[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 109 deletions

diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
deleted file mode 100644
index a29fa0e822ce..000000000000
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb637_map_io(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb637_uart_config);
-}
-
-static void __init csb637_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb637_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC0,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
-	.vbus_pin     = AT91_PIN_PB28,
-	.pullup_pin   = AT91_PIN_PB1,
-};
-
-static void __init csb637_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb637_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb637_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb637_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
-	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= csb637_map_io,
-	.init_irq	= csb637_init_irq,
-	.init_machine	= csb637_board_init,
-MACHINE_END