summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-09-17 00:52:38 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2019-09-17 00:52:38 +0200
commit399eb9b6cbf31ff6ef91a6930e2e94c703d74078 (patch)
tree60c26e51c167efdfec5ab5821111df9ea90cbf7f /arch/arm/mach-davinci
parentMerge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff)
parentMerge tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel... (diff)
downloadlinux-399eb9b6cbf31ff6ef91a6930e2e94c703d74078.tar.xz
linux-399eb9b6cbf31ff6ef91a6930e2e94c703d74078.zip
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c90
1 files changed, 66 insertions, 24 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0628e7d7dcf3..5b3549f1236c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -36,6 +36,7 @@
#include <linux/platform_data/ti-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/uio_pruss.h>
+#include <linux/property.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
#include <linux/regulator/fixed.h>
@@ -802,37 +803,79 @@ static const short da850_evm_mmcsd0_pins[] __initconst = {
-1
};
-static void da850_panel_power_ctrl(int val)
-{
- /* lcd backlight */
- gpio_set_value(DA850_LCD_BL_PIN, val);
+static struct property_entry da850_lcd_backlight_props[] = {
+ PROPERTY_ENTRY_BOOL("default-on"),
+ { }
+};
- /* lcd power */
- gpio_set_value(DA850_LCD_PWR_PIN, val);
-}
+static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
+ .dev_id = "gpio-backlight",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
+ { }
+ },
+};
+
+static const struct platform_device_info da850_lcd_backlight_info = {
+ .name = "gpio-backlight",
+ .id = PLATFORM_DEVID_NONE,
+ .properties = da850_lcd_backlight_props,
+};
+
+static struct regulator_consumer_supply da850_lcd_supplies[] = {
+ REGULATOR_SUPPLY("lcd", NULL),
+};
+
+static struct regulator_init_data da850_lcd_supply_data = {
+ .consumer_supplies = da850_lcd_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config da850_lcd_supply = {
+ .supply_name = "lcd",
+ .microvolts = 33000000,
+ .init_data = &da850_lcd_supply_data,
+};
+
+static struct platform_device da850_lcd_supply_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1, /* Dummy fixed regulator is 0 */
+ .dev = {
+ .platform_data = &da850_lcd_supply,
+ },
+};
+
+static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
+ &da850_lcd_backlight_gpio_table,
+ &da850_lcd_supply_gpio_table,
+};
static int da850_lcd_hw_init(void)
{
+ struct platform_device *backlight;
int status;
- status = gpio_request(DA850_LCD_BL_PIN, "lcd bl");
- if (status < 0)
- return status;
-
- status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr");
- if (status < 0) {
- gpio_free(DA850_LCD_BL_PIN);
- return status;
- }
+ gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
+ ARRAY_SIZE(da850_lcd_gpio_lookups));
- gpio_direction_output(DA850_LCD_BL_PIN, 0);
- gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+ backlight = platform_device_register_full(&da850_lcd_backlight_info);
+ if (IS_ERR(backlight))
+ return PTR_ERR(backlight);
- /* Switch off panel power and backlight */
- da850_panel_power_ctrl(0);
-
- /* Switch on panel power and backlight */
- da850_panel_power_ctrl(1);
+ status = platform_device_register(&da850_lcd_supply_device);
+ if (status)
+ return status;
return 0;
}
@@ -1443,7 +1486,6 @@ static __init void da850_evm_init(void)
if (ret)
pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
- sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);