Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...

52 files changed, 471 insertions, 348 deletions

diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 49e64057cb67..41b0a2fe0b04 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -280,7 +280,6 @@ static struct omap_dss_board_info cm_t35_dss_data = {
 
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
 };
 
 static struct tdo24m_platform_data tdo24m_config = {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 50e40bc3f8f7..518091c5f77c 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -133,7 +133,6 @@ static void __init n8x0_usb_init(void) {}
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel = 1,
 };
 
 static struct spi_board_info n800_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 0e9d89a2048f..0f65c3b202ac 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -138,17 +138,14 @@ static struct lp5523_platform_data rx51_lp5523_platform_data = {
 
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,
 };
 
 static struct omap2_mcspi_device_config mipid_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,
 };
 
 static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,
 };
 
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 2a13b9f6c61c..a43a765dd092 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -121,7 +121,6 @@ static struct omap_dss_board_info zoom_dss_data = {
 
 static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 	.turbo_mode		= 1,
-	.single_channel	= 1,  /* 0: slave, 1: master */
 };
 
 static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 39f9d5a58d0c..7072e0d651b1 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,6 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 
+#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index e069a9be93df..cd7fd0f91149 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -22,6 +22,7 @@
 #include <asm/div64.h>
 
 #include <plat/clock.h>
+#include <plat/cpu.h>
 
 #include "clock.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 61ad3855f10a..bace9308a4db 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -14,11 +14,14 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/list.h>
 
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index d87bc9cb2a36..dfda9a3f2cb2 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,8 +21,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/hardware.h>
 #include <plat/clock.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 0cc12879e7b9..3b4d09a50399 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,8 +17,10 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 80bb0f0e92e6..12500097378d 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/cpu.h>
 #include <plat/clock.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 952c3e01c9eb..794d82702c85 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/hardware.h>
 #include <plat/clock.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index d75e5f6b8a01..981b9f9111a4 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -20,14 +20,15 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "clock3xxx.h"
 #include "clock34xx.h"
 #include "clock36xx.h"
 #include "clock3517.h"
-
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 08e86d793a1f..79b98f22f207 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -26,8 +26,11 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
+
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "clock44xx.h"
 #include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 04d39cdd2112..389f9f8b570c 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,8 +18,10 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "common.h"
+#include <plat/hardware.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "cm.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index 6a836303252c..535d66e2822c 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -18,8 +18,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
+#include "iomap.h"
 #include "common.h"
-
 #include "cm.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 6204deaf85b1..bd8810c3753f 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -20,8 +20,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
+#include "iomap.h"
 #include "common.h"
-
 #include "cm.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 799a617ade30..9498b0f5fbd0 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -33,7 +33,6 @@
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
 };
 
 static struct ads7846_platform_data ads7846_config = {
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index aaf421178c91..1549c11000d3 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,12 +17,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "common.h"
+#include <plat/hardware.h>
 #include <plat/board.h>
 #include <plat/mux.h>
-
 #include <plat/clock.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "sdrc.h"
 #include "control.h"
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7e9338e8d684..4897ec02e798 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -134,6 +134,8 @@ void omap4_map_io(void);
 void ti81xx_map_io(void);
 void omap_barriers_init(void);
 
+extern void __init omap_init_consistent_dma_size(void);
+
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true
@@ -236,5 +238,10 @@ static inline u32 omap4_mpuss_read_prev_context_state(void)
 	return 0;
 }
 #endif
+
+struct omap_sdrc_params;
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+				      struct omap_sdrc_params *sdrc_cs1);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 114c037e433c..08e674bb0417 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,9 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include "common.h"
+#include <plat/hardware.h>
 #include <plat/sdrc.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 96c4bcc0a75c..a406fd045ce1 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,7 +16,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
 #define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
-#include <mach/io.h>
 #include <mach/ctrl_module_core_44xx.h>
 #include <mach/ctrl_module_wkup_44xx.h>
 #include <mach/ctrl_module_pad_core_44xx.h>
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 881dab64ef6a..e4336035c0ea 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 
-#include <plat/tc.h>
+#include "iomap.h"
 #include <plat/board.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 62e133ca4314..9706c648bc19 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -30,6 +30,7 @@
 #include <plat/omap-pm.h>
 #include "common.h"
 
