter);
-	else
-		pr_err("CPU%u checking wrong counter %d overflow status\n",
-			smp_processor_id(), counter);
-
-	return ret;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
-		pr_err("CPU%u selecting wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
-	unsigned long value = 0;
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mrc p15, 0, %0, c9, c13, 2"
-				     : "=r" (value));
-	} else
-		pr_err("CPU%u reading wrong counter %d\n",
-			smp_processor_id(), idx);
-
-	return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mcr p15, 0, %0, c9, c13, 2"
-				     : : "r" (value));
-	} else
-		pr_err("CPU%u writing wrong counter %d\n",
-			smp_processor_id(), idx);
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
-{
-	if (armv7_pmnc_select_counter(idx) == idx) {
-		val &= ARMV7_EVTSEL_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENS_C;
-	else
-		val = ARMV7_CNTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
-{
-	u32 val;
-
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENC_C;
-	else
-		val = ARMV7_CNTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENS_C;
-	else
-		val = ARMV7_INTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENC_C;
-	else
-		val = ARMV7_INTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= ARMV7_FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-	}
-}
-#endif
-
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We don't need to set the event if it's a cycle count
-	 */
-	if (idx != ARMV7_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv7_pmnc_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	armv7_pmnc_enable_counter(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv7_pmnc_disable_intens(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmnc = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv7_pmnc_has_overflowed(pmnc))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Enable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Disable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
-				  struct hw_perf_event *event)
-{
-	int idx;
-
-	/* Always place a cycle counter into the cycle counter. */
-	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
-		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV7_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * the events counters
-		 */
-		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
-			if (!test_and_set_bit(idx, cpuc->used_mask))
-				return idx;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static struct arm_pmu armv7pmu = {
-	.handle_irq		= armv7pmu_handle_irq,
-	.enable			= armv7pmu_enable_event,
-	.disable		= armv7pmu_disable_event,
-	.read_counter		= armv7pmu_read_counter,
-	.write_counter		= armv7pmu_write_counter,
-	.get_event_idx		= armv7pmu_get_event_idx,
-	.start			= armv7pmu_start,
-	.stop			= armv7pmu_stop,
-	.raw_event_mask		= 0xFF,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_reset_read_pmnc(void)
-{
-	u32 nb_cnt;
-
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
-	/* Add the CPU cycles counter and return */
-	return nb_cnt + 1;
-}
-
-const struct arm_pmu *__init armv7_a8_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA8;
-	armv7pmu.name		= "ARMv7 Cortex-A8";
-	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
-	armv7pmu.event_map	= &armv7_a8_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
-	return &armv7pmu;
-}
-
-const struct arm_pmu *__init armv7_a9_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA9;
-	armv7pmu.name		= "ARMv7 Cortex-A9";
-	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
-	armv7pmu.event_map	= &armv7_a9_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
-	return &armv7pmu;
-}
-
-
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Based on xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * 	- xscale1pmu: 2 event counters and a cycle counter
- * 	- xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-enum xscale_perf_types {
-	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
-	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
-	XSCALE_PERFCTR_DATA_STALL		= 0x02,
-	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
-	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
-	XSCALE_PERFCTR_BRANCH			= 0x05,
-	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
-	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
-	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
-	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
-	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
-	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
-	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
-	XSCALE_PERFCTR_BCU_FULL			= 0x11,
-	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
-	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
-	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
-	XSCALE_PERFCTR_RMW			= 0x16,
-	/* XSCALE_PERFCTR_CCNT is not hardware defined */
-	XSCALE_PERFCTR_CCNT			= 0xFE,
-	XSCALE_PERFCTR_UNUSED			= 0xFF,
-};
-
-enum xscale_counters {
-	XSCALE_CYCLE_COUNTER	= 1,
-	XSCALE_COUNTER0,
-	XSCALE_COUNTER1,
-	XSCALE_COUNTER2,
-	XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					   [PERF_COUNT_HW_CACHE_OP_MAX]
-					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-#define	XSCALE_PMU_ENABLE	0x001
-#define XSCALE_PMN_RESET	0x002
-#define	XSCALE_CCNT_RESET	0x004
-#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64	0x008
-
-#define XSCALE1_OVERFLOWED_MASK	0x700
-#define XSCALE1_CCOUNT_OVERFLOW	0x400
-#define XSCALE1_COUNT0_OVERFLOW	0x100
-#define XSCALE1_COUNT1_OVERFLOW	0x200
-#define XSCALE1_CCOUNT_INT_EN	0x040
-#define XSCALE1_COUNT0_INT_EN	0x010
-#define XSCALE1_COUNT1_INT_EN	0x020
-#define XSCALE1_COUNT0_EVT_SHFT	12
-#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT	20
-#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0xffff77f;
-	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * NOTE: there's an A stepping erratum that states if an overflow
-	 *       bit already exists and another occurs, the previous
-	 *       Overflow bit gets cleared. There's no workaround.
