Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm soc-specific pinctrl changes from Olof Johansson:
 "With this, five platforms are moving to the relatively new pinctrl
  subsystem for their pin management, replacing the older soc specific
  in-kernel interfaces with common code.

  There is quite a bit of net addition of code for each platform being
  added to the pinctrl subsystem.  But the payback comes later when
  adding new boards can be done by only providing new device trees
  instead."

Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c}

* tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
  mtd: nand: gpmi: fix compile error caused by pinctrl call
  ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
  ARM: nomadik: enable PINCTRL_NOMADIK where needed
  ARM: mxs: enable pinctrl support
  video: mxsfb: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  serial: amba-pl011: adopt pinctrl support
  spi/imx: adopt pinctrl support
  i2c: imx: adopt pinctrl support
  can: flexcan: adopt pinctrl support
  net: fec: adopt pinctrl support
  ARM: ux500: switch MSP to using pinctrl for pins
  ARM: ux500: alter MSP registration to return a device pointer
  ARM: ux500: switch to using pinctrl for uart0
  ARM: ux500: delete custom pin control system
  ARM: ux500: switch over to Nomadik pinctrl driver
  ...

10 files changed, 27 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f72d399ff3d6..c8f83e9e5633 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -844,6 +844,8 @@ config SOC_IMX6Q
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
+	select PINCTRL
+	select PINCTRL_IMX6Q
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5cca573964f0..5f577fbda2c8 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -14,6 +14,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -81,6 +82,8 @@ static void __init imx51_dt_init(void)
 
 	of_irq_init(imx51_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx51_iomuxc_of_match, node);
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 4172279b3900..574eca4b89a5 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -15,6 +15,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -88,6 +89,8 @@ static void __init imx53_dt_init(void)
 
 	of_irq_init(imx53_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx53_iomuxc_of_match, node);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9af768..3df360a52c17 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -19,6 +19,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <asm/smp_twd.h>
@@ -77,6 +78,12 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 
 static void __init imx6q_init_machine(void)
 {
+	/*
+	 * This should be removed when all imx6q boards have pinctrl
+	 * states for devices defined in device tree.
+	 */
+	pinctrl_provide_dummies();
+
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 					   ksz9021rn_phy_fixup);
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2bded591d5c2..fcafd3dafb8c 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
@@ -58,4 +59,5 @@ void __init imx1_soc_init(void)
 						MX1_GPIO_INT_PORTC, 0);
 	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
 						MX1_GPIO_INT_PORTD, 0);
+	pinctrl_provide_dummies();
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 14d540edfd1e..5f43905e5290 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -88,6 +89,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 153b457acdc0..6ff37140a4f8 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -95,6 +96,7 @@ void __init imx25_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
 	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
 
+	pinctrl_provide_dummies();
 	/* i.mx25 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
 	/* i.mx25 has the i.mx31 type audmux */
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 8cb3f5e3e569..25662558e018 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -89,6 +90,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 74127389e7ab..9128d15b1eb7 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/system_misc.h>
@@ -267,6 +268,7 @@ void __init imx35_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 
+	pinctrl_provide_dummies();
 	if (to_version == 1) {
 		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
 			strlen(imx35_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index e10f3914fcfe..ba91e6b31cf4 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
@@ -223,6 +224,7 @@ void __init imx53_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
 	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 
+	pinctrl_provide_dummies();
 	/* i.mx53 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);