+#include "iomap.h"
 #include "mux.h"
 #include "control.h"
 #include "display.h"
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index ce91aad4cdad..e28e761b7ab9 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -21,6 +21,10 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shishkin");
 
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 64c0caed9516..2f994e5194e8 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,6 +23,9 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
 
 static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
@@ -31,6 +34,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	struct omap_gpio_dev_attr *dev_attr;
 	char *name = "omap_gpio";
 	int id;
+	struct powerdomain *pwrdm;
 
 	/*
 	 * extract the device id from name field available in the
@@ -52,7 +56,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->bank_width = dev_attr->bank_width;
 	pdata->dbck_flag = dev_attr->dbck_flag;
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
-
+	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
 	if (!pdata) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
@@ -61,8 +65,15 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 
 	switch (oh->class->rev) {
 	case 0:
+		if (id == 1)
+			/* non-wakeup GPIO pins for OMAP2 Bank1 */
+			pdata->non_wakeup_gpios = 0xe203ffc0;
+		else if (id == 2)
+			/* non-wakeup GPIO pins for OMAP2 Bank2 */
+			pdata->non_wakeup_gpios = 0x08700040;
+		/* fall through */
+
 	case 1:
-		pdata->bank_type = METHOD_GPIO_24XX;
 		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
 		pdata->regs->direction = OMAP24XX_GPIO_OE;
 		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
@@ -72,13 +83,19 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
 		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
 		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+		pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
 		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
 		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
 		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
 		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
+		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
+		pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
+		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
 		break;
 	case 2:
-		pdata->bank_type = METHOD_GPIO_44XX;
 		pdata->regs->revision = OMAP4_GPIO_REVISION;
 		pdata->regs->direction = OMAP4_GPIO_OE;
 		pdata->regs->datain = OMAP4_GPIO_DATAIN;
@@ -88,10 +105,17 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
 		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
 		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
 		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
 		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
 		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
 		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
+		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
+		pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
+		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
@@ -99,6 +123,9 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		return -EINVAL;
 	}
 
+	pwrdm = omap_hwmod_get_pwrdm(oh);
+	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+
 	pdev = omap_device_build(name, id - 1, oh, pdata,
 				sizeof(*pdata),	NULL, 0, false);
 	kfree(pdata);
@@ -109,9 +136,6 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		return PTR_ERR(pdev);
 	}
 
-	omap_device_disable_idle_on_suspend(pdev);
-
-	gpio_bank_count++;
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 8ad210bda9a9..386dec8d2351 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -16,6 +16,7 @@
 
 #include <asm/mach/flash.h>
 
+#include <plat/cpu.h>
 #include <plat/nand.h>
 #include <plat/board.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 5cdce10d6183..385b3e02c4a6 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -18,6 +18,7 @@
 
 #include <asm/mach/flash.h>
 
+#include <plat/cpu.h>
 #include <plat/onenand.h>
 #include <plat/board.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
index fd78f31aa1ad..b8758c8a9394 100644
--- a/arch/arm/mach-omap2/include/mach/io.h
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -1,5 +1,49 @@
 /*
  * arch/arm/mach-omap2/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
  */
 
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2d19efbbc52d..cd47a71297b9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -23,25 +23,23 @@
 #include <linux/clk.h>
 
