Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	drivers/mtd/nand/sh_flctl.c

Maxim's patch to initialise sysfs attributes depends on the patch which
actually adds sysfs_attr_init().

1 files changed, 51 insertions, 12 deletions

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acafdbc8aa16..4377a4cf36eb 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -34,7 +34,7 @@
 #include <plat/gpmc-smc91x.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -209,7 +209,47 @@ static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* Enable input logic and pull all lines up when eMMC is on. */
+static struct omap_board_mux rx51_mmc2_on_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/* Disable input logic and pull all lines down when eMMC is off. */
+static struct omap_board_mux rx51_mmc2_off_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Current flows to eMMC when eMMC is off and the data lines are pulled up,
+ * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
+ */
+static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+{
+	if (power_on)
+		omap_mux_write_array(rx51_mmc2_on_mux);
+	else
+		omap_mux_write_array(rx51_mmc2_off_mux);
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -222,25 +262,29 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.name		= "internal",
 		.mmc		= 2,
-		.wires		= 8,
+		.wires		= 8, /* See also rx51_mmc2_remux */
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
 		.power_saving	= true,
+		.remux		= rx51_mmc2_remux,
 	},
 	{}	/* Terminator */
 };
 
 static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply			= "vmmc",
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.0",
 };
 
 static struct regulator_consumer_supply rx51_vmmc2_supply = {
-	.supply			= "vmmc",
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.1",
 };
 
 static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply			= "vmmc_aux",
+	.supply   = "vmmc_aux",
+	.dev_name = "mmci-omap-hs.1",
 };
 
 static struct regulator_init_data rx51_vaux1 = {
@@ -375,12 +419,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 	gpio_request(gpio + 7, "speaker_en");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* set up MMC adapters, linking their regulators to them */
-	twl4030_mmc_init(mmc);
-	rx51_vmmc1_supply.dev = mmc[0].dev;
-	rx51_vmmc2_supply.dev = mmc[1].dev;
-	rx51_vsim_supply.dev = mmc[1].dev;
-
 	return 0;
 }
 
@@ -751,5 +789,6 @@ void __init rx51_peripherals_init(void)
 	rx51_init_wl1251();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
+	omap2_hsmmc_init(mmc);
 }