ARM: Kirkwood: Remove mach-kirkwood

Now that all boards have been converted to DT and all the support code
lives in mach-mvebu, we can remove mach-kirkwood.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 0 insertions, 128 deletions

diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
deleted file mode 100644
index 5154bd2a3ad3..000000000000
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6281-setup.c
- *
- * Marvell RD-88F6281 Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition rd88f6281_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_2M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6281_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data rd88f6281_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6281_switch_chip_data,
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data rd88f6281_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
-	.gpio_card_detect = 28,
-	.gpio_write_protect = -1,
-};
-
-static unsigned int rd88f6281_mpp_config[] __initdata = {
-	MPP28_GPIO,
-	0
-};
-
-static void __init rd88f6281_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(rd88f6281_mpp_config);
-
-	kirkwood_nand_init(rd88f6281_nand_parts,
-			   ARRAY_SIZE(rd88f6281_nand_parts),
-			   25);
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&rd88f6281_ge00_data);
-	kirkwood_pcie_id(&dev, &rev);
-	if (rev == MV88F6281_REV_A0) {
-		rd88f6281_switch_chip_data.sw_addr = 10;
-		kirkwood_ge01_init(&rd88f6281_ge01_data);
-	} else {
-		rd88f6281_switch_chip_data.port_names[4] = "wan";
-	}
-	kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
-
-	kirkwood_sata_init(&rd88f6281_sata_data);
-	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
-	kirkwood_uart0_init();
-}
-
-static int __init rd88f6281_pci_init(void)
-{
-	if (machine_is_rd88f6281())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(rd88f6281_pci_init);
-
-MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
-	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f6281_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END