 #include <asm/tlb.h>
-
 #include <asm/mach/map.h>
 
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 #include <plat/serial.h>
-
-#include "clock2xxx.h"
-#include "clock3xxx.h"
-#include "clock44xx.h"
-
-#include "common.h"
 #include <plat/omap-pm.h>
+#include <plat/omap_hwmod.h>
+#include <plat/multi.h>
+
+#include "iomap.h"
 #include "voltage.h"
 #include "powerdomain.h"
-
 #include "clockdomain.h"
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
+#include "common.h"
+#include "clock2xxx.h"
+#include "clock3xxx.h"
+#include "clock44xx.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -489,43 +487,3 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 }
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-u8 omap_readb(u32 pa)
-{
-	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readb);
-
-u16 omap_readw(u32 pa)
-{
-	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readw);
-
-u32 omap_readl(u32 pa)
-{
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readl);
-
-void omap_writeb(u8 v, u32 pa)
-{
-	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writeb);
-
-void omap_writew(u16 v, u32 pa)
-{
-	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writew);
-
-void omap_writel(u32 v, u32 pa)
-{
-	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
new file mode 100644
index 000000000000..e6f958165296
--- /dev/null
+++ b/arch/arm/mach-omap2/iomap.h
@@ -0,0 +1,203 @@
+/*
+ * IO mappings for OMAP2+
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP2_L3_IO_OFFSET	0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET	0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define AM33XX_L4_WK_IO_OFFSET	0xb5000000
+#define AM33XX_L4_WK_IO_ADDRESS(pa)	IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
+
+#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET		0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS	OMAP2420_DSP_MEM_BASE
+						/* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT	0xfc100000
+#define DSP_MEM_2420_SIZE	0x28000
+#define DSP_IPI_2420_PHYS	OMAP2420_DSP_IPI_BASE
+						/* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT	0xfc128000
+#define DSP_IPI_2420_SIZE	SZ_4K
+#define DSP_MMU_2420_PHYS	OMAP2420_DSP_MMU_BASE
+						/* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT	0xfc129000
+#define DSP_MMU_2420_SIZE	SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * ----------------------------------------------------------------------------
+ * AM33XX specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L4_WK_AM33XX_PHYS	L4_WK_AM33XX_BASE
+#define L4_WK_AM33XX_VIRT	(L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
+#define L4_WK_AM33XX_SIZE	SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE	SZ_8M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+/* 3430 IVA - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_44XX_SIZE		SZ_4M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+						/* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE	SZ_1M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE	SZ_8M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+						/* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
+						/* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE	SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
+						/* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_SIZE	SZ_1M
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
+
+#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
+						/* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_SIZE	SZ_1M
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 1fef061f7927..6da2d0edee11 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -14,10 +14,13 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
+
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
 
 /* selected INTC register offsets */
 
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index fe9ab7c58fae..63ab686834c1 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -263,12 +263,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	 * In MPUSS OSWR or device OFF, interrupt controller  contest is lost.
 	 */
 	mpuss_clear_prev_logic_pwrst();
-	pwrdm_clear_all_prev_pwrst(mpuss_pd);
 	if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
 		(pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
 		save_state = 2;
 
-	clear_cpu_prev_pwrst(cpu);
 	cpu_clear_prev_logic_pwrst(cpu);
 	set_cpu_next_pwrst(cpu, power_state);
 	set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index c1bf3ef0ba02..deffbf1c9627 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -23,11 +23,12 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
+
 #include <mach/hardware.h>
 #include <mach/omap-secure.h>
 
+#include "iomap.h"
 #include "common.h"
-
 #include "clockdomain.h"
 
 /* SCU base address */
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index e6dda694fd5c..5037e76e4e23 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -28,6 +28,8 @@
  *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
+#include <plat/hardware.h>
+
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 1b9596ae201e..750805c528d8 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -26,6 +26,8 @@
  * This is technically part of the OMAP2xxx clock code.
  */
 
+#include <plat/hardware.h>
+
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 4411163e012d..814bcd901596 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -220,8 +220,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 		return 0;
 
 	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
-
-	(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
+	if (!(IS_ERR_OR_NULL(d)))
+		(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
 			(void *)pwrdm, &pwrdm_suspend_fops);
 
 	return 0;
@@ -264,7 +264,7 @@ static int __init pm_dbg_init(void)
 		return 0;
 
 	d = debugfs_create_dir("pm_debug", NULL);
-	if (IS_ERR(d))
+	if (IS_ERR_OR_NULL(d))
 		return PTR_ERR(d);
 
