ARM i.MX: Merge i.MX5 support into mach-imx

This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx
and adjusts the Makefile/Kconfig entries in a way that it's possible
to compile i.MX5 together with i.MX3/6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>

1 files changed, 0 insertions, 429 deletions

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
deleted file mode 100644
index 5c837603ff0f..000000000000
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET	IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET			0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ	0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
-	{
-		.gpio		= BABBAGE_POWER_KEY,
-		.code		= BTN_0,
-		.desc		= "PWR",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
-	.buttons	= babbage_buttons,
-	.nbuttons	= ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_EIM_D25__UART3_RXD,
-	MX51_PAD_EIM_D26__UART3_TXD,
-	MX51_PAD_EIM_D27__UART3_RTS,
-	MX51_PAD_EIM_D24__UART3_CTS,
-
-	/* I2C1 */
-	MX51_PAD_EIM_D16__I2C1_SDA,
-	MX51_PAD_EIM_D19__I2C1_SCL,
-
-	/* I2C2 */
-	MX51_PAD_KEY_COL4__I2C2_SCL,
-	MX51_PAD_KEY_COL5__I2C2_SDA,
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__I2C1_CLK,
-	MX51_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB reset line*/
-	MX51_PAD_GPIO1_7__GPIO1_7,
-
-	/* USB PHY reset line */
-	MX51_PAD_EIM_D21__GPIO2_5,
-
-	/* FEC */
-	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDATA1,
-	MX51_PAD_EIM_CS2__FEC_RDATA2,
-	MX51_PAD_EIM_CS3__FEC_RDATA3,
-	MX51_PAD_EIM_CS4__FEC_RX_ER,
-	MX51_PAD_EIM_CS5__FEC_CRS,
-	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
-	MX51_PAD_NANDF_D9__FEC_RDATA0,
-	MX51_PAD_NANDF_D8__FEC_TDATA0,
-	MX51_PAD_NANDF_CS2__FEC_TX_ER,
-	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDATA1,
-	MX51_PAD_NANDF_CS5__FEC_TDATA2,
-	MX51_PAD_NANDF_CS6__FEC_TDATA3,
-	MX51_PAD_NANDF_CS7__FEC_TX_EN,
-	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
-	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO2_14,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* CD/WP from controller */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-	/* CD/WP gpio */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* eCSPI1 */
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
-	.bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
-	{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
-	{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	int ret;
-
-	/* Set USBH1_STP to GPIO and toggle it */
-	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-	ret = gpio_request_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
-	if (ret) {
-		pr_debug("failed to get USBH1 pins: %d\n", ret);
-		return ret;
-	}
-
-	msleep(100);
-	gpio_set_value(BABBAGE_USBH1_STP, 1);
-	gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
-	gpio_free_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-	return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
-	int ret;
-
-	/* Reset USB hub */
-	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
-					GPIOF_OUT_INIT_LOW, "GPIO1_7");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
-		return;
-	}
-
-	msleep(2);
-	/* Deassert reset */
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
-					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init babbage_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx51_babbage_spi_cs[] = {
-	BABBAGE_ECSPI1_CS0,
-	BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
-	.chipselect     = mx51_babbage_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
-	.cd_gpio = BABBAGE_SD2_CD,
-	.wp_gpio = BABBAGE_SD2_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
-					 ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
-
-	imx51_soc_init();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-	imx51_babbage_common_init();
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	babbage_fec_reset();
-	imx51_add_fec(NULL);
-
-	/* Set the PAD settings for the pwr key. */
-	mxc_iomux_v3_setup_pad(power_key);
-	imx_add_gpio_keys(&imx_button_data);
-
-	imx51_add_imx_i2c(0, &babbage_i2c_data);
-	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	imx51_add_hsi2c(&babbage_hsi2c_data);
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_usbh1_active();
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-	/* setback USBH1_STP to be function */
-	mxc_iomux_v3_setup_pad(usbh1stp);
-	babbage_usbhub_reset();
-
-	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
-	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
-	spi_register_board_info(mx51_babbage_spi_board_info,
-		ARRAY_SIZE(mx51_babbage_spi_board_info));
-	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
-	imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_babbage_timer = {
-	.init = mx51_babbage_timer_init,
-};
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
-	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_babbage_timer,
-	.init_machine = mx51_babbage_init,
-MACHINE_END