arm: msm: add board file for MSM7x25/MSM7x27 SURF and FFA

This adds a basic board file without Kconfig changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

1 files changed, 179 insertions, 0 deletions

diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
new file mode 100644
index 000000000000..cccb9f3c9d01
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/power_supply.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
+#ifdef CONFIG_CACHE_L2X0
+#include <asm/hardware/cache-l2x0.h>
+#endif
+
+#include <mach/vreg.h>
+#include <mach/mpp.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "devices.h"
+#include "socinfo.h"
+#include "clock.h"
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x9C004300,
+		.end	= 0x9C0043ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSM_GPIO_TO_INT(132),
+		.end	= MSM_GPIO_TO_INT(132),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_dmov,
+	&msm_device_nand,
+	&smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init msm7x2x_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x2x_init(void)
+{
+	if (socinfo_init() < 0)
+		BUG();
+
+	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
+		smc91x_resources[0].start = 0x98000300;
+		smc91x_resources[0].end = 0x980003ff;
+		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
+		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
+		if (gpio_tlmm_config(GPIO_CFG(85, 0,
+					      GPIO_INPUT,
+					      GPIO_PULL_DOWN,
+					      GPIO_2MA),
+				     GPIO_ENABLE)) {
+			printk(KERN_ERR
+			       "%s: Err: Config GPIO-85 INT\n",
+				__func__);
+		}
+	}
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init msm7x2x_map_io(void)
+{
+	msm_map_common_io();
+	/* Technically dependent on the SoC but using machine_is
+	 * macros since socinfo is not available this early and there
+	 * are plans to restructure the code which will eliminate the
+	 * need for socinfo.
+	 */
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
+		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
+
+	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
+		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
+
+#ifdef CONFIG_CACHE_L2X0
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
+		/* 7x27 has 256KB L2 cache:
+			64Kb/Way and 4-Way Associativity;
+			R/W latency: 3 cycles;
+			evmon/parity/share disabled. */
+		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
+	}
+#endif
+}
+
+MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END