 	(void) debugfs_create_file("count", S_IRUGO,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 184ae21feea7..52787b0eaec6 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -15,11 +15,13 @@
 #include <linux/err.h>
 #include <linux/opp.h>
 #include <linux/export.h>
+#include <linux/suspend.h>
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 #include "common.h"
 
+#include "prcm-common.h"
 #include "voltage.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
@@ -28,6 +30,12 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
+/*
+ * omap_pm_suspend: points to a function that does the SoC-specific
+ * suspend work
+ */
+int (*omap_pm_suspend)(void);
+
 static int __init _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
@@ -68,32 +76,41 @@ static void __init omap2_init_processor_devices(void)
 #define FORCEWAKEUP_SWITCH	0
 #define LOWPOWERSTATE_SWITCH	1
 
+int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		clkdm_sleep(clkdm);
+	return 0;
+}
+
 /*
  * This sets pwrdm state (other than mpu & core. Currently only ON &
  * RET are supported.
  */
-int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst)
 {
-	u32 cur_state;
-	int sleep_switch = -1;
-	int ret = 0;
-	int hwsup = 0;
+	u8 curr_pwrst, next_pwrst;
+	int sleep_switch = -1, ret = 0, hwsup = 0;
 
-	if (pwrdm == NULL || IS_ERR(pwrdm))
+	if (!pwrdm || IS_ERR(pwrdm))
 		return -EINVAL;
 
-	while (!(pwrdm->pwrsts & (1 << state))) {
-		if (state == PWRDM_POWER_OFF)
+	while (!(pwrdm->pwrsts & (1 << pwrst))) {
+		if (pwrst == PWRDM_POWER_OFF)
 			return ret;
-		state--;
+		pwrst--;
 	}
 
-	cur_state = pwrdm_read_next_pwrst(pwrdm);
-	if (cur_state == state)
+	next_pwrst = pwrdm_read_next_pwrst(pwrdm);
+	if (next_pwrst == pwrst)
 		return ret;
 
-	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		if ((pwrdm_read_pwrst(pwrdm) > state) &&
+	curr_pwrst = pwrdm_read_pwrst(pwrdm);
+	if (curr_pwrst < PWRDM_POWER_ON) {
+		if ((curr_pwrst > pwrst) &&
 			(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
 			sleep_switch = LOWPOWERSTATE_SWITCH;
 		} else {
@@ -103,12 +120,10 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		}
 	}
 
-	ret = pwrdm_set_next_pwrst(pwrdm, state);
-	if (ret) {
-		pr_err("%s: unable to set state of powerdomain: %s\n",
+	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
+	if (ret)
+		pr_err("%s: unable to set power state of powerdomain: %s\n",
 		       __func__, pwrdm->name);
-		goto err;
-	}
 
 	switch (sleep_switch) {
 	case FORCEWAKEUP_SWITCH:
@@ -119,16 +134,16 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		break;
 	case LOWPOWERSTATE_SWITCH:
 		pwrdm_set_lowpwrstchange(pwrdm);
+		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
 		break;
-	default:
-		return ret;
 	}
 
-	pwrdm_state_switch(pwrdm);
-err:
 	return ret;
 }
 
+
+
 /*
  * This API is to be called during init to set the various voltage
  * domains to the voltage as per the opp table. Typically we boot up
@@ -199,6 +214,56 @@ exit:
 	return -EINVAL;
 }
 
