Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
new file mode 100644
index 000000000000..2c64a0b0502e
--- /dev/null
+++ b/arch/arm/mach-footbridge/time.c
@@ -0,0 +1,180 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/time.h
+ *
+ *  Copyright (C) 1998 Russell King.
+ *  Copyright (C) 1998 Phil Blundell
+ *
+ * CATS has a real-time clock, though the evaluation board doesn't.
+ *
+ * Changelog:
+ *  21-Mar-1998	RMK	Created
+ *  27-Aug-1998	PJB	CATS support
+ *  28-Dec-1998	APH	Made leds optional
+ *  20-Jan-1999	RMK	Started merge of EBSA285, CATS and NetWinder
+ *  16-Mar-1999	RMK	More support for EBSA285-like machines with RTCs in
+ */
+
+#define RTC_PORT(x)		(rtc_base+(x))
+#define RTC_ALWAYS_BCD		0
+
+#include <linux/timex.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/mach/time.h>
+#include "common.h"
+
+static int rtc_base;
+
+static unsigned long __init get_isa_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int i;
+
+	// check to see if the RTC makes sense.....
+	if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
+		return mktime(1970, 1, 1, 0, 0, 0);
+
+	/* The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+	/* read RTC exactly on falling edge of update flag */
+	for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
+		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+			break;
+
+	for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
+		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+			break;
+
+	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+		sec  = CMOS_READ(RTC_SECONDS);
+		min  = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day  = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon  = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(day);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+	if ((year += 1900) < 1970)
+		year += 100;
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+static int set_isa_cmos_time(void)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+	unsigned long nowtime = xtime.tv_sec;
+
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else
+		retval = -1;
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	return retval;
+}
+
+void __init isa_rtc_init(void)
+{
+	if (machine_is_co285() ||
+	    machine_is_personal_server())
+		/*
+		 * Add-in 21285s shouldn't access the RTC
+		 */
+		rtc_base = 0;
+	else
+		rtc_base = 0x70;
+
+	if (rtc_base) {
+		int reg_d, reg_b;
+
+		/*
+		 * Probe for the RTC.
+		 */
+		reg_d = CMOS_READ(RTC_REG_D);
+
+		/*
+		 * make sure the divider is set
+		 */
+		CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
+
+		/*
+		 * Set control reg B
+		 *   (24 hour mode, update enabled)
+		 */
+		reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
+		reg_b |= 2;
+		CMOS_WRITE(reg_b, RTC_REG_B);
+
+		if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
+		    CMOS_READ(RTC_REG_B) == reg_b) {
+			struct timespec tv;
+
+			/*
+			 * We have a RTC.  Check the battery
+			 */
+			if ((reg_d & 0x80) == 0)
+				printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
+
+			tv.tv_nsec = 0;
+			tv.tv_sec = get_isa_cmos_time();
+			do_settimeofday(&tv);
+			set_rtc = set_isa_cmos_time;
+		} else
+			rtc_base = 0;
+	}
+}