ARM: OMAP1: Palm Tungsten E board clean-up

Mostly gpio clean-up.

Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 22 insertions, 61 deletions

diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f392f5a014ea..ca1a4bf78a10 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -10,6 +10,8 @@
  * Maintainers : http://palmtelinux.sf.net
  *                palmtelinux-developpers@lists.sf.net
  *
+ * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -24,8 +26,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
+#include <linux/apm-emulation.h>
 
-#include <asm/apm.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -51,11 +53,11 @@ static void __init omap_palmte_init_irq(void)
 	omap_gpio_init();
 }
 
-static int palmte_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_F3),
-	KEY(0, 3, KEY_F4),
+static const int palmte_keymap[] = {
+	KEY(0, 0, KEY_F1),		/* Calendar */
+	KEY(0, 1, KEY_F2),		/* Contacts */
+	KEY(0, 2, KEY_F3),		/* Tasks List */
+	KEY(0, 3, KEY_F4),		/* Note Pad */
 	KEY(0, 4, KEY_POWER),
 	KEY(1, 0, KEY_LEFT),
 	KEY(1, 1, KEY_DOWN),
@@ -68,7 +70,7 @@ static int palmte_keymap[] = {
 static struct omap_kp_platform_data palmte_kp_data = {
 	.rows	= 8,
 	.cols	= 8,
-	.keymap = palmte_keymap,
+	.keymap = (int *) palmte_keymap,
 	.rep	= 1,
 	.delay	= 12,
 };
@@ -180,7 +182,7 @@ static struct platform_device palmte_irda_device = {
 	.resource	= palmte_irda_resources,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *palmte_devices[] __initdata = {
 	&palmte_rom_device,
 	&palmte_kp_device,
 	&palmte_lcd_device,
@@ -273,7 +275,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 		info->time = 0;
 	} else {
 		while (hi > lo + 1) {
-			mid = (hi + lo) >> 2;
+			mid = (hi + lo) >> 1;
 			if (batt <= palmte_battery_sample[mid])
 				lo = mid;
 			else
@@ -321,7 +323,7 @@ static struct tsc2102_config palmte_tsc2102_config = {
 	.alsa_config	= &palmte_alsa_config,
 };
 
-static struct omap_board_config_kernel palmte_config[] = {
+static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_MMC,		&palmte_mmc_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
@@ -339,74 +341,34 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 	},
 };
 
-/* Periodically check for changes on important input pins */
-struct timer_list palmte_pin_timer;
-int prev_power, prev_headphones;
-
-static void palmte_pin_handler(unsigned long data) {
-	int power, headphones;
-
-	power = !omap_get_gpio_datain(PALMTE_DC_GPIO);
-	headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
-
-	if (power && !prev_power)
-		printk(KERN_INFO "PM: cable connected\n");
-	else if (!power && prev_power)
-		printk(KERN_INFO "PM: cable disconnected\n");
-
-	if (headphones && !prev_headphones) {
+static void palmte_headphones_detect(void *data, int state)
+{
+	if (state) {
 		/* Headphones connected, disable speaker */
 		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
 		printk(KERN_INFO "PM: speaker off\n");
-	} else if (!headphones && prev_headphones) {
+	} else {
 		/* Headphones unplugged, re-enable speaker */
 		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
 		printk(KERN_INFO "PM: speaker on\n");
 	}
-
-	prev_power = power;
-	prev_headphones = headphones;
-	mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));
 }
 
-static void __init palmte_gpio_setup(void)
+static void __init palmte_misc_gpio_setup(void)
 {
-	/* Set TSC2102 PINTDAV pin as input */
+	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
 	if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
 		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 		return;
 	}
 	omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
 
-	/* Monitor cable-connected signals */
-	if (omap_request_gpio(PALMTE_DC_GPIO) ||
-			omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||
-			omap_request_gpio(PALMTE_USBDETECT_GPIO)) {
+	/* Set USB-or-DC-IN pin as input (unused) */
+	if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
 		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 		return;
 	}
-	omap_set_gpio_direction(PALMTE_DC_GPIO, 1);
 	omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
-	omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);
-
-	/* Set speaker-enable pin as output */
-	if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {
-		printk(KERN_ERR "Could not reserve speaker GPIO!\n");
-		return;
-	}
-	omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);
-
-	/* Monitor the headphones-connected signal */
-	if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {
-		printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");
-		return;
-	}
-	omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);
-
-	prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);
-	prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
-	setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);
-	palmte_pin_handler(0);
 }
 
 static void __init omap_palmte_init(void)
@@ -414,13 +376,12 @@ static void __init omap_palmte_init(void)
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-
+	palmte_misc_gpio_setup();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	palmte_gpio_setup();
 }
 
 static void __init omap_palmte_map_io(void)