-	 *	 Fixed in B stepping or later.
-	 */
-	pmnc = xscale1pmu_read_pmnc();
-
-	/*
-	 * Write the value back to clear the overflow flags. Overflow
-	 * flags remain in pmnc for use below. We also disable the PMU
-	 * while we process the interrupt.
-	 */
-	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = 0;
-		evt = XSCALE1_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
-			XSCALE1_COUNT0_INT_EN;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
-			XSCALE1_COUNT1_INT_EN;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = XSCALE1_CCOUNT_INT_EN;
-		evt = 0;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	if (XSCALE_PERFCTR_CCNT == event->config_base) {
-		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return XSCALE_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
-			return XSCALE_COUNTER1;
-		}
-
-		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
-			return XSCALE_COUNTER0;
-		}
-
-		return -EAGAIN;
-	}
-}
-
-static void
-xscale1pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val |= XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale1pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE1,
-	.name		= "xscale1",
-	.handle_irq	= xscale1pmu_handle_irq,
-	.enable		= xscale1pmu_enable_event,
-	.disable	= xscale1pmu_disable_event,
-	.read_counter	= xscale1pmu_read_counter,
-	.write_counter	= xscale1pmu_write_counter,
-	.get_event_idx	= xscale1pmu_get_event_idx,
-	.start		= xscale1pmu_start,
-	.stop		= xscale1pmu_stop,
-	.cache_map	= &xscale_perf_cache_map,
-	.event_map	= &xscale_perf_map,
-	.raw_event_mask	= 0xFF,
-	.num_events	= 3,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-const struct arm_pmu *__init xscale1pmu_init(void)
-{
-	return &xscale1pmu;
-}
-
-#define XSCALE2_OVERFLOWED_MASK	0x01f
-#define XSCALE2_CCOUNT_OVERFLOW	0x001
-#define XSCALE2_COUNT0_OVERFLOW	0x002
-#define XSCALE2_COUNT1_OVERFLOW	0x004
-#define XSCALE2_COUNT2_OVERFLOW	0x008
-#define XSCALE2_COUNT3_OVERFLOW	0x010
-#define XSCALE2_CCOUNT_INT_EN	0x001
-#define XSCALE2_COUNT0_INT_EN	0x002
-#define XSCALE2_COUNT1_INT_EN	0x004
-#define XSCALE2_COUNT2_INT_EN	0x008
-#define XSCALE2_COUNT3_INT_EN	0x010
-#define XSCALE2_COUNT0_EVT_SHFT	0
-#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT	8
-#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT	16
-#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT	24
-#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-	/* bits 1-2 and 4-23 are read-unpredictable */
-	return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
-	/* bits 4-23 are write-as-0, 24-31 are write ignored */
-	val &= 0xf;
-	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
-	return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc, of_flags;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/* Disable the PMU. */
-	pmnc = xscale2pmu_read_pmnc();
-	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	/* Check the overflow flag register. */
-	of_flags = xscale2pmu_read_overflow_flags();
-	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	/* Clear the overflow bits. */
-	xscale2pmu_write_overflow_flags(of_flags);
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien |= XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien |= XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien |= XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien |= XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien |= XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien &= ~XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien &= ~XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien &= ~XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien &= ~XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien &= ~XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	int idx = xscale1pmu_get_event_idx(cpuc, event);
-	if (idx >= 0)
-		goto out;
-
-	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
-		idx = XSCALE_COUNTER3;
-	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
-		idx = XSCALE_COUNTER2;
-out:
-	return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
-	val |= XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale2pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE2,
-	.name		= "xscale2",
-	.handle_irq	= xscale2pmu_handle_irq,
-	.enable		= xscale2pmu_enable_event,
-	.disable	= xscale2pmu_disable_event,
-	.read_counter	= xscale2pmu_read_counter,
-	.write_counter	= xscale2pmu_write_counter,
-	.get_event_idx	= xscale2pmu_get_event_idx,
-	.start		= xscale2pmu_start,
-	.stop		= xscale2pmu_stop,
-	.cache_map	= &xscale_perf_cache_map,
-	.event_map	= &xscale_perf_map,
-	.raw_event_mask	= 0xFF,
-	.num_events	= 5,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-const struct arm_pmu *__init xscale2pmu_init(void)
-{
-	return &xscale2pmu;
-}
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
 
 static int __init
 init_hw_perf_events(void)