+#ifdef CONFIG_SUSPEND
+static int omap_pm_enter(suspend_state_t suspend_state)
+{
+	int ret = 0;
+
+	if (!omap_pm_suspend)
+		return -ENOENT; /* XXX doublecheck */
+
+	switch (suspend_state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int omap_pm_begin(suspend_state_t state)
+{
+	disable_hlt();
+	if (cpu_is_omap34xx())
+		omap_prcm_irq_prepare();
+	return 0;
+}
+
+static void omap_pm_end(void)
+{
+	enable_hlt();
+	return;
+}
+
+static void omap_pm_finish(void)
+{
+	if (cpu_is_omap34xx())
+		omap_prcm_irq_complete();
+}
+
+static const struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap_pm_begin,
+	.end		= omap_pm_end,
+	.enter		= omap_pm_enter,
+	.finish		= omap_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+#endif /* CONFIG_SUSPEND */
+
 static void __init omap3_init_voltages(void)
 {
 	if (!cpu_is_omap34xx())
@@ -241,6 +306,10 @@ static int __init omap2_common_pm_late_init(void)
 	/* Smartreflex device init */
 	omap_devinit_smartreflex();
 
+#ifdef CONFIG_SUSPEND
+	suspend_set_ops(&omap_pm_ops);
+#endif
+
 	return 0;
 }
 late_initcall(omap2_common_pm_late_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index b737b11e4499..36fa90b6ece8 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -18,10 +18,11 @@
 extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
 extern void omap_sram_idle(void);
-extern int omap3_can_sleep(void);
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 extern int omap4_idle_init(void);
+extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
+extern int (*omap_pm_suspend)(void);
 
 #if defined(CONFIG_PM_OPP)
 extern int omap3_opp_init(void);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a4eb5c280435..5ca45ca76946 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
@@ -35,12 +34,13 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 
+#include <mach/irqs.h>
+
 #include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
@@ -49,23 +49,9 @@
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
-
 #include "powerdomain.h"
 #include "clockdomain.h"
 
-#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state = PM_SUSPEND_ON;
-static inline bool is_suspending(void)
-{
-	return (suspend_state != PM_SUSPEND_ON);
-}
-#else
-static inline bool is_suspending(void)
-{
-	return false;
-}
-#endif
-
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
@@ -85,7 +71,7 @@ static int omap2_fclks_active(void)
 	return (f1 | f2) ? 1 : 0;
 }
 
-static void omap2_enter_full_retention(void)
+static int omap2_enter_full_retention(void)
 {
 	u32 l;
 
@@ -148,6 +134,8 @@ no_sleep:
 
 	/* Mask future PRCM-to-MPU interrupts */
 	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	return 0;
 }
 
 static int omap2_i2c_active(void)
@@ -244,77 +232,6 @@ out:
 	local_fiq_enable();
 }
 
-#ifdef CONFIG_SUSPEND
-static int omap2_pm_begin(suspend_state_t state)
-{
-	disable_hlt();
-	suspend_state = state;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	u32 wken_wkup, mir1;
-
-	wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-	wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
-	omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
-
-	/* Mask GPT1 */
-	mir1 = omap_readl(0x480fe0a4);
-	omap_writel(1 << 5, 0x480fe0ac);
-
-	omap2_enter_full_retention();
-
-	omap_writel(mir1, 0x480fe0a4);
-	omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
-
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_end(void)
-{
-	suspend_state = PM_SUSPEND_ON;
-	enable_hlt();
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
-	.begin		= omap2_pm_begin,
-	.enter		= omap2_pm_enter,
-	.end		= omap2_pm_end,
-	.valid		= suspend_valid_only_mem,
-};
-#else
-static const struct platform_suspend_ops __initdata omap_pm_ops;
-#endif /* CONFIG_SUSPEND */
-
-/* XXX This function should be shareable between OMAP2xxx and OMAP3 */
-static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
-{
-	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-		 atomic_read(&clkdm->usecount) == 0)
-		clkdm_sleep(clkdm);
-	return 0;
-}
-
 static void __init prcm_setup_regs(void)
 {
 	int i, num_mem_banks;
@@ -356,9 +273,13 @@ static void __init prcm_setup_regs(void)
 	clkdm_sleep(gfx_clkdm);
 
