Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 49 insertions, 16 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ba44328464f3..60661a4b0e24 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -56,9 +56,6 @@ config MXC_USE_EPIT
 	  uses the same clocks as the GPT. Anyway, on some systems the GPT
 	  may be in use for other purposes.
 
-config MXC_ULPI
-	bool
-
 config ARCH_HAS_RNGA
 	bool
 
@@ -176,6 +173,7 @@ config ARCH_MX1ADS
 config MACH_SCB9328
 	bool "Synertronixx scb9328"
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
 	help
 	  Say Y here if you are using a Synertronixx scb9328 board
 
@@ -233,7 +231,7 @@ config MACH_EUKREA_CPUIMX25SD
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX25
 
 choice
@@ -284,7 +282,7 @@ config MACH_PCM038
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -314,7 +312,7 @@ config MACH_CPUIMX27
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
@@ -369,7 +367,7 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for MX27PDK platform. This includes specific
@@ -414,7 +412,7 @@ config MACH_PCA100
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
@@ -481,7 +479,7 @@ config MACH_MX31LILLY
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -497,7 +495,7 @@ config MACH_MX31LITE
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
@@ -514,7 +512,7 @@ config MACH_PCM037
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -544,7 +542,7 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
@@ -571,7 +569,7 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -595,7 +593,7 @@ config MACH_ARMADILLO5X0
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -639,7 +637,7 @@ config MACH_PCM043
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX35
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -673,7 +671,7 @@ config MACH_EUKREA_CPUIMX35SD
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX35
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
@@ -816,6 +814,41 @@ config SOC_IMX6Q
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
+config SOC_IMX6SL
+	bool "i.MX6 SoloLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select CPU_V7
+	select HAVE_IMX_ANATOP
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_IMX6SL
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+
+	help
+	  This enables support for Freescale i.MX6 SoloLite processor.
+
+config SOC_VF610
+	bool "Vybrid Family VF610 support"
+	select CPU_V7
+	select ARM_GIC
+	select CLKSRC_OF
+	select PINCTRL
+	select PINCTRL_VF610
+	select VF_PIT_TIMER
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+
+	help
+	  This enable support for Freescale Vybrid VF610 processor.
+
 endif
 
 source "arch/arm/mach-imx/devices/Kconfig"