arm: mvebu: add basic address decoding support to Armada 370/XP

This commit adds basic support for address decoding configuration for
the Armada 370 and Armada XP SoCs, re-using the infrastructure
provided in plat-orion.

For now, only a BootROM window is configured on Armada XP, which is
needed to get the non-boot CPUs started and is therefore a requirement
for SMP support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

2 files changed, 135 insertions, 1 deletions

diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index e61d2b8fdf50..21435581b92b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,2 +1,2 @@
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
new file mode 100644
index 000000000000..fe454a4430be
--- /dev/null
+++ b/arch/arm/mach-mvebu/addr-map.c
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS	1
+#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
+#define ARMADA_XP_TARGET_ETH1		3
+#define ARMADA_XP_TARGET_PCIE_0_2	4
+#define ARMADA_XP_TARGET_ETH0		7
+#define ARMADA_XP_TARGET_PCIE_1_3	8
+
+#define ARMADA_370_TARGET_DEV_BUS       1
+#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
+#define ARMADA_370_TARGET_PCIE_0        4
+#define ARMADA_370_TARGET_PCIE_1        8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+	/*
+	 * Window for the BootROM, needed for SMP on Armada XP
+	 */
+	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+	{ .compatible = "marvell,armada-addr-decoding-controller" },
+	{ /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+	unsigned int offset;
+
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		offset = (win << 4);
+	else
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+	return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 20,
+	.remappable_wins = 8,
+	.win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+	struct device_node *np;
+	void __iomem *mbus_unit_addr_decoding_base;
+	void __iomem *sdram_addr_decoding_base;
+
+	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+	if (!np)
+		return -ENODEV;
+
+	mbus_unit_addr_decoding_base = of_iomap(np, 0);
+	BUG_ON(!mbus_unit_addr_decoding_base);
+
+	sdram_addr_decoding_base =
+		mbus_unit_addr_decoding_base +
+		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+	/*
+	 * Disable, clear and configure windows.
+	 */
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+	else if (of_machine_is_compatible("marvell,armada370"))
+		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+	else {
+		pr_err("Unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    sdram_addr_decoding_base);
+	return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);