 	/* Enable hardware-supervised idle for all clkdms */
-	clkdm_for_each(clkdms_setup, NULL);
+	clkdm_for_each(omap_pm_clkdms_setup, NULL);
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
+#ifdef CONFIG_SUSPEND
+	omap_pm_suspend = omap2_enter_full_retention;
+#endif
+
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
 	 * stabilisation */
 	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
@@ -459,7 +380,6 @@ static int __init omap2_pm_init(void)
 						    omap24xx_cpu_suspend_sz);
 	}
 
-	suspend_set_ops(&omap_pm_ops);
 	arm_pm_idle = omap2_pm_idle;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b77df735fa6c..027a537d72b2 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,10 +50,6 @@
 #include "sdrc.h"
 #include "control.h"
 
-#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state = PM_SUSPEND_ON;
-#endif
-
 /* pm34xx errata defined in pm.h */
 u16 pm34xx_errata;
 
@@ -75,16 +71,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
 static struct powerdomain *cam_pwrdm;
 
-static inline void omap3_per_save_context(void)
-{
-	omap_gpio_save_context();
-}
-
-static inline void omap3_per_restore_context(void)
-{
-	omap_gpio_restore_context();
-}
-
 static void omap3_enable_io_chain(void)
 {
 	int timeout = 0;
@@ -290,11 +276,6 @@ void omap_sram_idle(void)
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
 
-	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
-	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
-	pwrdm_clear_all_prev_pwrst(core_pwrdm);
-	pwrdm_clear_all_prev_pwrst(per_pwrdm);
-
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
 	case PWRDM_POWER_ON:
@@ -332,8 +313,6 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
-		if (per_next_state == PWRDM_POWER_OFF)
-				omap3_per_save_context();
 	}
 
 	/* CORE */
@@ -399,8 +378,6 @@ void omap_sram_idle(void)
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
 		omap2_gpio_resume_after_idle();
-		if (per_prev_state == PWRDM_POWER_OFF)
-			omap3_per_restore_context();
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -477,50 +454,6 @@ restore:
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t unused)
-{
-	int ret = 0;
-
-	switch (suspend_state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap3_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-/* Hooks to enable / disable UART interrupts during suspend */
-static int omap3_pm_begin(suspend_state_t state)
-{
-	disable_hlt();
-	suspend_state = state;
-	omap_prcm_irq_prepare();
-	return 0;
-}
-
-static void omap3_pm_end(void)
-{
-	suspend_state = PM_SUSPEND_ON;
-	enable_hlt();
-	return;
-}
-
-static void omap3_pm_finish(void)
-{
-	omap_prcm_irq_complete();
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
-	.begin		= omap3_pm_begin,
-	.end		= omap3_pm_end,
-	.enter		= omap3_pm_enter,
-	.finish		= omap3_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
 #endif /* CONFIG_SUSPEND */
 
 
@@ -741,21 +674,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 }
 
 /*
- * Enable hw supervised mode for all clockdomains if it's
- * supported. Initiate sleep transition for other clockdomains, if
- * they are not used
- */
-static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
-{
-	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-		 atomic_read(&clkdm->usecount) == 0)
-		clkdm_sleep(clkdm);
-	return 0;
-}
-
-/*
  * Push functions to SRAM
  *
  * The minimum set of functions is pushed to SRAM for execution:
@@ -824,7 +742,7 @@ static int __init omap3_pm_init(void)
 		goto err2;
 	}
 
-	(void) clkdm_for_each(clkdms_setup, NULL);
+	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
@@ -843,8 +761,8 @@ static int __init omap3_pm_init(void)
 	core_clkdm = clkdm_lookup("core_clkdm");
 
 #ifdef CONFIG_SUSPEND
-	suspend_set_ops(&omap_pm_ops);
-#endif /* CONFIG_SUSPEND */
+	omap_pm_suspend = omap3_pm_suspend;
+#endif
 
 	arm_pm_idle = omap3_pm_idle;
 	omap3_idle_init();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c840689df24a..91e0b1c9b76c 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -83,59 +83,8 @@ static int omap4_pm_suspend(void)
 
 	return 0;
 }
-
-static int omap4_pm_enter(suspend_state_t suspend_state)
-{
-	int ret = 0;
-
-	switch (suspend_state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap4_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int omap4_pm_begin(suspend_state_t state)
-{
-	disable_hlt();
-	return 0;
-}
-
-static void omap4_pm_end(void)
-{
-	enable_hlt();
-	return;
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
-	.begin		= omap4_pm_begin,
-	.end		= omap4_pm_end,
-	.enter		= omap4_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
 #endif /* CONFIG_SUSPEND */
 
