ARM: davinci: wrap HW interrupt numbers with a macro

Once we select SPARSE_IRQ, the interrupt numbers defined in mach/irqs.h
will only signify the hardware interrupt offsets, not the interrupt
numbers seen by linux. Introduce a wrapper macro that translates the
hwirq number to virtual numbers. For now it's just a dummy. Use that
macro when specifying the interrupts in resources for platform devices.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

1 files changed, 17 insertions, 14 deletions

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index e8dbbb7479ab..722c463f9b18 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -56,7 +56,7 @@ static struct resource i2c_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= IRQ_I2C,
+		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -84,8 +84,8 @@ static struct resource ide_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= IRQ_IDE,
-		.end		= IRQ_IDE,
+		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
+		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -133,11 +133,11 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* IRQs:  MMC/SD, then SDIO */
 	{
-		.start = IRQ_MMCINT,
+		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
 		.flags = IORESOURCE_IRQ,
 	}, {
 		/* different on dm355 */
-		.start = IRQ_SDIOINT,
+		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -163,10 +163,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* IRQs:  MMC/SD, then SDIO */
 	{
-		.start = IRQ_DM355_MMCINT1,
+		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
 		.flags = IORESOURCE_IRQ,
 	}, {
-		.start = IRQ_DM355_SDIOINT1,
+		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -219,7 +219,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
 							SZ_4K - 1;
-			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
+			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
+							IRQ_DM365_SDIOINT1);
 			davinci_mmcsd1_device.name = "da830-mmc";
 		} else
 			break;
@@ -230,7 +231,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 		if (cpu_is_davinci_dm355()) {
 			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
 			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
+							IRQ_DM355_SDIOINT0);
 
 			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
 			davinci_cfg_reg(DM355_MMCSD0);
@@ -241,7 +243,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
 			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
 							SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
+							IRQ_DM365_SDIOINT0);
 			davinci_mmcsd0_device.name = "da830-mmc";
 		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
@@ -313,13 +316,13 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata)
 struct davinci_timer_instance davinci_timer_instance[2] = {
 	{
 		.base		= DAVINCI_TIMER0_BASE,
-		.bottom_irq	= IRQ_TINT0_TINT12,
-		.top_irq	= IRQ_TINT0_TINT34,
+		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12),
+		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34),
 	},
 	{
 		.base		= DAVINCI_TIMER1_BASE,
-		.bottom_irq	= IRQ_TINT1_TINT12,
-		.top_irq	= IRQ_TINT1_TINT34,
+		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT12),
+		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT34),
 	},
 };