ARM: Kirkwood: Remove mach-kirkwood

Now that all boards have been converted to DT and all the support code
lives in mach-mvebu, we can remove mach-kirkwood.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 0 insertions, 216 deletions

diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
deleted file mode 100644
index 8736f8c97518..000000000000
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *
- * HP t5325 Thin Client setup
- *
- * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <sound/alc5623.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition hp_t5325_partitions[] = {
-	{
-		.name		= "u-boot env",
-		.size		= SZ_64K,
-		.offset		= SZ_512K + SZ_256K,
-	},
-	{
-		.name		= "permanent u-boot env",
-		.size		= SZ_64K,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "HP env",
-		.size		= SZ_64K,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-	{
-		.name		= "u-boot",
-		.size		= SZ_512K,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "SSD firmware",
-		.size		= SZ_256K,
-		.offset		= SZ_512K,
-	},
-};
-
-static const struct flash_platform_data hp_t5325_flash = {
-	.type		= "mx25l8005",
-	.name		= "spi_flash",
-	.parts		= hp_t5325_partitions,
-	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
-};
-
-static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &hp_t5325_flash,
-		.irq		= -1,
-	},
-};
-
-static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data hp_t5325_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_keys_button hp_t5325_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= 45,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data hp_t5325_button_data = {
-	.buttons	= hp_t5325_buttons,
-	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
-};
-
-static struct platform_device hp_t5325_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &hp_t5325_button_data,
-	}
-};
-
-static struct platform_device hp_t5325_audio_device = {
-	.name		= "t5325-audio",
-	.id		= -1,
-};
-
-static unsigned int hp_t5325_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_SPI_SCn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_SD_CLK,
-	MPP13_GPIO,
-	MPP14_GPIO,
-	MPP15_GPIO,
-	MPP16_GPIO,
-	MPP17_GPIO,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_GPIO,
-	MPP21_GPIO,
-	MPP22_GPIO,
-	MPP23_GPIO,
-	MPP32_GPIO,
-	MPP33_GE1_TXCTL,
-	MPP39_AU_I2SBCLK,
-	MPP40_AU_I2SDO,
-	MPP43_AU_I2SDI,
-	MPP41_AU_I2SLRCLK,
-	MPP42_AU_I2SMCLK,
-	MPP45_GPIO,		/* Power button */
-	MPP48_GPIO,		/* Board power off */
-	0
-};
-
-static struct alc5623_platform_data alc5621_data = {
-	.add_ctrl = 0x3700,
-	.jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("alc5621", 0x1a),
-		.platform_data = &alc5621_data,
-	},
-};
-
-#define HP_T5325_GPIO_POWER_OFF		48
-
-static void hp_t5325_power_off(void)
-{
-	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
-}
-
-static void __init hp_t5325_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(hp_t5325_mpp_config);
-
-	kirkwood_uart0_init();
-	spi_register_board_info(hp_t5325_spi_slave_info,
-				ARRAY_SIZE(hp_t5325_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	kirkwood_ge00_init(&hp_t5325_ge00_data);
-	kirkwood_sata_init(&hp_t5325_sata_data);
-	kirkwood_ehci_init();
-	platform_device_register(&hp_t5325_button_device);
-	platform_device_register(&hp_t5325_audio_device);
-
-	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
-	kirkwood_audio_init();
-
-	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = hp_t5325_power_off;
-	else
-		pr_err("t5325: failed to configure power-off GPIO\n");
-}
-
-static int __init hp_t5325_pci_init(void)
-{
-	if (machine_is_t5325())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(hp_t5325_pci_init);
-
-MACHINE_START(T5325, "HP t5325 Thin Client")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= hp_t5325_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END