-/*
- * Enable hardware supervised mode for all clockdomains if it's
- * supported. Initiate sleep transition for other clockdomains, if
- * they are not used
- */
-static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
-{
-	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-			atomic_read(&clkdm->usecount) == 0)
-		clkdm_sleep(clkdm);
-	return 0;
-}
-
-
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
@@ -247,11 +196,11 @@ static int __init omap4_pm_init(void)
 		goto err2;
 	}
 
-	(void) clkdm_for_each(clkdms_setup, NULL);
+	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
 #ifdef CONFIG_SUSPEND
-	suspend_set_ops(&omap_pm_ops);
-#endif /* CONFIG_SUSPEND */
+	omap_pm_suspend = omap4_pm_suspend;
+#endif
 
 	/* Overwrite the default cpu_do_idle() */
 	arm_pm_idle = omap_default_idle;
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index ca669b50f390..928dbd4f20ed 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -15,8 +15,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
+#include "iomap.h"
 #include "common.h"
-
 #include "prcm_mpu44xx.h"
 #include "cm-regbits-44xx.h"
 
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a1d6154dc120..eac623c7c3d8 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,11 +17,12 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "common.h"
 #include <plat/cpu.h>
 #include <plat/irqs.h>
 #include <plat/prcm.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "vp.h"
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index f6de5bc6b12a..9b3898a3ac9b 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
+#include "iomap.h"
 #include "common.h"
-
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 7479d7ea1379..845c4fd2b125 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -17,7 +17,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/io.h>
 #include "common.h"
 #include <plat/clock.h>
 #include <plat/sdrc.h>
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 791a63cdceb2..1133bb2f632b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,13 +24,15 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include "common.h"
+#include <plat/hardware.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
+#include <plat/sdrc.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "clock.h"
-#include <plat/sdrc.h>
 #include "sdrc.h"
 
 /* Memory timing, DLL mode flags */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index f590afc1f673..0cdd359a128e 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,11 +54,9 @@
 
 struct omap_uart_state {
 	int num;
-	int can_sleep;
 
 	struct list_head node;
 	struct omap_hwmod *oh;
-	struct platform_device *pdev;
 };
 
 static LIST_HEAD(uart_list);
@@ -381,8 +379,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 
 	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
 
-	uart->pdev = pdev;
-
 	oh->dev_attr = uart;
 
 	if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index b5071a47ec39..d4bf904d84ab 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -27,7 +27,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/io.h>
 
 #include <plat/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index f2ea1bd1c691..1f62f23673fb 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -23,10 +23,13 @@
  * MA 02111-1307 USA
  */
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
+#include <plat/hardware.h>
 #include <plat/sram.h>
-#include <mach/io.h>
 
+#include "iomap.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index ff9b9dbcb30e..ee0bfcc1410f 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -29,10 +29,12 @@
  * These crashes may be intermittent.
  */
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
-#include <mach/io.h>
+
 #include <mach/hardware.h>
 
+#include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 76730209fa0e..d4d39ef04769 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -29,10 +29,12 @@
  * These crashes may be intermittent.
  */
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
-#include <mach/io.h>
+
 #include <mach/hardware.h>
 
+#include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 6f5849aaa7c0..df5a21322b0a 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -26,11 +26,12 @@
  * MA 02111-1307 USA
  */
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
-#include <mach/hardware.h>
 
-#include <mach/io.h>
+#include <mach/hardware.h>
 
+#include "iomap.h"
 #include "sdrc.h"
 #include "cm2xxx_3xxx.h"